Server Specifications

Server Specifications

This appendix lists the physical, environmental, and power specifications for the server.

Physical Specifications

The following table lists the physical specifications for the server.

Table 1. Physical Specifications

Description

Specification

Height

1.7 in. (43.2 mm)

Width

16.9 in. (429.0 mm)

Depth (length)

Server only: 30 in. (762 mm)

Server with slide rail: 31.5 in (800.1 mm)

Weight

  • Maximum, fully configured with rail kit: 42.432 lb (19.25 kg)

  • Maximum, not configured, no rail kit: 22.32 lb (10.13 kg)

Environmental Specifications

The following table lists the environmental requirements and specifications for the server.

Table 2. Physical Specifications

Description

Specification

Temperature, Operating

50 to 95°F (10 to 35°C)

Extended environment 41 to 104°F (5 to 40°C)

Derate the maximum temperature by 1°F for every 547 feet (1°C per every 300 meters) of altitude above 3117 feet (950 m).

Note 

Although the ASHRAE guidelines define multiple classes with different operating ranges, the recommended temperature and humidity operating range is the same for each class. The recommended temperature and humidity ranges are:

  • Operating Temperature: 64.4°F to 80.6°F (18°C to 27°C)

For general information, see the Cisco Unified Computing System Site Planning Guide: Data Center Power and Cooling.

Temperature, non-operating

(when the server is stored or transported)

–40 to 149°F (–40 to 65°C)

Maximum rate of change (operating and non-operating)

20°C per hour (36°C per hour)

Humidity (RH), operating

8 to 90% and 75°F (24°C) maximum dew-point temperature, non-condensing environment

Humidity (RH), non-operating

(when the server is stored or transported)

5 to 95% and 91°F (24°C) maximum dew-point temperature, non-condensing environment

Altitude, operating

0 to 10,000 feet (0 to 3050 meters)

Altitude, non-operating

(when the server is stored or transported)

0 to 40,000 feet (0 to 12,192 meters)

Sound power level

Measure A-weighted per ISO7779 LwAd (Bels)

Operation at 73°F (23°C)

5.8

Sound pressure level

Measure A-weighted per ISO7779 LpAm (dBA)

Operation at 73°F (23°C)

43

Power Specifications


Note
Do not mix power supply types or wattages in the server. Both power supplies must be identical.

You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator:

http://ucspowercalc.cisco.com

The power specifications for the supported power supply options are listed in the following sections.

Power Specifications, 1050 Watt AC Power Supply


Note

For the 80PLUS platinum certification documented in the following table, you can find test results at https://www.clearesult.com/80plus/.

Parameter

Specification

Input Connector

IEC320 C14

Input Voltage Range (V rms)

100 to 240

Maximum Allowable Input Voltage Range (V rms)

90 to 264

Frequency Range (Hz)

50 to 60

Maximum Allowable Frequency Range (Hz)

47 to 63

Maximum Rated Output (W)

Limited to 800W when operating at low-line input voltage, 100-127 V

800

 1050

Maximum Rated Standby Output (W)

36

Nominal Input Voltage (V rms)

100

120

208

230

Nominal Input Current (A rms)

9.2

7.6

5.8

5.2

Maximum Input at Nominal Input Voltage (W)

889

889

1167

1154

Maximum Input at Nominal Input Voltage (VA)

916

916

1203

1190

Maximum Rated Efficiency (%)

Minimum rating required to achieve 80PLUS platinum certification.

90

90

90

91

Maximum Rated Power Factor

Minimum rating required to achieve 80PLUS platinum certification.

0.97

0.97

0.97

0.97

Maximum Inrush Current (peak A)

15

Maximum Inrush Current (ms)

0.2

Maximum Ride-Through Time

Time output voltage remains within regulation limits at 100% load, during input voltage dropout

12

Power Specifications, 1050 Watt V2 DC Power Supply


Note

For the 80PLUS platinum certification documented in the following table, you can find test results at https://www.clearesult.com/80plus/.

Parameter

Specification

Input Connector

Molex 42820

Input Voltage Range (V rms)

-48

Maximum Allowable Input Voltage Range (V rms)

-40 to -72

Frequency Range (Hz)

NA

Maximum Allowable Frequency Range (Hz)

NA

Maximum Rated Output (W)

1050

Maximum Rated Standby Output (W)

36

Nominal Input Voltage (V rms)

-48

Nominal Input Current (A rms)

24

Maximum Input at Nominal Input Voltage (W)

1154

Maximum Input at Nominal Input Voltage (VA)

1154

Maximum Rated Efficiency (%)

Minimum rating required to achieve 80PLUS platinum certification.

91

Maximum Rated Power Factor

Minimum rating required to achieve 80PLUS platinum certification.

NA

Maximum Inrush Current (peak A)

15

Maximum Inrush Current (ms)

0.2

Maximum Ride-Through Time

This is the time output voltage remains within regulation limits at 100% load, during input voltage dropout

5

Power Specifications, 1600 Watt AC Power Supply


Note

For the 80PLUS platinum certification documented in the following table, you can find test results at https://www.clearesult.com/80plus/.

Parameter

Specification

Input Connector

IEC320 C14

Input Voltage Range (V rms)

200 to 240

Maximum Allowable Input Voltage Range (V rms)

180 to 264

Frequency Range (Hz)

50 to 60

Maximum Allowable Frequency Range (Hz)

47 to 63

Maximum Rated Output (W)

Limited to 800W when operating at low-line input voltage, 100-127 V

1600

Maximum Rated Standby Output (W)

36

Nominal Input Voltage (V rms)

100

120

208

230

Nominal Input Current (A rms)

NA

NA

8.8

7.9

Maximum Input at Nominal Input Voltage (W)

NA

NA

1778

1758

Maximum Input at Nominal Input Voltage (VA)

NA

NA

1833

1813

Maximum Rated Efficiency (%)

Minimum rating required to achieve 80PLUS platinum certification.

NA

NA

90

91

Maximum Rated Power Factor

Minimum rating required to achieve 80PLUS platinum certification.

NA

NA

0.97

0.97

Maximum Inrush Current (peak A)

30

Maximum Inrush Current (ms)

0.2

Maximum Ride-Through Time

The time that the output voltage remains within regulation limits at 100% load, during input voltage dropout

12

Power Specifications, 2300 Watt AC Power Supply


Note

For the 80PLUS platinum certification documented in the following table, you can find test results at https://www.clearesult.com/80plus/.

Parameter

Specification

Input Connector

IEC320 C20

Input Voltage Range (V rms)

100 to 240

Maximum Allowable Input Voltage Range (V rms)

90 to 264

Frequency Range (Hz)

50 to 60

Maximum Allowable Frequency Range (Hz)

47 to 63

Maximum Rated Output (W)

Limited to 800W when operating at low-line input voltage, 100-127 V

2300

Maximum Rated Standby Output (W)

36

Nominal Input Voltage (V rms)

100

120

208

230

Nominal Input Current (A rms)

13

11

12

10.8

Maximum Input at Nominal Input Voltage (W)

1338

1330

2490

2480

Maximum Input at Nominal Input Voltage (VA)

1351

1343

2515

2505

Maximum Rated Efficiency (%)

Minimum rating required to achieve 80PLUS platinum certification.

92

92

93

93

Maximum Rated Power Factor

Minimum rating required to achieve 80PLUS platinum certification.

0.99

0.99

0.97

0.97

Maximum Inrush Current (peak A)

30

Maximum Inrush Current (ms)

0.2

Maximum Ride-Through Time

Time output voltage remains within regulation limits at 100% load, during input voltage dropout

12

Power Cord Specifications

Each power supply in the server has a power cord. Standard power cords or jumper power cords are available for connection to the server. The shorter jumper power cords, for use in racks, are available as an optional alternative to the standard power cords.


Note

Only the approved power cords or jumper power cords listed below are supported.

The following tables show the supported power cords supported for less than 2300-Watt server PSUs, and more than 2300-Watt server PSUs.

Table 3. Supported Power Cords for Less than 2300 W Server PSUs

Description

Length (Feet)

Length (Meters)

CAB-48DC-40A-8AWG

DC power cord, -48 VDC, 40 A, 8 AWG

Three-socket Mini-Fit connector to three-wire

11.7

3.5

CAB-C13-C14-AC

AC power cord, 10 A; C13 to C14, recessed receptacle

9.8

3.0

CAB-250V-10A-AR

AC power cord, 250 V, 10 A

Argentina

8.2

2.5

CAB-C13-C14-2M-JP

AC Power Cord, C13 to C14

Japan PSE Mark

6.6

2.0

CAB-9K10A-EU

AC Power Cord, 250 V, 10 A; CEE 7/7 Plug

Europe

8.2

2.5

CAB-250V-10A-IS

AC Power Cord, SFS, 250 V, 10 A

Israel

8.2

2.5

CAB-250V-10A-CN

AC power cord, 250 V, 10 A

PR China

8.2

2.5

CAB-ACTW

AC power cord, 250 V, 10 A, C13 EL302

Taiwan

7.5

2.3

CAB-C13-CBN

AC cabinet jumper power cord, 250, 10 A,

C13 to C14

2.2

0.68

CAB-C13-C14-2M

AC cabinet jumper power cord, 250 V, 10 A,

C13 to C14

6.6

2.0

CAB-9K10A-AU

AC power cord, 250 V, 10 A, 3112 plug,

Australia

8.2

2.5

CAB-N5K6A-NA

AC power cord, 200/240 V, 6 A,

North America

8.2

2.5

CAB-250V-10A-ID

AC power Cord, 250 V, 10 A,

India

8.2

2.5

CAB-9K10A-SW

AC power cord, 250 V, 10 A, MP232 plug

Switzerland

8.2

2.5

CAB-250V-10A-BR

AC power Cord, 250 V, 10 A

Brazil

8.2

2.5

CAB-9K10A-UK

AC power cord, 250 V, 10 A (13 A fuse), BS1363 plug

United Kingdom

8.2

2.5

CAB-9K12A-NA

AC power cord, 125 V, 13 A, NEMA 5-15 plug

North America

8.2

2.5

CAB-AC-L620-C13

AC power cord, NEMA L6-20 to C13 connectors

6.6

2.0

CAB-9K10A-IT

AC power cord, 250 V, 10 A, CEI 23-16/VII plug

Italy

8.2

2.5

CAB-C13-C14-3M-IN

AC power cord jumper, C13 to C14 connector

India

9.8

3.0

CAB-C13-C14-IN

AC power cord jumper, C13 to C14 connector

India

4.6

1.4

CAB-9K10A-KOR

Power Cord, 125 V AC, 13 A, KSC8305 plug

Korea

6

1.8

CAB-JPN-3PIN

90-125 V AC, 12 A, NEMA 5-15 plug

Japan

2.4

R2XX-DMYMPWRCORD

No power cord; PID option for ordering server with no power cord

NA

NA
Table 4. Supported Power Cords for More than 2300 W Server PSUs

Description

Length (Feet)

Length (Meters)

CAB-C19-CBN

Cabinet Jumper Power Cord, 250 VAC, 16A, C20 to C19 connector

CAB-S132-C19-ISRL

S132 to IEC320 C19 connector

Israel

14

CAB-IR2073-C19-AR

IRSM 2073 to IEC320 C19 connector

Argentina

14

CAB-BS1363-C19-UK

BS-1363 to IEC 320 C19 connector

UK

14

CAB-SABS-C19-IND

SABS 164-1 to IEC 320 C19 connector

India

CAB-C2316-C19-IT

CEI 23-16 to IEC 320 C19

Italy

14

CAB-L520P-C19-US

NEMA L5-20 to IEC 320 C19

US

6

CAB-US515P-C19-US

NEMA 5-15 to IEC 320 C19

US

13

CAB-US520-C19-US

NEMA 5-20 to IEC 320 C19

US

14

CAB-US620P-C19-US

NEMA 6-20 to IEC-C19

US

13

CAB-C19-C20-IND

Power Cord C19 to C20 connector

India

UCSB-CABL-C19-BRZ

AC power cord NBR 14136 to C19 connector

Brazil

14

CAB-9K16A-BRZ

AC Power Cord, 250 V, 16 A, Source Plug EL224 to C19 connector

Brazil

CAB-ACS-16

AC Power Cord, 16A

Switzerland

CAB-AC-16A-AUS

AC Power Cord, 250 V, 16 A, C19 connector

Australia

CAB-C19-C20-3M-JP

AC Power Cord C19 to C20 connector, Japan PSE mark

Japan

10

3

CAB-AC-C19-TW

AC Power Cord, 250 V, 16 A, C19 connectors

Taiwan

CAB-AC-C6K-TWLK

AC Power Cord, 250 V, 16 A, twist lock NEMA L6-20 plug

US

CAB-AC-2500W-EU

AC Power Cord, 250 V, 16 A

Europe

CAB-AC-2500W-INT

AC Power Cord, 250 V, 16A

International

CAB-9K16A-KOR

AC Power Cord, 250 V, 16 A, Source Plug

Korea

CAB-AC-2500W-ISRL

AC Power Cord, 250 V, 16 A

Israel

CAB-AC16A-CH

AC Power Cord, 16 A

China

R2XX-DMYMPWRCORD

No power cord; PID option for ordering server with no power cord

NA

NA