The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Note The icon links on the ribbon bar of Microsoft Configuration Manager Console are product sensitive. It displays when a particular pack is installed. For example, you can see the Cisco IMC Configuration icon link when the Cisco IMC Integration Pack is successfully installed.
Step 1 Navigate to Start > All Programs > Microsoft System Center> Configuration Manager > Microsoft Configuration Manager Console to launch Configuration Manager Console.
The Configuration Manager Console screen displays.
Step 2 Select Assets and Compliance > Overview > Devices.
The installed servers are displayed in the content pane.
Step 3 Right-click Devices, select Cisco IMC Configuration > Import Cisco IMC Servers.
The Import Cisco IMC Servers Wizard displays which allows you to import Cisco IMC servers only in the Microsoft Configuration Manager Console.
Step 4 In the Enter Cisco IMC Address Input, you can import the servers by selecting one of the following options:
– IP Address combination — Specify multiple hyphen separated IP addresses for range, and multiple single IP Address. Use comma to separate all the IP addresses. For example, 10.105.219.15-10.105.219.129,10.104.200.35,10.104.100.133,10.106.233.136-10.106.233.200.
– IP Address range — Specify the range of Cisco IMC IP address in the Start and End fields.
– Select an IP Address CSV file — Click Browse, and navigate to the network path where the CSV file is located. The CSV file must contain IP addresses separated by a comma. For example, 10.106.233.167,10.106.233.165, 10.104.255.248, 10.104.255.242,10.104.255.228.
– Subnet mask — Specify the network address and subnet mask.
Step 5 In the CIMC connection parameters, enter a valid username and password for Cisco IMC.
In the CIMC Authentication Progress, the username and password is verified for the IP addresses provided.
Monitor the Status Message column.
The list of servers that can be imported are displayed in Select Servers.
Step 8 Check the servers you want to import. Or, you can check the Select All check box to import all the servers.
Step 10 Once teh server import is successful, a confirmation message appears.
Step 11 You can verify whether the servers are imported successfully in the Microsoft Configuration Manager Console using one of the following ways:
a. Navigate to Assets and Compliance > Overview > Devices.
The Device catalog is refreshed and the imported servers are shown in the content pane.
b. Navigate to Assets and Compliance > Overview > Devices Collections.
The Device Collections catalog is refreshed. The Cisco Collections groups are automatically created, and are shown in the Content Pane. The groups created are:
– All Cisco UCS <model> Servers, where <model> is the type of Cisco IMC servers. For example, C240, C260 and so on.
c. To view all the devices listed in each device collection group, right-click the device collection group and select Update Membership.
Note When you select Update Membership on All Cisco IMC Servers, and then on the Model Specific groups refresh process is fastened.
The device collection group refreshes and displays the devices which are part of the device collection group.
Step 12 To view the properties of each device, follow these steps:
a. Right-click the device in the Name column and select Properties.
The Device Properties page displays.
b. Click the Cisco IMC Information tab to view the properties of the selected device.
You create task sequences to support the deployment of operating systems. Add or edit the following task sequence steps to a task sequence while creating a custom task sequence or while editing an existing task sequence to help ease the deployment of operating systems:
Step 1 From the left pane of the Configuration Manager console, select Software Library > Overview > Operating Systems > Task Sequence catalog.
Step 2 Right-click on the Task Sequence catalog and select Create Task Sequence.
The Create Task Sequence Wizard displays.
Step 3 In the Create Task Sequence Wizard, select Create a new custom task sequence, and click Next.
Step 4 In the Specify task Sequence information, complete the following fields:
Step 6 In Summary, review the settings and click Next.
If you want to modify the settings, click Previous.
Step 7 Once the task sequence is created, click Close to exit the Create Task Sequence wizard.
You can view the task sequence in the Name column of the content pane.
Step 1 From the left pane of Microsoft Configuration Manager Console, select Software Library > Overview > Operating Systems > Task Sequences catalog.
The task sequences are listed in the content pane.
Step 2 Right-click the task sequence, and select Edit.
The Task Sequence Editor page displays.
Step 3 From the drop-down list, select Add > Disks > Format and Partition Disk.
The Format and Partition Disk item is flagged with the a red X check mark.
Step 4 On the Properties tab, complete the following fields:
To create a new partition, follow these steps:
a. In the Volume area, click the icon.
The Partition Properties page displays.
b. Enter a name for the partition and check the Make this the boot partition check box.
c. Check the Quick format check box.
The Format and Partition Disk task sequence is now flagged with a green check mark.
Step 6 From the drop-down list of the Task Sequence Editor, select Add> Images > Apply Operating System Image.
The Apply Operating System Image item is flagged with the a red X check mark.
Step 7 In the left pane of the Task Sequence Editor, click on Apply Operating System Image which is flagged with a red X check mark.
Step 8 On the Properties tab, complete the following fields:
If multiple images are associated with the specified Image package, use the drop-down list to specify the associated image to be used for this deployment.
Note See, Technet documentation for importing Operating System Images into Configuration Manager.
The Apply Operating System Image task sequence is now flagged with a green check mark.
Step 10 From the drop-down list of the Task Sequence Editor, select Add> Settings > Apply Network Settings.
The Apply Network Settings item is flagged with the a red X check mark.
Step 11 Click Apply Network Settings which is flagged with a red X check mark.
Step 12 On the Properties tab, complete the following fields:
The Apply Network Settings task sequence is now flagged with a green check mark.
Step 14 In the left pane of Task Sequence Editor, select Add> Settings > Apply Windows Settings.
The Apply Windows Settings item is flagged with the a red X check mark.
Step 15 In the left pane of the Task Sequence Editor, click on Apply Windows Settings which is flagged with a red X check mark.
Step 16 In the right pane of the Task Sequence Editor, under Properties, enter information for the following:
The Apply Windows Settings task sequence is now flagged with a green check mark.
Step 18 In the left pane of Task Sequence Editor, select Add> Drivers > Apply Driver Package.
The Apply Driver Package item is flagged with the a red X check mark.
Step 19 In the left pane of the Task Sequence Editor, click on Apply Driver Package which is flagged with a red X check mark.
Step 20 In the right pane of the Task Sequence Editor, under Properties, click Browse next to the Driver Package box and select the driver package that was created using the Create UCS C-Series Driver Package Wizard.
The Apply Driver Package task sequence is now flagged with a green check mark.
Note The package contains all the drivers to be made available during operating system deployment.
Step 22 In the left pane of Task Sequence Editor, select Add> Images > Setup Windows and ConfigMgr.
The Setup Windows and ConfigMgr item is flagged with the a red X check mark.
Step 23 In the left pane of the Task Sequence Editor, click on Setup Windows and ConfigMgr which is flagged with a red X check mark.
Step 24 In the right pane of the Task Sequence Editor, under Properties, click Browse next to the Package box.
The Select the Deployment Package page displays.
Step 25 In the Select the Deployment Package page, under Deployment packages, select the required deployment package.
Note Refer to Microsoft Technet documentation on details for Creating a Deployment Package.
The Setup Windows and ConfigMgr task sequence is now flagged with a green check mark.
Cisco IMC Configuration Profile Manager helps user in creating various configuration profiles such as BIOS, RAID, Firmware Update, Cisco IMC Admin, VIC Adapter. You can launch the Profile Manager by selecting a valid Cisco IMC server discovered in the Configuration Manager. You can either create a profile newly from scratch or get the settings from the system and use it. Creation of profile from a reference system is supported only for BIOS, IMC Admin and VIC Adapter configuration profiles.
Step 1 Launch the Cisco IMC Configuration Profile Manager Utility. The Cisco IMC Configuration Profiles Manager window displays.
Step 2 Click the icon to launch the new profile dialog box .
The Create new profile dialog box displays.
Step 3 From the Profile Type drop-down list, select RAID.
A default embedded controller is created.
Step 5 Enter the configuration rule name in the Configuration rule name field.
Step 6 Select the Error handling rule from the drop-down menu. You can choose from:
a. Add new controllers and define rules for them, or edit the default controller and define the rules. For more information, see Controllers.
b. Add or edit variable conditions for the default controller or the controller that you add. For more information, see Variable Conditions.
c. Create new arrays from a variable condition, if required. For more information, see Arrays.
Step 8 Click Save to save the RAID profile.
The Array Builder allows you to define arrays and disk sets with all available RAID settings, logical drives or virtual disks of varying sizes or use all available space, and assign hot spares to individual arrays or assign global hot spares to the controller.
When you run the task sequence on a target server, the array configuration utility detects the existing controllers in the system as well as the disks attached to each controller. The custom action then tries to match the physical configurations it detected to the logical configurations you defined in the configuration rules. These array configuration rules are defined using a graphical, logical layout that helps you visualize how your array controllers are configured. Rules are processed in the order displayed in the tree, so you know exactly which rules have priority.
You can define rules to match configurations based on the following:
Note You can define different configuration to different servers even if the detected hardware is identical by applying configuration rules based on the RAID profiles detected on the server.
When a controller is created, a default variable condition, array and disk(s) are created to ensure a valid configuration. You can choose to leave the controller un-configured with disks set to non-RAID, or you can add arrays or perform other actions.
Controller elements contain variable condition elements. Controllers can be one of several configuration types:
Step 1 Select a controller from the list, or select an embedded controller. The Controllers drop-down menu is enabled.
Step 2 Click Controllers > New Controller. The Controller Configuration window displays.
Step 3 Under Controller Selection Criteria, select from the following options:
Step 4 Under Variable Matching Criteria, you can set a rule to apply this configuration only if it matches certain criteria that you select. Select Apply this configuration only when the variable to enable the rule matches certain criteria that you select.
Select the controller and click Controllers > Edit Controller. The Controller Configuration window displays where you can make changes to the controller.
Step 1 Select the controller and click Controllers > Delete Controller. A warning informing that all the attached arrays and disks will be deleted displays.
Step 2 Click Yes to delete or No to cancel.
Note At least one controller is required on the server. If there is only one controller and you delete it, a message that the default controller was inserted because the last controller was deleted displays.
To provide the ability to use the same RAID configuration in multiple logical configurations, variable evaluation is provided so that a different configuration for arrays and logical drives can be applied to different situations. To provide the ability to use the same hardware configuration in multiple logical configurations, variable evaluation is provided so that a different configuration for arrays and logical drives can be applied to different situations. Variable condition elements contain arrays and global hot spares, and are of two types:
Step 1 Under an embedded controller, expand Embedded Controller, and choose [No variable conditions defined].
Step 2 Click Variables > New Variable Condition. The Variable Condition Configuration window displays.
Step 3 Under Variable Matching Criteria, you can set a rule to apply this variable only if it matches certain criteria that you select.
Step 4 Click OK to apply the variable condition, or Cancel to return to the Array Builder.
Note If you define a variable condition, then the same condition has to be defined on the particular server to enable and apply the variable condition. This can be done by right-clicking the server and defining the variable from the variables tab.
Step 1 Select the variable condition and click Variables > Edit Variable Condition. The Variable Condition Configuration window displays, where you can make changes to your variable condition.
Step 2 Click OK to apply the variable condition, or Cancel to return to Array Builder.
Step 1 Select the variable condition and click Variables > Delete Variable Condition. A message that all the attached arrays and disks will be deleted displays.
Step 2 Click Yes to delete or No to cancel.
Array nodes include both RAID arrays and non-RAID disk groups that are indicated by the different icons. By default, a non-RAID disk group is created when a controller is created. If the controller configuration specifies the number of disks required, the same number of disks is added to the non-RAID group.
Arrays can be added, modified, or deleted depending on the controller configuration and number of disks available. Array elements contain logical drives and physical disks.
Step 1 Under a variable condition, select a variable condition and click Arrays > New Array. The Array Settings window displays.
Step 2 Set the required RAID level from the Desired RAID Level drop-down list.
Step 3 To set the Boot Drive check the given check-box.
Step 4 Click OK to apply the array, or Cancel to return to Array Builder.
Step 1 Select the array and click Arrays > Edit Array. The Array Settings window displays. You can edit the array by selecting a different RAID level for the array.
Step 2 Click OK to apply the changes, or Cancel to return to Array Builder.
Step 1 Select the array and click Arrays > Delete Array. A message that all the attached disks will be deleted displays.
Step 2 Click Yes to delete or No to cancel.
You can perform firmware update on single systems or group of systems by creating a firmware update profile. Host Upgrade Utility (HUU) is used to perform firmware update on the system. You have an option to download the HUU image from either cisco.com from the utility or if you have already downloaded the HUU you can provide the same details as part of firmware update profile.
Step 1 Launch the Cisco IMC Configuration Profile Manager Utility. The Cisco IMC Configuration Profile Manager window displays.
Step 2 Click the icon to create a new firmware update profile.
The Create new profile dialog box displays.
Step 3 From the Profile Type drop-down list, select Firmware Update.
The Select Host Update Utility screen displays.
Step 5 Under Select Host Update Utility, create a firmware update profile by selecting one of the following radio buttons:
a. Specify HUU source — Select Download HUU from Cisco.com radio button if you want to download the ISO from Cisco.com
Note For M4 servers, download the HUU manually from Cisco.com and then go to option b.
The Download Details screen displays.
– Under Select a platform, select the server.
– Under the Credentials for Cisco.com, enter your Cisco.com username and password in the respective fields.
Note Provide the proxy server details only if you have a proxy connection setup to access the server.
– Under the Proxy Server, select Enable Proxy Configuration and Enable Proxy Authentication.
– Enter the proxy configuration details and the proxy authentication details in the respective sections.
If the credentials are valid the UI will display all the available HUU versions for download. Select a HUU version from the drop down list.
– In the Path field, click Browse and navigate to the path where HUU must be downloaded to a network location and not local path.
– In the Username filed, enter the username of the share in the username@domainname format.
– In the Password filed, enter the password of the share.
If Download option is selected it will start the download process and displays the progress. After the download is complete click Customize option to update the firmware from the given list. Cisco recommends that you update all the firmware that are supported by the server. To update all the firmware, click Select All. Enter a name for the profile and click Save Profile option to save the profile.
Note You cannot update BIOS and Cisco IMC independently, and they must be on the same version.
b. Select HUU from local share — Select this radio button, if you have already downloaded the HUU and it is available in a share
Note It is recommended that you select All components for update.
Note Cisco IMC and BIOS cannot be update independently. They should always be on the same version.
You can use BIOS configuration profile to apply the BIOS settings to a single system or to a group of systems. You have the option to configure BIOS settings connected to Processor, Memory, Serial configuration, PCI and LOM settings, Server Management, Onboard Storage, USB configurations and Boot order related settings from the BIOS profile. As part of the Hardware Provisioning and OS Deployment Workflow, you can select the BIOS Profiles and the same settings are applied. Also you can apply BIOS configuration separately.
Step 1 Launch the Cisco IMC Configuration Profile Manager Utility. The Cisco IMC Configuration Profiles Manager window displays.
Step 2 Click the icon to create a new BIOS Profile.
Step 3 Create new profile dialog box displays. From the Profile Type drop-down list, select BIOS.
Step 4 You can create a new BIOS profile by choosing Create new profile or Create profile from the current configuration of the server option.
Note If you choose the Create profile from the current configuration of server option, the application retrieves the current settings from the server. This might take a while.
Step 6 In the Profile Name field, enter a name for the profile.
Step 7 In the IMC Server Configuration Profile Manager window, update the following areas:
To configure the boot order, follow these steps:
a. Select Legacy Boot Order or Precision Boot Order.
Note You can choose precision boot order only for C-Series servers with version 2.0(1) and above. You can also apply legacy boot order to the servers on versions 2.0(1) and above, however you cannot apply precision boot order to servers on any version prior to 2.0(1).
b. If you have chosen Legacy Boot Order, from the Device Order area, select the device that you want to configure.
c. If you have chosen Precision Boot Order, from the Add Boot Device area, click on a boot device from the list and populate the field in the add device pop-up window.
d. Click Add button. The device gets listed in the Configure Boot Order area.
e. Follow Step 1 and Step 2 to add other devices.
Note To remove the device from the list, select Remove button. Also, you can change the order of the devices by selecting Move Up or Move Down button. You also can modify the device details by clicking the Modify button.
Note To update these areas, see BIOS Parameters by Server Model for the C-Series servers, and E-Series documentation for the E-Series servers.
Step 8 Click Save Profile to save the profile in the database.
If you select Reset to Defaults, by default platform-default is set for all the parameters.
You can use Cisco IMC Admin profile to apply the Cisco IMC settings to a single system or to a group of systems. You have the option to configure Cisco IMC Admin settings like network, SNMP, local users, LDAP and communication settings. As part of the hardware provisioning and OS deployment workflow, you can select the Cisco IMC Admin profile and the same settings are applied. Also you can apply Cisco IMC Admin profile separately.
You can launch the Profile Manager by selecting a valid Cisco IMC discovered in the Configuration Manager.It is used to configure Cisco IMC Settings like Network Settings, Communication Services, SNMP Settings, adding Local Cisco IMC Users, LDAP Settings and Logging controls.
Step 1 Launch the Cisco IMC Configuration Profile Manager Utility. The Cisco IMC Configuration Profiles Manager window displays.
Step 2 Click the icon to create a new Cisco IMC Profile.
Step 3 The Create new profile dialog box displays.From the Profile Type drop-down list, select Cisco IMC Admin Configuration.
Step 4 You can create a new profile by using either Create a new profile or Create profile from current configuration of the server option. Choose the option through which you want to create a new Cisco IMC profile.
Step 6 In the Profile Name field, enter a name for the profile.
Step 7 In the Cisco IMC Server Configuration Profile Manager window, update the following areas:
Note To modify the properties of the following configuration settings, you must enable the parameter that you want to edit.
– Connecting to a Port Profile
– Configuring Network Security
For more information, see Configuring SNMP Properties
For more information, see Configuring Local User
Note When you create a profile by using Current configuration of the server option, passwords are not retrieved. If you want to successfully apply this profile settings on different server, you need to enter the password manually. This is applicable for Local Users, SNMP user with passwords.
For more information, see LDAP Servers
For more information, see Logging Controls
Step 8 Click Save Profile to save the profile in the database.
If you select Reset to Defaults, the parameters are set to the initial values.
You can use VIC Adapter profile to apply the Cisco VIC adapter settings to a single system or to a group of systems. You have the option to configure the VIC adapter settings such as creating vNICs, vHBAs, and VMFEX interfaces from the VIC configuration profile. You can define settings for the VIC adapter based on the PCI slot it is present or Any Slot. When you apply the profile the VIC Adapter Configuration task will inventory the system and based on that it performs a match based on the PCI slot. All the settings defined for that PCI slot is applied to the VIC adapter.
As part of the Hardware Provisioning and OS Deployment Workflow, you can select the VIC Adapter Configuration profile and the same settings are applied. Also you can apply VIC Adapter Configuration profile separately.
Step 1 Launch the Cisco IMC Configuration Profile Manager Utility. The Cisco IMC Configuration Profiles Manager window displays.
Step 2 Click the icon to create a new VIC Adapter Profile.
Step 3 The Create new profile dialog box displays. From the Profile Type drop-down list, select VIC Adapter Configuration.
Step 4 You can create a new profile by using either Create a new profile or choose Create profile from current configuration of the server.
Step 6 In the Profile Name field, enter a name for the profile.
Step 7 In the Cisco IMC Server Configuration Profile Manager window, click an adapter in the table to display its properties.
Step 8 In Adapter Cards area, update the following properties:
|
|
---|---|
Step 9 In the tabbed menu below the Adapter Card area, click the General tab.
Step 10 In the Modify Adapter Properties area, review the following information for the adapter:
|
|
---|---|
Whether FCoE Initialization Protocol (FIP) mode is enabled. FIP mode ensures that the adapter is compatible with current FCoE standards. |
|
Step 11 In the Pool Properties area, you can define pools for MAC, WWPN, and WWNN address for vNICs and vHBAs.
Step 12 In the tabbed menu below the Adapter Card area, click the vNICs tab.
Step 13 In the Host Ethernet Interfaces area, select a vNIC from the table.
Step 14 Click Properties to open the vNIC Properties dialog box. Review and update the properties for the selected vNIC. For more information on vNIC properties, see Modifying vNIC Properties, and Managing vNICs for detailed information on managing vNICs.
Step 15 For reviewing and updating VM FEXs, click the VM FEXs tab in the tabbed menu below the Adapter Cards area. For more information on the VM FEX properties, see Managing VM FEX.
Step 16 For reviewing and updating vHBAs, click the vHBAs tab in the tabbed menu below the Adapter Cards area. For more information on the vHBAs properties, see Managing vHBAs.
Step 17 Click Save Profile to save the profile in the database.
If you select Reset to Defaults, by default platform-default is set for all the parameters.
Note The power cap configuration, and power restore policies features are available on all Cisco UCS M4 servers which supports Cisco IMC 2.0(2c) or higher. These features are not supported on Cisco UCS E-Series servers.
Step 1 Launch the Cisco IMC Configuration Profile Manager Utility.
The Cisco IMC Configuration Profiles Manager window displays.
Step 2 Click the create new profile icon.
The Create new profile dialog box displays.
Step 3 From the Profile Type drop-down list, select Power Policy Configuration.
You can create a new profile by using either create a new profile or by selecting create profile from the current configuration of the server.
Step 5 In the Profile Name field, enter a name for the profile.
Step 6 See, Power Profiles to configure the power policies.
Note Run Power Characterization, Reset Profiles To Default, Recommended Power Cap, and Fan Policy Configuration options are not available.
Step 1 From the left pane of the Configuration Manager Console, select Assets and Compliance > Overview> Devices.
A list of all devices that are currently installed are displayed in the Name column of the Content Pane on the right side of the Configuration Manager Console.
Step 2 Right-click Devices, select Cisco IMC Server Configuration > Manage Cisco IMC Configuration Pools.
The Manage Cisco IMC Configuration Pools Wizard displays which allows you to add, edit and delete pools using this utility.
Step 3 Click the icon to create a new configuration pool.
Step 4 The Create New Configuration Pool dialog box displays. From the Pool Type drop-down list, select the configuration pool type that you want to create. This can be any of the following:
– World Wide Node Name (WWNN) Pool
a. From the Pool Type drop-down list, select IP Pool.
b. In the Add IP Blocks area, enter a name and a description for the pool.
d. In the Create Block of IP Address area, review and update the following parameters:
– From—The IP address of the server from which the servers are assigned to the server pool.
– Subnet Masks—The subnet mask for the server pool.
– Primary DNS—The primary DNS server address.
– Size—The size of the server pool that you want to create.
– Default Gateway—The default gateway.
a. From the Pool Type drop-down list, select MAC Pool.
b. In the Add MAC Address Blocks area, enter name and description for the pool.
d. In the Create MAC Address Block area of the Create Pool Block dialog box, review and update the following parameters:
– From—The MAC address of the server from which the servers are assigned to the server pool. By default, the MAC address is set to 00:25:B5:00:00:00.
a. From the Pool Type drop-down list, select World Wide Node Name (WWNN).
b. In the Create WWN Pool Block area enter the name and description for the pool.
d. In the Create WWN Block area of the Create Pool Block, review and update the following parameters:
– From—The WWNN address of the server from which the servers are assigned to the server pool. By default, the WWNN address is set to 20:00:00:25:B5:00:00:00.
a. From the Pool Type drop-down list, select World Wide Node Name (WWNN).
b. In the Create WWP Pool Block area enter the name and description for the pool.
c. In the Description field, add a description for the pool.
e. In the Create WWP Block area, review and update the following parameters:
– From—The WWPN address of the server from which the servers are assigned to the server pool. By default, the WWNN address is set to 20:00:00:25:B5:00:00:00.
– Size—The size of the server pool that you want to create.
In the Create WWP Pool Block dialog box, click Save.
Using the Cisco IMC Task Manager, you can view the status of the tasks and perform actions on it.
Step 1 Launch Configuration Manager by clicking Start > All Programs > Microsoft System Center> Configuration Manager > Microsoft Configuration Manager Console.
The Configuration Manager Console screen displays.
Step 2 From the left pane of the Microsoft Configuration Manager Console, select Assets and Compliance > Overview > Devices.
A list of all devices that are currently installed are displayed in the Name column of the Content Pane on the right side of the Microsoft Configuration Manager Console.
Step 3 Right-click Devices, select Cisco IMC Configuration > Cisco IMC Task Manager.
The Cisco IMC Task Manager window appears displaying the all the tasks that are initiated.
You can perform the following tasks on the IMC Task Manager window:
You can also perform the following actions on particular tasks from the IMC Task Manager window:
Cisco IMC Configuration Manager is used to configure Hardware configuration settings like BIOS, RAID, VIC Adapter and Cisco IMC Admin Configuration. You can also view the hardware inventory of a single or a group of servers based on how the IMC Configuration Manager is launched. You can also initiate a single workflow involving Firmware Update, RAID, BIOS, IMC Admin, VIC Adapter configuration and start the OS deployment process.
To deploy an operating system using the Cisco IMC Integration Pack :
Step 1 From the left pane of Microsoft Configuration Manager Console, select Assets and Compliance > Overview > Device Collections catalog.
Step 2 Right-click Device Collection and select any Cisco IMC Server collection. On selecting the collection all the Cisco Servers on the content pane are displayed. You can either right click on a server or launch the Server configuration Manager from the top ribbon.
The IMC Server Configuration Manager displays.
Step 3 Click Hardware Provisioning & OS Deployment.
Step 4 Under Select Firmware Update and RAID Configuration Profiles in the Content Pane on the right side of the Microsoft Configuration Manager Console, select the Update Firmware check-box.
Note Only if you want to update the firmware as part of the OS Deployment check the Update Firmware check-box and follow the steps for updating.
The Firmware Update Profile drop-down list is enabled.
Step 5 From the Firmware Update Profile drop-down list select the firmware update profile created using the Launch Cisco IMC Configuration Profile Manager.
Note The Profile Details section is updated based on the selection from Select Firmware Update Profile drop-down list.
Note If you want to configure RAID profile, select the Apply RAID Configuration check box and follow the steps for updating.
Step 6 From the RAID Configuration Profile drop-down list, select the RAID configuration profile created using the Launch Cisco IMC Configuration Profile Manager.
Step 7 Click Next to configure BIOS, VIC Adapter profile, Cisco IMC Admin, and Power Policies Configuration.
Step 8 To configure BIOS profile select Apply BIOS Configuration check box.
Step 9 From the BIOS Configuration Profile drop-down list, select the Profile created using the Launch Cisco IMC Configuration Profile Manager.
Step 10 To configure Cisco IMC admin profile check the Apply Cisco IMC Admin Configuration check box.
Step 11 From the Cisco IMC Admin Configuration drop-down list, select the Profile created using the Launch Cisco IMC Configuration Profile Manager.
Step 12 To configure Cisco VIC adapter profile check the Apply Cisco VIC Adapter Configuration check box.
Step 13 From the Cisco VIC Adapter Configuration Profile drop-down list, select the Profile created using the Launch Cisco IMC Configuration Profile Manager.
Step 14 To configure Power Policies, check the Apply Power Policies Configuration check box.
Step 16 Under Select Operating System Deployment Method, select either:
Note Configure PXE options from Administration workspace before deploying OS. For more details, refer to Microsoft Technet Configuration Manager documentation.
– Path — Specify the location of the shared ISO boot image. This has to be on network location and the format for specifying the location is through IP address only and not hostname, for example \10.a.b.c.d\test.iso.
– Domain\Username — Specify a valid user name in form of username@domain name, for example adminstrator@sccm.cisco.com.
– Password — Specify a valid password.
If you are launching from a device collection a list of servers appear or if it launched from a device the server details appears.
Step 18 Click Select all to choose all the servers on the list, or if you want perform this task only for specific servers then select them.
Cisco IMC Configuration confirmation pop-up window appears. Indicating that the task has been submitted to the service and if you want to launch the task manager to view the progress of the task.
Cisco IMC Task Manager window appears. For details on Cisco IMC Task Manager, see Cisco IMC Task Manager.
You can use the Cisco IMC Integration Pack to view the hardware inventory details of all the IMC servers under the Devices or Device Collections catalog in the left pane of the Configuration Manager Console.
Hardware inventory data gives you system information (such as available memory, which is Memory information, CPU, Power Supply, PCI Adapter, Network Adapter and Storage Adapter, processor type memory, number of CPUs and operating system) about each device.
Step 1 Launch Configuration Manager by clicking Start > All Programs > Microsoft System Center> Configuration Manager > Microsoft Configuration Manager Console.
The Configuration Manager Console screen displays.
Step 2 From the left pane of the Microsoft Configuration Manager Console, select Assets and Compliance > Overview > Device Collections catalog.
A list of all devices (including groups) that are currently installed displays in the Name column of the Content Pane on the right side of the Microsoft Configuration Manager Console.
Step 3 In the Name column of the Content Pane on the right side of the Microsoft Configuration Manager Console, right-click All Cisco IMC Servers, or any other device and choose Cisco IMC Configuration > Launch Cisco IMC Configuration Manager.
The IMC Server Configuration Manager displays.
Step 4 Click on Hardware Inventory.
The hardware inventory list based on the devices or groups selected are refreshed and displayed under Hardware Inventory in the Content Pane on the right side of the Microsoft Configuration Manager Console.
Step 5 Under Hardware Inventory, the following information displays:
Note The information displayed in each tab is based on the value selected in the Select Server drop-down list.
Step 6 To view the updated information of the hardware inventory components, login to Cisco IMC and choose Server > Inventory in the left pane of Cisco IMC.
The corresponding hardware inventory information displays in the right pane of Cisco IMC.
Note To update the firmware you must create a profile using the Launch Cisco IMC Configuration Profile Manager. For more information, see Creating a Firmware Update Profile Using Configuration Profile Manager.
Step 1 Launch Configuration Manager by clicking Start > All Programs > Microsoft System Center> Configuration Manager > Microsoft Configuration Manager Console.
The Configuration Manager Console screen displays.
Step 2 From the left pane of the Microsoft Configuration Manager Console, select Assets and Compliance > Overview > Device Collections catalog.
A list of all devices (including groups) that are currently installed displays in the Name column of the Content Pane on the right side of the Microsoft Configuration Manager Console.
Step 3 If you select All Cisco IMC Servers and try to launch the Server Configuration Manager, the Firmware Update option is disabled in the Hardware Provisioning & OS Deployment and Firmware Update tab is not available. This happens if All Cisco IMC Servers has more than one server. Select a model specific device collection, for example, All Cisco UCS C460 Servers, right-click and choose Cisco IMC Configuration > Launch Cisco IMC Configuration Manager.
The IMC Server Configuration Manager displays.
Step 4 Go to Firmware Update tab in the Cisco IMC Server Configuration Manager.
The Select Firmware Update Profile drop-down list is enabled.
Step 5 From the Select Firmware Update Profile drop-down list select the required profile.
Note The Profile Details section is updated based on the selection from Select Firmware Update Profile drop-down list.
If you are launching from a device collection a list of servers appear or if it launched from a device the server details appears.
Step 7 Click Select all to choose all the servers on the list, or if you want perform this task only for specific servers then select them.
Cisco IMC Configuration confirmation pop-up window appears. Indicating that the task has been submitted to the service and if you want to launch the task manager to view the progress of the task.
Cisco IMC Task Manager window appears. For details on Cisco IMC Task Manager, see Cisco IMC Task Manager.
For the C-Series servers, you must have Cisco IMC version 1.5(4) to apply the BIOS settings successfully.
Step 1 From the left pane of Configuration Manager Console, select Assets and Compliance > Overview >Device Collections catalog.
Step 2 From the Name column of the Content Pane on the right side of the Configuration Manager Console, right-click a device in the Name column.
Step 3 Choose Cisco IMC Configuration > Launch Cisco IMC Server Configuration Server Manager.
Step 4 In the left Pane, select BIOS Configuration.
Step 5 In the Select BIOS Configuration window, select Apply BIOS Configuration.
Step 6 From the BIOS Configuration Profile drop-down list, select the Profile created using the Launch Cisco IMC Configuration Profile Manager. See, Creating a BIOS Profile Using Profile Manager.
Step 7 Select Reboot Host Immediately option if you want to reboot the server immediately. Else, ignore this option.
If you are launching from a device collection a list of servers appear or if it launched from a device the server details appears.
Step 9 Click Select all to choose all the servers on the list, or if you want perform this task only for specific servers then select them.
Cisco IMC Configuration confirmation pop-up window appears. Indicating that the task has been submitted to the service and if you want to launch the task manager to view the progress of the task.
Cisco IMC Task Manager window appears. For details on Cisco IMC Task Manager, see Cisco IMC Task Manager.
Step 1 From the left pane of Configuration Manager Console, select Assets and Compliance > Overview >Device Collections catalog.
Step 2 From the Name column of the Content Pane on the right side of the Configuration Manager Console, right-click a device in the Name column.
Step 3 Choose Cisco IMC Configuration > Launch Cisco IMC Configuration Manager.
Step 4 In the left Pane, select Cisco IMC Admin Configuration.
Step 5 In the Select Cisco IMC Configuration window, select Apply Cisco IMC Configuration.
Step 6 From the Cisco IMC Admin Configuration Profile drop-down list, select the Profile created using the Launch Cisco IMC Configuration Profile Manager. See, Creating Cisco IMC Profile Admin Profile.
If you are launching from a device collection a list of servers appear or if it launched from a device the server details appears.
Step 8 Click Select all to choose all the servers on the list, or if you want perform this task only for specific servers then select them.
Cisco IMC Configuration confirmation pop-up window appears. Indicating that the task has been submitted to the service and if you want to launch the task manager to view the progress of the task.
Cisco IMC Task Manager window appears. For details on Cisco IMC Task Manager, see Cisco IMC Task Manager.
Step 1 From the left pane of Configuration Manager Console, select Assets and Compliance > Overview >Device Collections catalog.
Step 2 From the Name column of the Content Pane on the right side of the Configuration Manager Console, right-click a device in the Name column.
Step 3 Choose Cisco IMC Configuration > Launch Cisco IMC Server Configuration Server Manager.
Step 4 In the left Pane, select VIC Adapter Configuration.
Step 5 In the Select VIC Adapter Configuration window, select Apply VIC Adapter Configuration.
Step 6 From the VIC Adapter Configuration drop-down list, select the Profile created using the Launch Cisco IMC Configuration Profile Manager. See, Creating a VIC Adapter Using Profile Manager.
If you are launching from a device collection a list of servers appear or if it launched from a device the server details appears.
Step 8 Click Select all to choose all the servers on the list, or if you want perform this task only for specific servers then select them.
Cisco IMC Configuration confirmation pop-up window appears. Indicating that the task has been submitted to the service and if you want to launch the task manager to view the progress of the task.
Cisco IMC Task Manager window appears. For details on Cisco IMC Task Manager, see Cisco IMC Task Manager.
Step 1 From the left pane of Configuration Manager Console, select Assets and Compliance > Overview >Device Collections catalog.
Step 2 From the Name column of the Content Pane on the right side of the Configuration Manager Console, right-click a device in the Name column.
Step 3 Choose Cisco IMC Configuration > Launch Cisco IMC Server Configuration Server Manager.
Step 4 In the left Pane, select Power Policy Configuration.
Step 5 From the Power Policies Configuration Profile drop-down list, select the Profile created using the Launch Cisco IMC Configuration Profile Manager.
If you are launching from a device collection a list of servers appear or if it launched from a device the server details appears.
Step 7 Click Select all to choose all the servers on the list, or if you want to perform this task for specific servers, then select them.
Cisco IMC Configuration confirmation pop-up window appears. Indicating that the task has been submitted to the service and if you want to launch the task manager to view the progress of the task.
Cisco IMC Task Manager window appears. For details on Cisco IMC Task Manager, see Cisco IMC Task Manager.
Step 1 Launch Configuration Manager by clicking Start > All Programs > Microsoft System Center> Configuration Manager > Microsoft Configuration Manager Console.
The Configuration Manager Console screen displays.
Step 2 From the left pane of the Microsoft Configuration Manager Console, select Assets and Compliance > Overview > Device Collection catalog.
Select any Cisco IMC Collection. On selecting the collection you will see all the Cisco Servers on the Content Pane then you can either right-click on a server or launch it from the top ribbon.
Step 3 In the Name column of the Content Pane on the right side of the Configuration Manager Console, right-click All Cisco IMC Servers, or any other device and choose Cisco IMC Configuration > Launch Cisco Integrated Management Controller Web UI. The Cisco Integrated
The Cisco Integrated Management Controller Web UI displays.
Note The KVM console requires Java Version 1.6 Update (14) or higher and Cisco IMC version 1.5(2) or higher.
Note To launch the KVM console, you must have valid Cisco IMC user credentials with admin or user role privileges.
Step 1 Launch Configuration Manager by clicking Start > All Programs > Microsoft System Center> Configuration Manager > Microsoft Configuration Manager Console.
The Configuration Manager Console screen displays.
Step 2 From the left pane of the Microsoft Configuration Manager Console, select Assets and Compliance > Overview > Device Collection catalog.
Select any Cisco IMC Collection. On selecting the collection you will see all the Cisco Servers on the Content Pane then you can either right-click on a server or launch it from the top ribbon.
Step 3 You can launch the server from the top ribbon or double-click Device Collection.
Step 4 Right-click the server through which you want launch the KVM console and choose Launch Cisco IMC> Launch KVM Console.
Note If you are unable to launch KVM Console when Window like Configuration Manager or Profile Manager is open then launch KVM Console first and then open other windows.