Index A
access control lists. See ACLs
ACLs
classification criteria 2-2
configuring matching 2-4
IP version 2-4
matching sequence 2-2
permit-deny 2-4
Address Resolution Protocol. See ARP
ARP
classification criteria 2-2
B
bandwidth allocation
bandwidth remaining 7-14, 7-15
configuration example 7-25
configuring 7-15
defined 7-1
egress traffic 7-3
ingress traffic 7-3
shaping 7-14
burst-optimized 8-2
burst sizes
policing 6-6
C
CIR
cir-markdown-map 6-5
defined 6-4
Class-based Flow Control 10-1
classification
and class maps 2-1
class-default 2-2
configuration example 2-17
criteria 2-1
defined 2-1
egress traffic 2-2
guidelines 2-3
ingress traffic 2-2
limitations 2-3
marking 4-1
matching alternatives 2-1
multiple criteria 2-2
troubleshooting 2-2, 2-4
class map
default 3-7
match all 2-2, 3-2
queuing default 3-8
queuing system-defined 3-8
system-defined 3-7
class-map
troubleshooting 2-2, 3-2
class maps
and marking 4-1
and policy maps 3-7
applying description 3-15
classifying traffic 3-3
configuration example 2-17
configuring 3-11
description 3-2
matching other class maps 2-15
maximum criteria 2-3
modifying 3-11, 7-2, 7-7
modifying CoS values 7-5
policing command 6-8
queuing 3-11, 7-4, 9-6
system-defined 3-7, 7-7, 7-9, 7-11, 7-15, 7-17, 7-19, 7-21
system-defined for type queuing 3-7, 7-6
troubleshooting 3-11
VDCs 2-2
verifying 2-17, 3-17
class-maps
troubleshooting 7-6
Class of Service. See CoS
CLNS
classification criteria 2-2
color-aware policers
description 6-1
color-aware policing
conditions 6-1
description 6-8
steps to configure 6-9
conforming traffic
actions 6-4, 6-5
color-aware policing 6-1
congestion 10-1
congestion avoidance
taildrop 7-3
WRED 7-3
Congestion Control 8-2
congestion management
configuring 7-14
egress traffic 7-3
ingress traffic 7-3
policy maps 7-14
Connectionless Network Service. See CLNS
COS
queuing 7-2
CoS
classification criteria 2-1
configuring marking 4-7
marking 4-2
modified in queues 7-7
modifying 7-5, 9-6
modifying system-defined class maps 7-7
modifying values 7-2
policy maps 7-15
queuing 7-5
taildrop 7-3, 7-9
values 7-2
WRED 7-11
CoS-to-queue mapping
modifying 7-2
CoS value
configuring matching 2-13
D
Data Center Bridging 8-1
data rates
policing 6-4
DCB cloud 8-1
DCBXP 10-2
defaults 1-6
default settings
bandwidth 7-17
per interface 3-7
statistics 11-1
Differentiated Services Code Point. See DSCP
DiffServ. See DSCP
discard class
classification criteria 2-2
configuring marking 4-9
configuring matching 2-10, 2-11
marking 4-2
documentation
additional publications i-xiii
dropping packets
policing 6-1
DSCP 4-1
classification criteria 2-1
configuring for marking 4-3
configuring matching 2-5
marking 4-1
modifying with policy maps 4-10
policing 6-8
standard values 2-5
trusted 4-10
E
egress traffic
bandwidth allocation 7-3
congestion management 7-3
Layer 2 interfaces 1-4
Layer 3 interfaces 1-4
marking 4-2
matching 2-2
policers 6-3
QoS policy map 4-10
queue limits 7-21
shaping 7-19
shared-mode port groups 7-4
examples
bandwidth allocation 7-25
classification 2-17
class maps 2-17
marking 4-15
mutation mapping 5-5
policing 6-18, 6-19
priority 7-24
queueing 7-23, 9-11
queue limit 7-24
scheduling 7-23, 9-11
setting ingress port CoS 7-23
shaping 7-24
statistics 11-4
taildrop 7-24
WRED 7-25
exceeding traffic
actions 6-5
color-aware 6-1
G
guidelines
classification 2-3
marking 4-2
policing 6-3
queuing 7-4, 9-5
scheduling 7-4, 9-5
shared policers 6-2
I
ingress traffic
applying CoS values 7-6
bandwidth allocation 7-3
congestion management 7-3
Layer 2 interfaces 1-4
Layer 3 interfaces 1-4
marking 4-2
matching 2-2
policers 6-3
QoS policy map 4-10
queue limits 7-21
queue size 7-9
setting ingress CoS 7-2
interfaces
default queuing class maps
defined 3-7
default queuing policy 1-6
IPC 8-1
IP precedence 4-1
classification criteria 2-1
configuring marking 4-5
configuring matching 2-7
marking 4-1
values 2-7
L
Layer 2 ports
policies applied 2-3
licenses
VLANs 2-2, 3-2, 4-2, 5-2, 6-2, 7-3, 8-3, 9-5, 10-2, 11-1
limitations
classification 2-3
marking 4-2
policing 6-3
queuing 7-4, 9-5
scheduling 7-4, 9-5
link-level flow control 10-1
M
markdown maps
policing 6-5, 6-13
marking 4-1
and class maps 4-1
and policy maps 4-1
and table maps 4-12 to ??
classification 4-1
configuration example 4-15
configuring DSCP 4-3
configuring for CoS 4-7
configuring for discard class 4-9
configuring for IP precedence 4-5
configuring for QoS internal label 4-7
CoS 4-2
description 4-1
discard class 4-2
egress traffic 4-2
guidelines 4-2
ingress traffic 4-2
limitations 4-2
multiple features 4-3
policing 6-1
QoS internal label 4-2
qos policies 3-4
troubleshooting 4-1, 4-2, 4-3, 4-12
matching
all criteria 2-2
configuring for ACLs 2-4
configuring for CoS values 2-13
configuring for discard class 2-10, 2-11
configuring for DSCP 2-5
configuring for IP precedence 2-7
configuring for Layer 3 packet length 2-12
configuring for protocol 2-9
configuring for QoS internal label 2-10
configuring RTP 2-14
configuring UDP port ranges 2-14
egress traffic 2-2
ignore specific criteria 2-2
ingress traffic 2-2
maximum criteria 2-3
multiple criteria 2-2
other class maps 2-15
troubleshooting 2-2, 2-10, 2-11
mesh-optimized 8-2
modifying QoS fields
marking 4-1
Modular QoS CLI. See MQC
mutation
troubleshooting 5-1
mutation mapping
configuration example 5-5
configuring 5-3
policy maps 5-1, 5-3
sequence on egress traffic 5-2
sequence on ingress traffic 5-1
service policies 5-3
troubleshooting 5-3
values 5-3
verifying 5-5
mutation marking
description 5-1
N
named aggregate policer
shared policers 6-15
Network QoS 8-1
network qos policy 8-1
P
Pause behavior 8-2
peak information rate. See PIR
Per Priority Pause 10-1
PIR
defined 6-4
pir-markdown-map 6-5
policers
applied to distributed traffic 6-3
color-aware 6-1
dual-rate
description 6-1
single-rate
description 6-1
types 6-5
policing
burst sizes 6-6
class maps 6-8
color-aware 3-7, 6-3, 6-8, 6-9
configuration examples 6-18, 6-19
data rates 6-4, 6-6
description 6-1
dropping packets 6-1
dual-rate 6-3
egress 6-13
guidelines 6-3
ingress 6-13
limitations 6-3
markdown 6-13
markdown maps 6-5
marking packets 6-1
multiple interfaces 6-2
named aggregate policer 6-15
qos policies 3-4
single-rate 6-3
traffic that exceeds 6-1
troubleshooting 6-4
verifying 6-18
policy maps
and class maps 3-3, 3-14
and marking 4-1
applying description 3-15
bandwidth 7-15
configuring 3-14
congestion management 7-14
CoS 7-15
default queuing policy maps 3-10
description 3-2
detaching 3-18
hierarchical 5-1
marking 4-3, 4-10
maximum classes 2-3
modifying 3-14
modifying CoS value 7-5
mutation mapping 5-1, 5-3
priority 7-15
queue size 7-15
queuing 7-4, 9-6
setting DSCP value 4-10
shaping 7-15
shared policers 6-2
system-defined 3-9, 7-5
taildrop 7-15
verifying 3-17
WRED 7-15
port channels
QoS policies 3-17
ports
trusted 7-5, 9-6
untrusted 7-5, 9-6
priority
configuration example 7-24
default settings 7-17
queues 7-3
priority flow control 10-1
priority queues
configuring 7-17
protocol
classification criteria 2-2
configuring matching 2-9
valid matches 2-9
Q
QoS
commit model 3-20
default behavior 1-6
enabling 3-17
queuing 7-1, 9-1
scheduling 7-1, 9-1
Session Manager 3-20
statistics 11-2
steps to configure 1-2
troubleshooting 7-2, 7-11
QoS internal label
classification criteria 2-1
configuring marking 4-7
configuring matching 2-10
marking 4-2
QoS policies
applying 3-17
attaching 3-17
implementing 3-17
multiple interfaces 3-17
port channels 3-17
VLANs 3-17
qos policies
description 3-2, 3-4
maximum 3-3
QoS troubleshooting 7-15
Quality of Service. See QoS
quanta 10-1
queue limits
configuration example 7-24
configuring 7-21
queues
nonpriority 7-17
priority 7-3, 7-17
shaping 7-19
strict priority 7-1
queue size
10-Gigabit Ethernet ports 7-9
policy maps 7-15
thresholds 7-9, 7-11
queue type
system-defined 7-1, 7-6
queuing
10-Gigabit Ethernet ports 7-4
by priority 7-1
class maps 7-4, 9-6
CoS 7-2
defined 7-1
guidelines 7-4, 9-5
limitations 7-4, 9-5
mapping to a queue 7-2
modifying CoS 7-6
modifying queuing maps 7-2
multiple queues 7-1
policy maps 7-4, 9-6
pq queues 7-17
shaping 7-3
shared-mode port groups 7-4
system-defined queues 7-1
system-defined queue types 7-1
thresholds 7-1
verifying 7-23, 9-10
queuing policies
applying 7-4, 9-6
description 3-2, 3-5
maximum 3-3
queuing 3-5
shaping 3-5
queuing policy
default 1-6
R
Real-Time Transport Protocol. See RTP
related documents i-xiii
RTP
classification criteria 2-2
configuring matching 2-14
S
scheduling
applying 7-1
defined 7-1
guidelines 7-4, 9-5
limitations 7-4, 9-5
modifying CoS 7-6
queuing policies 7-4, 9-6
shared-mode port groups 7-4
system-defined queues 7-1
verifying 7-23, 9-10
service policies
mutation mapping 5-3
Session Manger 3-20
setting ingress port CoS
configuration example 7-23
ingress traffic 7-2
shaping
bandwidth allocation 7-14
configuration example 7-24
defined 7-19
queuing 7-3
values 7-19
shared mode
egress queuing policy 7-4
shared policers
configuring 6-15
description 6-2
guidelines 6-2
policy maps 6-2
rates shared 6-10
steps to configuring 6-15
verifying 6-18
statistics
clearing 11-4
default settings 11-1
display example 11-4
displaying 1-5, 11-3
enabling 11-2
monitoring 11-1
strict priority
queues 7-1
system-defined
class maps 3-7
policy maps 3-9
queue types 7-1
type queuing class maps 3-7, 7-6
VDCs 3-3
system-defined class maps
bandwidth 7-15
modifying CoS values 7-7
priority 7-17
queue limits 7-21
shaping 7-19
taildrop 7-9
WRED 7-11
T
table maps
and policy maps 3-13
applying description 3-15
configuring 3-13
description 3-2
marking 4-12
maximums 5-3
modifying 3-13
verifying 3-17
taildrop
class 7-9
configuration example 7-24
congestion avoidance 7-3
CoS values 7-3, 7-9
thresholds 7-1, 7-9
thresholds
queue size 7-9
taildrop 7-1
WRED 7-1
troubleshooting 1-1
queuing 7-6
trusted port
setting ingress port CoS 7-2
Type of Service. See TOS
U
UDP port ranges
configuring matching 2-14
untrusted port
setting ingress port CoS 7-2
user-defined
VDCs 3-3
V
VDCs 1-1
accessing QoS objects 3-3
class maps 2-2, 7-3
queuing and scheduling 7-3
verifying
class maps 2-17, 3-17
mutation mapping 5-5
policing 6-18
policy maps 3-17
queuing 7-23, 9-10
scheduling 7-23, 9-10
table maps 3-17
violating traffic
actions 6-5
color-aware policing 6-1
virtual 8-1
Virtual Device Context 3-3
virtual device contexts 8-2
virtual links 8-1
VLANs
licenses 2-2, 3-2, 4-2, 5-2, 6-2, 7-3, 8-3, 9-5, 10-2, 11-1
QoS policies 3-17
W
weighted random early detection. See WRED
WRED
10-Gigabit Ethernet ports 7-4, 7-11
class 7-9
configuration example 7-25
congestion avoidance 7-3
CoS values 7-11
queue size 7-11
thresholds 7-1, 7-11
Index
A
access control lists. See ACLs
ACLs
classification criteria 2-2
configuring matching 2-4
IP version 2-4
matching sequence 2-2
permit-deny 2-4
Address Resolution Protocol. See ARP
ARP
classification criteria 2-2
B
bandwidth allocation
bandwidth remaining 7-14, 7-15
configuration example 7-25
configuring 7-15
defined 7-1
egress traffic 7-3
ingress traffic 7-3
shaping 7-14
burst-optimized 8-2
burst sizes
policing 6-6
C
CIR
cir-markdown-map 6-5
defined 6-4
Class-based Flow Control 10-1
classification
and class maps 2-1
class-default 2-2
configuration example 2-17
criteria 2-1
defined 2-1
egress traffic 2-2
guidelines 2-3
ingress traffic 2-2
limitations 2-3
marking 4-1
matching alternatives 2-1
multiple criteria 2-2
troubleshooting 2-2, 2-4
class map
default 3-7
match all 2-2, 3-2
queuing default 3-8
queuing system-defined 3-8
system-defined 3-7
class-map
troubleshooting 2-2, 3-2
class maps
and marking 4-1
and policy maps 3-7
applying description 3-15
classifying traffic 3-3
configuration example 2-17
configuring 3-11
description 3-2
matching other class maps 2-15
maximum criteria 2-3
modifying 3-11, 7-2, 7-7
modifying CoS values 7-5
policing command 6-8
queuing 3-11, 7-4, 9-6
system-defined 3-7, 7-7, 7-9, 7-11, 7-15, 7-17, 7-19, 7-21
system-defined for type queuing 3-7, 7-6
troubleshooting 3-11
VDCs 2-2
verifying 2-17, 3-17
class-maps
troubleshooting 7-6
Class of Service. See CoS
CLNS
classification criteria 2-2
color-aware policers
description 6-1
color-aware policing
conditions 6-1
description 6-8
steps to configure 6-9
conforming traffic
actions 6-4, 6-5
color-aware policing 6-1
congestion 10-1
congestion avoidance
taildrop 7-3
WRED 7-3
Congestion Control 8-2
congestion management
configuring 7-14
egress traffic 7-3
ingress traffic 7-3
policy maps 7-14
Connectionless Network Service. See CLNS
COS
queuing 7-2
CoS
classification criteria 2-1
configuring marking 4-7
marking 4-2
modified in queues 7-7
modifying 7-5, 9-6
modifying system-defined class maps 7-7
modifying values 7-2
policy maps 7-15
queuing 7-5
taildrop 7-3, 7-9
values 7-2
WRED 7-11
CoS-to-queue mapping
modifying 7-2
CoS value
configuring matching 2-13
D
Data Center Bridging 8-1
data rates
policing 6-4
DCB cloud 8-1
DCBXP 10-2
defaults 1-6
default settings
bandwidth 7-17
per interface 3-7
statistics 11-1
Differentiated Services Code Point. See DSCP
DiffServ. See DSCP
discard class
classification criteria 2-2
configuring marking 4-9
configuring matching 2-10, 2-11
marking 4-2
documentation
additional publications i-xiii
dropping packets
policing 6-1
DSCP 4-1
classification criteria 2-1
configuring for marking 4-3
configuring matching 2-5
marking 4-1
modifying with policy maps 4-10
policing 6-8
standard values 2-5
trusted 4-10
E
egress traffic
bandwidth allocation 7-3
congestion management 7-3
Layer 2 interfaces 1-4
Layer 3 interfaces 1-4
marking 4-2
matching 2-2
policers 6-3
QoS policy map 4-10
queue limits 7-21
shaping 7-19
shared-mode port groups 7-4
examples
bandwidth allocation 7-25
classification 2-17
class maps 2-17
marking 4-15
mutation mapping 5-5
policing 6-18, 6-19
priority 7-24
queueing 7-23, 9-11
queue limit 7-24
scheduling 7-23, 9-11
setting ingress port CoS 7-23
shaping 7-24
statistics 11-4
taildrop 7-24
WRED 7-25
exceeding traffic
actions 6-5
color-aware 6-1
G
guidelines
classification 2-3
marking 4-2
policing 6-3
queuing 7-4, 9-5
scheduling 7-4, 9-5
shared policers 6-2
I
ingress traffic
applying CoS values 7-6
bandwidth allocation 7-3
congestion management 7-3
Layer 2 interfaces 1-4
Layer 3 interfaces 1-4
marking 4-2
matching 2-2
policers 6-3
QoS policy map 4-10
queue limits 7-21
queue size 7-9
setting ingress CoS 7-2
interfaces
default queuing class maps
defined 3-7
default queuing policy 1-6
IPC 8-1
IP precedence 4-1
classification criteria 2-1
configuring marking 4-5
configuring matching 2-7
marking 4-1
values 2-7
L
Layer 2 ports
policies applied 2-3
licenses
VLANs 2-2, 3-2, 4-2, 5-2, 6-2, 7-3, 8-3, 9-5, 10-2, 11-1
limitations
classification 2-3
marking 4-2
policing 6-3
queuing 7-4, 9-5
scheduling 7-4, 9-5
link-level flow control 10-1
M
markdown maps
policing 6-5, 6-13
marking 4-1
and class maps 4-1
and policy maps 4-1
and table maps 4-12 to ??
classification 4-1
configuration example 4-15
configuring DSCP 4-3
configuring for CoS 4-7
configuring for discard class 4-9
configuring for IP precedence 4-5
configuring for QoS internal label 4-7
CoS 4-2
description 4-1
discard class 4-2
egress traffic 4-2
guidelines 4-2
ingress traffic 4-2
limitations 4-2
multiple features 4-3
policing 6-1
QoS internal label 4-2
qos policies 3-4
troubleshooting 4-1, 4-2, 4-3, 4-12
matching
all criteria 2-2
configuring for ACLs 2-4
configuring for CoS values 2-13
configuring for discard class 2-10, 2-11
configuring for DSCP 2-5
configuring for IP precedence 2-7
configuring for Layer 3 packet length 2-12
configuring for protocol 2-9
configuring for QoS internal label 2-10
configuring RTP 2-14
configuring UDP port ranges 2-14
egress traffic 2-2
ignore specific criteria 2-2
ingress traffic 2-2
maximum criteria 2-3
multiple criteria 2-2
other class maps 2-15
troubleshooting 2-2, 2-10, 2-11
mesh-optimized 8-2
modifying QoS fields
marking 4-1
Modular QoS CLI. See MQC
mutation
troubleshooting 5-1
mutation mapping
configuration example 5-5
configuring 5-3
policy maps 5-1, 5-3
sequence on egress traffic 5-2
sequence on ingress traffic 5-1
service policies 5-3
troubleshooting 5-3
values 5-3
verifying 5-5
mutation marking
description 5-1
N
named aggregate policer
shared policers 6-15
Network QoS 8-1
network qos policy 8-1
P
Pause behavior 8-2
peak information rate. See PIR
Per Priority Pause 10-1
PIR
defined 6-4
pir-markdown-map 6-5
policers
applied to distributed traffic 6-3
color-aware 6-1
dual-rate
description 6-1
single-rate
description 6-1
types 6-5
policing
burst sizes 6-6
class maps 6-8
color-aware 3-7, 6-3, 6-8, 6-9
configuration examples 6-18, 6-19
data rates 6-4, 6-6
description 6-1
dropping packets 6-1
dual-rate 6-3
egress 6-13
guidelines 6-3
ingress 6-13
limitations 6-3
markdown 6-13
markdown maps 6-5
marking packets 6-1
multiple interfaces 6-2
named aggregate policer 6-15
qos policies 3-4
single-rate 6-3
traffic that exceeds 6-1
troubleshooting 6-4
verifying 6-18
policy maps
and class maps 3-3, 3-14
and marking 4-1
applying description 3-15
bandwidth 7-15
configuring 3-14
congestion management 7-14
CoS 7-15
default queuing policy maps 3-10
description 3-2
detaching 3-18
hierarchical 5-1
marking 4-3, 4-10
maximum classes 2-3
modifying 3-14
modifying CoS value 7-5
mutation mapping 5-1, 5-3
priority 7-15
queue size 7-15
queuing 7-4, 9-6
setting DSCP value 4-10
shaping 7-15
shared policers 6-2
system-defined 3-9, 7-5
taildrop 7-15
verifying 3-17
WRED 7-15
port channels
QoS policies 3-17
ports
trusted 7-5, 9-6
untrusted 7-5, 9-6
priority
configuration example 7-24
default settings 7-17
queues 7-3
priority flow control 10-1
priority queues
configuring 7-17
protocol
classification criteria 2-2
configuring matching 2-9
valid matches 2-9
Q
QoS
commit model 3-20
default behavior 1-6
enabling 3-17
queuing 7-1, 9-1
scheduling 7-1, 9-1
Session Manager 3-20
statistics 11-2
steps to configure 1-2
troubleshooting 7-2, 7-11
QoS internal label
classification criteria 2-1
configuring marking 4-7
configuring matching 2-10
marking 4-2
QoS policies
applying 3-17
attaching 3-17
implementing 3-17
multiple interfaces 3-17
port channels 3-17
VLANs 3-17
qos policies
description 3-2, 3-4
maximum 3-3
QoS troubleshooting 7-15
Quality of Service. See QoS
quanta 10-1
queue limits
configuration example 7-24
configuring 7-21
queues
nonpriority 7-17
priority 7-3, 7-17
shaping 7-19
strict priority 7-1
queue size
10-Gigabit Ethernet ports 7-9
policy maps 7-15
thresholds 7-9, 7-11
queue type
system-defined 7-1, 7-6
queuing
10-Gigabit Ethernet ports 7-4
by priority 7-1
class maps 7-4, 9-6
CoS 7-2
defined 7-1
guidelines 7-4, 9-5
limitations 7-4, 9-5
mapping to a queue 7-2
modifying CoS 7-6
modifying queuing maps 7-2
multiple queues 7-1
policy maps 7-4, 9-6
pq queues 7-17
shaping 7-3
shared-mode port groups 7-4
system-defined queues 7-1
system-defined queue types 7-1
thresholds 7-1
verifying 7-23, 9-10
queuing policies
applying 7-4, 9-6
description 3-2, 3-5
maximum 3-3
queuing 3-5
shaping 3-5
queuing policy
default 1-6
R
Real-Time Transport Protocol. See RTP
related documents i-xiii
RTP
classification criteria 2-2
configuring matching 2-14
S
scheduling
applying 7-1
defined 7-1
guidelines 7-4, 9-5
limitations 7-4, 9-5
modifying CoS 7-6
queuing policies 7-4, 9-6
shared-mode port groups 7-4
system-defined queues 7-1
verifying 7-23, 9-10
service policies
mutation mapping 5-3
Session Manger 3-20
setting ingress port CoS
configuration example 7-23
ingress traffic 7-2
shaping
bandwidth allocation 7-14
configuration example 7-24
defined 7-19
queuing 7-3
values 7-19
shared mode
egress queuing policy 7-4
shared policers
configuring 6-15
description 6-2
guidelines 6-2
policy maps 6-2
rates shared 6-10
steps to configuring 6-15
verifying 6-18
statistics
clearing 11-4
default settings 11-1
display example 11-4
displaying 1-5, 11-3
enabling 11-2
monitoring 11-1
strict priority
queues 7-1
system-defined
class maps 3-7
policy maps 3-9
queue types 7-1
type queuing class maps 3-7, 7-6
VDCs 3-3
system-defined class maps
bandwidth 7-15
modifying CoS values 7-7
priority 7-17
queue limits 7-21
shaping 7-19
taildrop 7-9
WRED 7-11
T
table maps
and policy maps 3-13
applying description 3-15
configuring 3-13
description 3-2
marking 4-12
maximums 5-3
modifying 3-13
verifying 3-17
taildrop
class 7-9
configuration example 7-24
congestion avoidance 7-3
CoS values 7-3, 7-9
thresholds 7-1, 7-9
thresholds
queue size 7-9
taildrop 7-1
WRED 7-1
troubleshooting 1-1
queuing 7-6
trusted port
setting ingress port CoS 7-2
Type of Service. See TOS
U
UDP port ranges
configuring matching 2-14
untrusted port
setting ingress port CoS 7-2
user-defined
VDCs 3-3
V
VDCs 1-1
accessing QoS objects 3-3
class maps 2-2, 7-3
queuing and scheduling 7-3
verifying
class maps 2-17, 3-17
mutation mapping 5-5
policing 6-18
policy maps 3-17
queuing 7-23, 9-10
scheduling 7-23, 9-10
table maps 3-17
violating traffic
actions 6-5
color-aware policing 6-1
virtual 8-1
Virtual Device Context 3-3
virtual device contexts 8-2
virtual links 8-1
VLANs
licenses 2-2, 3-2, 4-2, 5-2, 6-2, 7-3, 8-3, 9-5, 10-2, 11-1
QoS policies 3-17
W
weighted random early detection. See WRED
WRED
10-Gigabit Ethernet ports 7-4, 7-11
class 7-9
configuration example 7-25
congestion avoidance 7-3
CoS values 7-11
queue size 7-11
thresholds 7-1, 7-11