Configuring Domain Name Settings
Perform the following tasks from the System Domain Name Settings page:
Note After changing the domain name, you must reload the Cisco Unity Express software.
Changing a DNS Server
Use this procedure to change one or both of the DNS servers if their names or IP addresses have changed since running the Initialization Wizard.
Before You Begin
Gather the following information:
-
The hostname of Cisco Unity Express.
-
The domain name and IP address of the DNS server.
Procedure
Step 1 Choose
System
>
Domain Name Settings
.
The system displays the Domain Name Settings page.
Step 2 Enter a hostname or the name of the server that stores the Cisco Unity Express application files.
Step 3 Enter the hostname of Cisco Unity Express.
Step 4 Click
Apply
.
Adding a DNS Server
Enter additional DNS servers as alternate server destinations, to be used if the system cannot access the primary domain name server.
Restriction
You can have a maximum of four DNS servers.
Procedure
Step 1 Choose
System
>
Domain Name Settings
.
The system displays the Domain Name Settings page.
Step 2 Click
Add
under Domain Name Service (DNS) Servers.
The system displays the Add a DNS server page.
Step 3 Enter the IP address of the server.
Step 4 Click
Add
.
Deleting a DNS Server
Use this procedure to delete a DNS server.
Procedure
Step 1 Choose
System
>
Domain Name Settings
.
The system displays the Domain Name Settings page.
Step 2 Check the checkbox next to the DNS server that you want to delete.
Step 3 Click
Delete
.
Step 4 At the prompt, click
OK
.