LTE Peer Map Configuration Mode Commands

The LTE Peer Map Configuration Mode enables the operator to map LTE Policy to a peer profile based on matching criteria and precedence for the criteria.

Mode

Exec > Global Configuration > LTE Policy Configuration > LTE Peer Map Configuration

configure > lte-policy > peer-map map_name

Entering the above command sequence results in the following prompt:

[local]host_name(peer-map)#
Important:

Available commands or keywords/variables vary based on platform type, product version, and installed license(s).

end

Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

Syntax Description

end

Usage Guidelines

Use this command to return to the Exec mode.

exit

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

Syntax Description

exit

Usage Guidelines

Use this command to return to the parent configuration mode.

precedence

Configures the matching criteria and precedence for mapping an LTE Policy with a peer profile.

Product

P-GW

SAEGW

S-GW

Privilege

Administrator

Mode

Exec > Global Configuration > LTE Policy Configuration > LTE Peer Map Configuration

configure > lte-policy > peer-map map_name

Entering the above command sequence results in the following prompt: 

[local]host_name(peer-map)#

Syntax

Syntax Description

precedence priority match-criteria { all peer-profile-name profile_name | peer-ip-address { ip_address | ip_address/mask } [ serving-plmnid mcc mcc mnc mnc ] peer-profile-name profile_name | serving-plmnid mcc mcc mnc mnc [ peer-ip-address { ip_address | ip_address/mask } ] peer-profile-name profile_name }
no precedence priority

no

Removes the selected precedence priority number from the peer map.

priority must be an integer from 1 to 1024.

priority

priority must be an integer from 1 to 1024. Precedence 1 has highest priority.

match-criteria

Defines the criteria to be used to match peer nodes.

all

Specifies that all peer nodes are to be associated with the peer map.

To map a peer to a profile when there is no specific criteria required, use the all keyword.

peer-profile-name profile_name

Sets the peer profile with which the matching criteria is associated.

profile_name must be an existing peer profile expressed as an alphanumeric string of 1 through 64 characters.

peer-ip-address ip_address | ip_address/mask

Specifies the IP address of the peer node.

ip_address must be specified using the standard IPv4 dotted decimal notation or colon notation for IPv6.

ip_address/mask must be specified using the standard IPv4 dotted decimal notation or colon notation for IPv6, followed by the mask.

serving-plmnid mcc mcc mnc mnc

Specifies serving nodes with criteria matching the PLMN ID (MCC and MNC) are to be associated with a specified peer map.

mcc mcc: Specifies the mobile country code (MCC) portion of the PLMN ID.

mcc must be a three-digit number between 100 and 999.

mnc mnc: Specifies the mobile network code (MNC) portion of the PLMN ID.

mnc must be a two- or three-digit number between 00 and 999.

Usage Guidelines

Use this command to map LTE Policy to a peer profile based on matching criteria and precedence for the criteria.

A maximum of 1024 precedence entries can be configured.

Examples

The following command associates the peer profile named pp5 with peers associated with a serving node PLMN ID MCC of 111 and an MNC of 222: 
precedence 100 match-criteria serving-plmnid mcc 111 mnc 222 peer-profile-name pp5