Configuring Call-In Numbers
Perform the following tasks from the System Call-in Number window:
Viewing a List of Call-in Numbers
Use this procedure to view a list of the numbers that callers dial to reach system applications, such as voice mail, the auto attendant, and the Administration via Telephone (AvT) system.
Step 1 Choose
System
>
Call-in Numbers
.
Step 2 The window shows the configured call-in numbers with the fields shown below:
You can also use wildcard trigger patterns when configuring call-in numbers (see Using Wildcard Trigger Patterns).
-
Application—Application reached when the call-in number is dialed. Valid values are any custom applications you have created, and the system defaults:
– voicemail—Default voice-mail application.
– autoattendant—Default auto attendant application.
– promptmgmt—Default Administration via Telephone (AvT) application
Displaying or Modifying Call-in Numbers
Use this procedure to display or modify the numbers that callers dial to reach system applications, such as voice mail, the auto attendant, and the Administration via Telephone (AvT) system.
Step 1 Choose System > Call-in Numbers.
Step 2 Click the call-in number that you want to modify or view. The Call-in Number Profile window displays the following fields:
Step 3 To modify, edit the following fields:
You can also use wildcard trigger patterns when configuring call-in numbers (see Using Wildcard Trigger Patterns).
-
Application—Application reached when the call-in number is dialed. Valid values are any custom applications you have created, and the system defaults:
– voicemail—Default voice-mail application.
– autoattendant—Default auto attendant application.
– promptmgmt—Default Administration via Telephone (AvT) application
Step 4
Click Apply
.
Step 5 Click
Ok
to save.
Adding a Call-in Number
Use this procedure to add a call-in number, or a number that callers dial to reach system applications. These applications include voice mail, the auto attendant, and the Administration via Telephone (AvT) system.
Step 1 Choose System > Call-in Numbers.
Step 2 Click Add.
Step 3 Enter the data in the following fields:
-
Application—Application reached when the call-in number is dialed. Valid values are any custom applications you have created, and the system defaults:
– voicemail—Default voice mail application.
– autoattendant—Default auto attendant application.
– promptmgmt—Default Administration via Telephone (AvT) application.
You can also use wildcard trigger patterns when configuring call-in numbers (see Using Wildcard Trigger Patterns).
Step 4 Click
Add
.
Step 5 Click
Ok
to save.
Using Wildcard Trigger Patterns
You can configure a trigger to specify a number
pattern
instead of a single number. Incoming calls targeted to a number that matches the pattern cause the associated script to be invoked. The script determines which number was dialed by inspecting the called number attribute associated with the call. Cisco Unity Express supports a limit of 32 characters in the trigger pattern.
Wildcard patterns are based on Cisco Unified Communications Manager route patterns. The rules for choosing between multiple wildcard patterns matching an incoming call are similar to those used by Cisco Unified Communications Manager. For each pattern that is a candidate match for the dial string, Cisco Unity Express calculates the number of other dial strings of the same length as the input dial string that would match each pattern, and then selects the pattern that has the fewest alternative dial string matches.
Table 4
shows the trigger pattern wildcards and special characters supported in Cisco Unity Express.
Table 4 Trigger Pattern Wildcards and Special Characters
|
|
|
X
|
The X wildcard matches any single digit in the range 0 through 9.
|
The trigger pattern 9XXX matches all numbers in the range 9000 through 9999.
|
!
|
The exclamation point (!) wildcard matches one or more digits in the range 0 through 9.
|
The trigger pattern 91! matches all numbers in the range 910 through 91999999999999999999999999999999.
|
?
|
The question mark (?) wildcard matches zero or more occurrences of the preceding digit or wildcard value.
|
The trigger pattern 91X? matches all numbers in the range 91 through 91999999999999999999999999999999.
|
+
|
The plus sign (+) wildcard matches one or more occurrences of the preceding digit or wildcard value.
|
The trigger pattern 91X+ matches all numbers in the range 910 through 91999999999999999999999999999999.
|
[ ]
|
The square bracket ([ ]) characters enclose a range of values.
|
The trigger pattern 813510[012345] matches all numbers in the range 8135100 through 8135105.
|
-
|
The hyphen (-) character, used with the square brackets, denotes a range of values.
|
The trigger pattern 813510[0-5] matches all numbers in the range 8135100 through 8135105.
|
^
|
The circumflex (^) character, used with the square brackets, negates a range of values. Ensure that it is the first character following the opening bracket ([).
Each trigger pattern can have only one ^ character.
|
The trigger pattern 813510[^0-5] matches all numbers in the range 8135106 through 8135109.
|