Configuring Fax Settings
Note The Cisco IOS gateways must be configured to handle fax calls.
Use this procedure to configure your fax settings.
Step 1 Choose
System
>
Fax Settings
. The System Fax Settings window appears.
Step 2 Enter the hostname for the outgoing Cisco IOS fax gateway. Fax printing is allowed only when the outgoing gateway is input.
Step 3 Enter a “From” e-mail address to use as the default. Use the format localhost@localdomain.com.
Step 4 Select the fax number restriction table from the drop-down list.
Note If no restriction tables are configured in the drop-down list, see Configuring Restriction Tables.
Step 5 Enter the fax printing number. Enter numbers without spaces, dashes, or parenthesis.
Note If multiple Sites (multiple Cisco Unified CMEs) are configured, a table will be present with a list of configured sites and their fax numbers that you can configure and modify.
Step 6 Enter the hostname for the incoming Cisco IOS fax gateway and click Add. Up to ten faxes/Cisco IOS gateways can be added.
Note If you omit the incoming gateway input, the receiving fax is automatically disabled on the system.
Step 7 Click
Apply
to save your settings.