PDF(142.1 KB) View with Adobe Reader on a variety of devices
Updated:March 27, 2013
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Cisco announces the end-of-sale and end-of life dates for the Cisco MDS 9000 48-Port 8-Gbps Fibre Channel Switching Module. The last day to order the affected product(s) is July 31, 2013. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-Life Milestones and Dates for the Cisco MDS 9000 48-Port 8-Gbps Fibre Channel Switching Module
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
October 19, 2012
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
July 31, 2013
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
October 29, 2013
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.
July 31, 2014
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
July 31, 2014
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
October 26, 2017
Last Date of Support: HW
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.
July 31, 2018
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Cisco MDS 9000 32-Port 8-Gbps Advanced Fibre Channel Switching Module:
The 32-port 8-Gbps Advanced switching module delivers full-duplex aggregate performance of 512 Gbps, making this module well-suited for the attachment of high-performance 8-Gbps storage subsystems or either 8- or 10-Gbps Inter-Switch Links (ISLs).
Cisco MDS 9000 48-Port 8-Gbps Advanced Fibre Channel Switching Module:
For large-scale storage networking environments, the 48-port 8-Gbps Advanced Fibre Channel switching module delivers full-duplex aggregate backplane switching performance of 512 Gbps, making this module ideal for high-performance and virtualized servers. With Arbitrated Local Switching, the 48-port 8-Gbps Advanced module delivers full-duplex aggregate performance of 768 Gbps across locally switched ports on the module. Arbitrated Local Switching on the 48-port 8-Gbps Advanced Fibre Channel module is well-suited for the deployment of dense virtual machine clusters with locally mapped storage.
Cisco MDS 9000 Family 8-Gbps Advanced Fibre Channel Switching Modules provide up to 528 ports with an aggregate bandwidth of 8.4 terabits per second (Tbps). Cisco MDS 9000 Family 8-Gbps Advanced Fibre Channel Switching Modules also provide Cisco VMpath technology, which enables advanced virtual machine-aware SAN provisioning and monitoring for virtualized data centers. Cisco MDS 9000 Family Advanced Fibre Channel Switching Modules are hot-swappable and compatible with 1/2/4/8- and 10-Gbps interfaces.
Table 2. Product Part Numbers Affected by This Announcement
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at
Customers may be able to continue to purchase the Cisco MDS 9000 48-Port 8-Gbps Fibre Channel Switching Module through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to:
Service prices for Cisco products are subject to change after the product End of Sale date.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.