System Specifications

C4200 Server Chassis Specifications

This appendix lists the physical, environmental, and power specifications for the server chassis.

Physical Specifications

The following table lists the physical specifications for the C4200 server chassis.

Table 1. Physical Specifications

Description

Specification

Height

3.4 in. (87.2 mm)

Width

16.9 in. (429.3 mm)

(width of the chassis rail-receiving surface; not including front latch-handles)

Depth (length)

Server only: 32.6 in. (827.6 mm)

Server with Cisco slide rails and CMA: 38.0 in (965.2 mm)

Maximum weight

(fully loaded chassis with four compute nodes)

95.8 lb. (43.5 Kg)

Environmental Specifications

The following table lists the environmental requirements for the C4200 server chassis.

Table 2. Physical Specifications

Description

Specification

Temperature, Operating

41 to 95°F (5 to 35°C)

Derate the maximum temperature by 1°C per every 305 meters of altitude above sea level.

For more information, see the Cisco Unified Computing System Site Planning Guide: Data Center Power and Cooling.

Temperature, non-operating

(when the server is stored or transported)

–40 to 149°F (–40 to 65°C)

Humidity (RH), operating

10 to 90%

Humidity (RH), non-operating

(when the server is stored or transported)

5 to 93%

Altitude, operating

0 to 10,000 feet

Altitude, non-operating

(when the server is stored or transported)

0 to 40,000 feet

Sound power level

Measure A-weighted per ISO7779 LwAd (Bels)

Operation at 73°F (23°C)

5.5

Sound pressure level

Measure A-weighted per ISO7779 LpAm (dBA)

Operation at 73°F (23°C)

40

Power Specifications


Note

Do not mix power supply types or wattages in the server. Both power supplies must be identical.

You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator:

http://ucspowercalc.cisco.com

The power specifications for the supported power supply options are listed in the following sections.

2400 W AC Power Supply

This section lists the specifications for each 2400 W AC power supply (Cisco part number UCSC-PSU3-2400W).

Table 3. 2400 W AC Specifications

Description

Specification

AC Input Voltage

Nominal range: 200–240 VAC

(Range: 180–264 VAC)

AC Input Frequency

Nominal range: 50 to 60Hz

(Range: 47–63 Hz)

Maximum AC Input current

16 A at 200 VAC

Maximum inrush current

35 A at 35° C

Maximum output power per PSU

2400 W at 200–240 VAC

Power supply output voltage

12 VDC

Power supply standby voltage

12 VDC

Efficiency rating

Climate Savers Platinum Efficiency (80Plus Platinum certified)

Form factor

RSP2

Input connector

IEC60320 C20

Power Cord Specifications

Each power supply in the server has a power cord. Standard power cords or jumper power cords are available for connection to the server. The shorter jumper power cords, for use in racks, are available as an optional alternative to the standard power cords.


Note

Only the approved power cords or jumper power cords listed below are supported.


Table 4. Supported Power Cords

Description

Length (Feet)

Length (Meters)

Argentina

CAB-IR2073-C19-AR

AC power cord, 16 A, 250 VAC

Plugs: IRSM 2073 to IEC 60320 C19

14

4.26

Australia and New Zealand

CAB-AC-16A-AUS

AC power cord, 16 A, 250 VAC

Plugs: AU20S3 to IEC 60320 C19

14

4.26

Brazil

CAB-9K16A-BRZ

AC power cord, 16 A, 250 VAC

Plugs: EL224 to IEC 60320 C19

14

4.26

Europe, Continental

CAB-AC-2500W-EU

AC power cord, 16 A, 250 VAC

Plugs: CEE 7/7 to IEC 60320 C19

14

4.26

India

CAB-SABS-C19-IND

AC power cord, 16 A, 250 VAC

Plugs: SABS 164-1 to IEC 60320 C19

14

4.26

International

CAB-AC-2500W-INT

AC power cord, 16 A, 250 VAC

Plugs: IEC 309 to IEC 60320 C19

14

4.26

Israel

CAB-AC-2500W-ISRL

AC power cord, 16 A, 250 VAC

Plugs: SI16S3 to IEC 60320 C19

14

4.26

Israel

CAB-S132-C19

AC power cord, 16 A, 250 VAC

Plugs: S132 to IEC 60320 C19

14

4.26

Italy

CAB-C2316-C19-IT

AC power cord, 16 A, 250 VAC

Plugs: CEI 23-16 to IEC 60320 C19

14

4.26

Japan

CAB-C19-C20-3M-JP

AC power cord, 16 A, 250 VAC

Plugs: C20 to IEC 60320 C19

Includes Japan PSE mark

10

3

Korea

CAB-9K16A-KOR

AC power cord, 16 A, 250 VAC

Plugs: Src plug to IEC 60320 C19

14

4.26

North America and Japan

Non-locking

CAB-AC-2500W-US1

AC power cord, 16 A, 250 VAC

Plugs: NEMA 6-20 to IEC 60320 C19

14

4.26

North America and Japan

Locking

CAB-AC-C6K-TWLK

AC power cord, 16 A, 250 VAC

Plugs: NEMA L6-20 to IEC 60320 C19

14

4.26

Peoples Republic of China

CAB-AC-16A-CH

AC power cord, 16 A, 250 VAC

Plugs: NGB16C to IEC 60320 C19

14

4.26

Taiwan

CAB-AC-C19-TW

AC power cord, 16 A, 250 VAC

Plugs: TW1-15P to IEC 60320 C19

7.5

2.3

Switzerland

CAB-ACS-16

AC power cord, 16 A, 250 VAC

Plugs: SEV 5934-2, Type 23 to IEC 60320 C19

8

2.5

United Kingdom

CAB-BS1363-C19-UK

AC power cord, 16 A, 250 VAC

Plugs: BS-1363 to IEC 60320 C19

14

4.26

United States

CAB-L520P-C19-US

AC power cord, 16 A, 250 VAC

Plugs: NEMA L5-20 to IEC 60320 C19

6

1.8

United States

CAB-US515-C19-US

AC power cord, 16 A, 250 VAC

Plugs: NEMA 5-15 to IEC 60320 C19

13

4

United States

CAB-US520-C19-US

AC power cord, 16 A, 250 VAC

Plugs: NEMA 5-20 to IEC 60320 C19

14

4.26

United States

CAB-US620-C19-US

AC power cord, 16 A, 250 VAC

Plugs: NEMA 6-20 to IEC 60320 C19

13

4

Cabinet Jumper Power Cord

CAB-C19-CBN

AC power cord, 16 A, 250 VAC

Plugs: IEC 60320 C20 to IEC 60320 C19

9

2.7

No power cord option

R2XX-DMYMPWRCORD

NA

NA