IPNE Service Configuration Mode Commands

Mode

The IPNE Service Configuration Mode is used to configure and manage the IPNE Service.

Exec > Global Configuration > Context Configuration > IPNE Service Configuration

configure > context context_name > ipne-service ipne_service_name

Entering the above command sequence results in the following prompt:

[ context_name]host_name (config-ipne-service)#
Important:

The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).

end

Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

Syntax Description

end

Usage Guidelines

Use this command to return to the Exec mode.

exit

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

Syntax Description

exit

Usage Guidelines

Use this command to return to the parent configuration mode.

ipne-endpoint

Creates and configures an IPNE endpoint and enters the IPNE endpoint configuration mode. An IPNE endpoint is a combination of a local IPP address, a peer address and, optionally, a port.

Product

MME

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > IPNE Service Configuration

configure > context context_name > ipne-service ipne_service_name

Entering the above command sequence results in the following prompt:

[ context_name]host_name (config-ipne-service)#

Syntax

Syntax Description

[ no ] ipne-endpoint

no

Causes the system to delete the IPNE endpoint configuration from the IPNE service configuration.

Usage Guidelines

Use this command to create an IPNE endpoint and to enter the IPNE endpoint sub-configuration mode.

Examples

Use the following command to access commands to configure the IPNE endpoint:
ipne-endpoint