Access Point Specifications

Technical Specifications

The following table lists the technical specifications for the Cisco Catalyst IW6300 Heavy Duty Series Access Points. For detailed specifications, refer to the Cisco Catalyst IW6300 Heavy Duty Series Access Point data sheet at:

https://www.cisco.com/c/en/us/products/collateral/wireless/industrial-wireless-6300-series/datasheet-c78-742907.html

Table 1. Technical Specifications

Category

IW-6300H-AC-x-K9

IW-6300H-DC-x–K9

IW-6300H-DCW-x-K9

Size

9.7 in. x 11 in. x 5.6 in. (24.7 cm x 28 cm x 14.2 cm)

9.7 in. x 11 in. x 3.8 in. (24.2 cm x 28 cm x 9.65 cm)

9.7 in. x 11 in. x 5.6 in. (24.7 cm x 28 cm x 14.2 cm)

Weight

13.3 lbs (6.03 kg)

9.8 lbs (4.45 kg)

12.7 lbs (5.76 kg)

Power sources

100 to 240 VAC, 1.3A,50–60 Hz

44 to 57VDC, 1.2A

10.8 to 36Vdc, 5.9A

Antenna connectors

Four Type N antenna connectors for 2.4 GHz radio and 5 GHz 802.11ac radio (depends on configuration)

Ethernet connectors

  • One 100/1000M SFP for WAN

  • One 10/100/1000M RJ45 for WAN (UPoE or PoE+ in)

  • Two 10/100/1000M RJ45 for LAN (802.3at or 802.3af out)

Operating temperature

-40° to 75°C (-40° to 167°F) without solar loading, still air

Storage temperature

-40° to 85°C (-40° to 185°F)

Humidity

10 to 90% noncondensing

Environmental ratings

UL 50E (type 4X)

EN/IEC 60529 (IP66 and IP67)

UL/CSA/IEC 60950-22 outdoor rating

Wind resistance

Wind resistance:

  • Up to 100 MPH sustained winds

  • Up to 165 MPH wind gusts

WW EMC-Emissions:

CLASS: A

FCC 47 CFR Part 15B

ICES-003 Issue 6: 2016

CISPR 22

EN 55022

CISPR32 Edition 2

EN 55032:2015

EN 61000-3-2: 2014 (Applicable to IW-6300H-AC-X-K9 only)

EN 61000-3-3:2013 (Applicable to IW-6300H-AC-X-K9 only)

VCCI CLASS A

AS/NZ CISPR32

WW EMC-Immunity

CISPR24: 2010 + A1: 2015

EN 55024: 2010 + A1: 2015

CISPR35, EN 55035

EN 300386 V1.6.1

Radio (Wi-Fi)

FCC Part 15.247, 15.407 

FCC 2.1091

RSS - 247

RSS-102 

AS/NZS 4268 2017

MIC Article 2 paragraph 1 item (19)-2,3,3-2

KCC Notice No. 2013-1

EN 300 328 v2.1.1, v1.9.1, v1.8.1

EN 301 893 v2.1.1, v1.8.1, v1.7.1

EN 62311

LP0002: 2018

Regulatory Domain Support:

FCC (Americas Middle East, Africa, and parts of Asia)

ETSI (Europe, Middle East, Africa, and parts of Asia)

TELEC (Japan)

KCC (Korea)

Radio EMC

EN 301 489 – 17

KN 301 489 – 17

Safety

UL/CSA/EN/IEC 60950-1:2016 +A1:2010 +A11:2009 +A12:2011 +A2:2013

IEC 60950-1

UL/CSA/EN/IEC 62368-1

Ingress (water and dust) Protection

UL 50E (type 4X)

EN/IEC 60529 (IP66 and IP67)

UL/CSA/IEC 60950-22 Outdoor rating

Power Consumption Budget

The following table lists the power consumption budget for the IW-6300H access point configurations.

Table 2. IW-6300H Power Consumption

Element

Absolute Max Power (Watts)

Total power budget when using AC power source (100-240VAC)

28.0

Total power budget when using DC power source (44-57VDC)

19.7

Total power budget when using DCW power source (10.8-36VDC)

27.9

Optional components

2 clients of 802.3af (PoE) connected

30.8

1 client of 802.3at (PoE+) connected

30.0

Fiber used as backhaul

1.2

USB 2.0/3.0 add-on module connected

4.5

Total Power Consumption

Total power consumption when AC powered (100-240VAC)

64.5

Total power consumption when DC powered (44-57VDC)

56.2

Total power consumption when DCW powered (10.8-36VDC)

64.4


Note

For IW-6300H-DC-x-K9, when you use DC as input power option, if you want to output 802.3at type 2 PoE out power, DC input must >=51V. If you want to output 802.3af (802.3at type 1) PoE out power, DC input must >=45V.