- Overview of Cisco CSP 2100
- Installing Cisco CSP 2100
- Maintaining Cisco CSP 2100
- Cisco CSP 2100 Specifications
- Cisco CSP 2100 Power Cord Specifications
- Overview of Cisco CSP 2100 X2
- Installing Cisco CSP 2100 X2
- Maintaining Cisco CSP 2100 X2
- Cisco CSP 2100 X2 Specifications
- Cisco CSP 2100 X2 Power Cord Specifications
Cisco Cloud Services Platform 2100 Hardware Installation Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- September 2, 2015
Chapter: Cisco CSP 2100 Power Cord Specifications
Cisco CSP 2100 Power Cord Specifications
Supported Power Cords and Plugs
Each power supply has a separate power cord. Standard power cords or jumper power cords are available for connection to the Cisco CSP 2100. The jumper power cords, for use in racks, are available as an optional alternative to the standard power cords.
Note
Only the approved power cords or jumper power cords provided with the Cisco CSP 2100 are supported.
Table 5-1 lists the power cords for the Cisco CSP 2100 power supplies.
AC Power Cord Illustrations
This section includes the AC power cord illustrations.
Figure 5-13 CAB-C13-CBN, Jumper Power Cord (0.68 m)
Figure 5-14 CAB-C13-C14-2M, Jumper Power Cord (2 m)
Figure 5-15 CAB-C13-C14-AC, Jumper Power Cord (3 m)
Feedback