Configure Fax Settings


Note
The Cisco IOS gateways must be configured to handle fax calls.

Use this procedure to configure your fax settings.

Procedure

Step 1

Choose System > Fax Settings. The System Fax Settings window appears.

Step 2

Enter the hostname for the outgoing Cisco IOS fax gateway. Fax printing is allowed only when the outgoing gateway is input.
Step 3

Enter a “From” e-mail address to use as the default. Use the format localhost@localdomain.com.
Step 4

Select the fax number restriction table from the drop-down list.

Note 
If no restriction tables are configured in the drop-down list, see Configure Restriction Tables.
Step 5

Enter the fax printing number. Enter numbers without spaces, dashes, or parenthesis.

Note 
If multiple Sites (multiple Cisco Unified CMEs) are configured, a table will be present with a list of configured sites and their fax numbers that you can configure and modify.
Step 6

Enter the hostname for the incoming Cisco IOS fax gateway and click Add. Up to ten faxes/Cisco IOS gateways can be added.

Note 
If you omit the incoming gateway input, the receiving fax is automatically disabled on the system.
Step 7

Click Apply to save your settings.