- QoS CLI Index
- New and Changed Content for QoS CLI Config Guide
- Preface
- Overview
- Using Modular QoS CLI
- Configuring Classification
- Configuring Marking
- Configuring Mutation Mapping
- Configuring Policing
- Configuring Queuing and Scheduling
- Network QoS Policy Configuration
- Configuring Queuing and Scheduling on F1 Modules
- Configuring Priority Control
- Monitoring QoS Statistics
- Limits Appendix
- Additional References Appendix
Preface
This preface describes the audience, organization, and conventions of the Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide, Release 5.x. It also provides information on how to obtain related documentation.
This chapter includes the following sections:
- Audience
- Organization
- Document Conventions
- Obtaining Documentation, Obtaining Support, and Security Guidelines
- Obtaining Documentation, Obtaining Support, and Security Guidelines
Audience
This guide is for experienced network administrators who configure and maintain Cisco NX-OS devices.
Organization
This publication is organized as follows:
|
|
|
|---|---|
Describes the new and changed information for each Cisco NX-OS software release. |
|
Describes how to use Modular QoS CLI (MQC) to define QoS policies. |
|
Describes how to configure the queuing and scheduling feature. |
|
Chapter 9, “Configuring Queuing and Scheduling on F1 Series Modules” |
Describes how to how to configure the queuing and scheduling feature on the F1 modules. |
Appendix A, “Configuration Limits for Cisco NX-OS Quality of Service Configuration Features, Release 5.1(1)” |
Lists information related to numerical limitations in implementing QoS. |
Lists related documents and RFCs, and how to get support and help from Cisco. |
Document Conventions
This publication uses the following conventions:
Note
Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.
Tip
Means the following information will help you solve a problem.
Command descriptions use these conventions:
Alternative, mutually exclusive elements are separated by vertical bars. |
Screen examples use these conventions:
Related Documentation
Cisco NX-OS includes the following documents:
Release Notes
NX-OS Configuration Guides
Cisco Nexus 7000 Series NX-OS Configuration Examples, Release 5.x
Configuring the Cisco Nexus 2000 Series Fabric Extender
Cisco Nexus 7000 Series NX-OS FabricPath Configuration Guide, Release 5.x
Configuring Feature Set for FabricPath
Cisco NX-OS FCoE Configuration Guide for Cisco Nexus 7000 and Cisco MDS 9500
Cisco Nexus 7000 Series NX-OS Fundamentals Configuration Guide, Release 5.x
Cisco Nexus 7000 Series NX-OS High Availability and Redundancy Guide, Release 5.x
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
Cisco Nexus 7000 Series NX-OS IP SLAs Configuration Guide
Cisco Nexus 7000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.x
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
Cisco Nexus 7000 Series NX-OS MPLS Configuration Guide
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide, Release 5.x
Cisco Nexus 7000 Series NX-OS OTV Configuration Guide, Release 5.x
Cisco Nexus 7000 Series OTV Quick Start Guide
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide, Release 5.x
Cisco Nexus 7000 Series NX-OS SAN Switching Configuration Guide
Cisco Nexus 7000 Series NX-OS Security Configuration Guide, Release 5.x
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide, Release 5.x
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 5.x
Cisco Nexus 7000 Series NX-OS Virtual Device Context Configuration Guide, Release 5.0
Cisco Nexus 7000 Series NX-OS Getting Started with Virtual Device Contexts, Release 5.x
NX-OS Command References
Cisco Nexus 7000 Series NX-OS Command Reference Master Index, Release 5.x
Cisco Nexus 7000 Series NX-OS FabricPath Command Reference, Release 5.x
Cisco NX-OS FCoE Command Reference for Cisco Nexus 7000 and Cisco MDS 9500
Cisco Nexus 7000 Series NX-OS Fundamentals Command Reference, Release 5.x
Cisco NX-OS High Availability and Redundancy Command Reference, Release 4.0
Cisco Nexus 7000 Series NX-OS Interfaces Command Reference, Release 5.x
Cisco Nexus 7000 Series NX-OS Layer 2 Switching Command Reference, Release 5.x
Cisco Nexus 7000 Series NX-OS LISP Command Reference
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
Cisco Nexus 7000 Series NX-OS Multicast Routing Command Reference, Release 5.x
Cisco Nexus 7000 Series NX-OS OTV Command Reference, Release 5.x
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference
Cisco Nexus 7000 Series NX-OS SAN Switching Command Reference
Cisco Nexus 7000 Series NX-OS Security Command Reference, Release 5.x
Cisco Nexus 7000 Series NX-OS System Management Command Reference, Release 5.x
Cisco Nexus 7000 Series NX-OS Unicast Routing Command Reference, Release 5.x
Cisco Nexus 7000 Series NX-OS Virtual Device Context Command Reference, Release 5.x
Other Software Documents
Cisco Nexus 7000 Series NX-OS MIB Quick Reference
Cisco Nexus 7000 Series NX-OS Software Upgrade and Downgrade Guide, Release 5.x
Cisco NX-OS System Messages Reference
Cisco Nexus 7000 Series NX-OS Troubleshooting Guide
Cisco NX-OS XML Management Interface User Guide, Release 5.x
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Feedback