- QoS CLI Index
- New and Changed Content for QoS CLI Config Guide
- Preface
- Overview
- Using Modular QoS CLI
- Configuring Classification
- Configuring Marking
- Configuring Mutation Mapping
- Configuring Policing
- Configuring Queuing and Scheduling
- Network QoS Policy Configuration
- Configuring Queuing and Scheduling on F1 Modules
- Configuring Priority Control
- Monitoring QoS Statistics
- Limits Appendix
- Additional References Appendix
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide, Release 5.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- January 31, 2018
Chapter: Limits Appendix
Configuration Limits for Cisco NX-OS Quality of Service Configuration Features, Release 5.1(1)
The features supported by Cisco NX-OS have maximum configuration limits. For some of the features, we have verified configurations that support limits less than the maximum.
The configuration limits are documented in the Cisco Nexus 7000 Series NX-OS Verified Scalability Guide.
Feedback