- IGMP Profile Configuration Mode Commands
- IKEv2 Security Association Configuration Mode Commands
- IMEI Profile Configuration Mode
- IMEI-TAC-Group Configuration Mode Commands
- IMS Authorization Service Configuration Mode Commands
- IMS Sh Service Configuration Mode Commands
- IPMS Client Configuration Mode Commands
- IPNE Endpoint Configuration Mode Commands
- IPNE Service Configuration Mode Commands
- IPSec Transform Set Configuration Mode Commands
- IPSG RADIUS Snoop Configuration Mode Commands
- IPSG RADIUS Server Configuration Mode Commands
- IPSP Configuration Mode Commands
- IPv6 ACL Configuration Mode Commands
- IPv6 to IPv4 Tunnel Interface Configuration Mode Commands
- IP VRF Context Configuration Mode Commands
- ISAKMP Configuration Mode Commands
- IuPS Service Configuration Mode Commands
- LAC Service Configuration Mode Commands
- Line Configuration Mode Commands
- Link Configuration Mode Commands
- Linkset Configuration Mode Commands
- LMA Service Configuration Mode Commands
- LNS Service Configuration Mode Commands
- Local Policy Actiondef Configuration Mode Commands
- Local Policy Eventbase Configuration Mode Commands
- Local Policy Ruledef Configuration Mode Commands
- Local Policy Service Configuration Mode Commands
- Location Service Configuration Mode Commands
- Logical eNode Configuration Mode Commands
- Loopback Interface Configuration Mode Commands
- LTE Custom TAI List Configuration Mode Commands
- LTE Emergency Profile Configuration Mode Commands
- LTE Forbidden Location Area Configuration Mode Commands
- LTE Forbidden Tracking Area Configuration Mode Commands
- LTE Foreign PLMN GUTI Management Database Configuration Mode Commands
- LTE HeNBGW MME Pool Configuration Mode Commands
- LTE Handover Restriction List Configuration Mode Commands
- LTE MME HeNB-GW Management Database Configuration Mode Commands
- LTE Network Global MME ID Management Database Configuration Mode Commands
- LTE Paging Map Configuration Mode Commands
- LTE Paging Profile Configuration Mode Commands
- LTE Peer Map Configuration Mode Commands
- LTE Policy Configuration Mode Commands
- LTE Subscriber Map Configuration Mode Commands
- LTE TAI Management Database Configuration Mode Commands
- LTE TAI Management Object Configuration Mode Commands
- MAG Service Configuration Mode Commands
- MAP Service Configuration Mode Commands
- MIP HA Assignment Table Configuration Mode Commands
- MPLS-LDP Configuration Mode Commands
- MIPv6 HA Service Configuration Mode Commands
- MME-eMBMS Service Configuration Mode Commands
- MME LAC Pool Area Configuration Mode Commands
- MME MSC Pool Area Configuration Mode
- MME SGs Service Configuration Mode Commands
- MME Service Configuration Mode Commands
- MPLS-IP Configuration Mode Commands
- MRME Service Configuration Mode Commands
- Network Service Entity- IP Local Configuration Mode Commands
- Network Service Entity - Peer NSEI Configuration Mode Commands
- Network Service Virtual Connection Configuration Mode Commands
- Network Service Virtual Link Configuration Mode Commands
- NTP Configuration Mode Commands
- NTSR Pool Configuration Mode Commands
- Operator Policy Configuration Mode
- ORBEM Configuration Mode Commands
- OSPF Configuration Mode Commands
- OSPFv3 Configuration Mode Commands
- OSPF VRF Configuration Mode Commands
- Out-Address Configuration Mode Commands
- P2P Advertisement Server Group Configuration Mode Commands
- PCC-Action-Set Configuration Mode Commands
- PCC-AF-Service Configuration Mode Commands
- PCC-Condition-Group Configuration Mode Commands
- PCC-Data-Service Configuration Mode Commands
- PCC-Event-Notification-Interface-Endpoint Configuration Mode Commands
- PCC-Policy-Service Configuration Mode Commands
- PCC-Service-Profile Configuration Mode Commands
- PCC-QoS-Profile Configuration Mode Commands
- PCC-Quota Service Configuration Mode Commands
- PCC-Sp-Endpoint Configuration Mode Commands
- PCC-Service Addon Configuration Mode Commands
- PCC-TimeDef Configuration Mode Commands
- PCP Configuration Mode Commands
- PCP Policy Control Configuration Mode Commands
- PDIF Service Configuration Mode Commands
- PDG Service Configuration Mode Commands
- PDSN Service Configuration Mode Commands
- PDSN Service RoHC Configuration Mode Commands
- Peer List Configuration Mode Commands
- Peer Profile Configuration Mode Commands
- Peer-Server Configuration Mode Commands
- P-GW Service Configuration Mode Commands
- Policy Control Configuration Mode Commands
- Plugin Configuration Mode Commands
- PVC Configuration Mode Commands
- PVC Interface Configuration Mode Commands
- QCI - QoS Mapping Configuration Mode Commands
- QCI - RAN ID Mapping Configuration Mode Commands
- QoS L2 Mapping Configuration Mode Commands
- QoS Profile Configuration Mode Commands
- Index
PCC-Service Addon
Configuration Mode Commands
The PCC-Service Configuration Mode is used to link, consolidate and manage the policy logic for the network. It defines the authorization of resources for a subscriber's data usage under various conditions and policies in the PCC-service.
The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).
associate-addon-state
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration
configure > context context_name > pcc-service service_name> addon addon_name
Syntax
Syntax Description
associate-addon-state {expired | grace | not-started | started} {action-set act_set_name [notification-template not_temp_name] | notification-template not_temp_name} no associate-addon-state {expired | grace | not-started | started}
no
Removes the configured associated addon state from this PCC service addon instance for IPCF configuration.
expired
grace
not-started
started
action-set act_set_name
The act_set_name must be an alphanumerical string from 1 through 63 characters.
notification-template not_temp_name
Usage Guidelines
Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.
[context_name]hostname(config-pcc-action-set)
For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.
Examples
action-set pcc_act1
no action-set pcc_act1
description
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration
configure > context context_name > pcc-service service_name> addon addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm] no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or modified through this command.
The act_set_name must be an alphanumerical string from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.
[context_name]hostname(config-pcc-action-set)
For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.
Examples
action-set pcc_act1
no action-set pcc_act1
duration
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration
configure > context context_name > pcc-service service_name> addon addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm] no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or modified through this command.
The act_set_name must be an alphanumerical string from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.
[context_name]hostname(config-pcc-action-set)
For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.
Examples
action-set pcc_act1
no action-set pcc_act1
end
Exits the current configuration mode and returns to the Exec mode.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Syntax Description
end
Usage Guidelines
Use this command to return to the Exec mode.
exit
Exits the current mode and returns to the parent configuration mode.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Syntax Description
exit
Usage Guidelines
Use this command to return to the parent configuration mode.
status active
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration
configure > context context_name > pcc-service service_name> addon addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm] no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or modified through this command.
The act_set_name must be an alphanumerical string from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.
[context_name]hostname(config-pcc-action-set)
For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.
Examples
action-set pcc_act1
no action-set pcc_act1
time-allowance
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration
configure > context context_name > pcc-service service_name> addon addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm] no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or modified through this command.
The act_set_name must be an alphanumerical string from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.
[context_name]hostname(config-pcc-action-set)
For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.
Examples
action-set pcc_act1
no action-set pcc_act1
volume-allowance
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration
configure > context context_name > pcc-service service_name> addon addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm] no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or modified through this command.
The act_set_name must be an alphanumerical string from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.
[context_name]hostname(config-pcc-action-set)
For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.
Examples
action-set pcc_act1
no action-set pcc_act1
Feedback