End-of-Sale and End-of-Life Announcement for the Cisco 1-Port GBIC Gigabit Ethernet Network Module
PDF(174.2 KB) View with Adobe Reader on a variety of devices
Updated:March 13, 2015
Cisco announces the end-of-sale and end-of life dates for the Cisco 1-Port GBIC Gigabit Ethernet Network Module. The last day to order the affected product(s) is April 1, 2010. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco 1-Port GBIC Gigabit Ethernet Network Module
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
October 1, 2009
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
April 1, 2010
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
June 30, 2010
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
April 1, 2011
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
April 1, 2011
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
June 27, 2014
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
March 31, 2015
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Replacement Product Part Number
Replacement Product Description
1 Port GE Network Module
GigE High Speed WIC With One SFP Slot
1 Port GE Network Module
GigE high speed WIC with one SFP slot
Product Migration Options
Customers are encouraged to migrate to the Cisco Gigabit Ethernet High-Speed WAN Interface Card with one SFP slot (product ID number HWIC-1GE-SFP), which fits into the smaller high-speed WAN interface card slot in the Cisco Integrated Series Routers. This card costs less and consumes less power than the Cisco 1-port Gigabit Ethernet Network Module, which uses the Cisco Gigabit Interface Converter (GBIC) instead of an SFP interface. Information about the Cisco Gigabit Ethernet HWIC can be found at:
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at
Customers may be able to continue to purchase the Cisco 1-Port GBIC Gigabit Ethernet Network Module through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.