System Specifications

Environmental Specifications

Environment

Specification

Temperature

Ambient operating temperature

32 to 104°F (0 to 40°C)

Ambient nonoperating

–40 to 158°F (–40 to 70°C)

Relative humidity

Nonoperating

5 to 95%

Operating

5 to 90%

Altitude

Operating

0 to 10,000 ft (3048 m). For China, it is 6,562 ft (2000 m).

Switch Dimensions

Switch

Width

Depth with Handles

Height

Cisco Nexus 9336C-SE1

17.3 inches (43.9 cm)

22.47 inches (57.08 cm)

1.72 inches (4.4 cm) (1 RU)

Switch and Module Weights and Quantities

Component

Weight per Unit

Quantity

Cisco Nexus 9336C-SE1 Chassis (N9336C-SE1)

17.4 lb (7.9 kg)

1

Fan Module

– Port-side exhaust (blue) (NXA-SFAN-35CFM-PE)

– Port-side intake (red) (NXA-SFAN-35CFM-PI)

—

0.27 lb (0.12 kg)

6

Power Supply Module

– 750-W AC port-side exhaust (blue) (NXA-PAC-750W-PE)

– 750-W AC port-side intake (red) (NXA-PAC-750W-PI)

—

2.1 lb (0.95 kg)

2 (1 for operations and 1 for redundancy)

Power Supply Module

– 1100-W DC PE port-side exhaust (blue) (NXA-PDC-1100W-PE)

– 1100-W DC PI port-side intake (red) (NXA-PDC-1100W-PI)

2.3 lb (1 kg)

2 (1 for operations and 1 for redundancy)

Power Supply Module

– 1100-W AC PE port-side exhaust (blue) (NXA-PAC-1100W-PE2)

– 1100-W AC PI port-side intake (burgundy) (NXA-PAC-1100W-PI2)

2.3 lb (1 kg)

2 (1 for operations and 1 for redundancy)

Power Supply Module

– 1100-W port-side exhaust HV (blue) (NXA-PHV-1100W-PE)

– 1100-W port-side intake HV (burgundy) (NXA-PHV-1100W-PI)

2.3 lb (1 kg)

2 (1 for operations and 1 for redundancy)

Switch Power Input Requirements

This table lists the typical amount of power that the switch consumes. It also lists the maximum amount of power that you must provision for the switch and power supply for peak conditions.


Note

Some power supplies have capabilities that are greater than the maximum power requirements for a switch. To determine the power consumption characteristics for the switch, use the typical and maximum requirements that are listed here.


Note

If you want to use optics that consume 5W or more power on all the 36 ports, you must install 1100W power supplies.

Switch Typical Power Consumption (AC or DC) Maximum Power Consumption (AC or DC) Heat Dissipation Requirement

Cisco Nexus 9336C-SE1

320 W

450 W

1535.46 BTUs per hour

Power Specifications

Power specifications include the specifications for each type of power supply module.

750-W AC Power Supply Specifications

These specifications apply to these power supplies:

  • NXA-PAC-750W-PE

  • NXA-PAC-750W-PI

Property Specification

Input Voltage Range

100 to 240 VAC

Input Frequency

50 to 60 Hz

Efficiency

80%

Output Power

750 W at rated input voltage

Redundancy Modes

n + 1, 1 + 1

RoHS Compliance

Yes

Hot Swappable

Yes

1100-W AC Power Supply Specifications

These specifications apply to all versions of the NXA-PAC-1100W power supply.

Property Specification

Input Voltage Range

100 VAC to 240 VAC

Input Frequency

50 to 60 Hz

Efficiency

80 Plus Platinum

Output Power

1,100 W at rated input voltage

Redundancy Modes

n + 1, 1 +1

RoHS Compliance

Yes

Hot Swappable

Yes

1100-W HVAC/HVDC Power Supply Specifications

These specifications apply to these power supplies:

  • NXA-PHV-1100W-PE

  • NXA-PHV-1100W-PI

Property Specification

Input voltage Range

100 VAC – 277 VAC

240 VDC – 380 VDC

Input Frequency

50 to 60 Hz

Efficiency

80 Plus Platinum

Output Power

1100 W at rated input voltage

Redundancy Modes

n + 1, 1 + 1

RoHS Compliance

Yes

Hot Swappable

Yes

1100-W DC Power Supply Specifications

These specifications apply to these power supplies:

  • NXA-PDC-1100W-PE

  • NXA-PDC-1100W-PI

Property Specification

Input voltage Range

-48 to -60 VDC

Efficiency

94% at 50% load

Output Power

1100 W at rated input voltage

Redundancy Modes

n + 1, 1 + 1

RoHS Compliance

Yes

Hot Swappable

Yes

Power Cable Specifications

These sections show the power cables that you can order and use with this switch.

Power Cable Specifications for AC Power Supplies

Power Type Power Cord Part Number Cord Set Description

CAB-C13-C14-2M

Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m)

CAB-C13-CBN

Cabinet jumper power cord, 250 VAC, 10 A, C14-C13 connectors, 2.3 feet (0.7 m)

Argentina

CAB-250V-10A-AR

250 V, 10 A, 8.2 feet (2.5 m)

Australia

CAB-9K10A-AU

250 VAC, 10 A, 3112 plug, 8.2 feet (2.5 m)

Brazil

CAB-250V-10A-BR

250 V, 10 A, 6.9 feet (2.1 m)

European Union

CAB-9K10A-EU

250 VAC, 10 A, CEE 7/7 plug, 8.2 feet (2.5 m)

India

CAB-IND-10A

10 A, 8.2 feet (2.5 m)

India

CAB-C13-C14-2M-IN

Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m)

India

CAB-C13-C14-3M-IN

Power Cord Jumper, C13-C14 Connectors, 9.8 feet (3.0 m)

Israel

CAB-250V-10A-IS

250 V, 10 A, 8.2 feet (2.5 m)

Italy

CAB-9K10A-IT

250 VAC, 10 A, CEI 23-16/VII plug, 8.2 feet (2.5 m)

Japan

CAB-C13-C14-2M-JP

Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m)

North America

CAB-9K12A-NA

125 VAC, 13 A, NEMA 5-15 plug, 8.2 feet (2.5 m)

North America

CAB-AC-L620-C13

NEMA L6-20-C13, 6.6 feet (2.0 m)

Peoples Republic of China

CAB-250V-10A-CN

250 V, 10 A, 8.2 feet (2.5 m)

South Africa

CAB-250V-10A-ID

250 V, 10 A, 8.2 feet (2.5 m)

Switzerland

CAB-9K10A-SW

250 VAC, 10 A, MP232 plug, 8.2 feet (2.5 m)

United Kingdom

CAB-9K10A-UK

250 VAC, 10 A, BS1363 plug (13 A fuse), 8.2 (2.5 m)

All except Argentina, Brazil, and Japan

NO-POWER-CORD

No power cord included with switch

Regulatory Standards Compliance Specifications

This table lists the regulatory standards compliance for the switch.

Table 1. Regulatory Standards Compliance: Safety and EMC

Specification

Description

Regulatory compliance

Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC.

Safety

  • CAN/CSA-C22.2 No. 60950-1 Second Edition

  • CAN/CSA-C22.2 No. 62368-1-19 Third Edition

  • ANSI/UL 60950-1 Second edition

  • IEC 62368-1

  • EN 62368-1

  • AS/NZS 62368-1

  • GB4943

  • UL 62368-1

EMC: Emissions

  • 47 CFR Part 15

  • CISPR32

  • CNS 15936

  • EN 55032

  • EN 61000-3-3

  • EN IEC 61000-3-2

  • EN300 386

  • ICES-003:2020:Iss:7

  • KS C 9610-3-2

  • KS C 9610-3-3

  • KS C 9832

  • VCCI-CISPR 32

EMC: Immunity

  • CISPR24

  • CISPR35

  • EN55035

  • EN IEC61000-6-1

  • EN300 386

  • EN61000-6-1

  • EN61000-6-2

  • IEC61000-6-1

  • IEC61000-6-2

  • KS C 9835

RoHS

The product is RoH-6 compliant with exceptions for leaded-ball grid-array (BGA) balls and lead press-fit connectors.