New and Changed Information

New and Changed Information for Firmware Release 14.3(1)SR3

The following information is new or changed for Firmware Release 14.3(1)SR3.

Feature

New or Changed

Added the new parameter "TLS Client Min Version".

Updated the default value of the parameter "Disable TLS 1.0 and TLS 1.1 for Web Access" from "Disabled" to "Enabled".

Product Specific Configuration

New and Changed Information for Firmware Release 14.2(1)

The following information is new or changed for Firmware Release 14.2(1).

Feature

New or Changed

Support for SIP OAuth on SRST

Security Enhancements for Your Phone Network

New settings for Cisco Headset 500 Series: Dock Event and Always On Mode

Telephone Features

New and Changed Information for Firmware Release 14.0(1)

Table 1. New and Changed Information

Feature

New or Changed

User Interface Enhancements

Surviveable Remote Site Telephony

Telephone Features

SIP OAuth Enhancements

Security Enhancements for Your Phone Network

OAuth Enhancements for MRA

Mobile and Remote Access Through Expressway

As of Firmware Release 14.0, the phones support DTLS 1.2. DTLS 1.2 requires Cisco Adaptive Security Appliance (ASA) Release 9.10 or later. You configure the minimum DTLS version for a VPN connection in ASA. For more information, see ASDM Book 3: Cisco ASA Series VPN ASDM Configuration Guide at https://www.cisco.com/c/en/us/support/security/asa-5500-series-next-generation-firewalls/products-installation-and-configuration-guides-list.html

New and Changed Information for Firmware Release 12.6(1)

No administration guide updates were required for Firmware Release 12.6(1).

New Information for Firmware Release 12.5(1)SR3

All references into Cisco Unified Communications Manager documentation have been updated to support all Cisco Unified Communications Manager releases.

Table 3. Cisco IP Phone 7800 Administration Guide Revisions for Firmware Release 12.5(1)SR3

Revision

Updated Section

Support for Activation Code Onboarding and Mobile and Remote Access

Activation Code Onboarding and Mobile and Remote Access

Support for Problem Report Tool use from Cisco Unified Communications Manager.

Create a Phone Problem Report from Cisco Unified Communications Manager

New topic

Share a Network Connection with Your Phone and Computer

New Information for Firmware Release 12.5(1)SR2

No administration updates were required for Firmware Release 12.5(1)SR2.

Firmware Release 12.5(1)SR2 replaces Firmware Release 12.5(1) and Firmware 12.5(1)SR1. Firmware Release 12.5(1) and Firmware Release 12.5(1)SR1 have been deferred in favor of Firmware Release 12.5(1)SR2.

New Information for Firmware Release 12.5(1)SR1

All references into Cisco Unified Communications Manager documentation have been updated to support all Cisco Unified Communications Manager releases.

Table 4. Cisco IP Phone 7800 Administration Guide Revisions for Firmware Release 12.5(1)SR1

Revision

Updated Section

Support for Elliptic Curve support

Supported Security Features

Support for Media Paths and Interactive Connectivity Establishment

Media Paths and Interactive Connectivity Establishment

Support for Activation Code Onboarding

Activation Code Onboarding for On-premises Phones

Support for Remote Configuration of Headset Parameters

Headset Management on Older Versions of Cisco Unified Communications Manager

New Information for Firmware Release 12.5(1)

All references into Cisco Unified Communications Manager documentation have been updated to support all Cisco Unified Communications Manager releases.

Table 5. Cisco IP Phone 7800 Administration Guide Revisions for Firmware Release 12.5(1)

Revision

Updated Section

Support for Whisper Paging on Cisco Unified Communications Manager Express

Cisco Unified Communications Manager Express Interaction

Support for Disable TLS Ciphers

Product Specific Configuration

Support for Disable handset

Product Specific Configuration

New Information for Firmware Release 12.1(1)SR1

All references into Cisco Unified Communications Manager documentation have been updated to support all Cisco Unified Communications Manager releases.

Table 6. Cisco IP Phone 7800 Administration Guide Revisions for Firmware Release 12.1(1)SR1

Revision

Updated Section

Enbloc Dialing for Inter-Digit Timer T.302 Enhancement.

Product Specific Configuration

New Information for Firmware Release 12.1(1)

All references into Cisco Unified Communications Manager documentation have been updated to support all Cisco Unified Communications Manager releases.

Table 7. Cisco IP Phone 7800 Administration Guide Revisions for Firmware Release 12.1(1)

Revision

Updated Section

Enabling or disabling TLS 1.2 for web server access is now supported.

Product Specific Configuration

The G722.2 AMR-WB audio codec is now supported.

Cisco IP Phone Hardware Overview

Call Statistics Fields

New and Changed Information for Firmware Release 12.0(1)

No updates were required for firmware release 12.0(1).

New Information for Firmware Release 11.7(1)

No administration updates were required for firmware release 11.7(1).

New Information for Firmware Release 11.5(1)SR1

All new features have been added to Telephone Features.

All references into Cisco Unified Communications Manager documentation have been updated to support all Cisco Unified Communications Manager releases.

Table 8. Cisco IP Phone 7800 Administration Guide Revisions for Firmware Release 11.5(1)SR1

Revision

Updated Section

General

New presentation of phone feature configuration in Cisco Unified Communications Manager Phone Feature Configuration

Updated for Configurable Ringer support

Product Specific Configuration

Updated for Do not disturb with MLPP support

Set up AS-SIP

Enhanced Security

Security Enhancements for Your Phone Network

New Information for Firmware Release 11.5(1)

All new features have been added to Telephone Features.

All references into Cisco Unified Communications Manager documentation have been updated to support all Cisco Unified Communications Manager releases.

Table 9. Cisco IP Phone 7800 Administration Guide Revisions for Firmware Release 11.5(1).

Revision

Updated Section

Enhanced Security

Security Enhancements for Your Phone Network

Updated for Opus codec

Cisco IP Phone Hardware Overview

Updated for FIPS

Enable FIPS Mode

Status Messages Fields

Added Disable Recents softkey

Product Specific Configuration

Added Customize Dial Tone

Customize the Dial Tone

Added Display Network Info Screen

Display Network Information Screen

New Information for Firmware Release 11.0

All new features have been added to Telephone Features.

All references into Cisco Unified Communications Manager documentation have been updated to support all Cisco Unified Communications Manager releases.

Table 10. Cisco IP Phone 7800 Administration Guide Revisions for Firmware Release 11.0.

Revision

Updated Section

Updated these sections for improved cBarge support

Telephone Features

Feature Buttons and Softkeys

Updated these section for improved Problem Report Tool(PRT) support:

Problem Report Tool.

Configure a Customer Support Upload URL

Added for Line Text Label

Set the Label for a Line.