Have an account?

  •   Personalized content
  •   Your products and support

Need an account?

Create an account

End-of-Sale and End-of-Life Announcement for the Cisco ASR 9000 Series Version 1 Power Bundles and Devices

End-of-Life Notice

Available Languages

Download Options

  • PDF
    (330.5 KB)
    View with Adobe Reader on a variety of devices
Updated:December 23, 2019

Available Languages

Download Options

  • PDF
    (330.5 KB)
    View with Adobe Reader on a variety of devices
Updated:December 23, 2019
 

 

Overview

EOL9675 - Amended

Cisco announces the end-of-sale and end-of-life dates for the Cisco ASR 9000 Series Version 1 Power Bundles and Devices. The last day to order the affected product(s) is November 13, 2014. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

End-of-life milestones

Table 1.      End-of-life milestones and dates for the Cisco ASR 9000 Series Version 1 Power Bundles and Devices

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

May 15, 2014

End-of-Sale Date:
HW

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

November 13, 2014

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

February 11, 2015

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

November 13, 2015

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

November 13, 2015

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

February 8, 2019

Last Date of Support:
HW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

November 30, 2019

HW = Hardware          OS SW = Operating System Software        App. SW = Application Software

Product part numbers

Table 2.      Product part numbers affected by this announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

A9K-2KW-DC

2kW DC Power Module

PWR-2KW-DC-V2

2KW DC Power Module Version 2

-

A9K-AC-PEM=

A9K AC Power Entry Module Spare

A9K-AC-PEM-V2=

ASR9K AC Power Entry Module Version 2 Spare

-

A9K-DC-PEM=

A9K DC Power Entry Module Spare

A9K-DC-PEM-V2=

ASR9K DC Power Entry Module Version 2 Spare

-

A9K-3KW-AC

3kW AC Power Module

PWR-3KW-AC-V2

3KW AC Power Module Version 2

-

ASR-9006-AC=

ASR-9006 AC Chassis

ASR-9006-AC-V2=

ASR 9006 AC Chassis Version 2 Spare

This PID will be supported as long as you have upgraded the power supplies.

A9K-2KW-DC=

2kW DC Power Module

PWR-2KW-DC-V2=

2KW DC Power Module Version 2

-

A9K-AC-PEM

A9K AC Power Entry Module

A9K-AC-PEM-V2

^ASR9K AC Power Entry Module Version 2

-

A9K-1.5KW-DC

1.5kW DC Power Module

PWR-2KW-DC-V2

2KW DC Power Module Version 2

-

A9K-1.5KW-DC=

1.5kW DC Power Module

PWR-2KW-DC-V2=

2KW DC Power Module Version 2

-

A9K-3KW-AC=

3kW AC Power Module

PWR-3KW-AC-V2=

3KW AC Power Module Version 2

-

ASR-9006-DC=

ASR-9006 DC Chassis

ASR-9006-DC-V2=

ASR 9006 DC Chassis Version 2 Spare

This PID will be supported as long as you have upgraded the power supplies.

ASR-9010-AC=

ASR-9010 AC Chassis

ASR-9010-AC-V2=

ASR 9010 AC Chassis Version 2 Spare

This PID will be supported as long as you have upgraded the power supplies.

ASR-9006-AC

ASR-9006 AC Chassis

ASR-9006-AC-V2

ASR 9006 AC Chassis with PEM Version 2

This PID will be supported as long as you have upgraded the power supplies.

ASR-9006-DC

ASR-9006 DC Chassis

ASR-9006-DC-V2

ASR 9006 DC Chassis with PEM Version 2

This PID will be supported as long as you have upgraded the power supplies.

ASR-9010-DC

ASR-9010 DC Chassis

ASR-9010-DC-V2

ASR 9010 DC Chassis with PEM Version 2

This PID will be supported as long as you have upgraded the power supplies.

ASR-9010-DC=

ASR-9010 DC Chassis

ASR-9010-DC-V2=

ASR 9010 DC Chassis Version 2 Spare

This PID will be supported as long as you have upgraded the power supplies.

A9K-DC-PEM

A9K DC Power Entry Module

A9K-DC-PEM-V2

^ASR9K DC Power Entry Module Version 2

-

ASR-9010-AC

ASR-9010 AC Chassis

ASR-9010-AC-V2

ASR 9010 AC Chassis with PEM Version 2

This PID will be supported as long as you have upgraded the power supplies.

Product migration options

The Cisco ASR 9000 Version 2 power bundles and devices are available for migration from Version 1.The product IDs ASR9006AC, ASR9006DC, ASR9010AC, and ASR9010DC are part of Version 1 power bundles, which will reach their end-of-sale date at the same time as the associated Version 1 power trays and modules. The Cisco ASR 9006 and ASR 9010 chassis continue their regular support as part of the Cisco ASR 9000 Series, and these can continue to be purchased together with the Version 2 AC or DC power trays. Cisco ASR 9006 and ASR 9010 chassis using the Version 1 AC or DC power tray may if desired be upgraded to use the Version 2 AC or DC power tray. Only those products related to Version 1 power bundles and devices are part of this end-of-sale notice.

Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at: https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.

Customers may be able to continue to purchase the Cisco ASR 9000 Series Version 1 Power Bundles and Devices through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: https://www.cisco.com/go/eos.

Service prices for Cisco products are subject to change after the product End-of-Sale date.

The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For more information

For more Information about the Cisco ASR 9000 Series Version 2 Power Bundles and Devices, visit https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/data_sheet_c78-501767.html, or contact your local account representative.

For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/en/US/products/products_end-of-life_policy.html.

For more information about the Cisco Product Warranties, go to: https://www.cisco.com/en/US/products/prod_warranties_listing.html.

To subscribe to receive end-of-life/end-of-sale information, go to: https://www.cisco.com/cisco/support/notifications.html.

Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.

Learn more