Configure Domain Name Settings

Perform the following tasks from the System Domain Name Settings page:


Note
After changing the domain name, you must reload the Cisco Unity Express software.

Change a DNS Server

Use this procedure to change one or both of the DNS servers if their names or IP addresses have changed since running the InitializationSetup Wizard.

Before you begin

Gather the following information:

  • The hostname of Cisco Unity Expressthe Cisco Unified SIP Proxy system.

  • The domain name and IP address of the DNS server.

Procedure

Step 1

Choose System > Domain Name Settings.

The system displays the Domain Name Settings page.
Step 2

Change theEnter a hostname or domainthe name of the server that stores the Cisco Unity Express application files.
Step 3

Enter the hostname of Cisco Unity Express.
Step 4

Enter the domain name of the server. Click Apply.

Add a DNS Server

Enter additional DNS servers as alternate server destinations, to be used if the system cannot access the primary domain name server.

Restriction

You can have a maximum of four DNS servers.

Procedure

Step 1

Choose System > Domain Name Settings.

The system displays the Domain Name Settings page.
Step 2

Click Add under Domain Name Service (DNS) Servers.

The system displays the Add a DNS server page.
Step 3

Enter the IP address of the server.
Step 4

Click Add.

Remove a DNS Server

Use this procedure to delete a DNS server.

Procedure

Procedure

Step 1

Choose System > Domain Name Settings.

The system displays the Domain Name Settings page.
Step 2

Check the checkbox next to the DNS server that you want to delete.
Step 3

Click Delete.

Step 4

At the prompt, click OK.

What To Do Next Save and then reload the configuration. SeeUsing the Administration Control PanelSaving the Cisco Unified Messaging Gateway Configuration and Reloading the Cisco Unified Messaging Gateway Configuration. Related Topics Back to the Configure Domain Name Settings menu page