为 VPDN 配置 TACACS+ 认证

下载选项

  • PDF     (400.1 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (99.1 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (108.3 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2009 年 5 月 14 日
文档 ID:12429

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

使用虚拟专用拨号网络 (VPDN) 可以将服务中的专用网络拨号分布到远程接入服务器（定义为 L2TP 接入集中器 [LAC]）。在点对点协议 (PPP) 客户端拨入 LAC 后，LAC 会确定应该将该 PPP 会话转发到该客户端的 L2TP 网络服务器 (LNS)，后者随后将对用户进行身份身份并启动 PPP 协商。完成 PPP 设置后，所有帧都将通过 LAC 发送到客户端和 LNS。

此示例配置允许您对虚拟专用拨号网络 (VPDN) 使用 TACACS+ 身份验证。LAC 将查询 TACACS+ 服务器，确定将用户转发到哪个 LNS，然后建立适当的隧道。

有关 VPDN 的详细信息，请参阅了解 VPDN。

先决条件

要求

本文档没有任何特定的要求。

使用的组件

本文档中的信息基于以下软件和硬件版本：

  • Cisco Secure ACS for UNIX 2.x.x 版及更高版本或 TACACS+ 免费软件

  • Cisco IOS®软件版本11.2及以上版本

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。

规则

有关文件规则的更多信息请参见“ Cisco技术提示规则”。

配置

本节提供了配置本文档中所述功能所需的信息。

在此示例中，用户为“jsmith@hp.com”，其密码为“test”。在“jsmith@hp.com”拨入 ISP 路由器后，ISP 路由器将“hp.com”用户 ID 发送到 ISP TACACS+ 服务器。ISP 服务器会发现“hp.com”用户 ID，并将其隧道 ID（“isp”）、家庭网关 (HGW) 路由器的 IP 地址 (10.31.1.50)、网络接入服务器 (NAS) 密码（“Hello”）以及网关密码（“there”）发送回 ISP 路由器。

ISP 路由器将启动隧道并连接到 HGW 路由器，后者将用户 ID“hp-gw”的密码（“there”）和用户 ID“isp”的密码（“Hello”）转发到 HGW TACACS+ 服务器。在建立隧道后，ISP 路由器将拨入的用户的用户 ID（“jsmith@hp.com”）和密码（“test”）转发到 HGW 路由器。在 HGW 服务器上对此用户进行身份验证。在本文档中的示例配置中，ISP 路由器主机名是“koala”，并且 HGW 路由器主机名是“thing_one”。

注意：要查找有关本文档中所用命令的其他信息，请使用命令查找工具(仅限注册客户)。

网络图

本文档使用此图所示的网络设置。

vpdn_tac.gif

TACACS+ 服务器配置

本文档使用此处所示的服务器配置。

TACACS+ 免费软件 


!--- This user is on the ISP TACACS+ server. !--- The profile includes the Tunnel ID ("isp"), the IP address !--- of the Peer (10.31.1.50), !--- and the passwords used to authenticate the tunnel. !--- The ISP uses these attibutes to establish the tunnel.

user = hp.com {
service = ppp protocol = vpdn {
tunnel-id = isp
ip-addresses = "10.31.1.50"
nas-password = "hello"
gw-password = "there"
}
}


!--- The next three users are on the HGW server.

user = isp {
chap = cleartext "hello"
service = ppp protocol = ip {
default attribute = permit
}
}

user = hp-gw {
chap = cleartext "there"
service = ppp protocol = ip {
default attribute = permit
}
}

user = jsmith@hp.com {
chap = cleartext "test"
service = ppp protocol = ip {
default attribute = permit
}
}

Cisco Secure ACS for UNIX 2.x.x 


!--- This user is on the ISP server.

# ./ViewProfile -p 9900 -u hp.com
User Profile Information
user = hp.com{
profile_id = 83 
profile_cycle = 1 
service=ppp {
protocol=vpdn {
set tunnel-id=isp
set ip-addresses="10.31.1.50"
set nas-password="hello"
set gw-password="there"
} 
protocol=lcp {
} 
} 

}


!--- The next three users are on the HGW server. !--- The next two usernames are used to authenticate the LAC !--- during tunnel initialization.

# ./ViewProfile -p 9900 -u isp
User Profile Information
user = isp{
profile_id = 84 
profile_cycle = 1 
password = chap "********" 
service=ppp {
protocol=ip {
default attribute=permit
} 
protocol=lcp {
} 
} 

}

# ./ViewProfile -p 9900 -u hp-gw
User Profile Information
user = hp-gw{
profile_id = 82 
profile_cycle = 1 
password = chap "********" 
service=ppp {
protocol=ip {
default attribute=permit
} 
protocol=lcp {
} 
} 

}

!--- This username is used to authenticate the end user !--- after the tunnel is established.

# ./ViewProfile -p 9900 -u jsmith@hp.com
User Profile Information
user = jsmith@hp.com{
profile_id = 85 
profile_cycle = 1 
password = chap "********" 
service=ppp {
protocol=ip {
default attribute=permit
} 
protocol=lcp {
} 
} 

}

路由器配置

本文档使用此处所示的配置。

ISP 路由器配置 
koala#show running config
Building configuration...

Current configuration:
!
version 11.2
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname koala
!
aaa new-model
aaa authentication ppp default tacacs+ none
aaa authorization network tacacs+ none
aaa accounting network start-stop tacacs+

enable password ww
!

!--- VPDN is enabled.

vpdn enable
!
interface Ethernet0
ip address 10.31.1.5 255.255.255.0
!
interface Serial0
shutdown
!
interface Serial1
shutdown
!
interface Async1
ip unnumbered Ethernet0
encapsulation ppp
async mode dedicated
no cdp enable
ppp authentication chap
!
ip default-gateway 10.31.1.1
no ip classless
ip route 0.0.0.0 0.0.0.0 10.31.1.1
!

!--- Specify the TACACS server information on the NAS.

tacacs-server host 171.68.120.194
tacacs-server key cisco
no tacacs-server directed-request
snmp-server community public RW
snmp-server enable traps config
!
line con 0
password ww
line 1 16
password ww
autoselect ppp
modem InOut
transport input all
stopbits 1
rxspeed 115200
txspeed 115200
flowcontrol hardware
line aux 0
line vty 0 4
exec-timeout 0 0
password ww
!
end

HGW 路由器配置 
thing_one#show running config
Building configuration...

Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname thing_one
!
aaa new-model
aaa authentication ppp default tacacs+ none
aaa authorization network tacacs+ none
enable password ww
!

!--- Enable VPDN.

vpdn enable

!--- Specify the remote host ("isp" on the network access server) !--- and the local name ("hp-gw" on the home gateway) to use to authenticate. !--- Also specify the virtual template to use. !--- The local name and the remote host name must match !--- the ones in the TACACS server.

vpdn incoming isp hp-gw virtual-template 1
!
interface Loopback0
shutdown
!
interface Ethernet0
ip address 10.31.1.50 255.255.255.0
!
interface Virtual-Template1

!--- Create a virtual template interface.

ip unnumbered Ethernet0

!--- Un-number the Virtual interface to an available LAN interface.

peer default ip address pool async

!--- Use the pool "async" to assign the IP address for incoming connections.

ppp authentication chap

!--- Use CHAP authentication for the incoming connection.

!
interface Serial0
shutdown
!
interface Serial1
shutdown
!
ip local pool async 15.15.15.15
no ip classless
ip route 0.0.0.0 0.0.0.0 10.31.1.1
!
tacacs-server host 171.68.118.101
no tacacs-server directed-request
tacacs-server key cisco

!--- Specify the TACACS+ server information on the NAS.

!
line con 0
exec-timeout 0 0
line 1 8
line aux 0
line vty 0 4
!
end

验证

当前没有可用于此配置的验证过程。

故障排除

本部分提供的信息可用于对配置进行故障排除。

故障排除命令

注意：在发出debug命令之前，请参阅有关Debug命令的重要信息。

  • debug aaa authentication — 显示有关身份验证、授权和记帐 (AAA)/TACACS+ 身份验证的信息。

  • debug aaa authorization - 显示有关 AAA/TACACS+ 授权的信息。

  • debug ppp negotiation — 显示在 PPP 启动期间传输的 PPP 数据包，在此启动期间将协商 PPP 选项。

  • debug tacacs+ -显示与TACACS+相关的详细调试信息。

  • debug vpdn errors — 显示阻止建立 PPP 隧道的错误或导致已建立的隧道关闭的错误。

  • debug vpdn events - 显示正常 PPP 隧道建立或关闭过程中的事件的相关消息。

  • debug vpdn l2f-errors -显示妨碍建立第二层或妨碍其正常操作的第二层协议错误。

  • debug vpdn l2f-events— 显示第2层的PPP隧道正常建立或关闭过程中的事件相关消息。

  • debug vpdn l2f-packets— 显示有关第2层转发协议报头和状态的消息。

  • debug vpdn packets— 显示VPDN的隧道正常建立或关闭过程中的第2层隧道协议(L2TP)错误和事件。

  • debug vtemplate - 显示从虚拟模板克隆虚拟访问接口时到虚拟访问接口因呼叫结束而关闭时虚拟访问接口的克隆信息。

调试输出示例

提供了以下调试以供参考。

ISP 路由器正常调试 

koala#show debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
AAA Accounting debugging is on
VPN:
VPN events debugging is on
VPN errors debugging is on
koala#
%LINK-3-UPDOWN: Interface Async1, changed state to up
15:04:47: VPDN: Looking for tunnel -- hp.com --
15:04:47: AAA/AUTHEN: create_user (0x15FA80) user='hp.com' ruser='' 
   port='Async1' rem_addr='' authen_type=NONE service=LOGIN priv=0
15:04:47: AAA/AUTHOR/VPDN: : (2445181346): user='hp.com'
15:04:47: AAA/AUTHOR/VPDN: : (2445181346): send AV service=ppp
15:04:47: AAA/AUTHOR/VPDN: : (2445181346): send AV protocol=vpdn
15:04:47: AAA/AUTHOR/VPDN: : (2445181346): Method=TACACS+
15:04:47: AAA/AUTHOR/TAC+: (2445181346): user=hp.com
15:04:47: AAA/AUTHOR/TAC+: (2445181346): send AV service=ppp
15:04:47: AAA/AUTHOR/TAC+: (2445181346): send AV protocol=vpdn
15:04:47: TAC+: (2445181346): received author response status = PASS_ADD

15:04:47: AAA/AUTHOR (2445181346): Post authorization status = PASS_ADD
15:04:47: AAA/AUTHOR/VPDN: Processing AV service=ppp
15:04:47: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
15:04:47: AAA/AUTHOR/VPDN: Processing AV tunnel-id=isp
15:04:47: AAA/AUTHOR/VPDN: Processing AV ip-addresses=10.31.1.50
15:04:47: AAA/AUTHOR/VPDN: Processing AV nas-password=hello
15:04:47: AAA/AUTHOR/VPDN: Processing AV gw-password=there
15:04:47: VPDN: Get tunnel info with NAS isp GW hp.com, IP 10.31.1.50

!--- The TACACS+ server returns the attributes the !--- NAS should use for the tunnel. !--- The tunnel-id is "ISP" and the IP address of HGW is 10.31.1.50.

15:04:47: AAA/AUTHEN: free_user (0x15FA80) user='hp.com' ruser='' 
   port='Async1' rem_addr='' authen_type=NONE service=LOGIN priv=0
15:04:47: VPDN: Forward to address 10.31.1.50
15:04:47: As1 VPDN: Forwarding...
15:04:47: AAA/AUTHEN: create_user (0x118008) user='jsmith@hp.com' ruser=''
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1
15:04:47: As1 VPDN: Bind interface direction=1
15:04:47: As1 VPDN: jsmith@hp.com is forwarded
%LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, changed state to up
15:04:49: AAA/ACCT: NET acct start. User jsmith@hp.com, Port Async1: Async1

!--- User finishes and disconnects.

%LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, 
   changed state to down
%LINK-5-CHANGED: Interface Async1, changed state to reset
15:05:27: As1 VPDN: Cleanup
15:05:27: As1 VPDN: Reset
15:05:27: As1 VPDN: Reset
15:05:27: As1 VPDN: Unbind interface
15:05:27: AAA/ACCT: Network acct stop. User jsmith@hp.com, Port Async1:
task_id=2 timezone=UTC service=vpdn bytes_in=1399 bytes_out=150 paks_in=27
   paks_out=9 elapsed_time=38 
%LINK-3-UPDOWN: Interface Async1, changed state to down
15:05:30: AAA/AUTHEN: free_user (0x118008) user='jsmith@hp.com' ruser=''
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1
koala#

HGW 路由器正常调试 

thing_one#show debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
AAA Accounting debugging is on
VPN:
VPN events debugging is on
VPN errors debugging is on
VTEMPLATE:
Virtual Template debugging is on
thing_one#

15:04:46: AAA/AUTHEN: create_user (0x15E6E0) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: TAC+: ver=192 id=969200103 received AUTHEN status = PASS
15:04:46: AAA/AUTHEN: free_user (0x15E6E0) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: AAA/AUTHEN (3252085483): status = PASS
15:04:46: AAA/AUTHEN: free_user (0x15CBEC) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: AAA/AUTHEN: create_user (0x15F1B8) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: AAA/AUTHEN/START (3897539709): port='' list='default' 
   action=LOGIN service=PPP
15:04:46: AAA/AUTHEN/START (3897539709): found list default
15:04:46: AAA/AUTHEN/START (3897539709): Method=TACACS+
15:04:46: TAC+: send AUTHEN/START packet ver=193 id=3897539709
15:04:46: TAC+: ver=192 id=3897539709 received AUTHEN status = GETPASS
15:04:46: AAA/AUTHEN: create_user (0x15E6F0) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: TAC+: ver=192 id=2306139011 received AUTHEN status = PASS
15:04:46: AAA/AUTHEN: free_user (0x15E6F0) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: AAA/AUTHEN (3897539709): status = PASS
15:04:46: VPDN: Chap authentication succeeded for isp

!--- The LAC ("ISP") is succesfully authenticated.

15:04:46: AAA/AUTHEN: free_user (0x15F1B8) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: Vi1 VTEMPLATE: Reuse Vi1, recycle queue size 0
15:04:46: Vi1 VTEMPLATE: Set default settings with no ip address
15:04:47: Vi1 VTEMPLATE: Hardware address 00e0.1e68.942c
15:04:47: Vi1 VPDN: Virtual interface created for jsmith@hp.com
15:04:47: Vi1 VPDN: Set to Async interface
15:04:47: Vi1 VPDN: Clone from Vtemplate 1 filterPPP=0 blocking
15:04:47: Vi1 VTEMPLATE: Has a new cloneblk vtemplate, now it has vtemplate
15:04:47: Vi1 VTEMPLATE: Undo default settings
15:04:47: Vi1 VTEMPLATE: ************* CLONE VACCESS1 *****************
15:04:47: Vi1 VTEMPLATE: Clone from vtemplate1
interface Virtual-Access1
no ip address
encap ppp
ip unnum eth 0
peer default ip address pool async 
ppp authen chap
end

%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
15:04:48: Vi1 VPDN: Bind interface direction=2
15:04:48: Vi1 VPDN: PPP LCP accepted sent & rcv CONFACK
15:04:48: Vi1 VPDN: Virtual interface iteration
15:04:48: AAA/AUTHEN: create_user (0x161688) user='jsmith@hp.com' ruser=''
   port='Virtual-Access1' rem_addr='async' authen_type=CHAP service=PPP priv=1
15:04:48: AAA/AUTHEN/START (580760432): port='Virtual-Access1' list='' 
   action=LOGIN service=PPP
15:04:48: AAA/AUTHEN/START (580760432): using "default" list
15:04:48: AAA/AUTHEN/START (580760432): Method=TACACS+
15:04:48: TAC+: send AUTHEN/START packet ver=193 id=580760432
15:04:48: Vi1 VPDN: Virtual interface iteration
15:04:49: TAC+: ver=192 id=580760432 received AUTHEN status = GETPASS

!--- Authenticate user jsmith@hp.com with the TACACS+ server.

15:04:49: AAA/AUTHEN: create_user (0x1667C0) user='jsmith@hp.com' ruser=''
 port='Virtual-Access1' rem_addr='async' authen_type=CHAP service=PPP priv=1
15:04:49: TAC+: ver=192 id=2894253624 received AUTHEN status = PASS
15:04:49: AAA/AUTHEN: free_user (0x1667C0) user='jsmith@hp.com' ruser=''
 port='Virtual-Access1' rem_addr='async' authen_type=CHAP service=PPP priv=1
15:04:49: AAA/AUTHEN (580760432): status = PASS
15:04:49: AAA/AUTHOR/LCP Vi1: Authorize LCP
15:04:49: AAA/AUTHOR/LCP: Virtual-Access1: (687698354): user='jsmith@hp.com'
15:04:49: AAA/AUTHOR/LCP: Virtual-Access1: (687698354): send AV service=ppp
15:04:49: AAA/AUTHOR/LCP: Virtual-Access1: (687698354): send AV protocol=lcp
15:04:49: AAA/AUTHOR/LCP: Virtual-Access1: (687698354): Method=TACACS+
15:04:49: AAA/AUTHOR/TAC+: (687698354): user=jsmith@hp.com
15:04:49: AAA/AUTHOR/TAC+: (687698354): send AV service=ppp
15:04:49: AAA/AUTHOR/TAC+: (687698354): send AV protocol=lcp
15:04:49: TAC+: (687698354): received author response status = PASS_ADD
15:04:49: AAA/AUTHOR (687698354): Post authorization status = PASS_ADD
15:04:49: AAA/ACCT: NET acct start. User jsmith@hp.com, Port Virtual-Access1:
 Virtual-Access1
15:04:49: AAA/AUTHOR/FSM Vi1: (0): Can we start IPCP?
15:04:49: AAA/AUTHOR/FSM: Virtual-Access1: (3562892028): user='jsmith@hp.com'
15:04:49: AAA/AUTHOR/FSM: Virtual-Access1: (3562892028): send AV service=ppp
15:04:49: AAA/AUTHOR/FSM: Virtual-Access1: (3562892028): send AV protocol=ip
15:04:49: AAA/AUTHOR/FSM: Virtual-Access1: (3562892028): Method=TACACS+
15:04:49: AAA/AUTHOR/TAC+: (3562892028): user=jsmith@hp.com
15:04:49: AAA/AUTHOR/TAC+: (3562892028): send AV service=ppp
15:04:49: AAA/AUTHOR/TAC+: (3562892028): send AV protocol=ip
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, 
   changed state to up
15:04:49: TAC+: (3562892028): received author response status = PASS_ADD
15:04:49: AAA/AUTHOR (3562892028): Post authorization status = PASS_ADD

!--- IPCP negotiation begins.

15:04:49: AAA/AUTHOR/FSM Vi1: We can start IPCP
15:04:50: AAA/AUTHOR/IPCP Vi1: Start. Her address 0.0.0.0, we want 0.0.0.0
15:04:50: AAA/AUTHOR/IPCP Vi1: Processing AV service=ppp
15:04:50: AAA/AUTHOR/IPCP Vi1: Processing AV protocol=ip
15:04:50: AAA/AUTHOR/IPCP Vi1: Authorization succeeded
15:04:50: AAA/AUTHOR/IPCP Vi1: Done. Her address 0.0.0.0, we want 0.0.0.0
15:04:51: AAA/AUTHOR/IPCP Vi1: Start. Her address 0.0.0.0, 
   we want 15.15.15.15
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV service=ppp
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV protocol=ip
15:04:51: AAA/AUTHOR/IPCP Vi1: Authorization succeeded
15:04:51: AAA/AUTHOR/IPCP Vi1: Done. Her address 0.0.0.0, 
   we want 15.15.15.15
15:04:51: AAA/AUTHOR/IPCP Vi1: Start. Her address 15.15.15.15, 
   we want 15.15.15.15
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   user='jsmith@hp.com'
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   send AV service=ppp
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   send AV protocol=ip
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   send AV addr*15.15.15.15
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   Method=TACACS+
15:04:51: AAA/AUTHOR/TAC+: (3193852847): user=jsmith@hp.com
15:04:51: AAA/AUTHOR/TAC+: (3193852847): send AV service=ppp
15:04:51: AAA/AUTHOR/TAC+: (3193852847): send AV protocol=ip
15:04:51: AAA/AUTHOR/TAC+: (3193852847): send AV addr*15.15.15.15
15:04:51: TAC+: (3193852847): received author response status = PASS_ADD
15:04:51: AAA/AUTHOR (3193852847): Post authorization status = PASS_ADD
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV service=ppp
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV protocol=ip
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV addr*15.15.15.15
15:04:51: AAA/AUTHOR/IPCP Vi1: Authorization succeeded
15:04:51: AAA/AUTHOR/IPCP Vi1: Done. Her address 15.15.15.15, 
   we want 15.15.15.15

!--- User finishes and disconnects.

15:05:24: Vi1 VPDN: Reset
15:05:24: Vi1 VPDN: Reset
%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
15:05:24: Vi1 VPDN: Cleanup
15:05:24: Vi1 VPDN: Reset
15:05:24: Vi1 VPDN: Reset
15:05:24: Vi1 VPDN: Unbind interface
15:05:24: Vi1 VTEMPLATE: Free vaccess
15:05:24: Vi1 VPDN: Reset
15:05:24: Vi1 VPDN: Reset
15:05:24: AAA/ACCT: Network acct stop. User jsmith@hp.com, 
   Port Virtual-Access1:
task_id=2 timezone=UTC service=ppp protocol=ip addr=15.15.15.15 
   bytes_in=564 
bytes_out=142 paks_in=15 paks_out=8 elapsed_time=35 
15:05:24: AAA/AUTHEN: free_user (0x161688) user='jsmith@hp.com' ruser=''
   port='Virtual-Access1' rem_addr='async' 
   authen_type=CHAP service=PPP priv=1
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
 changed state to down
15:05:25: VTEMPLATE: Clean up dirty vaccess queue, size 1
15:05:25: Vi1 VTEMPLATE: Found a dirty vaccess clone with vtemplate
15:05:25: Vi1 VTEMPLATE: ************ UNCLONE VACCESS1 **************
15:05:25: Vi1 VTEMPLATE: Unclone to-be-freed command#5
interface Virtual-Access1
default ppp authen chap
default peer default ip address pool async 
default ip unnum eth 0
default encap ppp
default ip address
end

15:05:26: Vi1 VTEMPLATE: Set default settings with no ip address
15:05:26: Vi1 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
15:05:26: Vi1 VTEMPLATE: Add vaccess to recycle queue, queue size=1
thing_one#

对 ISP 路由器上的失败连接的调试 

koala#show debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
AAA Accounting debugging is on
VPN:
VPN events debugging is on
VPN errors debugging is on
koala#

!--- Problem 1: !--- The ISP TACACS+ server is down. !--- There is no output on the HGW router !--- because the call has not gone that far.

AAA/AUTHOR (3015476150): Post authorization status = ERROR
AAA/AUTHOR/VPDN: : (3015476150): Method=NOT_SET
AAA/AUTHOR/VPDN: : (3015476150): no methods left to try
AAA/AUTHOR (3015476150): Post authorization status = ERROR
VPDN: (hp.com) Authorization failed, could not talk to AAA server or
 local tunnel problem

!--- Problem 2: !--- Userid hp.com is not in the ISP server. !--- There is no output on the Gateway router !--- because the call has not gone that far.

TAC+: (894828802): received author response status = PASS_ADD
AAA/AUTHOR (894828802): Post authorization status = PASS_ADD
VPDN: (hp.com) Authorization failed, had talked to AAA server;
   but both Tunnel ID and IP address are missing
AAA/AUTHEN: free_user (0x16A6E4) user='hp.com' ruser='' 
   port='Async1' rem_addr='' authen_type=NONE service=LOGIN priv=0
AAA/AUTHEN: create_user (0x16CA8C) user='jsmith@hp.com' ruser='' 
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1
AAA/AUTHEN/START (1904487288): port='Async1' list='' 
   action=LOGIN service=PPP
AAA/AUTHEN/START (1904487288): using "default" list
AAA/AUTHEN (1904487288): status = UNKNOWN
AAA/AUTHEN/START (1904487288): Method=TACACS+
TAC+: send AUTHEN/START packet ver=193 id=1904487288
TAC+: ver=193 id=1904487288 received AUTHEN status = FAIL
AAA/AUTHEN (1904487288): status = FAIL

对 HGW 路由器上的失败连接的调试 

thing_one#show debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
AAA Accounting debugging is on
VPN:
VPN events debugging is on
VPN errors debugging is on
VTEMPLATE:
Virtual Template debugging is on
thing_one#

!--- Problem 1: !--- The problem is in the tunnel definition on HGW router. !--- In the HGW configuration, vpdn incoming hp-gw isp virtual-template 1 !--- is inserted instead of vpdn incoming isp hp-gw virtual-template 1 !--- The debug vpdn l2f-errors command displays.

L2F: Couldn't find tunnel named isp
L2F: Couldn't find tunnel named isp

!--- Problem 2: !--- This message appears when User hp-gw is not in the HGW server.

TAC+: ver=192 id=1920941753 received AUTHEN status = FAIL
AAA/AUTHEN: free_user (0x138C34) user='hp-gw' ruser='' 
   port='' rem_addr='' authen_type=CHAP service=PPP priv=1
AAA/AUTHEN (3006335673): status = FAIL
VPDN: authentication failed, couldn't find user information for hp-gw

!--- Problem 3: !--- This appears when user isp is not in the HGW server.

TAC+: ver=192 id=1917558147 received AUTHEN status = FAIL
AAA/AUTHEN: free_user (0x15F20C) user='isp' ruser='' 
   port='' rem_addr='' authen_type=CHAP service=PPP priv=1
AAA/AUTHEN (1949507921): status = FAIL
VPDN: authentication failed, couldn't find user information for isp

!--- Problem 4: !--- This message appears when User jsmith@hp.com is !--- not in the HGW server:

TAC+: ver=192 id=755036341 received AUTHEN status = FAIL
AAA/AUTHEN: free_user (0x15F89C) user='jsmith@hp.com' ruser=''
   port='Virtual-Access1' rem_addr='async' authen_type=CHAP service=PPP priv=1
AAA/AUTHEN (2606986667): status = FAIL

相关信息

修订历史记录

版本 发布日期 备注
1.0
06-Dec-2001
初始版本

此文档是否有帮助?

Feedback反馈

联系我们

本文档适用于以下产品