Configuring Users for Cisco Unified Communications Manager Express (CUCME)
Perform the following tasks in the
Configure User
window:
Viewing a List of Users
Use this procedure to view a list of users in the system.
Step 1 Choose Configure > Users. The Users window appears and contains the following fields:
-
User ID—By default, the system displays users in alphabetical order by user ID. To sort from A to Z, click User ID.
-
Display Name—To display the list of users in order by display name, click Display Name.
-
Primary Extension—To display the list of users in order by primary extension, click Primary Extension.
-
Use the dialog box to change the number of rows displayed per window.
Adding a New User
Use this procedure to add a new user to the system.
Step 1 Choose Configure > Users. The Configure Users window appears.
Step 2 Click Add. The Add a New User window appears.
Step 3 Enter information into the following fields:
This field only appears if multiple Cisco Unified CME sites are configured.
Step 4 To save the information, click Add.
Note If you click to add a new mailbox, the Add a New Mailbox window will appear after you click Add to add the new user. See Adding a New Mailbox to set the parameters.
Note If you selected a random password or PIN, a message appears with the new password or PIN. Write these values in a secure place to give to the user. They are also displayed on the user profile page (see Displaying or Modifying a User Profile).
Selecting a Phone for a User
To select a phone for a user, use this procedure.
Step 1 Choose Configure > Users. The Configure Users window appears.
Step 2 In the User ID field, click on the user for whom you want to select a phone. The User Profile window appears.
Step 3 In the Associated Phone field, click Add/Edit. The Select Phone window appears and shows the sequence number, hardware address, and extensions of all unassociated phones. These phones are available to assign to users.
Step 4 Click the button next to the phone that you want to assign to the user and click Select Phone. You are returned to the User Profile window.
Note A user may only be assigned one phone.
Selecting an Extension for a User
To select an extension for a user, use this procedure.
Step 1 Choose Configure > Users. The Configure Users window appears.
Step 2 Click Add. The Add a New User window appears.
Step 3 In the Primary Extension field, do one of the following:
a. Click Other then type in the extension in the field.
b. Click Other then click on the magnifying glass icon. The Select Extension window appears and shows all unassociated extensions. These extensions are available to assign to users.
Step 4 Click the button next to the extension that you want to assign to the user and click Select Extension. You are returned to the User Profile window.
Step 5 Click Apply to save the extension selection for that user.
Note A user may only be assigned one extension.
Displaying or Modifying a User Profile
Use this procedure to display or modify a user profile.
Step 1 To view a user's profile, click Configure > Users. The Configure Users window appears.
Step 2 If you do not see the user, click Find to search for the user (See Finding a User). You can also select All in the Rows Per Page field.
Step 3 Click the user ID of the person whose profile you want to see. The User Profile window appears with the following fields shown:
Step 4 Click to modify this user profile.
Additional User Profile Options
You can also click the following tabs in the Configure Users window:
– Device type
– Destination
– Click to enable the device type.
Displaying or Modifying Group Subscriptions
Use this procedure to modify the groups to which a user is assigned.
Step 1 Choose Configure > Users. The Configure Users window appears.
Step 2 Click the name of the user whose group subscription you want to view or modify. The User Profile window appears.
Step 3 Click the Groups tab. The following fields are displayed:
-
Group ID
-
Rights—member or owner
-
Description
-
Primary extension—primary extension of the general-delivery mailbox assigned to the group.
Step 4 To subscribe the user as the owner of another group, click Subscribe as owner. To subscribe the user as a member of another group, click Subscribe as member. The Find window appears.
Step 5 Enter the group ID, description, or extension number and click Search.
Step 6 Click the box next to the group that this user should join and click Select Rows.
Step 7 (Optional) To unsubscribe the user from a group, click the box next to the Group Name and click Unsubscribe.
See Configuring Groups for more information.
Finding a User
Use this procedure to search for a user.
Step 1 Choose Configure > Users. The Configure Users window appears.
Step 2 Click Find. The following fields appear:
Note All fields are optional.
Step 3 Enter the search criteria in one or more fields and click Find. The User Configuration window displays the results of your search.
Deleting a User
To delete a user from Cisco Unity Express, use this procedure. Deleting a user in the Cisco Unity Express GUI also deletes the user's mailbox. Deleting a user in the command-line interface leaves the user's mailbox orphaned.
Step 1 Choose Configure > Users. The Configure Users window appears.
Step 2 Click the box next to the user ID that you want to delete.
Step 3 Click Delete.
Step 4 Click Ok to confirm the deletion.