PDF(120.9 KB) View with Adobe Reader on a variety of devices
Updated:November 15, 2010
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Cisco announces the end-of-sale and end-of life dates for the Cisco 1 GB DDR3 1333 MHz Unbuffered DIMM/PC3-10600/Single Rank 1 Gb DRAMs. The last day to order the affected product(s) is February 11, 2011. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco 1 GB DDR3 1333 MHz Unbuffered DIMM/PC3-10600/Single Rank 1 Gb DRAMs
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
November 12, 2010
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
February 11, 2011
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
May 12, 2011
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.
February 11, 2012
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
February 11, 2012
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
May 9, 2015
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
February 29, 2016
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.