Contents

Assistant Deletions

This chapter provides information to delete assistants from the Cisco Unified Communications Manager database and LDAP Directory. You can use either a query search or a custom file to locate existing records to delete.

Assistant Deletions From Cisco Unified Communications Manager

When you delete Unified CM Assistant assistants from the Cisco Unified Communications Manager database and LDAP Directory, Cisco Unified Communications Manager maintains information on the assistant as a user in the directory. For example, Assistant thudson is assigned to two managers, hart and dstewart. You can disassociate thudson from both managers by deleting thudson as an assistant in the Cisco Unified Communications Manager database. The directory still shows thudson as a user.

You can use either a query search or a custom file to locate existing records to delete.

Delete Assistants Associations Using Query

You can delete assistants from their associations with managers from the Cisco Unified Communications Manager directory.

Procedure
    Step 1   Choose BAT Administration > Managers/Assistants > Delete Assistants > Query. The Delete Assistants Configuration window displays.
    Step 2   From the first Find Assistants where drop-down list box, choose one of the following criteria:
    • User ID
    • First Name
    • Middle Name
    • Last Name
    • Department

    From the second Find Assistants where drop-down list box, choose one of the following criteria:

    • begins with
    • contains
    • is exactly
    • ends with
    • is empty
    • is not empty
    Step 3   Specify the appropriate search text, if applicable, then click Find.
    Tip   

    To find all assistants that are registered in the database, click Find without entering any search text.

    1. To choose assistants from more than one department, enter multiple departments in this field. For example, to choose managers from departments 12 and 24, enter 12, 24 in the third box instead of performing two operations.
    2. To further define your query and to add multiple filters, check the Search Within Results check box, choose AND or OR from the drop-down box, and repeat Step 2 and Step 3.

    A list of discovered assistants displays by

    • User ID
    • First Name
    • Middle Name
    • Last Name
    • Department
    Step 4   In the Job Information area, enter the Job description.
    Step 5   Choose a delete method. Do one of the following:
    1. Click Run Immediately to delete assistants immediately.
    2. Click Run Later to delete assistants at a later time.
    Step 6   Click Submit to create a job for deleting the chosen assistants. Use the Job Configuration window to schedule and/or activate this job.
    Related References
    BAT Log Files
    Related Information
    Manage Scheduling Jobs

    Delete Assistant Associations Using Custom File

    You can delete assistants associations from the Cisco Unified Communications Manager database using a custom file that you create using a text-editor. Use the custom file to locate assistant associations that you want to delete.

    Attention:

    Do not use the insert or export transaction files that are created with bat.xlt for the delete transaction. Instead, you must create a custom file with details of the assistant association records that need to be deleted. Use only this file for the delete transaction.

    Before You Begin
    1. Create a custom text-based CSV data file that lists user IDs for assistants that you want to delete. Make sure you put each user ID on a separate line.

      Note

      The custom delete CSV data file does not need a header and you can enter values for assistants association IDs.

    2. Upload the custom file to the first node of Cisco Unified Communications Manager server.
    Procedure
      Step 1   Choose BAT Administration > Managers/Assistants > Delete Assistants > Custom File. The Delete Assistants Configuration window displays.
      Step 2   In Select Assistants where field, keep the identifier, User ID.
      Step 3   In the second field, in Custom File drop-down list box, choose the name of the custom file that you created for this transaction.
      Step 4   Click Find. The list of discovered assistants displays.
      Step 5   In the Job Information area, enter the Job description.
      Step 6   Choose a delete method. Do one of the following:
      1. Click Run Immediately to delete assistants immediately.
      2. Click Run Later to delete assistants at a later time.
      Step 7   Click Submit to create a job for deleting chosen assistants. Use the Job Configuration window to schedule and/or activate this job.
      Related Tasks
      Upload File to Server
      Related References
      BAT Log Files
      Related Information
      Manage Scheduling Jobs
      Assistant Deletions

      Assistant Deletions

      This chapter provides information to delete assistants from the Cisco Unified Communications Manager database and LDAP Directory. You can use either a query search or a custom file to locate existing records to delete.

      Assistant Deletions From Cisco Unified Communications Manager

      When you delete Unified CM Assistant assistants from the Cisco Unified Communications Manager database and LDAP Directory, Cisco Unified Communications Manager maintains information on the assistant as a user in the directory. For example, Assistant thudson is assigned to two managers, hart and dstewart. You can disassociate thudson from both managers by deleting thudson as an assistant in the Cisco Unified Communications Manager database. The directory still shows thudson as a user.

      You can use either a query search or a custom file to locate existing records to delete.

      Delete Assistants Associations Using Query

      You can delete assistants from their associations with managers from the Cisco Unified Communications Manager directory.

      Procedure
        Step 1   Choose BAT Administration > Managers/Assistants > Delete Assistants > Query. The Delete Assistants Configuration window displays.
        Step 2   From the first Find Assistants where drop-down list box, choose one of the following criteria:
        • User ID
        • First Name
        • Middle Name
        • Last Name
        • Department

        From the second Find Assistants where drop-down list box, choose one of the following criteria:

        • begins with
        • contains
        • is exactly
        • ends with
        • is empty
        • is not empty
        Step 3   Specify the appropriate search text, if applicable, then click Find.
        Tip   

        To find all assistants that are registered in the database, click Find without entering any search text.

        1. To choose assistants from more than one department, enter multiple departments in this field. For example, to choose managers from departments 12 and 24, enter 12, 24 in the third box instead of performing two operations.
        2. To further define your query and to add multiple filters, check the Search Within Results check box, choose AND or OR from the drop-down box, and repeat Step 2 and Step 3.

        A list of discovered assistants displays by

        • User ID
        • First Name
        • Middle Name
        • Last Name
        • Department
        Step 4   In the Job Information area, enter the Job description.
        Step 5   Choose a delete method. Do one of the following:
        1. Click Run Immediately to delete assistants immediately.
        2. Click Run Later to delete assistants at a later time.
        Step 6   Click Submit to create a job for deleting the chosen assistants. Use the Job Configuration window to schedule and/or activate this job.
        Related References
        Related Information

        Delete Assistant Associations Using Custom File

        You can delete assistants associations from the Cisco Unified Communications Manager database using a custom file that you create using a text-editor. Use the custom file to locate assistant associations that you want to delete.

        Attention:

        Do not use the insert or export transaction files that are created with bat.xlt for the delete transaction. Instead, you must create a custom file with details of the assistant association records that need to be deleted. Use only this file for the delete transaction.

        Before You Begin
        1. Create a custom text-based CSV data file that lists user IDs for assistants that you want to delete. Make sure you put each user ID on a separate line.

          Note

          The custom delete CSV data file does not need a header and you can enter values for assistants association IDs.

        2. Upload the custom file to the first node of Cisco Unified Communications Manager server.
        Procedure
          Step 1   Choose BAT Administration > Managers/Assistants > Delete Assistants > Custom File. The Delete Assistants Configuration window displays.
          Step 2   In Select Assistants where field, keep the identifier, User ID.
          Step 3   In the second field, in Custom File drop-down list box, choose the name of the custom file that you created for this transaction.
          Step 4   Click Find. The list of discovered assistants displays.
          Step 5   In the Job Information area, enter the Job description.
          Step 6   Choose a delete method. Do one of the following:
          1. Click Run Immediately to delete assistants immediately.
          2. Click Run Later to delete assistants at a later time.
          Step 7   Click Submit to create a job for deleting chosen assistants. Use the Job Configuration window to schedule and/or activate this job.
          Related Tasks
          Related References
          Related Information