Show Commands
This chapter describes the Cisco NX-OS Routing Information Protocol (RIP) show commands.
show ip rip
To display the configuration and status of the Routing Information Protocol (RIP), use the show ip rip command in any mode.
show ip rip [ instance-tag ] [ vrf vrf-name ]
Syntax Description
instance-tag |
(Optional) RIP instance. The instance tag can be a maximum of 20 alphanumeric characters. |
vrf vrf-name |
(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters. The strings “default” and “all” are reserved VRF names. |
Command Default
No default behavior or values
Command Modes
Any command mode
Command History
|
|
|
6.0(2)N1(1) |
This command was introduced. |
Examples
This example shows how to display the RIP configuration information:
switch(config-if)# show ip rip
Related Commands
|
|
|
show ip rip interface |
Displays RIP information for an interface. |
show ip rip neighbor |
Displays RIP neighbor information. |
show ip rip policy statistics |
Displays RIP policy statistics. |
show ip rip route |
Displays RIP route information. |
show ip rip statistics |
Displays RIP statistics. |
show ip rip interface
To display interface entry information from the Routing Information Protocol (RIP) topology table, use the show ip rip interface command in any mode.
show ip rip interface [ type slot / port ] [ vrf vrf-name ]
Syntax Description
interface type slot / port |
(Optional) Specifies the interface. |
vrf vrf-name |
(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters. The strings “default” and “all” are reserved VRF names. |
Command Default
This command has no default settings.
Command Modes
Any command mode
Command History
|
|
|
6.0(2)N1(1) |
This command was introduced. |
Examples
This example shows how to display the neighbor information for a specified interface from the RIP topology table:
switch(config-if)# show ip rip interface ethernet 1/2
Related Commands
|
|
|
show ip rip |
Displays RIP information. |
show ip rip neighbor |
Displays RIP neighbor information. |
show ip rip policy statistics |
Displays RIP policy statistics. |
show ip rip route |
Displays RIP route information. |
show ip rip statistics |
Displays RIP statistics. |
show ip rip neighbor
To display the neighbor information from the Routing Information Protocol (RIP) topology table, use the show ip rip neighbor command in any mode.
show ip rip neighbor [ interface-type instance ] [ vrf vrf-name ]
Syntax Description
interface-type |
(Optional) Interface type. For more information, use the question mark (?) online help function. |
instance |
(Optional) Either a physical interface instance or a virtual interface instance. |
vrf vrf-name |
(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters. The strings “default” and “all” are reserved VRF names. |
Command Default
No default behavior or values
Command Modes
Any command mode
Command History
|
|
|
6.0(2)N1(1) |
This command was introduced. |
Examples
The following is sample output from the show rip neighbor command:
switch(config-if)# show ip rip neighbor
Related Commands
|
|
|
show ip rip |
Displays RIP information. |
show ip rip interface |
Displays RIP information for an interface. |
show ip rip policy statistics |
Displays RIP policy statistics. |
show ip rip route |
Displays RIP route information. |
show ip rip statistics |
Displays RIP statistics. |
show ip rip policy statistics
To display the policy statistics for the Routing Information Protocol (RIP), use the show ip rip policy statistics command in any mode.
show ip rip policy statistics redistribute { bgp id | direct | eigrp id | ospf id | static } [ vrf vrf-name ]
Syntax Description
bgp |
Displays policy statistics for the Border Gateway Protocol (BGP). |
direct |
Displays policy statistics for directly connected routes only. |
eigrp |
Displays policy statistics for Enhanced Interior Gateway Routing Protocol (EIGRP). |
ospf |
Displays policy statistics for Open Shortest Path First (OSPF) protocol. |
static |
Displays policy statistics for IP static routes. |
id |
For the bgp keyword, an autonomous system number. The range for 2-byte numbers is from 1 to 65535. The range for 4-byte numbers is from 1.0 to 65535.65535. For the eigrp keyword, an EIGRP instance name from which routes are to be redistributed. The value takes the form of a string. You can enter a decimal number, but Cisco Nexus 6000 stores it internally as a string. For the ospf keyword, an OSPF instance name from which routes are to be redistributed. The value takes the form of a string. You can enter a decimal number, but Cisco Nexus 6000 stores it internally as a string. |
vrf vrf-name |
(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters. The strings “default” and “all” are reserved VRF names. |
Command Default
No default behavior or values.
Command Modes
Any command mode
Command History
|
|
|
6.0(2)N1(1) |
This command was introduced. |
Examples
This example shows how to show policy statistics for EIGRP:
switch# show ip rip policy statistics redistribute eigrp 201
Related Commands
|
|
|
clear ip rip policy statistics |
Clears policy statistics for RIP. |
show ip rip |
Displays RIP information. |
show ip rip interface |
Displays RIP information for an interface. |
show ip rip neighbor |
Displays RIP information for a neighbor. |
show ip rip route |
Displays RIP route information. |
show ip rip statistics |
Displays RIP statistics. |
show ip rip route
To display route information from the Routing Information Protocol (RIP) topology table, use the show ip rip route command in any mode.
show ip rip route [ prefix / length ] [ summary ] [ vrf vrf-name ]
Syntax Description
prefix / length |
(Optional) IP prefix about which routing information should be displayed. |
summary |
(Optional) Displays information about summary routes. |
vrf vrf-name |
(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters. The strings “default” and “all” are reserved VRF names. |
Command Default
No default behavior or values
Command Modes
Any command mode
Command History
|
|
|
6.0(2)N1(1) |
This command was introduced. |
Examples
This example shows how to display route information from the RIP topology table:
switch# show ip rip route
Related Commands
|
|
|
show ip rip |
Displays RIP information. |
show ip rip interface |
Displays RIP information for an interface. |
show ip rip neighbor |
Displays RIP information for a neighbor. |
show ip rip policy statistics |
Displays policy statistics for RIP. |
show ip rip statistics |
Displays RIP statistics. |
show ip rip statistics
To display statistical entry information from the Routing Information Protocol (RIP) topology table, use the show ip rip statistics command in any mode.
show ip rip statistics [ interface-type instance ] [ vrf vrf-name ]
Syntax Description
interface-type |
(Optional) Interface type. For more information, use the question mark (?) online help function. |
instance |
(Optional) Either a physical interface instance or a virtual interface instance. |
vrf vrf-name |
(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters. The strings “default” and “all” are reserved VRF names. |
Command Default
No default behavior or values.
Command Modes
Any command mode
Command History
|
|
|
6.0(2)N1(1) |
This command was introduced. |
Examples
This example shows how to display the RIP statistics:
switch# show ip rip statistics
Related Commands
|
|
|
show ip rip |
Displays RIP information. |
show ip rip interface |
Displays RIP information for an interface. |
show ip rip neighbor |
Displays RIP information for a neighbor. |
show ip rip policy statistics |
Displays policy statistics for RIP. |
show ip rip route |
Displays RIP route information. |
Feedback