Cisco Nexus 3400-S Series NX-OS Command Reference (Show Commands), Release 9.2(2)

show mac-list

show mac-list { [ <mac_list_name> [ { seq <seq_no> | { <mac_addr> [ <mac_mask> ] } } ] ] } [ __readonly__ TABLE_mac_list <name> <seq> <action> <rule> ]

Syntax Description


show	Show running system information
mac-list	Show mac-lists
mac_list_name	(Optional) Name of mac list
seq	(Optional) Sequence number
seq_no	(Optional) Sequence number
mac_addr	(Optional) MAC address
mac_mask	(Optional) MAC mask
__readonly__	(Optional)
TABLE_mac_list	(Optional)
name	(Optional)
seq	(Optional)
action	(Optional)
rule	(Optional)

Command Mode

/exec

show mac address-table

show mac address-table <module> [ count ] [ static | dynamic | secure ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan1 <id> | [ vdc1 <vdc> | <e-vdc> ] | fe1 <feid> ] + } | { [ address <mac-addr> | interface <interface-name> | vlan <id> | [ vdc <vdc> | <e-vdc> ] | fe <feid> ] + } ] [ hex ] [ __readonly__ <entrycount> <l2entry> <header> <pi_e> <age> <rm> <ifname> <sec> <ntfy> <type> ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
module	Module Number
count	(Optional) Number of entries
static	(Optional) Display Static Entries
dynamic	(Optional) Display Dynamic Entries
secure	(Optional) Display Secure Entries
address	(Optional) address
address1	(Optional) address
mac-addr	(Optional) MAC Address
switch-id	(Optional) Remote Switch ID
swid	(Optional) Switch ID
sub-switch-id	(Optional) Remote Sub Switch ID
sswid	(Optional) Sub Switch ID
interface	(Optional) Interface
interface-name	(Optional) Interface name
vlan	(Optional) VLAN
vlan1	(Optional) VLAN
id	(Optional) VLAN ID
vdc	(Optional) VDC ID or Name
vdc1	(Optional) VDC ID or Name
vdc	(Optional) VDC ID
e-vdc	(Optional) Select VDC ID that match VDC Name
fe	(Optional) Forwarding Engine Instance ID(Zero based)
fe1	(Optional) Forwarding Engine Instance ID(Zero based)
feid	(Optional) FE ID value
hex	(Optional) display swid/sswid/lid in hex
__readonly__	(Optional)
header	(Optional) Header
pi_e	(Optional) Primary Interface of EARL
age	(Optional) Last seen age in seconds
rm	(Optional) RM
ifname	(Optional) interface name as string
sec	(Optional) secure
ntfy	(Optional) notify
entrycount	(Optional) Number of L2 entries
l2entry	(Optional) L2 Entry String
type	(Optional) MAC type - Static or Dynamic

Command Mode

/exec

show mac address-table

show mac address-table [ static | dynamic | secure ] [ local ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan1 <id> ] + } | { [ address <mac-addr> | interface <interface-name> | vlan <id> ] + } | { [ address2 <mac-addr> | interface1 <interface-name> | vni <vni-id> | peer-ip <peer-ipv4> ] + } | { [ address3 <mac-addr> | interface2 <interface-name> | vni1 <vni-id> | es { <esid-opt1> | <esid-opt2> | all } ] + } ] [ __readonly__ [ { TABLE_mac_address <disp_mac_addr><disp_type><disp_vlan> [ <disp_is_static> ] <disp_age><disp_is_secure><disp_is_ntfy><disp_port> } ] ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
static	(Optional) Display Static Entries
dynamic	(Optional) Display Dynamic Entries
secure	(Optional) Display Secure Entries
local	(Optional) Display MAC Entries Learned Locally and Not on the Overlay/VXLAN
address	(Optional) address
address1	(Optional) address
address2	(Optional) address
address3	(Optional) address
mac-addr	(Optional) MAC Address
switch-id	(Optional) Remote Switch ID
swid	(Optional) Switch ID
sub-switch-id	(Optional) Remote Sub Switch ID
sswid	(Optional) Sub Switch ID
interface	(Optional) Interface
interface1	(Optional) Interface
interface-name	(Optional) Interface name
interface2	(Optional) Interface
interface-name	(Optional) Interface name
vlan	(Optional) VLAN
vlan1	(Optional) VLAN
id	(Optional) VLAN ID
vni	(Optional) VXLAN Network Identifier
vni1	(Optional) VXLAN Network Identifier
vni-id	(Optional) VXLAN Network Identifier
peer-ip	(Optional) VXLAN Peer IP Address
peer-ipv4	(Optional) VXLAN Peer IP Address
es	(Optional) EVPN Remote ESID
esid-opt1	(Optional) EE:EE:EE:EE:EE:EE:EE:EE:EE:EE ESID Option 1
esid-opt2	(Optional) EEEE.EEEE.EEEE.EEEE.EEEE ESID Option 2
all	(Optional) all ESIs
__readonly__	(Optional)
TABLE_mac_address	(Optional) Mac address table
disp_is_static	(Optional) Static/Dynamic

Command Mode

/exec

show mac address-table aging-time

show mac address-table aging-time [ __readonly__ <age_str> <age> ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
aging-time	Configured/default age
__readonly__	(Optional)
age_str	(Optional) Age info
age	(Optional) Age time

Command Mode

/exec

show mac address-table count

show mac address-table count [ static | dynamic | secure ] [ local ] [ { [ interface <interface-name> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan <id> ] + } | { [ interface1 <interface-name> | vni <vni-id> | peer-ip <peer-ipv4> ] + } ] [ __readonly__ TABLE-macaddtblcount [ <id-out> ] [ <count_str> ] [ <total_cnt> ] [ <dyn_cnt> ] [ <otv_cnt> ] [ <static_cnt> ] [ <secure_cnt> ] ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
count	Number of MAC entries
static	(Optional) Display Static Entries
dynamic	(Optional) Display Dynamic Entries
secure	(Optional) Display Secure Entries
local	(Optional) Display MAC Entries Learned Locally and Not on the Overlay/VXLAN
vlan	(Optional) VLAN
id	(Optional) VLAN ID
interface	(Optional) Interface
interface1	(Optional) Interface
interface-name	(Optional) Interface name
switch-id	(Optional) Remote Switch ID
swid	(Optional) Switch ID
sub-switch-id	(Optional) Remote Sub Switch ID
sswid	(Optional) Sub Switch ID
vni	(Optional) VXLAN Network Identifier
vni-id	(Optional) VXLAN Network Identifier
peer-ip	(Optional) VXLAN Peer IP Address
peer-ipv4	(Optional) VXLAN Peer IP Address
__readonly__	(Optional)
TABLE-macaddtblcount	(Optional) MAC Address Dynamic Count Table
id-out	(Optional) MAC Address Table VLAN ID
count_str	(Optional) Count info
total_cnt	(Optional) Total count
dyn_cnt	(Optional) Dynamic count
otv_cnt	(Optional) OTV count
static_cnt	(Optional) Static count
secure_cnt	(Optional) Secure count

Command Mode

/exec

show mac address-table count es

show mac address-table count es { <es-id> | <es-id2> | all }

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
count	Number of MAC entries
es	EVPN Remote ESID
es-id	EE:EE:EE:EE:EE:EE:EE:EE:EE:EE ESID
es-id2	EEEE.EEEE.EEEE.EEEE.EEEE ESID
all	all ESIs

Command Mode

/exec

show mac address-table learning-mode

show mac address-table learning-mode [ vlan <id> ] [ __readonly__ <learning_mode_str> <vlan_id> <mode_str> ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
learning-mode	Learning Mode
vlan	(Optional) VLAN
id	(Optional) VLAN ID
__readonly__	(Optional)
learning_mode_str	(Optional) Learning Mode
vlan_id	(Optional) VLAN ID
mode_str	(Optional) Mode

Command Mode

/exec

show mac address-table limit

show mac address-table limit [ __readonly__ <limit_str> <limit> ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
limit	Configured/default mac limit
__readonly__	(Optional)
limit_str	(Optional) Limit info
limit	(Optional) Mac limit

Command Mode

/exec

show mac address-table loop-detect

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
loop-detect	Display Action for Mac Loop Detection

Command Mode

/exec

show mac address-table multicast

show mac address-table multicast [ vlan <vlan> | bridge-domain <bdid> ] [ __readonly__ [ TABLE_mac [ <vlan-id> ] [ <mac-addr> ] [ <type> ] [ <age> ] [ TABLE_oif [ <oifs> ] ] ] ]

Syntax Description


show	Show running system information
mac	MAC configuration commands
address-table	MAC Address Table
multicast	mcast mac OIF Static Entry
vlan	(Optional) VLAN
vlan	(Optional) VLAN
bridge-domain	(Optional) BD
bdid	(Optional) BD
__readonly__	(Optional)
TABLE_mac	(Optional)
vlan-id	(Optional)
mac-addr	(Optional)
type	(Optional)
age	(Optional)
TABLE_oif	(Optional)
oifs	(Optional)

Command Mode

/exec

show mac address-table notification mac-move

show mac address-table notification mac-move [ __readonly__ TABLE_mac_notif <disp_mm_status> <disp_mm_triggers> <disp_macs_added> <disp_macs_moved> <disp_macs_removed> ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
notification	Display Notification Information
mac-move	Mac Move Notification
__readonly__	(Optional) Read Only
TABLE_mac_notif	(Optional) Mac address notification table
disp_mm_status	(Optional) Mac Move Status
disp_mm_triggers	(Optional) # of triggers
disp_macs_added	(Optional) Number of MACs added since system bring up
disp_macs_removed	(Optional) Number of MACs removed since system bring up
disp_macs_moved	(Optional) Number of MACs moved since system bring up

Command Mode

/exec

show maintenance maint-delay

show maintenance maint-delay [ __readonly__ <delay> ]

Syntax Description


show	Show running system information
maintenance	maintenance
maint-delay	maintenance mode CLI release delay value
__readonly__	(Optional)
delay	(Optional) delay value in seconds

Command Mode

/exec

show maintenance on-reload reset-reasons

show maintenance on-reload reset-reasons [ __readonly__ [ TABLE_reset_reason <reset_reason> ] <rr_bitmap> ]

Syntax Description


show	Show running system information
maintenance	maintenance
on-reload	on reload maintenance mode configuration
reset-reasons	system reset reasons
__readonly__	(Optional)
TABLE_reset_reason	(Optional)
rr_bitmap	(Optional) reset reason bitmap
reset_reason	(Optional) system reset reason

Command Mode

/exec

show maintenance profile

show maintenance profile [ <mode> ] [ __readonly__ TABLE_profile <name> [ TABLE_cfg <cfg> ] ]

Syntax Description


show	Show running system information
maintenance	maintenance
profile	maintenance profile
mode	(Optional)
__readonly__	(Optional)
TABLE_profile	(Optional)
name	(Optional) profile name
TABLE_cfg	(Optional)
cfg	(Optional) profile config

Command Mode

/exec

show maintenance snapshot-delay

show maintenance snapshot-delay [ __readonly__ <delay> ]

Syntax Description


show	Show running system information
maintenance	maintenance
snapshot-delay	after_maintenance snapshot delay value
__readonly__	(Optional)
delay	(Optional) delay value in seconds

Command Mode

/exec

show maintenance timeout

show maintenance timeout [ __readonly__ <timeout> ]

Syntax Description


show	Show running system information
maintenance	maintenance
timeout	timeout value
__readonly__	(Optional)
timeout	(Optional) timeout value

Command Mode

/exec

show module

show module [ { <module> } | { <s0> [ <santa-cruz-range> ] } | { fabric [ <module> ] } ] [ __readonly__ { TABLE_modinfo <modinf> <ports> <modtype> <model> <status> } [ { TABLE_modpwrinfo <modpwr> <pwrstat> <reason> } ] { TABLE_modwwninfo <modwwn> <sw> <hw> <slottype> } [ { TABLE_modapplinfo <modappl> <desc> <applver> } ] { TABLE_modmacinfo <modmac> <mac> <serialnum> } { TABLE_moddiaginfo <mod> <diagstatus> } [ { TABLE_modinfo <modinf> <ports> <modtype> <model> <status> } [ { TABLE_modpwrinfo <modpwr> <pwrstat> <reason> } ] { TABLE_modwwninfo <modwwn> <sw> <hw> <slottype> } [ { TABLE_modapplinfo <modappl> <desc> <applver> } ] { TABLE_modmacinfo <modmac> <mac> <serialnum> } { TABLE_moddiaginfo <mod> <diagstatus> } ] [ { TABLE_xbarinfo <xbarinf> <xbarports> <xbartype> <xbarmodel> <xbarstatus> } ] [ { TABLE_xbarpwrinfo <xbarpwr> <xbarpwrstat> <xbarreason> } ] [ { TABLE_xbarwwninfo <xbarwwn> <xbarsw> <xbarhw> <xbarwwnstr> } ] [ { TABLE_xbarmacinfo <xbarmac> <xbarmacaddr> <xbarserialnum> } ] ]

Syntax Description


show	Show running system information
module	Show module information
module	(Optional) Enter module number
s0	(Optional) Show xbar information
santa-cruz-range	(Optional) please enter the xbar number
fabric	(Optional) Show fabric information
__readonly__	(Optional)
TABLE_modinfo	(Optional) Show Module info
modinf	(Optional) Module
ports	(Optional) Num Ports
modtype	(Optional) Module Type
model	(Optional) Model
status	(Optional) Status
TABLE_modpwrinfo	(Optional) Mod Pwr Info
modpwr	(Optional) Module
pwrstat	(Optional) Power Status
reason	(Optional) Reason
TABLE_modwwninfo	(Optional) Mod WWN Info
modwwn	(Optional) Module
sw	(Optional) SW Ver
hw	(Optional) HW Ver
slottype	(Optional) Slot
TABLE_modapplinfo	(Optional) Mod Appl image info
modappl	(Optional) Module
desc	(Optional) Image desc
applver	(Optional) Version
TABLE_modmacinfo	(Optional) Mod MAC Info
modmac	(Optional) Module
mac	(Optional) MAC
serialnum	(Optional) Serial Num
TABLE_moddiaginfo	(Optional) Mod diag info
mod	(Optional) Module
diagstatus	(Optional) Diag status
TABLE_xbarinfo	(Optional) Show xbar info
xbarinf	(Optional) Module
xbarports	(Optional) Num Ports
xbartype	(Optional) Module Type
xbarmodel	(Optional) Model
xbarstatus	(Optional) Status
TABLE_xbarpwrinfo	(Optional) Xbar Pwr Info
xbarpwr	(Optional) Module
xbarpwrstat	(Optional) Power Status
xbarreason	(Optional) Reason
TABLE_xbarwwninfo	(Optional) Xbar WWN Info
xbarwwn	(Optional) Module
xbarsw	(Optional) SW Ver
xbarhw	(Optional) HW Ver
xbarwwnstr	(Optional) WWN
TABLE_xbarmacinfo	(Optional) Xbar MAC Info
xbarmac	(Optional) Module
xbarmacaddr	(Optional) MAC
xbarserialnum	(Optional) Serial Num

Command Mode

/exec

show module bandwidth-fairness

show module <module> bandwidth-fairness [ __readonly__ { TABLE_fairness <statement> } ]

Syntax Description


show	Show running system information
module	Show module information
module	Enter module number
bandwidth-fairness	Show bandwidth fairness status
__readonly__	(Optional)
TABLE_fairness	(Optional)
statement	(Optional)

Command Mode

/exec

show module uptime

show module uptime [ __readonly__ { TABLE_uptimeinf <slot> <starttime> <daysup> <hoursup> <minutesup> <secondsup> } ]

Syntax Description


show	Show running system information
module	Show module information
uptime	Show how long the module has been up and running
__readonly__	(Optional)
TABLE_uptimeinf	(Optional) Show uptime info
slot	(Optional) Slot
starttime	(Optional) Start Time
daysup	(Optional) Days Up
hoursup	(Optional) Hours Up
minutesup	(Optional) Minutes Up
secondsup	(Optional) Seconds Up

Command Mode

/exec

show monitor

show monitor [ __readonly__ TABLE_session <session_number> <state> <state_reason> <description> ]

Syntax Description


show	Show running system information
monitor	Show Ethernet SPAN information
__readonly__	(Optional) Read only
TABLE_session	(Optional) show monitor
session_number	(Optional) session id
state	(Optional) State
state_reason	(Optional) State reason
description	(Optional) Session Description

Command Mode

/exec

show monitor session

show monitor session { all | <session_number> | warp | range <session_range> } [ brief ] [ __readonly__ [ TABLE_session <session_number> [ <description> ] [ <type> ] [ <version> ] [ <state> ] [ <state_reason> ] [ <err_desc> ] [ <flow_id> ] [ <switch_id> ] [ <erspan_granularity> ] [ <vrf_name> ] [ <acl_name> ] [ <erspan_ttl> ] [ <erspan_dscp> ] [ <header_type> ] [ <span_mtu> ] [ <span_sampling> ] [ <ip_filter> ] + [ <dst_ip> ] [ <origin_ip> ] [ <src_ip> ] [ <control_pkt_filter> ] [ TABLE_sources_rx [ <sources_rx> ] ] [ TABLE_sources_tx [ <sources_tx> ] ] [ TABLE_sources_both [ <sources_both> ] ] [ <source_vlans_rx> ] [ <source_vlans_tx> ] [ <source_vlans_both> ] [ <source_vsans_rx> ] [ <tree-id> <switchid> ] + [ <filter_vlans> ] [ <destinations> ] + [ <acl_destinations> ] + [ <rate_limit_cap> ] + [ <mtu_capability> ] + [ <sampling_capability> ] + [ <mcbe> ] + [ <l3_egress_span> ] + [ <erspan_acl> ] + [ <erspan_v3_cap> ] + [ <erspan_v2_cap> ] + [ <erspan_gran_cap> ] + [ <fex_ingress_intf> ] + [ <sources_rx_2> ] + [ <marker_time_intv> ] [ <marker_pkt_count> ] [ <marker_pkt_fail> ] [ <erspan_egress_if> ] ] ]

Syntax Description


show	Show running system information
monitor	Show Ethernet SPAN information
session	Show session info
all	All sessions
session_number
warp	warp session
range	Specify a range
session_range
brief	(Optional) Brief information
__readonly__	(Optional) Read only
TABLE_session	(Optional) show monitor
session_number	(Optional) session number
description	(Optional) Session Description
type	(Optional) Session type
version	(Optional) Erspan source version: v2/v3
state	(Optional) State
state_reason	(Optional) State reason
err_desc	(Optional) Error Description
flow_id	(Optional) erspan-id
switch_id	(Optional) erspan_switch-id
erspan_granularity	(Optional) ERSPAN Type III Granularity
vrf_name	(Optional) ERSPAN session VRF
acl_name	(Optional) ERSPAN session ACL
erspan_ttl	(Optional) ERSPAN TTL Value
erspan_dscp	(Optional) ERSPAN DSCP Value
header_type	(Optional) ERSPAN Header Type
span_mtu	(Optional) SPAN MTU value
span_sampling	(Optional) SPAN sampling range
ip_filter	(Optional) IP filter value
dst_ip	(Optional) ERSPAN destination IP
origin_ip	(Optional) ERSPAN origin IP at source router
src_ip	(Optional) ERSPAN source IP
control_pkt_filter	(Optional) Control packet filter value
TABLE_sources_rx	(Optional) ingress intf table
sources_rx	(Optional) List of ingress sources
TABLE_sources_tx	(Optional) egress intf table
sources_tx	(Optional) List of egress sources
TABLE_sources_both	(Optional) bi-direction intf table
sources_both	(Optional) List of sources in both directions
source_vlans_rx	(Optional) Source ingress vlan
source_vsans_rx	(Optional) Source ingress vsan
source_vlans_tx	(Optional) Source egress vlan
source_vlans_both	(Optional) Source vlans in both directions
tree-id	(Optional) proxy layer2 gateway source tree-id
switchid	(Optional) proxy layer2 gateway source switchid
filter_vlans	(Optional) Filter vlans
destinations	(Optional) List of destinations
acl_destinations	(Optional) List of interfaces that wont work for acl capture
rate_limit_cap	(Optional) List of modules that support Rate Limit
mtu_capability	(Optional) List of modules that support MTU
sampling_capability	(Optional) List of modules that support Sampling
mcbe	(Optional) List all modules that support multicast best effort
l3_egress_span	(Optional) List of modules that support L3 Multicast Egress SPAN
erspan_acl	(Optional) List of modules that support ERSPAN ACL filtering
erspan_v3_cap	(Optional) List of modules that support erspan version3
erspan_v2_cap	(Optional) List of modules that support erspan version2
erspan_gran_cap	(Optional) List of modules that support the granularity set
fex_ingress_intf	(Optional) List of fex interfaces that wont work for ingress span
erspan_egress_if	(Optional) Egress interface for ERSPAN SRC session
sources_rx_2	(Optional) List of ingress sources
marker_time_intv	(Optional) Marker packet interval
marker_pkt_count	(Optional) Marker packet count
marker_pkt_fail	(Optional) Marker packet fail count

Command Mode

/exec

show mvpn bgp mdt

show mvpn bgp { mdt-safi | auto-discovery } [ mdt-source <src-addr> ] [ __readonly__ { TABLE_entry <bgp_rd> <mdt_src> <mdt_grp> <local> } ]

Syntax Description


show	Show running system information
mvpn	Display Multicast VPN information
bgp	Display BGP related information
mdt-safi	Display Auto-discovered BGP MDT-SAFI database
auto-discovery	Display Auto-discovered BGP MDT-SAFI database
mdt-source	(Optional) Source address of MVPN neighbor
src-addr	(Optional) Source Address
__readonly__	(Optional)
TABLE_entry	(Optional)
bgp_rd	(Optional)
mdt_src	(Optional)
mdt_grp	(Optional)
local	(Optional)

Command Mode

/exec

show mvpn mdt encap

show mvpn mdt encap [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> { TABLE_encap <encap_index> <mdt_grp> <mdt_src> <mdt_src_if> } ]

Syntax Description


show	Show running system information
mvpn	Display Multicast VPN information
mdt	Display MDT information
encap	Display MDT Encap table
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
__readonly__	(Optional)
TABLE_vrf	(Optional)
out_context	(Optional)
TABLE_encap	(Optional)
encap_index	(Optional)
mdt_grp	(Optional)
mdt_src	(Optional)
mdt_src_if	(Optional)

Command Mode

/exec

show mvpn mdt route

show mvpn mdt route [ detail ] [ __readonly__ TABLE_vrf <out_context> [ TABLE_mroute <src_addr> <grp_addr> <uptime> <ref_count> ] ]

Syntax Description


show	Show running system information
mvpn	Display Multicast VPN information
mdt	Display MDT information
route	Display MDT route information
detail	(Optional) Display detailed information
__readonly__	(Optional)
TABLE_vrf	(Optional)
out_context	(Optional)
TABLE_mroute	(Optional)
src_addr	(Optional)
grp_addr	(Optional)
uptime	(Optional)
ref_count	(Optional)

Command Mode

/exec

show mvr

show mvr [ verbose ] [ __readonly__ <mvr-status> <mvr-default-vlan> <number-of-mvr-vlans> [ <mvr-group-list> <cfg-nodes> <interface-cfg-nodes> ] ]

Syntax Description


show	Show running system information
mvr	show mvr info
verbose	(Optional) Show in detail
__readonly__	(Optional)
mvr-status	(Optional)
mvr-default-vlan	(Optional)
number-of-mvr-vlans	(Optional)
mvr-group-list	(Optional)
cfg-nodes	(Optional)
interface-cfg-nodes	(Optional)

Command Mode

/exec

show mvr groups

show mvr groups [ __readonly__ [ TABLE_group_list <ip-address> <ip-max-addr> <rn-count-char> <rn-count> <mvr-vlan-string> <if-name> ] [ [ <interface-name> ] [ <mvr-vlan> ] [ TABLE_mvr_vlan <global-mvr-vlan> ] <mvr-groups> <mvr-receiver-type> <mvr-source-type> ] ]

Syntax Description


show	Show running system information
mvr	show mvr info
groups	show mvr groups config
__readonly__	(Optional)
TABLE_group_list	(Optional)
ip-address	(Optional)
ip-max-addr	(Optional)
rn-count-char	(Optional)
rn-count	(Optional)
mvr-vlan-string	(Optional)
if-name	(Optional)
interface-name	(Optional)
mvr-vlan	(Optional)
TABLE_mvr_vlan	(Optional)
global-mvr-vlan	(Optional)
mvr-groups	(Optional)
mvr-receiver-type	(Optional)
mvr-source-type	(Optional)

Command Mode

/exec

show mvr interface

show mvr interface [ <if0> ] [ __readonly__ [ TABLE_if_name <interface-name> <access-vlan> <src-rcvr> <igmp-mvr-port-status> <mvr-vlan-str> ] ]

Syntax Description


show	Show running system information
mvr	show mvr info
interface	show mvr interfaces
if0	(Optional) Interface name
__readonly__	(Optional)
TABLE_if_name	(Optional)
interface-name	(Optional)
access-vlan	(Optional)
src-rcvr	(Optional)
igmp-mvr-port-status	(Optional)
mvr-vlan-str	(Optional)

Command Mode

/exec

show mvr members

show mvr members [ interface <if0> ] [ __readonly__ [ TABLE_mvr_vlan <mvr-vlan> <group> <status> [ TABLE_members_if <if-name> ] ] [ <vlan> <mvr-group> ] ]

Syntax Description


show	Show running system information
mvr	show mvr info
members	show active mvr groups
interface	(Optional) show active mvr groups config on interface
if0	(Optional) Interface name
__readonly__	(Optional)
TABLE_mvr_vlan	(Optional)
mvr-vlan	(Optional)
group	(Optional)
status	(Optional)
TABLE_members_if	(Optional)
if-name	(Optional)
vlan	(Optional)
mvr-group	(Optional)

Command Mode

/exec

show mvr members count

show mvr members count [ __readonly__ [ TABLE_mvr_vlan <mvr-vlan> <mvr-members-count> ] ]

Syntax Description


show	Show running system information
mvr	show mvr info
members	show active mvr groups
count	Active mvr groups on each mvr-vlan
__readonly__	(Optional)
TABLE_mvr_vlan	(Optional)
mvr-vlan	(Optional)
mvr-members-count	(Optional)

Command Mode

/exec

show mvr members vlan

show mvr members { vlan <vlan-id> } [ __readonly__ [ TABLE_mvr_vlan <mvr-vlan> <grp> <stat> [ TABLE_interface_vlan <interface-name> ] ] ]

Syntax Description


show	Show running system information
mvr	show mvr info
members	show active mvr groups
vlan	vlan
vlan-id	Enter MVR Vlan
__readonly__	(Optional)
TABLE_mvr_vlan	(Optional)
mvr-vlan	(Optional)
grp	(Optional)
stat	(Optional)
TABLE_interface_vlan	(Optional)
interface-name	(Optional)

Command Mode

/exec

show mvr receiver-ports

show mvr receiver-ports [ <if0> ] [ __readonly__ [ TABLE_mvr_if_name <mvr-if-name> <mvr-vlan-str> <igmp-port-status> <rx_reports> <rx_leaves> ] ]

Syntax Description


show	Show running system information
mvr	show mvr info
receiver-ports	List MVR receiver ports
if0	(Optional) Interface name
__readonly__	(Optional)
TABLE_mvr_if_name	(Optional)
mvr-if-name	(Optional)
mvr-vlan-str	(Optional)
igmp-port-status	(Optional)
rx_reports	(Optional)
rx_leaves	(Optional)

Command Mode

/exec

show mvr source-ports

show mvr source-ports [ <if0> ] [ __readonly__ [ TABLE_mvr_if_name <mvr-if-name> <interface-name> <igmp-port-status> ] ]

Syntax Description


show	Show running system information
mvr	show mvr info
source-ports	List MVR source ports
if0	(Optional) Interface name
__readonly__	(Optional)
TABLE_mvr_if_name	(Optional)
mvr-if-name	(Optional)
interface-name	(Optional)
igmp-port-status	(Optional)

Command Mode

/exec

Bias-Free Language

Results

Chapter: M Show Commands

M Show Commands

show mac-list

show mac address-table

show mac address-table

show mac address-table aging-time

show mac address-table count

show mac address-table count es

show mac address-table learning-mode

show mac address-table limit

show mac address-table loop-detect

show mac address-table multicast

show mac address-table notification mac-move

show maintenance maint-delay

show maintenance on-reload reset-reasons

show maintenance profile

show maintenance snapshot-delay

show maintenance timeout

show module

show module bandwidth-fairness

show module uptime

show monitor

show monitor session

show mvpn bgp mdt

show mvpn mdt encap

show mvpn mdt route

show mvr

show mvr groups

show mvr interface

show mvr members

show mvr members count

show mvr members vlan

show mvr receiver-ports

show mvr source-ports

Was this Document Helpful?

Contact Cisco