ACI F4* Commands
F4003: fltHcloudRouteTableEntryOperCloudRouteTableEntrySvcEpStateDown
Severity: major
Explanation: This fault occurs Service device is not present/discovered in the local region.
Recommended Action: None set.
F4004: fltHcloudRsToRouteTableEntryIntraCtxProfileRedirRoute
Severity: major
Explanation: This fault occurs service graph with redirect node is used with consumer and provider from same context profile(VNET/VPC).
Recommended Action: If you see this fault, remove the epgs from the contract.
F4005: fltHcloudSvcFaultInfoCloudPeeringRouteOverride
Severity: warning
Explanation: This fault occurs when peering installed route is over-written by Services UDR.
Recommended Action: None set.
F4006: fltFvExtRoutableUcastConnPInvalidConfiguration
Severity: major
Explanation: This fault occurs when there are specific configuration errors on a ucast tep IP.
- Please delete and reconfigure ucast tep IP or routable subnet (fabricExtRoutablePodSubnet) so that ucast tep doesnt overlapping with the unreserved portion of any routable subnet configured.
- Please delete and reconfigure one of the duplicate ucast tep IPs configured.
- Please delete and reconfigure corresponding ucast tep IP or rl pool (fabricExtSetupP) so that they dont overlap.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC
F4007: fltCloudNamingNamingPolicyNotReviewed
Severity: warning
Explanation: This fault occurs when cloudNaming Policy has not been reviewed and accepted. Cloud Resources will not deployed till this configuration is done.
- Navigate to the First time Setup Wizard.
- Navigate to the cloudNaming Rules, review the naming policy, deploy the Policy and save the config
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F4008: fltHcloudSGRuleGroupOperCloudNSGOperStateDown
Severity: minor
Explanation: This fault occurs when an erroneous configuration is pushed for creating a CloudEPg.
- Please check the fault message and make necessary changes to the config for creating the CloudEPg.
- In case of error in delete operation, please check if any pending dependent resources have to be cleaned up first on cloud provider.
- If fault still has not cleared, please contact Cisco TAC.
F4011: fltFabricRsFLinkFlapPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4012: fltPtpACfgFabricPtpDisabled
Severity: warning
Explanation: This fault occurs when the fabric PTP is disabled.
- If you are still seeing this, create tech-support ticket and contact Cisco TAC
F401296: fltTcaIsisIsisCsnpErrStats5minCsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401297: fltTcaIsisIsisCsnpErrStats15minCsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401298: fltTcaIsisIsisCsnpErrStats1hCsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401299: fltTcaIsisIsisCsnpErrStats1dCsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4013: fltPtpRsLatencyPtpModeResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F401300: fltTcaIsisIsisCsnpErrStats1wCsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401301: fltTcaIsisIsisCsnpErrStats1moCsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401302: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401303: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401312: fltTcaIsisIsisCsnpErrStats5minCsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401313: fltTcaIsisIsisCsnpErrStats15minCsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401314: fltTcaIsisIsisCsnpErrStats1hCsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401315: fltTcaIsisIsisCsnpErrStats1dCsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401316: fltTcaIsisIsisCsnpErrStats1wCsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401317: fltTcaIsisIsisCsnpErrStats1moCsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401318: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401319: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401320: fltTcaIsisIsisCsnpErrStats5minCsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401321: fltTcaIsisIsisCsnpErrStats15minCsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401322: fltTcaIsisIsisCsnpErrStats1hCsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401323: fltTcaIsisIsisCsnpErrStats1dCsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401324: fltTcaIsisIsisCsnpErrStats1wCsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401325: fltTcaIsisIsisCsnpErrStats1moCsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401326: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401327: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401328: fltTcaIsisIsisCsnpErrStats5minCsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401329: fltTcaIsisIsisCsnpErrStats15minCsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401330: fltTcaIsisIsisCsnpErrStats1hCsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401331: fltTcaIsisIsisCsnpErrStats1dCsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401332: fltTcaIsisIsisCsnpErrStats1wCsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401333: fltTcaIsisIsisCsnpErrStats1moCsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401334: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401335: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401336: fltTcaIsisIsisCsnpErrStats5minCsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401337: fltTcaIsisIsisCsnpErrStats15minCsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401338: fltTcaIsisIsisCsnpErrStats1hCsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401339: fltTcaIsisIsisCsnpErrStats1dCsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401340: fltTcaIsisIsisCsnpErrStats1wCsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401341: fltTcaIsisIsisCsnpErrStats1moCsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401342: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401343: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401344: fltTcaIsisIsisCsnpErrStats5minCsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401345: fltTcaIsisIsisCsnpErrStats15minCsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401346: fltTcaIsisIsisCsnpErrStats1hCsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401347: fltTcaIsisIsisCsnpErrStats1dCsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401348: fltTcaIsisIsisCsnpErrStats1wCsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401349: fltTcaIsisIsisCsnpErrStats1moCsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401350: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401351: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401376: fltTcaIsisIsisCsnpErrStats5minCsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401377: fltTcaIsisIsisCsnpErrStats15minCsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401378: fltTcaIsisIsisCsnpErrStats1hCsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401379: fltTcaIsisIsisCsnpErrStats1dCsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401380: fltTcaIsisIsisCsnpErrStats1wCsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401381: fltTcaIsisIsisCsnpErrStats1moCsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401382: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401383: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401384: fltTcaIsisIsisCsnpErrStats5minCsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401385: fltTcaIsisIsisCsnpErrStats15minCsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401386: fltTcaIsisIsisCsnpErrStats1hCsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401387: fltTcaIsisIsisCsnpErrStats1dCsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401388: fltTcaIsisIsisCsnpErrStats1wCsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401389: fltTcaIsisIsisCsnpErrStats1moCsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401390: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401391: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4014: fltQosRsEgressDppPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F401464: fltTcaIsisIsisCsnpErrStats5minCsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401465: fltTcaIsisIsisCsnpErrStats15minCsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401466: fltTcaIsisIsisCsnpErrStats1hCsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401467: fltTcaIsisIsisCsnpErrStats1dCsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401468: fltTcaIsisIsisCsnpErrStats1wCsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401469: fltTcaIsisIsisCsnpErrStats1moCsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401470: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401471: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401480: fltTcaIsisIsisCsnpErrStats5minCsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401481: fltTcaIsisIsisCsnpErrStats15minCsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401482: fltTcaIsisIsisCsnpErrStats1hCsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401483: fltTcaIsisIsisCsnpErrStats1dCsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401484: fltTcaIsisIsisCsnpErrStats1wCsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401485: fltTcaIsisIsisCsnpErrStats1moCsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401486: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401487: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401488: fltTcaIsisIsisCsnpErrStats5minCsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401489: fltTcaIsisIsisCsnpErrStats15minCsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401490: fltTcaIsisIsisCsnpErrStats1hCsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401491: fltTcaIsisIsisCsnpErrStats1dCsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401492: fltTcaIsisIsisCsnpErrStats1wCsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401493: fltTcaIsisIsisCsnpErrStats1moCsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401494: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401495: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401496: fltTcaIsisIsisCsnpErrStats5minCsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401497: fltTcaIsisIsisCsnpErrStats15minCsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401498: fltTcaIsisIsisCsnpErrStats1hCsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401499: fltTcaIsisIsisCsnpErrStats1dCsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4015: fltQosRsIngressDppPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F401500: fltTcaIsisIsisCsnpErrStats1wCsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401501: fltTcaIsisIsisCsnpErrStats1moCsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401502: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401503: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401504: fltTcaIsisIsisCsnpErrStats5minCsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401505: fltTcaIsisIsisCsnpErrStats15minCsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401506: fltTcaIsisIsisCsnpErrStats1hCsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401507: fltTcaIsisIsisCsnpErrStats1dCsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401508: fltTcaIsisIsisCsnpErrStats1wCsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401509: fltTcaIsisIsisCsnpErrStats1moCsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401510: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401511: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401512: fltTcaIsisIsisCsnpErrStats5minCsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401513: fltTcaIsisIsisCsnpErrStats15minCsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401514: fltTcaIsisIsisCsnpErrStats1hCsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401515: fltTcaIsisIsisCsnpErrStats1dCsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401516: fltTcaIsisIsisCsnpErrStats1wCsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401517: fltTcaIsisIsisCsnpErrStats1moCsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401518: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401519: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401544: fltTcaIsisIsisCsnpErrStats5minCsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401545: fltTcaIsisIsisCsnpErrStats15minCsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401546: fltTcaIsisIsisCsnpErrStats1hCsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401547: fltTcaIsisIsisCsnpErrStats1dCsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401548: fltTcaIsisIsisCsnpErrStats1wCsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401549: fltTcaIsisIsisCsnpErrStats1moCsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401550: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401551: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401552: fltTcaIsisIsisCsnpErrStats5minCsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401553: fltTcaIsisIsisCsnpErrStats15minCsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401554: fltTcaIsisIsisCsnpErrStats1hCsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401555: fltTcaIsisIsisCsnpErrStats1dCsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401556: fltTcaIsisIsisCsnpErrStats1wCsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401557: fltTcaIsisIsisCsnpErrStats1moCsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401558: fltTcaIsisIsisCsnpErrStats1qtrCsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401559: fltTcaIsisIsisCsnpErrStats1yearCsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4016: fltQospClassMicroburstUnsupportedHw
Severity: minor
Explanation: This fault occurs when Microburst config is pushed to unsupported hardware
- Look at any configuration issues
- Microburst not supported on this hardware,could upgrade to newer hardware
F401632: fltTcaIsisIsisCsnpStats5minCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401633: fltTcaIsisIsisCsnpStats15minCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401634: fltTcaIsisIsisCsnpStats1hCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401635: fltTcaIsisIsisCsnpStats1dCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401636: fltTcaIsisIsisCsnpStats1wCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401637: fltTcaIsisIsisCsnpStats1moCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401638: fltTcaIsisIsisCsnpStats1qtrCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401639: fltTcaIsisIsisCsnpStats1yearCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401648: fltTcaIsisIsisCsnpStats5minCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401649: fltTcaIsisIsisCsnpStats15minCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401650: fltTcaIsisIsisCsnpStats1hCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401651: fltTcaIsisIsisCsnpStats1dCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401652: fltTcaIsisIsisCsnpStats1wCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401653: fltTcaIsisIsisCsnpStats1moCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401654: fltTcaIsisIsisCsnpStats1qtrCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401655: fltTcaIsisIsisCsnpStats1yearCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401656: fltTcaIsisIsisCsnpStats5minCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401657: fltTcaIsisIsisCsnpStats15minCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401658: fltTcaIsisIsisCsnpStats1hCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401659: fltTcaIsisIsisCsnpStats1dCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401660: fltTcaIsisIsisCsnpStats1wCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401661: fltTcaIsisIsisCsnpStats1moCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401662: fltTcaIsisIsisCsnpStats1qtrCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401663: fltTcaIsisIsisCsnpStats1yearCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401664: fltTcaIsisIsisCsnpStats5minCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401665: fltTcaIsisIsisCsnpStats15minCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401666: fltTcaIsisIsisCsnpStats1hCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401667: fltTcaIsisIsisCsnpStats1dCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401668: fltTcaIsisIsisCsnpStats1wCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401669: fltTcaIsisIsisCsnpStats1moCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401670: fltTcaIsisIsisCsnpStats1qtrCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401671: fltTcaIsisIsisCsnpStats1yearCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401672: fltTcaIsisIsisCsnpStats5minCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401673: fltTcaIsisIsisCsnpStats15minCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401674: fltTcaIsisIsisCsnpStats1hCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401675: fltTcaIsisIsisCsnpStats1dCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401676: fltTcaIsisIsisCsnpStats1wCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401677: fltTcaIsisIsisCsnpStats1moCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401678: fltTcaIsisIsisCsnpStats1qtrCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401679: fltTcaIsisIsisCsnpStats1yearCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401680: fltTcaIsisIsisCsnpStats5minCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401681: fltTcaIsisIsisCsnpStats15minCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401682: fltTcaIsisIsisCsnpStats1hCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401683: fltTcaIsisIsisCsnpStats1dCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401684: fltTcaIsisIsisCsnpStats1wCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401685: fltTcaIsisIsisCsnpStats1moCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401686: fltTcaIsisIsisCsnpStats1qtrCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401687: fltTcaIsisIsisCsnpStats1yearCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401712: fltTcaIsisIsisCsnpStats5minCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401713: fltTcaIsisIsisCsnpStats15minCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401714: fltTcaIsisIsisCsnpStats1hCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401715: fltTcaIsisIsisCsnpStats1dCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401716: fltTcaIsisIsisCsnpStats1wCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401717: fltTcaIsisIsisCsnpStats1moCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401718: fltTcaIsisIsisCsnpStats1qtrCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401719: fltTcaIsisIsisCsnpStats1yearCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401720: fltTcaIsisIsisCsnpStats5minCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401721: fltTcaIsisIsisCsnpStats15minCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401722: fltTcaIsisIsisCsnpStats1hCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401723: fltTcaIsisIsisCsnpStats1dCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401724: fltTcaIsisIsisCsnpStats1wCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401725: fltTcaIsisIsisCsnpStats1moCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401726: fltTcaIsisIsisCsnpStats1qtrCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401727: fltTcaIsisIsisCsnpStats1yearCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4018: fltFvRsQosRequirementResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F401800: fltTcaIsisIsisCsnpStats5minCsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401801: fltTcaIsisIsisCsnpStats15minCsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401802: fltTcaIsisIsisCsnpStats1hCsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401803: fltTcaIsisIsisCsnpStats1dCsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401804: fltTcaIsisIsisCsnpStats1wCsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401805: fltTcaIsisIsisCsnpStats1moCsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401806: fltTcaIsisIsisCsnpStats1qtrCsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401807: fltTcaIsisIsisCsnpStats1yearCsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401816: fltTcaIsisIsisCsnpStats5minCsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401817: fltTcaIsisIsisCsnpStats15minCsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401818: fltTcaIsisIsisCsnpStats1hCsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401819: fltTcaIsisIsisCsnpStats1dCsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401820: fltTcaIsisIsisCsnpStats1wCsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401821: fltTcaIsisIsisCsnpStats1moCsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401822: fltTcaIsisIsisCsnpStats1qtrCsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401823: fltTcaIsisIsisCsnpStats1yearCsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401824: fltTcaIsisIsisCsnpStats5minCsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401825: fltTcaIsisIsisCsnpStats15minCsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401826: fltTcaIsisIsisCsnpStats1hCsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401827: fltTcaIsisIsisCsnpStats1dCsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401828: fltTcaIsisIsisCsnpStats1wCsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401829: fltTcaIsisIsisCsnpStats1moCsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401830: fltTcaIsisIsisCsnpStats1qtrCsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401831: fltTcaIsisIsisCsnpStats1yearCsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401832: fltTcaIsisIsisCsnpStats5minCsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401833: fltTcaIsisIsisCsnpStats15minCsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401834: fltTcaIsisIsisCsnpStats1hCsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401835: fltTcaIsisIsisCsnpStats1dCsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401836: fltTcaIsisIsisCsnpStats1wCsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401837: fltTcaIsisIsisCsnpStats1moCsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401838: fltTcaIsisIsisCsnpStats1qtrCsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401839: fltTcaIsisIsisCsnpStats1yearCsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401840: fltTcaIsisIsisCsnpStats5minCsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401841: fltTcaIsisIsisCsnpStats15minCsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401842: fltTcaIsisIsisCsnpStats1hCsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401843: fltTcaIsisIsisCsnpStats1dCsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401844: fltTcaIsisIsisCsnpStats1wCsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401845: fltTcaIsisIsisCsnpStats1moCsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401846: fltTcaIsisIsisCsnpStats1qtrCsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401847: fltTcaIsisIsisCsnpStats1yearCsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401848: fltTcaIsisIsisCsnpStats5minCsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401849: fltTcaIsisIsisCsnpStats15minCsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401850: fltTcaIsisIsisCsnpStats1hCsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401851: fltTcaIsisIsisCsnpStats1dCsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401852: fltTcaIsisIsisCsnpStats1wCsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401853: fltTcaIsisIsisCsnpStats1moCsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401854: fltTcaIsisIsisCsnpStats1qtrCsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401855: fltTcaIsisIsisCsnpStats1yearCsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401880: fltTcaIsisIsisCsnpStats5minCsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401881: fltTcaIsisIsisCsnpStats15minCsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401882: fltTcaIsisIsisCsnpStats1hCsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401883: fltTcaIsisIsisCsnpStats1dCsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401884: fltTcaIsisIsisCsnpStats1wCsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401885: fltTcaIsisIsisCsnpStats1moCsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401886: fltTcaIsisIsisCsnpStats1qtrCsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401887: fltTcaIsisIsisCsnpStats1yearCsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401888: fltTcaIsisIsisCsnpStats5minCsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401889: fltTcaIsisIsisCsnpStats15minCsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401890: fltTcaIsisIsisCsnpStats1hCsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401891: fltTcaIsisIsisCsnpStats1dCsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401892: fltTcaIsisIsisCsnpStats1wCsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401893: fltTcaIsisIsisCsnpStats1moCsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401894: fltTcaIsisIsisCsnpStats1qtrCsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401895: fltTcaIsisIsisCsnpStats1yearCsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "CSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "CSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401968: fltTcaIsisIsisCsnpStats5minFastCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401969: fltTcaIsisIsisCsnpStats15minFastCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401970: fltTcaIsisIsisCsnpStats1hFastCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401971: fltTcaIsisIsisCsnpStats1dFastCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401972: fltTcaIsisIsisCsnpStats1wFastCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401973: fltTcaIsisIsisCsnpStats1moFastCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401974: fltTcaIsisIsisCsnpStats1qtrFastCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401975: fltTcaIsisIsisCsnpStats1yearFastCsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401984: fltTcaIsisIsisCsnpStats5minFastCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401985: fltTcaIsisIsisCsnpStats15minFastCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401986: fltTcaIsisIsisCsnpStats1hFastCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401987: fltTcaIsisIsisCsnpStats1dFastCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401988: fltTcaIsisIsisCsnpStats1wFastCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401989: fltTcaIsisIsisCsnpStats1moFastCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401990: fltTcaIsisIsisCsnpStats1qtrFastCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401991: fltTcaIsisIsisCsnpStats1yearFastCsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401992: fltTcaIsisIsisCsnpStats5minFastCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401993: fltTcaIsisIsisCsnpStats15minFastCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401994: fltTcaIsisIsisCsnpStats1hFastCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401995: fltTcaIsisIsisCsnpStats1dFastCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401996: fltTcaIsisIsisCsnpStats1wFastCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401997: fltTcaIsisIsisCsnpStats1moFastCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401998: fltTcaIsisIsisCsnpStats1qtrFastCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F401999: fltTcaIsisIsisCsnpStats1yearFastCsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402000: fltTcaIsisIsisCsnpStats5minFastCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402001: fltTcaIsisIsisCsnpStats15minFastCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402002: fltTcaIsisIsisCsnpStats1hFastCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402003: fltTcaIsisIsisCsnpStats1dFastCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402004: fltTcaIsisIsisCsnpStats1wFastCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402005: fltTcaIsisIsisCsnpStats1moFastCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402006: fltTcaIsisIsisCsnpStats1qtrFastCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402007: fltTcaIsisIsisCsnpStats1yearFastCsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402008: fltTcaIsisIsisCsnpStats5minFastCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402009: fltTcaIsisIsisCsnpStats15minFastCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402010: fltTcaIsisIsisCsnpStats1hFastCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402011: fltTcaIsisIsisCsnpStats1dFastCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402012: fltTcaIsisIsisCsnpStats1wFastCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402013: fltTcaIsisIsisCsnpStats1moFastCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402014: fltTcaIsisIsisCsnpStats1qtrFastCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402015: fltTcaIsisIsisCsnpStats1yearFastCsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402016: fltTcaIsisIsisCsnpStats5minFastCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402017: fltTcaIsisIsisCsnpStats15minFastCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402018: fltTcaIsisIsisCsnpStats1hFastCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402019: fltTcaIsisIsisCsnpStats1dFastCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402020: fltTcaIsisIsisCsnpStats1wFastCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402021: fltTcaIsisIsisCsnpStats1moFastCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402022: fltTcaIsisIsisCsnpStats1qtrFastCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402023: fltTcaIsisIsisCsnpStats1yearFastCsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402048: fltTcaIsisIsisCsnpStats5minFastCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402049: fltTcaIsisIsisCsnpStats15minFastCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402050: fltTcaIsisIsisCsnpStats1hFastCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402051: fltTcaIsisIsisCsnpStats1dFastCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402052: fltTcaIsisIsisCsnpStats1wFastCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402053: fltTcaIsisIsisCsnpStats1moFastCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402054: fltTcaIsisIsisCsnpStats1qtrFastCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402055: fltTcaIsisIsisCsnpStats1yearFastCsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402056: fltTcaIsisIsisCsnpStats5minFastCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402057: fltTcaIsisIsisCsnpStats15minFastCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402058: fltTcaIsisIsisCsnpStats1hFastCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402059: fltTcaIsisIsisCsnpStats1dFastCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402060: fltTcaIsisIsisCsnpStats1wFastCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402061: fltTcaIsisIsisCsnpStats1moFastCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402062: fltTcaIsisIsisCsnpStats1qtrFastCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402063: fltTcaIsisIsisCsnpStats1yearFastCsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast CSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast CSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402136: fltTcaIsisIsisLanStats5minLanIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402137: fltTcaIsisIsisLanStats15minLanIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402138: fltTcaIsisIsisLanStats1hLanIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402139: fltTcaIsisIsisLanStats1dLanIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402140: fltTcaIsisIsisLanStats1wLanIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402141: fltTcaIsisIsisLanStats1moLanIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402142: fltTcaIsisIsisLanStats1qtrLanIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402143: fltTcaIsisIsisLanStats1yearLanIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402152: fltTcaIsisIsisLanStats5minLanIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402153: fltTcaIsisIsisLanStats15minLanIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402154: fltTcaIsisIsisLanStats1hLanIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402155: fltTcaIsisIsisLanStats1dLanIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402156: fltTcaIsisIsisLanStats1wLanIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402157: fltTcaIsisIsisLanStats1moLanIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402158: fltTcaIsisIsisLanStats1qtrLanIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402159: fltTcaIsisIsisLanStats1yearLanIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402160: fltTcaIsisIsisLanStats5minLanIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402161: fltTcaIsisIsisLanStats15minLanIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402162: fltTcaIsisIsisLanStats1hLanIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402163: fltTcaIsisIsisLanStats1dLanIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402164: fltTcaIsisIsisLanStats1wLanIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402165: fltTcaIsisIsisLanStats1moLanIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402166: fltTcaIsisIsisLanStats1qtrLanIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402167: fltTcaIsisIsisLanStats1yearLanIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402168: fltTcaIsisIsisLanStats5minLanIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402169: fltTcaIsisIsisLanStats15minLanIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402170: fltTcaIsisIsisLanStats1hLanIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402171: fltTcaIsisIsisLanStats1dLanIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402172: fltTcaIsisIsisLanStats1wLanIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402173: fltTcaIsisIsisLanStats1moLanIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402174: fltTcaIsisIsisLanStats1qtrLanIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402175: fltTcaIsisIsisLanStats1yearLanIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402176: fltTcaIsisIsisLanStats5minLanIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402177: fltTcaIsisIsisLanStats15minLanIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402178: fltTcaIsisIsisLanStats1hLanIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402179: fltTcaIsisIsisLanStats1dLanIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402180: fltTcaIsisIsisLanStats1wLanIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402181: fltTcaIsisIsisLanStats1moLanIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402182: fltTcaIsisIsisLanStats1qtrLanIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402183: fltTcaIsisIsisLanStats1yearLanIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402184: fltTcaIsisIsisLanStats5minLanIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402185: fltTcaIsisIsisLanStats15minLanIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402186: fltTcaIsisIsisLanStats1hLanIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402187: fltTcaIsisIsisLanStats1dLanIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402188: fltTcaIsisIsisLanStats1wLanIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402189: fltTcaIsisIsisLanStats1moLanIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402190: fltTcaIsisIsisLanStats1qtrLanIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402191: fltTcaIsisIsisLanStats1yearLanIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4022: fltCloudRsSubnetToCtxResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F402216: fltTcaIsisIsisLanStats5minLanIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402217: fltTcaIsisIsisLanStats15minLanIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402218: fltTcaIsisIsisLanStats1hLanIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402219: fltTcaIsisIsisLanStats1dLanIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402220: fltTcaIsisIsisLanStats1wLanIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402221: fltTcaIsisIsisLanStats1moLanIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402222: fltTcaIsisIsisLanStats1qtrLanIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402223: fltTcaIsisIsisLanStats1yearLanIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402224: fltTcaIsisIsisLanStats5minLanIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402225: fltTcaIsisIsisLanStats15minLanIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402226: fltTcaIsisIsisLanStats1hLanIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402227: fltTcaIsisIsisLanStats1dLanIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402228: fltTcaIsisIsisLanStats1wLanIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402229: fltTcaIsisIsisLanStats1moLanIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402230: fltTcaIsisIsisLanStats1qtrLanIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402231: fltTcaIsisIsisLanStats1yearLanIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402304: fltTcaIsisIsisLanStats5minLanIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402305: fltTcaIsisIsisLanStats15minLanIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402306: fltTcaIsisIsisLanStats1hLanIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402307: fltTcaIsisIsisLanStats1dLanIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402308: fltTcaIsisIsisLanStats1wLanIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402309: fltTcaIsisIsisLanStats1moLanIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402310: fltTcaIsisIsisLanStats1qtrLanIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402311: fltTcaIsisIsisLanStats1yearLanIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402320: fltTcaIsisIsisLanStats5minLanIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402321: fltTcaIsisIsisLanStats15minLanIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402322: fltTcaIsisIsisLanStats1hLanIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402323: fltTcaIsisIsisLanStats1dLanIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402324: fltTcaIsisIsisLanStats1wLanIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402325: fltTcaIsisIsisLanStats1moLanIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402326: fltTcaIsisIsisLanStats1qtrLanIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402327: fltTcaIsisIsisLanStats1yearLanIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402328: fltTcaIsisIsisLanStats5minLanIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402329: fltTcaIsisIsisLanStats15minLanIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402330: fltTcaIsisIsisLanStats1hLanIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402331: fltTcaIsisIsisLanStats1dLanIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402332: fltTcaIsisIsisLanStats1wLanIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402333: fltTcaIsisIsisLanStats1moLanIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402334: fltTcaIsisIsisLanStats1qtrLanIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402335: fltTcaIsisIsisLanStats1yearLanIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402336: fltTcaIsisIsisLanStats5minLanIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402337: fltTcaIsisIsisLanStats15minLanIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402338: fltTcaIsisIsisLanStats1hLanIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402339: fltTcaIsisIsisLanStats1dLanIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402340: fltTcaIsisIsisLanStats1wLanIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402341: fltTcaIsisIsisLanStats1moLanIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402342: fltTcaIsisIsisLanStats1qtrLanIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402343: fltTcaIsisIsisLanStats1yearLanIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402344: fltTcaIsisIsisLanStats5minLanIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402345: fltTcaIsisIsisLanStats15minLanIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402346: fltTcaIsisIsisLanStats1hLanIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402347: fltTcaIsisIsisLanStats1dLanIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402348: fltTcaIsisIsisLanStats1wLanIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402349: fltTcaIsisIsisLanStats1moLanIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402350: fltTcaIsisIsisLanStats1qtrLanIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402351: fltTcaIsisIsisLanStats1yearLanIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402352: fltTcaIsisIsisLanStats5minLanIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402353: fltTcaIsisIsisLanStats15minLanIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402354: fltTcaIsisIsisLanStats1hLanIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402355: fltTcaIsisIsisLanStats1dLanIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402356: fltTcaIsisIsisLanStats1wLanIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402357: fltTcaIsisIsisLanStats1moLanIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402358: fltTcaIsisIsisLanStats1qtrLanIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402359: fltTcaIsisIsisLanStats1yearLanIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402384: fltTcaIsisIsisLanStats5minLanIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402385: fltTcaIsisIsisLanStats15minLanIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402386: fltTcaIsisIsisLanStats1hLanIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402387: fltTcaIsisIsisLanStats1dLanIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402388: fltTcaIsisIsisLanStats1wLanIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402389: fltTcaIsisIsisLanStats1moLanIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402390: fltTcaIsisIsisLanStats1qtrLanIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402391: fltTcaIsisIsisLanStats1yearLanIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402392: fltTcaIsisIsisLanStats5minLanIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402393: fltTcaIsisIsisLanStats15minLanIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402394: fltTcaIsisIsisLanStats1hLanIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402395: fltTcaIsisIsisLanStats1dLanIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402396: fltTcaIsisIsisLanStats1wLanIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402397: fltTcaIsisIsisLanStats1moLanIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402398: fltTcaIsisIsisLanStats1qtrLanIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402399: fltTcaIsisIsisLanStats1yearLanIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4024: fltHcloudDiscVendorCInstOperDiscVendorCInstOperStateDown
Severity: major
Explanation: This fault occurs when 3rd party FW and LB VM has issue.
Recommended Action: None set.
F402472: fltTcaIsisIsisLanStats5minLanIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402473: fltTcaIsisIsisLanStats15minLanIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402474: fltTcaIsisIsisLanStats1hLanIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402475: fltTcaIsisIsisLanStats1dLanIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402476: fltTcaIsisIsisLanStats1wLanIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402477: fltTcaIsisIsisLanStats1moLanIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402478: fltTcaIsisIsisLanStats1qtrLanIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402479: fltTcaIsisIsisLanStats1yearLanIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402488: fltTcaIsisIsisLanStats5minLanIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402489: fltTcaIsisIsisLanStats15minLanIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402490: fltTcaIsisIsisLanStats1hLanIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402491: fltTcaIsisIsisLanStats1dLanIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402492: fltTcaIsisIsisLanStats1wLanIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402493: fltTcaIsisIsisLanStats1moLanIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402494: fltTcaIsisIsisLanStats1qtrLanIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402495: fltTcaIsisIsisLanStats1yearLanIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402496: fltTcaIsisIsisLanStats5minLanIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402497: fltTcaIsisIsisLanStats15minLanIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402498: fltTcaIsisIsisLanStats1hLanIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402499: fltTcaIsisIsisLanStats1dLanIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4025: fltHcloudDiscEpOperDiscEpOperStateDown
Severity: major
Explanation: This fault occurs when 3rd party FW and LB NIC has issue.
Recommended Action: None set.
F402500: fltTcaIsisIsisLanStats1wLanIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402501: fltTcaIsisIsisLanStats1moLanIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402502: fltTcaIsisIsisLanStats1qtrLanIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402503: fltTcaIsisIsisLanStats1yearLanIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402504: fltTcaIsisIsisLanStats5minLanIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402505: fltTcaIsisIsisLanStats15minLanIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402506: fltTcaIsisIsisLanStats1hLanIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402507: fltTcaIsisIsisLanStats1dLanIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402508: fltTcaIsisIsisLanStats1wLanIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402509: fltTcaIsisIsisLanStats1moLanIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402510: fltTcaIsisIsisLanStats1qtrLanIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402511: fltTcaIsisIsisLanStats1yearLanIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402512: fltTcaIsisIsisLanStats5minLanIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402513: fltTcaIsisIsisLanStats15minLanIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402514: fltTcaIsisIsisLanStats1hLanIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402515: fltTcaIsisIsisLanStats1dLanIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402516: fltTcaIsisIsisLanStats1wLanIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402517: fltTcaIsisIsisLanStats1moLanIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402518: fltTcaIsisIsisLanStats1qtrLanIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402519: fltTcaIsisIsisLanStats1yearLanIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402520: fltTcaIsisIsisLanStats5minLanIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402521: fltTcaIsisIsisLanStats15minLanIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402522: fltTcaIsisIsisLanStats1hLanIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402523: fltTcaIsisIsisLanStats1dLanIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402524: fltTcaIsisIsisLanStats1wLanIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402525: fltTcaIsisIsisLanStats1moLanIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402526: fltTcaIsisIsisLanStats1qtrLanIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402527: fltTcaIsisIsisLanStats1yearLanIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402552: fltTcaIsisIsisLanStats5minLanIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402553: fltTcaIsisIsisLanStats15minLanIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402554: fltTcaIsisIsisLanStats1hLanIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402555: fltTcaIsisIsisLanStats1dLanIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402556: fltTcaIsisIsisLanStats1wLanIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402557: fltTcaIsisIsisLanStats1moLanIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402558: fltTcaIsisIsisLanStats1qtrLanIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402559: fltTcaIsisIsisLanStats1yearLanIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402560: fltTcaIsisIsisLanStats5minLanIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402561: fltTcaIsisIsisLanStats15minLanIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402562: fltTcaIsisIsisLanStats1hLanIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402563: fltTcaIsisIsisLanStats1dLanIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402564: fltTcaIsisIsisLanStats1wLanIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402565: fltTcaIsisIsisLanStats1moLanIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402566: fltTcaIsisIsisLanStats1qtrLanIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402567: fltTcaIsisIsisLanStats1yearLanIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4026: fltCloudRsExtCtxProfileToCtxResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F402640: fltTcaIsisIsisLanStats5minLanIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402641: fltTcaIsisIsisLanStats15minLanIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402642: fltTcaIsisIsisLanStats1hLanIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402643: fltTcaIsisIsisLanStats1dLanIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402644: fltTcaIsisIsisLanStats1wLanIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402645: fltTcaIsisIsisLanStats1moLanIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402646: fltTcaIsisIsisLanStats1qtrLanIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402647: fltTcaIsisIsisLanStats1yearLanIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402656: fltTcaIsisIsisLanStats5minLanIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402657: fltTcaIsisIsisLanStats15minLanIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402658: fltTcaIsisIsisLanStats1hLanIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402659: fltTcaIsisIsisLanStats1dLanIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402660: fltTcaIsisIsisLanStats1wLanIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402661: fltTcaIsisIsisLanStats1moLanIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402662: fltTcaIsisIsisLanStats1qtrLanIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402663: fltTcaIsisIsisLanStats1yearLanIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402664: fltTcaIsisIsisLanStats5minLanIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402665: fltTcaIsisIsisLanStats15minLanIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402666: fltTcaIsisIsisLanStats1hLanIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402667: fltTcaIsisIsisLanStats1dLanIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402668: fltTcaIsisIsisLanStats1wLanIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402669: fltTcaIsisIsisLanStats1moLanIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402670: fltTcaIsisIsisLanStats1qtrLanIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402671: fltTcaIsisIsisLanStats1yearLanIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402672: fltTcaIsisIsisLanStats5minLanIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402673: fltTcaIsisIsisLanStats15minLanIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402674: fltTcaIsisIsisLanStats1hLanIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402675: fltTcaIsisIsisLanStats1dLanIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402676: fltTcaIsisIsisLanStats1wLanIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402677: fltTcaIsisIsisLanStats1moLanIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402678: fltTcaIsisIsisLanStats1qtrLanIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402679: fltTcaIsisIsisLanStats1yearLanIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402680: fltTcaIsisIsisLanStats5minLanIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402681: fltTcaIsisIsisLanStats15minLanIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402682: fltTcaIsisIsisLanStats1hLanIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402683: fltTcaIsisIsisLanStats1dLanIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402684: fltTcaIsisIsisLanStats1wLanIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402685: fltTcaIsisIsisLanStats1moLanIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402686: fltTcaIsisIsisLanStats1qtrLanIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402687: fltTcaIsisIsisLanStats1yearLanIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402688: fltTcaIsisIsisLanStats5minLanIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402689: fltTcaIsisIsisLanStats15minLanIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402690: fltTcaIsisIsisLanStats1hLanIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402691: fltTcaIsisIsisLanStats1dLanIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402692: fltTcaIsisIsisLanStats1wLanIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402693: fltTcaIsisIsisLanStats1moLanIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402694: fltTcaIsisIsisLanStats1qtrLanIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402695: fltTcaIsisIsisLanStats1yearLanIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4027: fltCloudRsExtCtxProfileToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F402720: fltTcaIsisIsisLanStats5minLanIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402721: fltTcaIsisIsisLanStats15minLanIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402722: fltTcaIsisIsisLanStats1hLanIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402723: fltTcaIsisIsisLanStats1dLanIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402724: fltTcaIsisIsisLanStats1wLanIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402725: fltTcaIsisIsisLanStats1moLanIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402726: fltTcaIsisIsisLanStats1qtrLanIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402727: fltTcaIsisIsisLanStats1yearLanIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402728: fltTcaIsisIsisLanStats5minLanIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402729: fltTcaIsisIsisLanStats15minLanIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402730: fltTcaIsisIsisLanStats1hLanIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402731: fltTcaIsisIsisLanStats1dLanIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402732: fltTcaIsisIsisLanStats1wLanIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402733: fltTcaIsisIsisLanStats1moLanIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402734: fltTcaIsisIsisLanStats1qtrLanIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402735: fltTcaIsisIsisLanStats1yearLanIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "LAN IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LAN IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402808: fltTcaIsisIsisLspErrStats5minLspPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402809: fltTcaIsisIsisLspErrStats15minLspPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402810: fltTcaIsisIsisLspErrStats1hLspPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402811: fltTcaIsisIsisLspErrStats1dLspPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402812: fltTcaIsisIsisLspErrStats1wLspPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402813: fltTcaIsisIsisLspErrStats1moLspPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402814: fltTcaIsisIsisLspErrStats1qtrLspPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402815: fltTcaIsisIsisLspErrStats1yearLspPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402824: fltTcaIsisIsisLspErrStats5minLspPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402825: fltTcaIsisIsisLspErrStats15minLspPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402826: fltTcaIsisIsisLspErrStats1hLspPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402827: fltTcaIsisIsisLspErrStats1dLspPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402828: fltTcaIsisIsisLspErrStats1wLspPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402829: fltTcaIsisIsisLspErrStats1moLspPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402830: fltTcaIsisIsisLspErrStats1qtrLspPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402831: fltTcaIsisIsisLspErrStats1yearLspPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402832: fltTcaIsisIsisLspErrStats5minLspPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402833: fltTcaIsisIsisLspErrStats15minLspPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402834: fltTcaIsisIsisLspErrStats1hLspPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402835: fltTcaIsisIsisLspErrStats1dLspPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402836: fltTcaIsisIsisLspErrStats1wLspPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402837: fltTcaIsisIsisLspErrStats1moLspPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402838: fltTcaIsisIsisLspErrStats1qtrLspPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402839: fltTcaIsisIsisLspErrStats1yearLspPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402840: fltTcaIsisIsisLspErrStats5minLspPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402841: fltTcaIsisIsisLspErrStats15minLspPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402842: fltTcaIsisIsisLspErrStats1hLspPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402843: fltTcaIsisIsisLspErrStats1dLspPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402844: fltTcaIsisIsisLspErrStats1wLspPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402845: fltTcaIsisIsisLspErrStats1moLspPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402846: fltTcaIsisIsisLspErrStats1qtrLspPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402847: fltTcaIsisIsisLspErrStats1yearLspPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402848: fltTcaIsisIsisLspErrStats5minLspPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402849: fltTcaIsisIsisLspErrStats15minLspPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402850: fltTcaIsisIsisLspErrStats1hLspPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402851: fltTcaIsisIsisLspErrStats1dLspPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402852: fltTcaIsisIsisLspErrStats1wLspPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402853: fltTcaIsisIsisLspErrStats1moLspPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402854: fltTcaIsisIsisLspErrStats1qtrLspPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402855: fltTcaIsisIsisLspErrStats1yearLspPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402856: fltTcaIsisIsisLspErrStats5minLspPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402857: fltTcaIsisIsisLspErrStats15minLspPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402858: fltTcaIsisIsisLspErrStats1hLspPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402859: fltTcaIsisIsisLspErrStats1dLspPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402860: fltTcaIsisIsisLspErrStats1wLspPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402861: fltTcaIsisIsisLspErrStats1moLspPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402862: fltTcaIsisIsisLspErrStats1qtrLspPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402863: fltTcaIsisIsisLspErrStats1yearLspPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402888: fltTcaIsisIsisLspErrStats5minLspPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402889: fltTcaIsisIsisLspErrStats15minLspPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402890: fltTcaIsisIsisLspErrStats1hLspPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402891: fltTcaIsisIsisLspErrStats1dLspPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402892: fltTcaIsisIsisLspErrStats1wLspPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402893: fltTcaIsisIsisLspErrStats1moLspPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402894: fltTcaIsisIsisLspErrStats1qtrLspPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402895: fltTcaIsisIsisLspErrStats1yearLspPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402896: fltTcaIsisIsisLspErrStats5minLspPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402897: fltTcaIsisIsisLspErrStats15minLspPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402898: fltTcaIsisIsisLspErrStats1hLspPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402899: fltTcaIsisIsisLspErrStats1dLspPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402900: fltTcaIsisIsisLspErrStats1wLspPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402901: fltTcaIsisIsisLspErrStats1moLspPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402902: fltTcaIsisIsisLspErrStats1qtrLspPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402903: fltTcaIsisIsisLspErrStats1yearLspPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402976: fltTcaIsisIsisLspErrStats5minLspPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402977: fltTcaIsisIsisLspErrStats15minLspPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402978: fltTcaIsisIsisLspErrStats1hLspPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402979: fltTcaIsisIsisLspErrStats1dLspPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402980: fltTcaIsisIsisLspErrStats1wLspPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402981: fltTcaIsisIsisLspErrStats1moLspPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402982: fltTcaIsisIsisLspErrStats1qtrLspPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402983: fltTcaIsisIsisLspErrStats1yearLspPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402992: fltTcaIsisIsisLspErrStats5minLspPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402993: fltTcaIsisIsisLspErrStats15minLspPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402994: fltTcaIsisIsisLspErrStats1hLspPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402995: fltTcaIsisIsisLspErrStats1dLspPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402996: fltTcaIsisIsisLspErrStats1wLspPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402997: fltTcaIsisIsisLspErrStats1moLspPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402998: fltTcaIsisIsisLspErrStats1qtrLspPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F402999: fltTcaIsisIsisLspErrStats1yearLspPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403000: fltTcaIsisIsisLspErrStats5minLspPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403001: fltTcaIsisIsisLspErrStats15minLspPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403002: fltTcaIsisIsisLspErrStats1hLspPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403003: fltTcaIsisIsisLspErrStats1dLspPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403004: fltTcaIsisIsisLspErrStats1wLspPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403005: fltTcaIsisIsisLspErrStats1moLspPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403006: fltTcaIsisIsisLspErrStats1qtrLspPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403007: fltTcaIsisIsisLspErrStats1yearLspPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403008: fltTcaIsisIsisLspErrStats5minLspPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403009: fltTcaIsisIsisLspErrStats15minLspPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403010: fltTcaIsisIsisLspErrStats1hLspPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403011: fltTcaIsisIsisLspErrStats1dLspPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403012: fltTcaIsisIsisLspErrStats1wLspPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403013: fltTcaIsisIsisLspErrStats1moLspPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403014: fltTcaIsisIsisLspErrStats1qtrLspPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403015: fltTcaIsisIsisLspErrStats1yearLspPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403016: fltTcaIsisIsisLspErrStats5minLspPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403017: fltTcaIsisIsisLspErrStats15minLspPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403018: fltTcaIsisIsisLspErrStats1hLspPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403019: fltTcaIsisIsisLspErrStats1dLspPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403020: fltTcaIsisIsisLspErrStats1wLspPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403021: fltTcaIsisIsisLspErrStats1moLspPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403022: fltTcaIsisIsisLspErrStats1qtrLspPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403023: fltTcaIsisIsisLspErrStats1yearLspPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403024: fltTcaIsisIsisLspErrStats5minLspPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403025: fltTcaIsisIsisLspErrStats15minLspPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403026: fltTcaIsisIsisLspErrStats1hLspPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403027: fltTcaIsisIsisLspErrStats1dLspPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403028: fltTcaIsisIsisLspErrStats1wLspPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403029: fltTcaIsisIsisLspErrStats1moLspPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403030: fltTcaIsisIsisLspErrStats1qtrLspPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403031: fltTcaIsisIsisLspErrStats1yearLspPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403056: fltTcaIsisIsisLspErrStats5minLspPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403057: fltTcaIsisIsisLspErrStats15minLspPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403058: fltTcaIsisIsisLspErrStats1hLspPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403059: fltTcaIsisIsisLspErrStats1dLspPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403060: fltTcaIsisIsisLspErrStats1wLspPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403061: fltTcaIsisIsisLspErrStats1moLspPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403062: fltTcaIsisIsisLspErrStats1qtrLspPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403063: fltTcaIsisIsisLspErrStats1yearLspPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403064: fltTcaIsisIsisLspErrStats5minLspPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403065: fltTcaIsisIsisLspErrStats15minLspPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403066: fltTcaIsisIsisLspErrStats1hLspPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403067: fltTcaIsisIsisLspErrStats1dLspPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403068: fltTcaIsisIsisLspErrStats1wLspPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403069: fltTcaIsisIsisLspErrStats1moLspPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403070: fltTcaIsisIsisLspErrStats1qtrLspPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403071: fltTcaIsisIsisLspErrStats1yearLspPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "LSP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403144: fltTcaIsisIsisLspStats5minFastLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403145: fltTcaIsisIsisLspStats15minFastLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403146: fltTcaIsisIsisLspStats1hFastLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403147: fltTcaIsisIsisLspStats1dFastLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403148: fltTcaIsisIsisLspStats1wFastLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403149: fltTcaIsisIsisLspStats1moFastLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403150: fltTcaIsisIsisLspStats1qtrFastLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403151: fltTcaIsisIsisLspStats1yearFastLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403160: fltTcaIsisIsisLspStats5minFastLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403161: fltTcaIsisIsisLspStats15minFastLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403162: fltTcaIsisIsisLspStats1hFastLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403163: fltTcaIsisIsisLspStats1dFastLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403164: fltTcaIsisIsisLspStats1wFastLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403165: fltTcaIsisIsisLspStats1moFastLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403166: fltTcaIsisIsisLspStats1qtrFastLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403167: fltTcaIsisIsisLspStats1yearFastLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403168: fltTcaIsisIsisLspStats5minFastLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403169: fltTcaIsisIsisLspStats15minFastLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403170: fltTcaIsisIsisLspStats1hFastLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403171: fltTcaIsisIsisLspStats1dFastLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403172: fltTcaIsisIsisLspStats1wFastLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403173: fltTcaIsisIsisLspStats1moFastLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403174: fltTcaIsisIsisLspStats1qtrFastLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403175: fltTcaIsisIsisLspStats1yearFastLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403176: fltTcaIsisIsisLspStats5minFastLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403177: fltTcaIsisIsisLspStats15minFastLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403178: fltTcaIsisIsisLspStats1hFastLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403179: fltTcaIsisIsisLspStats1dFastLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403180: fltTcaIsisIsisLspStats1wFastLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403181: fltTcaIsisIsisLspStats1moFastLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403182: fltTcaIsisIsisLspStats1qtrFastLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403183: fltTcaIsisIsisLspStats1yearFastLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403184: fltTcaIsisIsisLspStats5minFastLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403185: fltTcaIsisIsisLspStats15minFastLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403186: fltTcaIsisIsisLspStats1hFastLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403187: fltTcaIsisIsisLspStats1dFastLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403188: fltTcaIsisIsisLspStats1wFastLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403189: fltTcaIsisIsisLspStats1moFastLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403190: fltTcaIsisIsisLspStats1qtrFastLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403191: fltTcaIsisIsisLspStats1yearFastLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403192: fltTcaIsisIsisLspStats5minFastLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403193: fltTcaIsisIsisLspStats15minFastLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403194: fltTcaIsisIsisLspStats1hFastLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403195: fltTcaIsisIsisLspStats1dFastLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403196: fltTcaIsisIsisLspStats1wFastLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403197: fltTcaIsisIsisLspStats1moFastLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403198: fltTcaIsisIsisLspStats1qtrFastLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403199: fltTcaIsisIsisLspStats1yearFastLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403224: fltTcaIsisIsisLspStats5minFastLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403225: fltTcaIsisIsisLspStats15minFastLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403226: fltTcaIsisIsisLspStats1hFastLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403227: fltTcaIsisIsisLspStats1dFastLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403228: fltTcaIsisIsisLspStats1wFastLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403229: fltTcaIsisIsisLspStats1moFastLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403230: fltTcaIsisIsisLspStats1qtrFastLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403231: fltTcaIsisIsisLspStats1yearFastLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403232: fltTcaIsisIsisLspStats5minFastLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403233: fltTcaIsisIsisLspStats15minFastLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403234: fltTcaIsisIsisLspStats1hFastLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403235: fltTcaIsisIsisLspStats1dFastLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403236: fltTcaIsisIsisLspStats1wFastLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403237: fltTcaIsisIsisLspStats1moFastLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403238: fltTcaIsisIsisLspStats1qtrFastLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403239: fltTcaIsisIsisLspStats1yearFastLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "Fast LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Fast LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403312: fltTcaIsisIsisLspStats5minLspPktsRetxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403313: fltTcaIsisIsisLspStats15minLspPktsRetxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403314: fltTcaIsisIsisLspStats1hLspPktsRetxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403315: fltTcaIsisIsisLspStats1dLspPktsRetxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403316: fltTcaIsisIsisLspStats1wLspPktsRetxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403317: fltTcaIsisIsisLspStats1moLspPktsRetxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403318: fltTcaIsisIsisLspStats1qtrLspPktsRetxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403319: fltTcaIsisIsisLspStats1yearLspPktsRetxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403328: fltTcaIsisIsisLspStats5minLspPktsRetxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403329: fltTcaIsisIsisLspStats15minLspPktsRetxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403330: fltTcaIsisIsisLspStats1hLspPktsRetxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403331: fltTcaIsisIsisLspStats1dLspPktsRetxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403332: fltTcaIsisIsisLspStats1wLspPktsRetxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403333: fltTcaIsisIsisLspStats1moLspPktsRetxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403334: fltTcaIsisIsisLspStats1qtrLspPktsRetxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403335: fltTcaIsisIsisLspStats1yearLspPktsRetxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403336: fltTcaIsisIsisLspStats5minLspPktsRetxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403337: fltTcaIsisIsisLspStats15minLspPktsRetxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403338: fltTcaIsisIsisLspStats1hLspPktsRetxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403339: fltTcaIsisIsisLspStats1dLspPktsRetxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403340: fltTcaIsisIsisLspStats1wLspPktsRetxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403341: fltTcaIsisIsisLspStats1moLspPktsRetxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403342: fltTcaIsisIsisLspStats1qtrLspPktsRetxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403343: fltTcaIsisIsisLspStats1yearLspPktsRetxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403344: fltTcaIsisIsisLspStats5minLspPktsRetxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403345: fltTcaIsisIsisLspStats15minLspPktsRetxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403346: fltTcaIsisIsisLspStats1hLspPktsRetxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403347: fltTcaIsisIsisLspStats1dLspPktsRetxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403348: fltTcaIsisIsisLspStats1wLspPktsRetxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403349: fltTcaIsisIsisLspStats1moLspPktsRetxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403350: fltTcaIsisIsisLspStats1qtrLspPktsRetxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403351: fltTcaIsisIsisLspStats1yearLspPktsRetxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403352: fltTcaIsisIsisLspStats5minLspPktsRetxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403353: fltTcaIsisIsisLspStats15minLspPktsRetxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403354: fltTcaIsisIsisLspStats1hLspPktsRetxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403355: fltTcaIsisIsisLspStats1dLspPktsRetxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403356: fltTcaIsisIsisLspStats1wLspPktsRetxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403357: fltTcaIsisIsisLspStats1moLspPktsRetxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403358: fltTcaIsisIsisLspStats1qtrLspPktsRetxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403359: fltTcaIsisIsisLspStats1yearLspPktsRetxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403360: fltTcaIsisIsisLspStats5minLspPktsRetxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403361: fltTcaIsisIsisLspStats15minLspPktsRetxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403362: fltTcaIsisIsisLspStats1hLspPktsRetxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403363: fltTcaIsisIsisLspStats1dLspPktsRetxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403364: fltTcaIsisIsisLspStats1wLspPktsRetxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403365: fltTcaIsisIsisLspStats1moLspPktsRetxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403366: fltTcaIsisIsisLspStats1qtrLspPktsRetxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403367: fltTcaIsisIsisLspStats1yearLspPktsRetxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403392: fltTcaIsisIsisLspStats5minLspPktsRetxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403393: fltTcaIsisIsisLspStats15minLspPktsRetxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403394: fltTcaIsisIsisLspStats1hLspPktsRetxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403395: fltTcaIsisIsisLspStats1dLspPktsRetxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403396: fltTcaIsisIsisLspStats1wLspPktsRetxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403397: fltTcaIsisIsisLspStats1moLspPktsRetxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403398: fltTcaIsisIsisLspStats1qtrLspPktsRetxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403399: fltTcaIsisIsisLspStats1yearLspPktsRetxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4034: fltHcloudRsSvcResToSvcEPgResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F403400: fltTcaIsisIsisLspStats5minLspPktsRetxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403401: fltTcaIsisIsisLspStats15minLspPktsRetxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403402: fltTcaIsisIsisLspStats1hLspPktsRetxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403403: fltTcaIsisIsisLspStats1dLspPktsRetxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403404: fltTcaIsisIsisLspStats1wLspPktsRetxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403405: fltTcaIsisIsisLspStats1moLspPktsRetxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403406: fltTcaIsisIsisLspStats1qtrLspPktsRetxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403407: fltTcaIsisIsisLspStats1yearLspPktsRetxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Retransmitted rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Retransmitted" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403480: fltTcaIsisIsisLspStats5minLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403481: fltTcaIsisIsisLspStats15minLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403482: fltTcaIsisIsisLspStats1hLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403483: fltTcaIsisIsisLspStats1dLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403484: fltTcaIsisIsisLspStats1wLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403485: fltTcaIsisIsisLspStats1moLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403486: fltTcaIsisIsisLspStats1qtrLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403487: fltTcaIsisIsisLspStats1yearLspPktsRxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403496: fltTcaIsisIsisLspStats5minLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403497: fltTcaIsisIsisLspStats15minLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403498: fltTcaIsisIsisLspStats1hLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403499: fltTcaIsisIsisLspStats1dLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4035: fltHcloudRsEpToPrivateEpResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F403500: fltTcaIsisIsisLspStats1wLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403501: fltTcaIsisIsisLspStats1moLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403502: fltTcaIsisIsisLspStats1qtrLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403503: fltTcaIsisIsisLspStats1yearLspPktsRxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403504: fltTcaIsisIsisLspStats5minLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403505: fltTcaIsisIsisLspStats15minLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403506: fltTcaIsisIsisLspStats1hLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403507: fltTcaIsisIsisLspStats1dLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403508: fltTcaIsisIsisLspStats1wLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403509: fltTcaIsisIsisLspStats1moLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403510: fltTcaIsisIsisLspStats1qtrLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403511: fltTcaIsisIsisLspStats1yearLspPktsRxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403512: fltTcaIsisIsisLspStats5minLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403513: fltTcaIsisIsisLspStats15minLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403514: fltTcaIsisIsisLspStats1hLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403515: fltTcaIsisIsisLspStats1dLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403516: fltTcaIsisIsisLspStats1wLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403517: fltTcaIsisIsisLspStats1moLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403518: fltTcaIsisIsisLspStats1qtrLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403519: fltTcaIsisIsisLspStats1yearLspPktsRxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403520: fltTcaIsisIsisLspStats5minLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403521: fltTcaIsisIsisLspStats15minLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403522: fltTcaIsisIsisLspStats1hLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403523: fltTcaIsisIsisLspStats1dLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403524: fltTcaIsisIsisLspStats1wLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403525: fltTcaIsisIsisLspStats1moLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403526: fltTcaIsisIsisLspStats1qtrLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403527: fltTcaIsisIsisLspStats1yearLspPktsRxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403528: fltTcaIsisIsisLspStats5minLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403529: fltTcaIsisIsisLspStats15minLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403530: fltTcaIsisIsisLspStats1hLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403531: fltTcaIsisIsisLspStats1dLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403532: fltTcaIsisIsisLspStats1wLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403533: fltTcaIsisIsisLspStats1moLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403534: fltTcaIsisIsisLspStats1qtrLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403535: fltTcaIsisIsisLspStats1yearLspPktsRxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403560: fltTcaIsisIsisLspStats5minLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403561: fltTcaIsisIsisLspStats15minLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403562: fltTcaIsisIsisLspStats1hLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403563: fltTcaIsisIsisLspStats1dLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403564: fltTcaIsisIsisLspStats1wLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403565: fltTcaIsisIsisLspStats1moLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403566: fltTcaIsisIsisLspStats1qtrLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403567: fltTcaIsisIsisLspStats1yearLspPktsRxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403568: fltTcaIsisIsisLspStats5minLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403569: fltTcaIsisIsisLspStats15minLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403570: fltTcaIsisIsisLspStats1hLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403571: fltTcaIsisIsisLspStats1dLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403572: fltTcaIsisIsisLspStats1wLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403573: fltTcaIsisIsisLspStats1moLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403574: fltTcaIsisIsisLspStats1qtrLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403575: fltTcaIsisIsisLspStats1yearLspPktsRxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403648: fltTcaIsisIsisLspStats5minLspPktsTxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403649: fltTcaIsisIsisLspStats15minLspPktsTxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403650: fltTcaIsisIsisLspStats1hLspPktsTxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403651: fltTcaIsisIsisLspStats1dLspPktsTxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403652: fltTcaIsisIsisLspStats1wLspPktsTxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403653: fltTcaIsisIsisLspStats1moLspPktsTxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403654: fltTcaIsisIsisLspStats1qtrLspPktsTxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403655: fltTcaIsisIsisLspStats1yearLspPktsTxLast
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403664: fltTcaIsisIsisLspStats5minLspPktsTxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403665: fltTcaIsisIsisLspStats15minLspPktsTxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403666: fltTcaIsisIsisLspStats1hLspPktsTxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403667: fltTcaIsisIsisLspStats1dLspPktsTxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403668: fltTcaIsisIsisLspStats1wLspPktsTxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403669: fltTcaIsisIsisLspStats1moLspPktsTxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403670: fltTcaIsisIsisLspStats1qtrLspPktsTxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403671: fltTcaIsisIsisLspStats1yearLspPktsTxCum
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403672: fltTcaIsisIsisLspStats5minLspPktsTxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403673: fltTcaIsisIsisLspStats15minLspPktsTxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403674: fltTcaIsisIsisLspStats1hLspPktsTxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403675: fltTcaIsisIsisLspStats1dLspPktsTxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403676: fltTcaIsisIsisLspStats1wLspPktsTxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403677: fltTcaIsisIsisLspStats1moLspPktsTxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403678: fltTcaIsisIsisLspStats1qtrLspPktsTxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403679: fltTcaIsisIsisLspStats1yearLspPktsTxPer
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403680: fltTcaIsisIsisLspStats5minLspPktsTxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403681: fltTcaIsisIsisLspStats15minLspPktsTxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403682: fltTcaIsisIsisLspStats1hLspPktsTxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403683: fltTcaIsisIsisLspStats1dLspPktsTxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403684: fltTcaIsisIsisLspStats1wLspPktsTxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403685: fltTcaIsisIsisLspStats1moLspPktsTxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403686: fltTcaIsisIsisLspStats1qtrLspPktsTxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403687: fltTcaIsisIsisLspStats1yearLspPktsTxMin
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403688: fltTcaIsisIsisLspStats5minLspPktsTxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403689: fltTcaIsisIsisLspStats15minLspPktsTxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403690: fltTcaIsisIsisLspStats1hLspPktsTxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403691: fltTcaIsisIsisLspStats1dLspPktsTxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403692: fltTcaIsisIsisLspStats1wLspPktsTxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403693: fltTcaIsisIsisLspStats1moLspPktsTxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403694: fltTcaIsisIsisLspStats1qtrLspPktsTxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403695: fltTcaIsisIsisLspStats1yearLspPktsTxMax
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403696: fltTcaIsisIsisLspStats5minLspPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403697: fltTcaIsisIsisLspStats15minLspPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403698: fltTcaIsisIsisLspStats1hLspPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403699: fltTcaIsisIsisLspStats1dLspPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4037: fltHcloudRsNetworkSecurityGroupToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F403700: fltTcaIsisIsisLspStats1wLspPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403701: fltTcaIsisIsisLspStats1moLspPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403702: fltTcaIsisIsisLspStats1qtrLspPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403703: fltTcaIsisIsisLspStats1yearLspPktsTxAvg
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403728: fltTcaIsisIsisLspStats5minLspPktsTxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403729: fltTcaIsisIsisLspStats15minLspPktsTxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403730: fltTcaIsisIsisLspStats1hLspPktsTxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403731: fltTcaIsisIsisLspStats1dLspPktsTxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403732: fltTcaIsisIsisLspStats1wLspPktsTxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403733: fltTcaIsisIsisLspStats1moLspPktsTxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403734: fltTcaIsisIsisLspStats1qtrLspPktsTxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403735: fltTcaIsisIsisLspStats1yearLspPktsTxTr
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403736: fltTcaIsisIsisLspStats5minLspPktsTxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403737: fltTcaIsisIsisLspStats15minLspPktsTxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403738: fltTcaIsisIsisLspStats1hLspPktsTxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403739: fltTcaIsisIsisLspStats1dLspPktsTxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403740: fltTcaIsisIsisLspStats1wLspPktsTxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403741: fltTcaIsisIsisLspStats1moLspPktsTxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403742: fltTcaIsisIsisLspStats1qtrLspPktsTxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403743: fltTcaIsisIsisLspStats1yearLspPktsTxRate
Severity: variable
Explanation: This fault is caused by "LSP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "LSP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4038: fltHcloudRsServiceepToSvcEPgResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F403816: fltTcaIsisIsisP2pStats5minP2pIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403817: fltTcaIsisIsisP2pStats15minP2pIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403818: fltTcaIsisIsisP2pStats1hP2pIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403819: fltTcaIsisIsisP2pStats1dP2pIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403820: fltTcaIsisIsisP2pStats1wP2pIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403821: fltTcaIsisIsisP2pStats1moP2pIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403822: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403823: fltTcaIsisIsisP2pStats1yearP2pIIHPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403832: fltTcaIsisIsisP2pStats5minP2pIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403833: fltTcaIsisIsisP2pStats15minP2pIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403834: fltTcaIsisIsisP2pStats1hP2pIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403835: fltTcaIsisIsisP2pStats1dP2pIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403836: fltTcaIsisIsisP2pStats1wP2pIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403837: fltTcaIsisIsisP2pStats1moP2pIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403838: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403839: fltTcaIsisIsisP2pStats1yearP2pIIHPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403840: fltTcaIsisIsisP2pStats5minP2pIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403841: fltTcaIsisIsisP2pStats15minP2pIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403842: fltTcaIsisIsisP2pStats1hP2pIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403843: fltTcaIsisIsisP2pStats1dP2pIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403844: fltTcaIsisIsisP2pStats1wP2pIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403845: fltTcaIsisIsisP2pStats1moP2pIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403846: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403847: fltTcaIsisIsisP2pStats1yearP2pIIHPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403848: fltTcaIsisIsisP2pStats5minP2pIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403849: fltTcaIsisIsisP2pStats15minP2pIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403850: fltTcaIsisIsisP2pStats1hP2pIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403851: fltTcaIsisIsisP2pStats1dP2pIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403852: fltTcaIsisIsisP2pStats1wP2pIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403853: fltTcaIsisIsisP2pStats1moP2pIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403854: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403855: fltTcaIsisIsisP2pStats1yearP2pIIHPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403856: fltTcaIsisIsisP2pStats5minP2pIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403857: fltTcaIsisIsisP2pStats15minP2pIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403858: fltTcaIsisIsisP2pStats1hP2pIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403859: fltTcaIsisIsisP2pStats1dP2pIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403860: fltTcaIsisIsisP2pStats1wP2pIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403861: fltTcaIsisIsisP2pStats1moP2pIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403862: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403863: fltTcaIsisIsisP2pStats1yearP2pIIHPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403864: fltTcaIsisIsisP2pStats5minP2pIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403865: fltTcaIsisIsisP2pStats15minP2pIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403866: fltTcaIsisIsisP2pStats1hP2pIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403867: fltTcaIsisIsisP2pStats1dP2pIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403868: fltTcaIsisIsisP2pStats1wP2pIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403869: fltTcaIsisIsisP2pStats1moP2pIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403870: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403871: fltTcaIsisIsisP2pStats1yearP2pIIHPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403896: fltTcaIsisIsisP2pStats5minP2pIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403897: fltTcaIsisIsisP2pStats15minP2pIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403898: fltTcaIsisIsisP2pStats1hP2pIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403899: fltTcaIsisIsisP2pStats1dP2pIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4039: fltHcloudRsSubnetToAppSecurityGroupResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F403900: fltTcaIsisIsisP2pStats1wP2pIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403901: fltTcaIsisIsisP2pStats1moP2pIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403902: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403903: fltTcaIsisIsisP2pStats1yearP2pIIHPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403904: fltTcaIsisIsisP2pStats5minP2pIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403905: fltTcaIsisIsisP2pStats15minP2pIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403906: fltTcaIsisIsisP2pStats1hP2pIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403907: fltTcaIsisIsisP2pStats1dP2pIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403908: fltTcaIsisIsisP2pStats1wP2pIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403909: fltTcaIsisIsisP2pStats1moP2pIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403910: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403911: fltTcaIsisIsisP2pStats1yearP2pIIHPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403984: fltTcaIsisIsisP2pStats5minP2pIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403985: fltTcaIsisIsisP2pStats15minP2pIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403986: fltTcaIsisIsisP2pStats1hP2pIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403987: fltTcaIsisIsisP2pStats1dP2pIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403988: fltTcaIsisIsisP2pStats1wP2pIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403989: fltTcaIsisIsisP2pStats1moP2pIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403990: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F403991: fltTcaIsisIsisP2pStats1yearP2pIIHPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4040: fltHcloudRsSvcEPgToSgResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404000: fltTcaIsisIsisP2pStats5minP2pIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404001: fltTcaIsisIsisP2pStats15minP2pIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404002: fltTcaIsisIsisP2pStats1hP2pIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404003: fltTcaIsisIsisP2pStats1dP2pIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404004: fltTcaIsisIsisP2pStats1wP2pIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404005: fltTcaIsisIsisP2pStats1moP2pIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404006: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404007: fltTcaIsisIsisP2pStats1yearP2pIIHPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404008: fltTcaIsisIsisP2pStats5minP2pIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404009: fltTcaIsisIsisP2pStats15minP2pIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404010: fltTcaIsisIsisP2pStats1hP2pIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404011: fltTcaIsisIsisP2pStats1dP2pIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404012: fltTcaIsisIsisP2pStats1wP2pIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404013: fltTcaIsisIsisP2pStats1moP2pIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404014: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404015: fltTcaIsisIsisP2pStats1yearP2pIIHPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404016: fltTcaIsisIsisP2pStats5minP2pIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404017: fltTcaIsisIsisP2pStats15minP2pIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404018: fltTcaIsisIsisP2pStats1hP2pIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404019: fltTcaIsisIsisP2pStats1dP2pIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404020: fltTcaIsisIsisP2pStats1wP2pIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404021: fltTcaIsisIsisP2pStats1moP2pIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404022: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404023: fltTcaIsisIsisP2pStats1yearP2pIIHPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404024: fltTcaIsisIsisP2pStats5minP2pIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404025: fltTcaIsisIsisP2pStats15minP2pIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404026: fltTcaIsisIsisP2pStats1hP2pIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404027: fltTcaIsisIsisP2pStats1dP2pIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404028: fltTcaIsisIsisP2pStats1wP2pIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404029: fltTcaIsisIsisP2pStats1moP2pIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404030: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404031: fltTcaIsisIsisP2pStats1yearP2pIIHPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404032: fltTcaIsisIsisP2pStats5minP2pIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404033: fltTcaIsisIsisP2pStats15minP2pIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404034: fltTcaIsisIsisP2pStats1hP2pIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404035: fltTcaIsisIsisP2pStats1dP2pIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404036: fltTcaIsisIsisP2pStats1wP2pIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404037: fltTcaIsisIsisP2pStats1moP2pIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404038: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404039: fltTcaIsisIsisP2pStats1yearP2pIIHPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404064: fltTcaIsisIsisP2pStats5minP2pIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404065: fltTcaIsisIsisP2pStats15minP2pIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404066: fltTcaIsisIsisP2pStats1hP2pIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404067: fltTcaIsisIsisP2pStats1dP2pIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404068: fltTcaIsisIsisP2pStats1wP2pIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404069: fltTcaIsisIsisP2pStats1moP2pIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404070: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404071: fltTcaIsisIsisP2pStats1yearP2pIIHPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404072: fltTcaIsisIsisP2pStats5minP2pIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404073: fltTcaIsisIsisP2pStats15minP2pIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404074: fltTcaIsisIsisP2pStats1hP2pIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404075: fltTcaIsisIsisP2pStats1dP2pIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404076: fltTcaIsisIsisP2pStats1wP2pIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404077: fltTcaIsisIsisP2pStats1moP2pIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404078: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404079: fltTcaIsisIsisP2pStats1yearP2pIIHPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets with Miscellaneous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets with Miscellaneous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4041: fltHcloudRsSvcEPgToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404152: fltTcaIsisIsisP2pStats5minP2pIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404153: fltTcaIsisIsisP2pStats15minP2pIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404154: fltTcaIsisIsisP2pStats1hP2pIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404155: fltTcaIsisIsisP2pStats1dP2pIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404156: fltTcaIsisIsisP2pStats1wP2pIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404157: fltTcaIsisIsisP2pStats1moP2pIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404158: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404159: fltTcaIsisIsisP2pStats1yearP2pIIHPktsRxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404168: fltTcaIsisIsisP2pStats5minP2pIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404169: fltTcaIsisIsisP2pStats15minP2pIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404170: fltTcaIsisIsisP2pStats1hP2pIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404171: fltTcaIsisIsisP2pStats1dP2pIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404172: fltTcaIsisIsisP2pStats1wP2pIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404173: fltTcaIsisIsisP2pStats1moP2pIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404174: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404175: fltTcaIsisIsisP2pStats1yearP2pIIHPktsRxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404176: fltTcaIsisIsisP2pStats5minP2pIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404177: fltTcaIsisIsisP2pStats15minP2pIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404178: fltTcaIsisIsisP2pStats1hP2pIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404179: fltTcaIsisIsisP2pStats1dP2pIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404180: fltTcaIsisIsisP2pStats1wP2pIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404181: fltTcaIsisIsisP2pStats1moP2pIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404182: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404183: fltTcaIsisIsisP2pStats1yearP2pIIHPktsRxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404184: fltTcaIsisIsisP2pStats5minP2pIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404185: fltTcaIsisIsisP2pStats15minP2pIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404186: fltTcaIsisIsisP2pStats1hP2pIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404187: fltTcaIsisIsisP2pStats1dP2pIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404188: fltTcaIsisIsisP2pStats1wP2pIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404189: fltTcaIsisIsisP2pStats1moP2pIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404190: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404191: fltTcaIsisIsisP2pStats1yearP2pIIHPktsRxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404192: fltTcaIsisIsisP2pStats5minP2pIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404193: fltTcaIsisIsisP2pStats15minP2pIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404194: fltTcaIsisIsisP2pStats1hP2pIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404195: fltTcaIsisIsisP2pStats1dP2pIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404196: fltTcaIsisIsisP2pStats1wP2pIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404197: fltTcaIsisIsisP2pStats1moP2pIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404198: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404199: fltTcaIsisIsisP2pStats1yearP2pIIHPktsRxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4042: fltHinventoryRsApigwToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404200: fltTcaIsisIsisP2pStats5minP2pIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404201: fltTcaIsisIsisP2pStats15minP2pIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404202: fltTcaIsisIsisP2pStats1hP2pIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404203: fltTcaIsisIsisP2pStats1dP2pIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404204: fltTcaIsisIsisP2pStats1wP2pIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404205: fltTcaIsisIsisP2pStats1moP2pIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404206: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404207: fltTcaIsisIsisP2pStats1yearP2pIIHPktsRxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404232: fltTcaIsisIsisP2pStats5minP2pIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404233: fltTcaIsisIsisP2pStats15minP2pIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404234: fltTcaIsisIsisP2pStats1hP2pIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404235: fltTcaIsisIsisP2pStats1dP2pIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404236: fltTcaIsisIsisP2pStats1wP2pIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404237: fltTcaIsisIsisP2pStats1moP2pIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404238: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404239: fltTcaIsisIsisP2pStats1yearP2pIIHPktsRxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404240: fltTcaIsisIsisP2pStats5minP2pIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404241: fltTcaIsisIsisP2pStats15minP2pIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404242: fltTcaIsisIsisP2pStats1hP2pIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404243: fltTcaIsisIsisP2pStats1dP2pIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404244: fltTcaIsisIsisP2pStats1wP2pIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404245: fltTcaIsisIsisP2pStats1moP2pIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404246: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404247: fltTcaIsisIsisP2pStats1yearP2pIIHPktsRxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4043: fltHinventoryRsApimToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404320: fltTcaIsisIsisP2pStats5minP2pIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404321: fltTcaIsisIsisP2pStats15minP2pIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404322: fltTcaIsisIsisP2pStats1hP2pIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404323: fltTcaIsisIsisP2pStats1dP2pIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404324: fltTcaIsisIsisP2pStats1wP2pIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404325: fltTcaIsisIsisP2pStats1moP2pIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404326: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404327: fltTcaIsisIsisP2pStats1yearP2pIIHPktsTxLast
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404336: fltTcaIsisIsisP2pStats5minP2pIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404337: fltTcaIsisIsisP2pStats15minP2pIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404338: fltTcaIsisIsisP2pStats1hP2pIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404339: fltTcaIsisIsisP2pStats1dP2pIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404340: fltTcaIsisIsisP2pStats1wP2pIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404341: fltTcaIsisIsisP2pStats1moP2pIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404342: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404343: fltTcaIsisIsisP2pStats1yearP2pIIHPktsTxCum
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404344: fltTcaIsisIsisP2pStats5minP2pIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404345: fltTcaIsisIsisP2pStats15minP2pIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404346: fltTcaIsisIsisP2pStats1hP2pIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404347: fltTcaIsisIsisP2pStats1dP2pIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404348: fltTcaIsisIsisP2pStats1wP2pIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404349: fltTcaIsisIsisP2pStats1moP2pIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404350: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404351: fltTcaIsisIsisP2pStats1yearP2pIIHPktsTxPer
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404352: fltTcaIsisIsisP2pStats5minP2pIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404353: fltTcaIsisIsisP2pStats15minP2pIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404354: fltTcaIsisIsisP2pStats1hP2pIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404355: fltTcaIsisIsisP2pStats1dP2pIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404356: fltTcaIsisIsisP2pStats1wP2pIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404357: fltTcaIsisIsisP2pStats1moP2pIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404358: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404359: fltTcaIsisIsisP2pStats1yearP2pIIHPktsTxMin
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404360: fltTcaIsisIsisP2pStats5minP2pIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404361: fltTcaIsisIsisP2pStats15minP2pIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404362: fltTcaIsisIsisP2pStats1hP2pIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404363: fltTcaIsisIsisP2pStats1dP2pIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404364: fltTcaIsisIsisP2pStats1wP2pIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404365: fltTcaIsisIsisP2pStats1moP2pIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404366: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404367: fltTcaIsisIsisP2pStats1yearP2pIIHPktsTxMax
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404368: fltTcaIsisIsisP2pStats5minP2pIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404369: fltTcaIsisIsisP2pStats15minP2pIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404370: fltTcaIsisIsisP2pStats1hP2pIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404371: fltTcaIsisIsisP2pStats1dP2pIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404372: fltTcaIsisIsisP2pStats1wP2pIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404373: fltTcaIsisIsisP2pStats1moP2pIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404374: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404375: fltTcaIsisIsisP2pStats1yearP2pIIHPktsTxAvg
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4044: fltHinventoryRsCosmosToPvtEndpointResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404400: fltTcaIsisIsisP2pStats5minP2pIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404401: fltTcaIsisIsisP2pStats15minP2pIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404402: fltTcaIsisIsisP2pStats1hP2pIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404403: fltTcaIsisIsisP2pStats1dP2pIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404404: fltTcaIsisIsisP2pStats1wP2pIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404405: fltTcaIsisIsisP2pStats1moP2pIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404406: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404407: fltTcaIsisIsisP2pStats1yearP2pIIHPktsTxTr
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404408: fltTcaIsisIsisP2pStats5minP2pIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404409: fltTcaIsisIsisP2pStats15minP2pIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404410: fltTcaIsisIsisP2pStats1hP2pIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404411: fltTcaIsisIsisP2pStats1dP2pIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404412: fltTcaIsisIsisP2pStats1wP2pIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404413: fltTcaIsisIsisP2pStats1moP2pIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404414: fltTcaIsisIsisP2pStats1qtrP2pIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404415: fltTcaIsisIsisP2pStats1yearP2pIIHPktsTxRate
Severity: variable
Explanation: This fault is caused by "P2P IIH Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "P2P IIH Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404488: fltTcaIsisIsisPsnpStats5minPsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404489: fltTcaIsisIsisPsnpStats15minPsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404490: fltTcaIsisIsisPsnpStats1hPsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404491: fltTcaIsisIsisPsnpStats1dPsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404492: fltTcaIsisIsisPsnpStats1wPsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404493: fltTcaIsisIsisPsnpStats1moPsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404494: fltTcaIsisIsisPsnpStats1qtrPsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404495: fltTcaIsisIsisPsnpStats1yearPsnpPktsAuthErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4045: fltHinventoryRsCosmosToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404504: fltTcaIsisIsisPsnpStats5minPsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404505: fltTcaIsisIsisPsnpStats15minPsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404506: fltTcaIsisIsisPsnpStats1hPsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404507: fltTcaIsisIsisPsnpStats1dPsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404508: fltTcaIsisIsisPsnpStats1wPsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404509: fltTcaIsisIsisPsnpStats1moPsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404510: fltTcaIsisIsisPsnpStats1qtrPsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404511: fltTcaIsisIsisPsnpStats1yearPsnpPktsAuthErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404512: fltTcaIsisIsisPsnpStats5minPsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404513: fltTcaIsisIsisPsnpStats15minPsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404514: fltTcaIsisIsisPsnpStats1hPsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404515: fltTcaIsisIsisPsnpStats1dPsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404516: fltTcaIsisIsisPsnpStats1wPsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404517: fltTcaIsisIsisPsnpStats1moPsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404518: fltTcaIsisIsisPsnpStats1qtrPsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404519: fltTcaIsisIsisPsnpStats1yearPsnpPktsAuthErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404520: fltTcaIsisIsisPsnpStats5minPsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404521: fltTcaIsisIsisPsnpStats15minPsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404522: fltTcaIsisIsisPsnpStats1hPsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404523: fltTcaIsisIsisPsnpStats1dPsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404524: fltTcaIsisIsisPsnpStats1wPsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404525: fltTcaIsisIsisPsnpStats1moPsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404526: fltTcaIsisIsisPsnpStats1qtrPsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404527: fltTcaIsisIsisPsnpStats1yearPsnpPktsAuthErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404528: fltTcaIsisIsisPsnpStats5minPsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404529: fltTcaIsisIsisPsnpStats15minPsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404530: fltTcaIsisIsisPsnpStats1hPsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404531: fltTcaIsisIsisPsnpStats1dPsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404532: fltTcaIsisIsisPsnpStats1wPsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404533: fltTcaIsisIsisPsnpStats1moPsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404534: fltTcaIsisIsisPsnpStats1qtrPsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404535: fltTcaIsisIsisPsnpStats1yearPsnpPktsAuthErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404536: fltTcaIsisIsisPsnpStats5minPsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404537: fltTcaIsisIsisPsnpStats15minPsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404538: fltTcaIsisIsisPsnpStats1hPsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404539: fltTcaIsisIsisPsnpStats1dPsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404540: fltTcaIsisIsisPsnpStats1wPsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404541: fltTcaIsisIsisPsnpStats1moPsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404542: fltTcaIsisIsisPsnpStats1qtrPsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404543: fltTcaIsisIsisPsnpStats1yearPsnpPktsAuthErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404568: fltTcaIsisIsisPsnpStats5minPsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404569: fltTcaIsisIsisPsnpStats15minPsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404570: fltTcaIsisIsisPsnpStats1hPsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404571: fltTcaIsisIsisPsnpStats1dPsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404572: fltTcaIsisIsisPsnpStats1wPsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404573: fltTcaIsisIsisPsnpStats1moPsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404574: fltTcaIsisIsisPsnpStats1qtrPsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404575: fltTcaIsisIsisPsnpStats1yearPsnpPktsAuthErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404576: fltTcaIsisIsisPsnpStats5minPsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404577: fltTcaIsisIsisPsnpStats15minPsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404578: fltTcaIsisIsisPsnpStats1hPsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404579: fltTcaIsisIsisPsnpStats1dPsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404580: fltTcaIsisIsisPsnpStats1wPsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404581: fltTcaIsisIsisPsnpStats1moPsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404582: fltTcaIsisIsisPsnpStats1qtrPsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404583: fltTcaIsisIsisPsnpStats1yearPsnpPktsAuthErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Authentication Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Authentication Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4046: fltHinventoryRsCosmosToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404656: fltTcaIsisIsisPsnpStats5minPsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404657: fltTcaIsisIsisPsnpStats15minPsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404658: fltTcaIsisIsisPsnpStats1hPsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404659: fltTcaIsisIsisPsnpStats1dPsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404660: fltTcaIsisIsisPsnpStats1wPsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404661: fltTcaIsisIsisPsnpStats1moPsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404662: fltTcaIsisIsisPsnpStats1qtrPsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404663: fltTcaIsisIsisPsnpStats1yearPsnpPktsMiscErrLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404672: fltTcaIsisIsisPsnpStats5minPsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404673: fltTcaIsisIsisPsnpStats15minPsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404674: fltTcaIsisIsisPsnpStats1hPsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404675: fltTcaIsisIsisPsnpStats1dPsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404676: fltTcaIsisIsisPsnpStats1wPsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404677: fltTcaIsisIsisPsnpStats1moPsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404678: fltTcaIsisIsisPsnpStats1qtrPsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404679: fltTcaIsisIsisPsnpStats1yearPsnpPktsMiscErrCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404680: fltTcaIsisIsisPsnpStats5minPsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404681: fltTcaIsisIsisPsnpStats15minPsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404682: fltTcaIsisIsisPsnpStats1hPsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404683: fltTcaIsisIsisPsnpStats1dPsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404684: fltTcaIsisIsisPsnpStats1wPsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404685: fltTcaIsisIsisPsnpStats1moPsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404686: fltTcaIsisIsisPsnpStats1qtrPsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404687: fltTcaIsisIsisPsnpStats1yearPsnpPktsMiscErrPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404688: fltTcaIsisIsisPsnpStats5minPsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404689: fltTcaIsisIsisPsnpStats15minPsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404690: fltTcaIsisIsisPsnpStats1hPsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404691: fltTcaIsisIsisPsnpStats1dPsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404692: fltTcaIsisIsisPsnpStats1wPsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404693: fltTcaIsisIsisPsnpStats1moPsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404694: fltTcaIsisIsisPsnpStats1qtrPsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404695: fltTcaIsisIsisPsnpStats1yearPsnpPktsMiscErrMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404696: fltTcaIsisIsisPsnpStats5minPsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404697: fltTcaIsisIsisPsnpStats15minPsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404698: fltTcaIsisIsisPsnpStats1hPsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404699: fltTcaIsisIsisPsnpStats1dPsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4047: fltHinventoryRsClusterAgentPoolToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404700: fltTcaIsisIsisPsnpStats1wPsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404701: fltTcaIsisIsisPsnpStats1moPsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404702: fltTcaIsisIsisPsnpStats1qtrPsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404703: fltTcaIsisIsisPsnpStats1yearPsnpPktsMiscErrMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404704: fltTcaIsisIsisPsnpStats5minPsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404705: fltTcaIsisIsisPsnpStats15minPsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404706: fltTcaIsisIsisPsnpStats1hPsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404707: fltTcaIsisIsisPsnpStats1dPsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404708: fltTcaIsisIsisPsnpStats1wPsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404709: fltTcaIsisIsisPsnpStats1moPsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404710: fltTcaIsisIsisPsnpStats1qtrPsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404711: fltTcaIsisIsisPsnpStats1yearPsnpPktsMiscErrAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404736: fltTcaIsisIsisPsnpStats5minPsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404737: fltTcaIsisIsisPsnpStats15minPsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404738: fltTcaIsisIsisPsnpStats1hPsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404739: fltTcaIsisIsisPsnpStats1dPsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404740: fltTcaIsisIsisPsnpStats1wPsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404741: fltTcaIsisIsisPsnpStats1moPsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404742: fltTcaIsisIsisPsnpStats1qtrPsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404743: fltTcaIsisIsisPsnpStats1yearPsnpPktsMiscErrTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404744: fltTcaIsisIsisPsnpStats5minPsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404745: fltTcaIsisIsisPsnpStats15minPsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404746: fltTcaIsisIsisPsnpStats1hPsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404747: fltTcaIsisIsisPsnpStats1dPsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404748: fltTcaIsisIsisPsnpStats1wPsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404749: fltTcaIsisIsisPsnpStats1moPsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404750: fltTcaIsisIsisPsnpStats1qtrPsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404751: fltTcaIsisIsisPsnpStats1yearPsnpPktsMiscErrRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets with Miscelcsnpeous Error rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets with Miscelcsnpeous Error" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4048: fltHinventoryRsClusterToPvtEndpointResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404824: fltTcaIsisIsisPsnpStats5minPsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404825: fltTcaIsisIsisPsnpStats15minPsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404826: fltTcaIsisIsisPsnpStats1hPsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404827: fltTcaIsisIsisPsnpStats1dPsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404828: fltTcaIsisIsisPsnpStats1wPsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404829: fltTcaIsisIsisPsnpStats1moPsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404830: fltTcaIsisIsisPsnpStats1qtrPsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404831: fltTcaIsisIsisPsnpStats1yearPsnpPktsRxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404840: fltTcaIsisIsisPsnpStats5minPsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404841: fltTcaIsisIsisPsnpStats15minPsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404842: fltTcaIsisIsisPsnpStats1hPsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404843: fltTcaIsisIsisPsnpStats1dPsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404844: fltTcaIsisIsisPsnpStats1wPsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404845: fltTcaIsisIsisPsnpStats1moPsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404846: fltTcaIsisIsisPsnpStats1qtrPsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404847: fltTcaIsisIsisPsnpStats1yearPsnpPktsRxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404848: fltTcaIsisIsisPsnpStats5minPsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404849: fltTcaIsisIsisPsnpStats15minPsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404850: fltTcaIsisIsisPsnpStats1hPsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404851: fltTcaIsisIsisPsnpStats1dPsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404852: fltTcaIsisIsisPsnpStats1wPsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404853: fltTcaIsisIsisPsnpStats1moPsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404854: fltTcaIsisIsisPsnpStats1qtrPsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404855: fltTcaIsisIsisPsnpStats1yearPsnpPktsRxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404856: fltTcaIsisIsisPsnpStats5minPsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404857: fltTcaIsisIsisPsnpStats15minPsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404858: fltTcaIsisIsisPsnpStats1hPsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404859: fltTcaIsisIsisPsnpStats1dPsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404860: fltTcaIsisIsisPsnpStats1wPsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404861: fltTcaIsisIsisPsnpStats1moPsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404862: fltTcaIsisIsisPsnpStats1qtrPsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404863: fltTcaIsisIsisPsnpStats1yearPsnpPktsRxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404864: fltTcaIsisIsisPsnpStats5minPsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404865: fltTcaIsisIsisPsnpStats15minPsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404866: fltTcaIsisIsisPsnpStats1hPsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404867: fltTcaIsisIsisPsnpStats1dPsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404868: fltTcaIsisIsisPsnpStats1wPsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404869: fltTcaIsisIsisPsnpStats1moPsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404870: fltTcaIsisIsisPsnpStats1qtrPsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404871: fltTcaIsisIsisPsnpStats1yearPsnpPktsRxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404872: fltTcaIsisIsisPsnpStats5minPsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404873: fltTcaIsisIsisPsnpStats15minPsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404874: fltTcaIsisIsisPsnpStats1hPsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404875: fltTcaIsisIsisPsnpStats1dPsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404876: fltTcaIsisIsisPsnpStats1wPsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404877: fltTcaIsisIsisPsnpStats1moPsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404878: fltTcaIsisIsisPsnpStats1qtrPsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404879: fltTcaIsisIsisPsnpStats1yearPsnpPktsRxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4049: fltHinventoryRsClusterToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F404904: fltTcaIsisIsisPsnpStats5minPsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404905: fltTcaIsisIsisPsnpStats15minPsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404906: fltTcaIsisIsisPsnpStats1hPsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404907: fltTcaIsisIsisPsnpStats1dPsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404908: fltTcaIsisIsisPsnpStats1wPsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404909: fltTcaIsisIsisPsnpStats1moPsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404910: fltTcaIsisIsisPsnpStats1qtrPsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404911: fltTcaIsisIsisPsnpStats1yearPsnpPktsRxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404912: fltTcaIsisIsisPsnpStats5minPsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404913: fltTcaIsisIsisPsnpStats15minPsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404914: fltTcaIsisIsisPsnpStats1hPsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404915: fltTcaIsisIsisPsnpStats1dPsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404916: fltTcaIsisIsisPsnpStats1wPsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404917: fltTcaIsisIsisPsnpStats1moPsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404918: fltTcaIsisIsisPsnpStats1qtrPsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404919: fltTcaIsisIsisPsnpStats1yearPsnpPktsRxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Recevied rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Recevied" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404992: fltTcaIsisIsisPsnpStats5minPsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404993: fltTcaIsisIsisPsnpStats15minPsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404994: fltTcaIsisIsisPsnpStats1hPsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404995: fltTcaIsisIsisPsnpStats1dPsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404996: fltTcaIsisIsisPsnpStats1wPsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404997: fltTcaIsisIsisPsnpStats1moPsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404998: fltTcaIsisIsisPsnpStats1qtrPsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F404999: fltTcaIsisIsisPsnpStats1yearPsnpPktsTxLast
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4050: fltHinventoryRsEpToNicResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F405008: fltTcaIsisIsisPsnpStats5minPsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405009: fltTcaIsisIsisPsnpStats15minPsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405010: fltTcaIsisIsisPsnpStats1hPsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405011: fltTcaIsisIsisPsnpStats1dPsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405012: fltTcaIsisIsisPsnpStats1wPsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405013: fltTcaIsisIsisPsnpStats1moPsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405014: fltTcaIsisIsisPsnpStats1qtrPsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405015: fltTcaIsisIsisPsnpStats1yearPsnpPktsTxCum
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405016: fltTcaIsisIsisPsnpStats5minPsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405017: fltTcaIsisIsisPsnpStats15minPsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405018: fltTcaIsisIsisPsnpStats1hPsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405019: fltTcaIsisIsisPsnpStats1dPsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405020: fltTcaIsisIsisPsnpStats1wPsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405021: fltTcaIsisIsisPsnpStats1moPsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405022: fltTcaIsisIsisPsnpStats1qtrPsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405023: fltTcaIsisIsisPsnpStats1yearPsnpPktsTxPer
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405024: fltTcaIsisIsisPsnpStats5minPsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405025: fltTcaIsisIsisPsnpStats15minPsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405026: fltTcaIsisIsisPsnpStats1hPsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405027: fltTcaIsisIsisPsnpStats1dPsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405028: fltTcaIsisIsisPsnpStats1wPsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405029: fltTcaIsisIsisPsnpStats1moPsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405030: fltTcaIsisIsisPsnpStats1qtrPsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405031: fltTcaIsisIsisPsnpStats1yearPsnpPktsTxMin
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405032: fltTcaIsisIsisPsnpStats5minPsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405033: fltTcaIsisIsisPsnpStats15minPsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405034: fltTcaIsisIsisPsnpStats1hPsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405035: fltTcaIsisIsisPsnpStats1dPsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405036: fltTcaIsisIsisPsnpStats1wPsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405037: fltTcaIsisIsisPsnpStats1moPsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405038: fltTcaIsisIsisPsnpStats1qtrPsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405039: fltTcaIsisIsisPsnpStats1yearPsnpPktsTxMax
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405040: fltTcaIsisIsisPsnpStats5minPsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405041: fltTcaIsisIsisPsnpStats15minPsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405042: fltTcaIsisIsisPsnpStats1hPsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405043: fltTcaIsisIsisPsnpStats1dPsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405044: fltTcaIsisIsisPsnpStats1wPsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405045: fltTcaIsisIsisPsnpStats1moPsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405046: fltTcaIsisIsisPsnpStats1qtrPsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405047: fltTcaIsisIsisPsnpStats1yearPsnpPktsTxAvg
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405072: fltTcaIsisIsisPsnpStats5minPsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405073: fltTcaIsisIsisPsnpStats15minPsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405074: fltTcaIsisIsisPsnpStats1hPsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405075: fltTcaIsisIsisPsnpStats1dPsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405076: fltTcaIsisIsisPsnpStats1wPsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405077: fltTcaIsisIsisPsnpStats1moPsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405078: fltTcaIsisIsisPsnpStats1qtrPsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405079: fltTcaIsisIsisPsnpStats1yearPsnpPktsTxTr
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405080: fltTcaIsisIsisPsnpStats5minPsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405081: fltTcaIsisIsisPsnpStats15minPsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405082: fltTcaIsisIsisPsnpStats1hPsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405083: fltTcaIsisIsisPsnpStats1dPsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405084: fltTcaIsisIsisPsnpStats1wPsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405085: fltTcaIsisIsisPsnpStats1moPsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405086: fltTcaIsisIsisPsnpStats1qtrPsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F405087: fltTcaIsisIsisPsnpStats1yearPsnpPktsTxRate
Severity: variable
Explanation: This fault is caused by "PSNP Packets Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "PSNP Packets Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4051: fltHinventoryRsEpToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4052: fltHinventoryRsSqlServerToPvtEndpointResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4053: fltHinventoryRsStorageToPvtEndpointResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4055: fltHcloudNativeLBOperNativeLBOperHealthDown
Severity: major
Explanation: This fault occurs when an erroneous configuration is pushed for creating Health status of Native load balancer.
- Please check the fault message and make necessary changes to the config for creating health status of Native Load balancer.
- If fault still has not cleared, please contact Cisco TAC.
F4060: fltHcloudRsSelectorToTagParentResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4061: fltAnalyticsRecordPRecordParamMismatch
Severity: major
Explanation: This fault occurs when the record is incompatible with monitor
- Check the record match parameters for eg: Source IP, IPv6
F4062: fltHcloudPrivateEndpointOperPrivateEndpointOperError
Severity: minor
Explanation: This fault occurs where there are errors encountered while creating/updating/deleting private endpoints
- If the error indicates Access Denied or permissions related issues, check the access permissions.
- If the error indicates resource id errors for a custom service, check the name of the resource.
- For other errors, please take action based on the error message.
- If fault still has not cleared, please contact Cisco TAC.
F4063: fltHcloudRsPrivateEpToSvcResResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4065: fltInfraRsQosLlfcIfPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4066: fltHcloudRsToRedirDestResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4067: fltHinventoryRsRegistryToPvtEndpointResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4068: fltHinventoryRsRegistryToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4069: fltHinventoryRsRegistryToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4070: fltFvIfConfigIssuesNode-config-failure
Severity: minor
Explanation: This fault occurs when different netflow policy for a particular netflow type is configured under the same interface
- Remove the conflicting netflow policy.
- If the above action did not resolve the issue, delete and create the interface.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F4071: fltFvIfConfigIssuesInterface-config-failure
Severity: minor
Explanation: This fault occurs when different netflow policy for a particular netflow type is configured under the same interface
- Remove the conflicting netflow policy.
- If the above action did not resolve the issue, delete and create the interface.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F4072: fltHinventoryRsVaultToPvtEndpointResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4073: fltHinventoryRsVaultToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4074: fltHinventoryRsVaultToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4080: fltHcloudRsBricksToPubSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4081: fltHcloudRsBricksToPvtSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4082: fltHinventoryRsBricksToPubSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4083: fltHinventoryRsBricksToPvtSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4084: fltHinventoryRsBricksToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4085: fltHcloudRsSvcResToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4089: fltHinventoryRsRedisToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4090: fltHinventoryRsRedisToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4091: fltL1PrioFlowCtrlPConfigMismatch
Severity: warning
Explanation: This fault occurs when PriorityFlowControl/LinkLevelFLowControl is configured on same interface.
- Remove either PriorityFlowControl or LinkLevelFLowControl configuration
F4092: fltL1LinkLevelFlowCtrlPConfigMismatchLlfc
Severity: warning
Explanation: This fault occurs when PriorityFlowControl/LinkLevelFLowControl is configured on same interface.
- Remove either PriorityFlowControl or LinkLevelFLowControl configuration
F4093: fltL1LinkLevelFlowCtrlPPolicyConfigMissing
Severity: warning
Explanation: This fault occurs when LLFC is configured without slow-drain policy.
- slow-drain configuration is required for LLFC to work
F4096: fltHcloudRsEpToSecurityGroupErrorRsEpToSecurityGroupError
Severity: minor
Explanation: This fault occurs where the Endpoint Group could not be attached to the target Endpoint even if it was matching the Selector's expression.
- Depending on the cloud provider and your configuration, an Endpoint can be attached to at most one EPG. Make sure that the EPG's Selector is matching the intended Endpoint.
- If fault still has not cleared, please contact Cisco TAC.
F4097: fltHinventoryRsAddsToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4098: fltHinventoryRsAddsToSubnetResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F409864: fltTcaTunnelEgrTepCntrs5minDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409865: fltTcaTunnelEgrTepCntrs15minDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409866: fltTcaTunnelEgrTepCntrs1hDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409867: fltTcaTunnelEgrTepCntrs1dDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409868: fltTcaTunnelEgrTepCntrs1wDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409869: fltTcaTunnelEgrTepCntrs1moDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409870: fltTcaTunnelEgrTepCntrs1qtrDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409871: fltTcaTunnelEgrTepCntrs1yearDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409880: fltTcaTunnelEgrTepCntrs5minDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409881: fltTcaTunnelEgrTepCntrs15minDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409882: fltTcaTunnelEgrTepCntrs1hDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409883: fltTcaTunnelEgrTepCntrs1dDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409884: fltTcaTunnelEgrTepCntrs1wDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409885: fltTcaTunnelEgrTepCntrs1moDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409886: fltTcaTunnelEgrTepCntrs1qtrDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409887: fltTcaTunnelEgrTepCntrs1yearDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409888: fltTcaTunnelEgrTepCntrs5minDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409889: fltTcaTunnelEgrTepCntrs15minDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409890: fltTcaTunnelEgrTepCntrs1hDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409891: fltTcaTunnelEgrTepCntrs1dDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409892: fltTcaTunnelEgrTepCntrs1wDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409893: fltTcaTunnelEgrTepCntrs1moDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409894: fltTcaTunnelEgrTepCntrs1qtrDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409895: fltTcaTunnelEgrTepCntrs1yearDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409896: fltTcaTunnelEgrTepCntrs5minDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409897: fltTcaTunnelEgrTepCntrs15minDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409898: fltTcaTunnelEgrTepCntrs1hDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409899: fltTcaTunnelEgrTepCntrs1dDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4099: fltCoopDomCoopCoopAssertHit
Severity: major
Explanation: This fault occurs when the coop assert is hit
- Generate the show tech-support file and contact Cisco TAC.
F409900: fltTcaTunnelEgrTepCntrs1wDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409901: fltTcaTunnelEgrTepCntrs1moDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409902: fltTcaTunnelEgrTepCntrs1qtrDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409903: fltTcaTunnelEgrTepCntrs1yearDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409904: fltTcaTunnelEgrTepCntrs5minDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409905: fltTcaTunnelEgrTepCntrs15minDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409906: fltTcaTunnelEgrTepCntrs1hDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409907: fltTcaTunnelEgrTepCntrs1dDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409908: fltTcaTunnelEgrTepCntrs1wDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409909: fltTcaTunnelEgrTepCntrs1moDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409910: fltTcaTunnelEgrTepCntrs1qtrDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409911: fltTcaTunnelEgrTepCntrs1yearDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409912: fltTcaTunnelEgrTepCntrs5minDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409913: fltTcaTunnelEgrTepCntrs15minDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409914: fltTcaTunnelEgrTepCntrs1hDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409915: fltTcaTunnelEgrTepCntrs1dDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409916: fltTcaTunnelEgrTepCntrs1wDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409917: fltTcaTunnelEgrTepCntrs1moDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409918: fltTcaTunnelEgrTepCntrs1qtrDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409919: fltTcaTunnelEgrTepCntrs1yearDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409944: fltTcaTunnelEgrTepCntrs5minDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409945: fltTcaTunnelEgrTepCntrs15minDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409946: fltTcaTunnelEgrTepCntrs1hDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409947: fltTcaTunnelEgrTepCntrs1dDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409948: fltTcaTunnelEgrTepCntrs1wDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409949: fltTcaTunnelEgrTepCntrs1moDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409950: fltTcaTunnelEgrTepCntrs1qtrDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409951: fltTcaTunnelEgrTepCntrs1yearDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409952: fltTcaTunnelEgrTepCntrs5minDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409953: fltTcaTunnelEgrTepCntrs15minDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409954: fltTcaTunnelEgrTepCntrs1hDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409955: fltTcaTunnelEgrTepCntrs1dDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409956: fltTcaTunnelEgrTepCntrs1wDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409957: fltTcaTunnelEgrTepCntrs1moDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409958: fltTcaTunnelEgrTepCntrs1qtrDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F409959: fltTcaTunnelEgrTepCntrs1yearDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4100: fltTopSystemRouteTableModifyFail
Severity: minor
Explanation: This fault occurs when a configured static route cannot be created.
- Verify the route table for a similar route.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F410032: fltTcaTunnelEgrTepCntrs5minDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410033: fltTcaTunnelEgrTepCntrs15minDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410034: fltTcaTunnelEgrTepCntrs1hDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410035: fltTcaTunnelEgrTepCntrs1dDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410036: fltTcaTunnelEgrTepCntrs1wDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410037: fltTcaTunnelEgrTepCntrs1moDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410038: fltTcaTunnelEgrTepCntrs1qtrDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410039: fltTcaTunnelEgrTepCntrs1yearDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410048: fltTcaTunnelEgrTepCntrs5minDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410049: fltTcaTunnelEgrTepCntrs15minDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410050: fltTcaTunnelEgrTepCntrs1hDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410051: fltTcaTunnelEgrTepCntrs1dDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410052: fltTcaTunnelEgrTepCntrs1wDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410053: fltTcaTunnelEgrTepCntrs1moDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410054: fltTcaTunnelEgrTepCntrs1qtrDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410055: fltTcaTunnelEgrTepCntrs1yearDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410056: fltTcaTunnelEgrTepCntrs5minDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410057: fltTcaTunnelEgrTepCntrs15minDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410058: fltTcaTunnelEgrTepCntrs1hDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410059: fltTcaTunnelEgrTepCntrs1dDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410060: fltTcaTunnelEgrTepCntrs1wDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410061: fltTcaTunnelEgrTepCntrs1moDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410062: fltTcaTunnelEgrTepCntrs1qtrDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410063: fltTcaTunnelEgrTepCntrs1yearDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410064: fltTcaTunnelEgrTepCntrs5minDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410065: fltTcaTunnelEgrTepCntrs15minDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410066: fltTcaTunnelEgrTepCntrs1hDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410067: fltTcaTunnelEgrTepCntrs1dDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410068: fltTcaTunnelEgrTepCntrs1wDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410069: fltTcaTunnelEgrTepCntrs1moDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410070: fltTcaTunnelEgrTepCntrs1qtrDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410071: fltTcaTunnelEgrTepCntrs1yearDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410072: fltTcaTunnelEgrTepCntrs5minDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410073: fltTcaTunnelEgrTepCntrs15minDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410074: fltTcaTunnelEgrTepCntrs1hDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410075: fltTcaTunnelEgrTepCntrs1dDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410076: fltTcaTunnelEgrTepCntrs1wDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410077: fltTcaTunnelEgrTepCntrs1moDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410078: fltTcaTunnelEgrTepCntrs1qtrDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410079: fltTcaTunnelEgrTepCntrs1yearDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410080: fltTcaTunnelEgrTepCntrs5minDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410081: fltTcaTunnelEgrTepCntrs15minDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410082: fltTcaTunnelEgrTepCntrs1hDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410083: fltTcaTunnelEgrTepCntrs1dDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410084: fltTcaTunnelEgrTepCntrs1wDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410085: fltTcaTunnelEgrTepCntrs1moDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410086: fltTcaTunnelEgrTepCntrs1qtrDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410087: fltTcaTunnelEgrTepCntrs1yearDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4101: fltTopSystemCimcAddrSetFailure
Severity: minor
Explanation: This fault occurs when the controller's CIMC IP/Mask/Gateway cannot be update.
- Verify that IP/Mask/Gateway are valid.
- Verify that CIMC IP/Mask/Gateway have not been updated by checking the CIMC UI or running ipmitool command on the controller.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F410112: fltTcaTunnelEgrTepCntrs5minDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410113: fltTcaTunnelEgrTepCntrs15minDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410114: fltTcaTunnelEgrTepCntrs1hDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410115: fltTcaTunnelEgrTepCntrs1dDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410116: fltTcaTunnelEgrTepCntrs1wDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410117: fltTcaTunnelEgrTepCntrs1moDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410118: fltTcaTunnelEgrTepCntrs1qtrDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410119: fltTcaTunnelEgrTepCntrs1yearDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410120: fltTcaTunnelEgrTepCntrs5minDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410121: fltTcaTunnelEgrTepCntrs15minDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410122: fltTcaTunnelEgrTepCntrs1hDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410123: fltTcaTunnelEgrTepCntrs1dDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410124: fltTcaTunnelEgrTepCntrs1wDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410125: fltTcaTunnelEgrTepCntrs1moDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410126: fltTcaTunnelEgrTepCntrs1qtrDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410127: fltTcaTunnelEgrTepCntrs1yearDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410200: fltTcaTunnelEgrTepCntrs5minFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410201: fltTcaTunnelEgrTepCntrs15minFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410202: fltTcaTunnelEgrTepCntrs1hFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410203: fltTcaTunnelEgrTepCntrs1dFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410204: fltTcaTunnelEgrTepCntrs1wFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410205: fltTcaTunnelEgrTepCntrs1moFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410206: fltTcaTunnelEgrTepCntrs1qtrFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410207: fltTcaTunnelEgrTepCntrs1yearFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410216: fltTcaTunnelEgrTepCntrs5minFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410217: fltTcaTunnelEgrTepCntrs15minFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410218: fltTcaTunnelEgrTepCntrs1hFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410219: fltTcaTunnelEgrTepCntrs1dFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410220: fltTcaTunnelEgrTepCntrs1wFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410221: fltTcaTunnelEgrTepCntrs1moFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410222: fltTcaTunnelEgrTepCntrs1qtrFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410223: fltTcaTunnelEgrTepCntrs1yearFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410224: fltTcaTunnelEgrTepCntrs5minFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410225: fltTcaTunnelEgrTepCntrs15minFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410226: fltTcaTunnelEgrTepCntrs1hFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410227: fltTcaTunnelEgrTepCntrs1dFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410228: fltTcaTunnelEgrTepCntrs1wFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410229: fltTcaTunnelEgrTepCntrs1moFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410230: fltTcaTunnelEgrTepCntrs1qtrFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410231: fltTcaTunnelEgrTepCntrs1yearFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410232: fltTcaTunnelEgrTepCntrs5minFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410233: fltTcaTunnelEgrTepCntrs15minFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410234: fltTcaTunnelEgrTepCntrs1hFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410235: fltTcaTunnelEgrTepCntrs1dFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410236: fltTcaTunnelEgrTepCntrs1wFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410237: fltTcaTunnelEgrTepCntrs1moFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410238: fltTcaTunnelEgrTepCntrs1qtrFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410239: fltTcaTunnelEgrTepCntrs1yearFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410240: fltTcaTunnelEgrTepCntrs5minFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410241: fltTcaTunnelEgrTepCntrs15minFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410242: fltTcaTunnelEgrTepCntrs1hFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410243: fltTcaTunnelEgrTepCntrs1dFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410244: fltTcaTunnelEgrTepCntrs1wFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410245: fltTcaTunnelEgrTepCntrs1moFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410246: fltTcaTunnelEgrTepCntrs1qtrFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410247: fltTcaTunnelEgrTepCntrs1yearFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410248: fltTcaTunnelEgrTepCntrs5minFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410249: fltTcaTunnelEgrTepCntrs15minFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410250: fltTcaTunnelEgrTepCntrs1hFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410251: fltTcaTunnelEgrTepCntrs1dFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410252: fltTcaTunnelEgrTepCntrs1wFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410253: fltTcaTunnelEgrTepCntrs1moFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410254: fltTcaTunnelEgrTepCntrs1qtrFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410255: fltTcaTunnelEgrTepCntrs1yearFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410280: fltTcaTunnelEgrTepCntrs5minFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410281: fltTcaTunnelEgrTepCntrs15minFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410282: fltTcaTunnelEgrTepCntrs1hFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410283: fltTcaTunnelEgrTepCntrs1dFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410284: fltTcaTunnelEgrTepCntrs1wFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410285: fltTcaTunnelEgrTepCntrs1moFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410286: fltTcaTunnelEgrTepCntrs1qtrFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410287: fltTcaTunnelEgrTepCntrs1yearFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410288: fltTcaTunnelEgrTepCntrs5minFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410289: fltTcaTunnelEgrTepCntrs15minFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410290: fltTcaTunnelEgrTepCntrs1hFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410291: fltTcaTunnelEgrTepCntrs1dFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410292: fltTcaTunnelEgrTepCntrs1wFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410293: fltTcaTunnelEgrTepCntrs1moFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410294: fltTcaTunnelEgrTepCntrs1qtrFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410295: fltTcaTunnelEgrTepCntrs1yearFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4103: fltDatetimeRsNtpProvToNtpAuthKey2ResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F410368: fltTcaTunnelEgrTepCntrs5minFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410369: fltTcaTunnelEgrTepCntrs15minFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410370: fltTcaTunnelEgrTepCntrs1hFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410371: fltTcaTunnelEgrTepCntrs1dFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410372: fltTcaTunnelEgrTepCntrs1wFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410373: fltTcaTunnelEgrTepCntrs1moFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410374: fltTcaTunnelEgrTepCntrs1qtrFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410375: fltTcaTunnelEgrTepCntrs1yearFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410384: fltTcaTunnelEgrTepCntrs5minFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410385: fltTcaTunnelEgrTepCntrs15minFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410386: fltTcaTunnelEgrTepCntrs1hFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410387: fltTcaTunnelEgrTepCntrs1dFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410388: fltTcaTunnelEgrTepCntrs1wFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410389: fltTcaTunnelEgrTepCntrs1moFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410390: fltTcaTunnelEgrTepCntrs1qtrFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410391: fltTcaTunnelEgrTepCntrs1yearFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410392: fltTcaTunnelEgrTepCntrs5minFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410393: fltTcaTunnelEgrTepCntrs15minFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410394: fltTcaTunnelEgrTepCntrs1hFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410395: fltTcaTunnelEgrTepCntrs1dFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410396: fltTcaTunnelEgrTepCntrs1wFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410397: fltTcaTunnelEgrTepCntrs1moFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410398: fltTcaTunnelEgrTepCntrs1qtrFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410399: fltTcaTunnelEgrTepCntrs1yearFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4104: fltL3extRsPathL3OutAttMtuMacMismatch
Severity: warning
Explanation: This fault occurs when identical l3extRsPathL3OutAtt are configured with different MTU/MAC values. l3extRsPathL3OutAtt are identical when their IP, VLAN and node/interface values are same. Only one of the configured MTU/MAC values will be used on the interface.
- Confgure the same MTU/MAC on all l3extRsPathL3OutAtt with identical IP, VLAN and interface.
F410400: fltTcaTunnelEgrTepCntrs5minFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410401: fltTcaTunnelEgrTepCntrs15minFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410402: fltTcaTunnelEgrTepCntrs1hFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410403: fltTcaTunnelEgrTepCntrs1dFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410404: fltTcaTunnelEgrTepCntrs1wFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410405: fltTcaTunnelEgrTepCntrs1moFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410406: fltTcaTunnelEgrTepCntrs1qtrFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410407: fltTcaTunnelEgrTepCntrs1yearFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410408: fltTcaTunnelEgrTepCntrs5minFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410409: fltTcaTunnelEgrTepCntrs15minFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410410: fltTcaTunnelEgrTepCntrs1hFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410411: fltTcaTunnelEgrTepCntrs1dFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410412: fltTcaTunnelEgrTepCntrs1wFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410413: fltTcaTunnelEgrTepCntrs1moFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410414: fltTcaTunnelEgrTepCntrs1qtrFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410415: fltTcaTunnelEgrTepCntrs1yearFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410416: fltTcaTunnelEgrTepCntrs5minFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410417: fltTcaTunnelEgrTepCntrs15minFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410418: fltTcaTunnelEgrTepCntrs1hFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410419: fltTcaTunnelEgrTepCntrs1dFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410420: fltTcaTunnelEgrTepCntrs1wFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410421: fltTcaTunnelEgrTepCntrs1moFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410422: fltTcaTunnelEgrTepCntrs1qtrFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410423: fltTcaTunnelEgrTepCntrs1yearFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410448: fltTcaTunnelEgrTepCntrs5minFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410449: fltTcaTunnelEgrTepCntrs15minFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410450: fltTcaTunnelEgrTepCntrs1hFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410451: fltTcaTunnelEgrTepCntrs1dFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410452: fltTcaTunnelEgrTepCntrs1wFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410453: fltTcaTunnelEgrTepCntrs1moFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410454: fltTcaTunnelEgrTepCntrs1qtrFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410455: fltTcaTunnelEgrTepCntrs1yearFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410456: fltTcaTunnelEgrTepCntrs5minFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410457: fltTcaTunnelEgrTepCntrs15minFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410458: fltTcaTunnelEgrTepCntrs1hFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410459: fltTcaTunnelEgrTepCntrs1dFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410460: fltTcaTunnelEgrTepCntrs1wFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410461: fltTcaTunnelEgrTepCntrs1moFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410462: fltTcaTunnelEgrTepCntrs1qtrFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410463: fltTcaTunnelEgrTepCntrs1yearFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410536: fltTcaTunnelIngrTepCntrs5minDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410537: fltTcaTunnelIngrTepCntrs15minDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410538: fltTcaTunnelIngrTepCntrs1hDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410539: fltTcaTunnelIngrTepCntrs1dDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410540: fltTcaTunnelIngrTepCntrs1wDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410541: fltTcaTunnelIngrTepCntrs1moDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410542: fltTcaTunnelIngrTepCntrs1qtrDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410543: fltTcaTunnelIngrTepCntrs1yearDropBytesLast
Severity: variable
Explanation: This fault is caused by "Drop Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410552: fltTcaTunnelIngrTepCntrs5minDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410553: fltTcaTunnelIngrTepCntrs15minDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410554: fltTcaTunnelIngrTepCntrs1hDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410555: fltTcaTunnelIngrTepCntrs1dDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410556: fltTcaTunnelIngrTepCntrs1wDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410557: fltTcaTunnelIngrTepCntrs1moDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410558: fltTcaTunnelIngrTepCntrs1qtrDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410559: fltTcaTunnelIngrTepCntrs1yearDropBytesCum
Severity: variable
Explanation: This fault is caused by "Drop Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410560: fltTcaTunnelIngrTepCntrs5minDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410561: fltTcaTunnelIngrTepCntrs15minDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410562: fltTcaTunnelIngrTepCntrs1hDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410563: fltTcaTunnelIngrTepCntrs1dDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410564: fltTcaTunnelIngrTepCntrs1wDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410565: fltTcaTunnelIngrTepCntrs1moDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410566: fltTcaTunnelIngrTepCntrs1qtrDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410567: fltTcaTunnelIngrTepCntrs1yearDropBytesPer
Severity: variable
Explanation: This fault is caused by "Drop Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410568: fltTcaTunnelIngrTepCntrs5minDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410569: fltTcaTunnelIngrTepCntrs15minDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410570: fltTcaTunnelIngrTepCntrs1hDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410571: fltTcaTunnelIngrTepCntrs1dDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410572: fltTcaTunnelIngrTepCntrs1wDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410573: fltTcaTunnelIngrTepCntrs1moDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410574: fltTcaTunnelIngrTepCntrs1qtrDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410575: fltTcaTunnelIngrTepCntrs1yearDropBytesMin
Severity: variable
Explanation: This fault is caused by "Drop Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410576: fltTcaTunnelIngrTepCntrs5minDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410577: fltTcaTunnelIngrTepCntrs15minDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410578: fltTcaTunnelIngrTepCntrs1hDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410579: fltTcaTunnelIngrTepCntrs1dDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410580: fltTcaTunnelIngrTepCntrs1wDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410581: fltTcaTunnelIngrTepCntrs1moDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410582: fltTcaTunnelIngrTepCntrs1qtrDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410583: fltTcaTunnelIngrTepCntrs1yearDropBytesMax
Severity: variable
Explanation: This fault is caused by "Drop Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410584: fltTcaTunnelIngrTepCntrs5minDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410585: fltTcaTunnelIngrTepCntrs15minDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410586: fltTcaTunnelIngrTepCntrs1hDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410587: fltTcaTunnelIngrTepCntrs1dDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410588: fltTcaTunnelIngrTepCntrs1wDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410589: fltTcaTunnelIngrTepCntrs1moDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410590: fltTcaTunnelIngrTepCntrs1qtrDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410591: fltTcaTunnelIngrTepCntrs1yearDropBytesAvg
Severity: variable
Explanation: This fault is caused by "Drop Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410616: fltTcaTunnelIngrTepCntrs5minDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410617: fltTcaTunnelIngrTepCntrs15minDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410618: fltTcaTunnelIngrTepCntrs1hDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410619: fltTcaTunnelIngrTepCntrs1dDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410620: fltTcaTunnelIngrTepCntrs1wDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410621: fltTcaTunnelIngrTepCntrs1moDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410622: fltTcaTunnelIngrTepCntrs1qtrDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410623: fltTcaTunnelIngrTepCntrs1yearDropBytesTr
Severity: variable
Explanation: This fault is caused by "Drop Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410624: fltTcaTunnelIngrTepCntrs5minDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410625: fltTcaTunnelIngrTepCntrs15minDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410626: fltTcaTunnelIngrTepCntrs1hDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410627: fltTcaTunnelIngrTepCntrs1dDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410628: fltTcaTunnelIngrTepCntrs1wDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410629: fltTcaTunnelIngrTepCntrs1moDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410630: fltTcaTunnelIngrTepCntrs1qtrDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410631: fltTcaTunnelIngrTepCntrs1yearDropBytesRate
Severity: variable
Explanation: This fault is caused by "Drop Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4107: fltApPluginHighPrivilegeAppNotSigned
Severity: minor
Explanation: This fault occurs when there is a signature verification failure for a high privilege app.
Recommended Action: If you see this fault, please make sure that app was not modified after downloading from Cisco. Re-download the app from cisco app center and try again.
F410704: fltTcaTunnelIngrTepCntrs5minDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410705: fltTcaTunnelIngrTepCntrs15minDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410706: fltTcaTunnelIngrTepCntrs1hDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410707: fltTcaTunnelIngrTepCntrs1dDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410708: fltTcaTunnelIngrTepCntrs1wDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410709: fltTcaTunnelIngrTepCntrs1moDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410710: fltTcaTunnelIngrTepCntrs1qtrDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410711: fltTcaTunnelIngrTepCntrs1yearDropPktsLast
Severity: variable
Explanation: This fault is caused by "Drop Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410720: fltTcaTunnelIngrTepCntrs5minDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410721: fltTcaTunnelIngrTepCntrs15minDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410722: fltTcaTunnelIngrTepCntrs1hDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410723: fltTcaTunnelIngrTepCntrs1dDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410724: fltTcaTunnelIngrTepCntrs1wDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410725: fltTcaTunnelIngrTepCntrs1moDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410726: fltTcaTunnelIngrTepCntrs1qtrDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410727: fltTcaTunnelIngrTepCntrs1yearDropPktsCum
Severity: variable
Explanation: This fault is caused by "Drop Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410728: fltTcaTunnelIngrTepCntrs5minDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410729: fltTcaTunnelIngrTepCntrs15minDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410730: fltTcaTunnelIngrTepCntrs1hDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410731: fltTcaTunnelIngrTepCntrs1dDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410732: fltTcaTunnelIngrTepCntrs1wDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410733: fltTcaTunnelIngrTepCntrs1moDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410734: fltTcaTunnelIngrTepCntrs1qtrDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410735: fltTcaTunnelIngrTepCntrs1yearDropPktsPer
Severity: variable
Explanation: This fault is caused by "Drop Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410736: fltTcaTunnelIngrTepCntrs5minDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410737: fltTcaTunnelIngrTepCntrs15minDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410738: fltTcaTunnelIngrTepCntrs1hDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410739: fltTcaTunnelIngrTepCntrs1dDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410740: fltTcaTunnelIngrTepCntrs1wDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410741: fltTcaTunnelIngrTepCntrs1moDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410742: fltTcaTunnelIngrTepCntrs1qtrDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410743: fltTcaTunnelIngrTepCntrs1yearDropPktsMin
Severity: variable
Explanation: This fault is caused by "Drop Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410744: fltTcaTunnelIngrTepCntrs5minDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410745: fltTcaTunnelIngrTepCntrs15minDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410746: fltTcaTunnelIngrTepCntrs1hDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410747: fltTcaTunnelIngrTepCntrs1dDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410748: fltTcaTunnelIngrTepCntrs1wDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410749: fltTcaTunnelIngrTepCntrs1moDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410750: fltTcaTunnelIngrTepCntrs1qtrDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410751: fltTcaTunnelIngrTepCntrs1yearDropPktsMax
Severity: variable
Explanation: This fault is caused by "Drop Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410752: fltTcaTunnelIngrTepCntrs5minDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410753: fltTcaTunnelIngrTepCntrs15minDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410754: fltTcaTunnelIngrTepCntrs1hDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410755: fltTcaTunnelIngrTepCntrs1dDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410756: fltTcaTunnelIngrTepCntrs1wDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410757: fltTcaTunnelIngrTepCntrs1moDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410758: fltTcaTunnelIngrTepCntrs1qtrDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410759: fltTcaTunnelIngrTepCntrs1yearDropPktsAvg
Severity: variable
Explanation: This fault is caused by "Drop Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410784: fltTcaTunnelIngrTepCntrs5minDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410785: fltTcaTunnelIngrTepCntrs15minDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410786: fltTcaTunnelIngrTepCntrs1hDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410787: fltTcaTunnelIngrTepCntrs1dDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410788: fltTcaTunnelIngrTepCntrs1wDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410789: fltTcaTunnelIngrTepCntrs1moDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410790: fltTcaTunnelIngrTepCntrs1qtrDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410791: fltTcaTunnelIngrTepCntrs1yearDropPktsTr
Severity: variable
Explanation: This fault is caused by "Drop Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410792: fltTcaTunnelIngrTepCntrs5minDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410793: fltTcaTunnelIngrTepCntrs15minDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410794: fltTcaTunnelIngrTepCntrs1hDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410795: fltTcaTunnelIngrTepCntrs1dDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410796: fltTcaTunnelIngrTepCntrs1wDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410797: fltTcaTunnelIngrTepCntrs1moDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410798: fltTcaTunnelIngrTepCntrs1qtrDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410799: fltTcaTunnelIngrTepCntrs1yearDropPktsRate
Severity: variable
Explanation: This fault is caused by "Drop Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Drop Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4108: fltDbgacRsToEsgForEpgToEpgResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F410872: fltTcaTunnelIngrTepCntrs5minFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410873: fltTcaTunnelIngrTepCntrs15minFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410874: fltTcaTunnelIngrTepCntrs1hFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410875: fltTcaTunnelIngrTepCntrs1dFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410876: fltTcaTunnelIngrTepCntrs1wFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410877: fltTcaTunnelIngrTepCntrs1moFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410878: fltTcaTunnelIngrTepCntrs1qtrFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410879: fltTcaTunnelIngrTepCntrs1yearFwdBytesLast
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410888: fltTcaTunnelIngrTepCntrs5minFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410889: fltTcaTunnelIngrTepCntrs15minFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410890: fltTcaTunnelIngrTepCntrs1hFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410891: fltTcaTunnelIngrTepCntrs1dFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410892: fltTcaTunnelIngrTepCntrs1wFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410893: fltTcaTunnelIngrTepCntrs1moFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410894: fltTcaTunnelIngrTepCntrs1qtrFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410895: fltTcaTunnelIngrTepCntrs1yearFwdBytesCum
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410896: fltTcaTunnelIngrTepCntrs5minFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410897: fltTcaTunnelIngrTepCntrs15minFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410898: fltTcaTunnelIngrTepCntrs1hFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410899: fltTcaTunnelIngrTepCntrs1dFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4109: fltDbgacRsFromEsgResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F410900: fltTcaTunnelIngrTepCntrs1wFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410901: fltTcaTunnelIngrTepCntrs1moFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410902: fltTcaTunnelIngrTepCntrs1qtrFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410903: fltTcaTunnelIngrTepCntrs1yearFwdBytesPer
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410904: fltTcaTunnelIngrTepCntrs5minFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410905: fltTcaTunnelIngrTepCntrs15minFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410906: fltTcaTunnelIngrTepCntrs1hFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410907: fltTcaTunnelIngrTepCntrs1dFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410908: fltTcaTunnelIngrTepCntrs1wFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410909: fltTcaTunnelIngrTepCntrs1moFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410910: fltTcaTunnelIngrTepCntrs1qtrFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410911: fltTcaTunnelIngrTepCntrs1yearFwdBytesMin
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410912: fltTcaTunnelIngrTepCntrs5minFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410913: fltTcaTunnelIngrTepCntrs15minFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410914: fltTcaTunnelIngrTepCntrs1hFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410915: fltTcaTunnelIngrTepCntrs1dFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410916: fltTcaTunnelIngrTepCntrs1wFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410917: fltTcaTunnelIngrTepCntrs1moFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410918: fltTcaTunnelIngrTepCntrs1qtrFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410919: fltTcaTunnelIngrTepCntrs1yearFwdBytesMax
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410920: fltTcaTunnelIngrTepCntrs5minFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410921: fltTcaTunnelIngrTepCntrs15minFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410922: fltTcaTunnelIngrTepCntrs1hFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410923: fltTcaTunnelIngrTepCntrs1dFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410924: fltTcaTunnelIngrTepCntrs1wFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410925: fltTcaTunnelIngrTepCntrs1moFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410926: fltTcaTunnelIngrTepCntrs1qtrFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410927: fltTcaTunnelIngrTepCntrs1yearFwdBytesAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410952: fltTcaTunnelIngrTepCntrs5minFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410953: fltTcaTunnelIngrTepCntrs15minFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410954: fltTcaTunnelIngrTepCntrs1hFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410955: fltTcaTunnelIngrTepCntrs1dFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410956: fltTcaTunnelIngrTepCntrs1wFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410957: fltTcaTunnelIngrTepCntrs1moFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410958: fltTcaTunnelIngrTepCntrs1qtrFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410959: fltTcaTunnelIngrTepCntrs1yearFwdBytesTr
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410960: fltTcaTunnelIngrTepCntrs5minFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410961: fltTcaTunnelIngrTepCntrs15minFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410962: fltTcaTunnelIngrTepCntrs1hFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410963: fltTcaTunnelIngrTepCntrs1dFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410964: fltTcaTunnelIngrTepCntrs1wFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410965: fltTcaTunnelIngrTepCntrs1moFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410966: fltTcaTunnelIngrTepCntrs1qtrFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F410967: fltTcaTunnelIngrTepCntrs1yearFwdBytesRate
Severity: variable
Explanation: This fault is caused by "Forwarded Bytes rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4110: fltFvEpMacTagConfigurationFailed
Severity: minor
Explanation: This fault occurs when an Endpoint (fvEpMacTag) is not correctly configured.
- The specific Bridge Domain (bd-does-not-exist) or VRF (vrf-does-not-exist) does not exist. As a result, the configuration is not applied. Verify that the specific Bridge Domain or VRF exists.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F411040: fltTcaTunnelIngrTepCntrs5minFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411041: fltTcaTunnelIngrTepCntrs15minFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411042: fltTcaTunnelIngrTepCntrs1hFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411043: fltTcaTunnelIngrTepCntrs1dFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411044: fltTcaTunnelIngrTepCntrs1wFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411045: fltTcaTunnelIngrTepCntrs1moFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411046: fltTcaTunnelIngrTepCntrs1qtrFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411047: fltTcaTunnelIngrTepCntrs1yearFwdPktsLast
Severity: variable
Explanation: This fault is caused by "Forwarded Packets current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411056: fltTcaTunnelIngrTepCntrs5minFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411057: fltTcaTunnelIngrTepCntrs15minFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411058: fltTcaTunnelIngrTepCntrs1hFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411059: fltTcaTunnelIngrTepCntrs1dFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411060: fltTcaTunnelIngrTepCntrs1wFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411061: fltTcaTunnelIngrTepCntrs1moFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411062: fltTcaTunnelIngrTepCntrs1qtrFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411063: fltTcaTunnelIngrTepCntrs1yearFwdPktsCum
Severity: variable
Explanation: This fault is caused by "Forwarded Packets cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411064: fltTcaTunnelIngrTepCntrs5minFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411065: fltTcaTunnelIngrTepCntrs15minFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411066: fltTcaTunnelIngrTepCntrs1hFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411067: fltTcaTunnelIngrTepCntrs1dFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411068: fltTcaTunnelIngrTepCntrs1wFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411069: fltTcaTunnelIngrTepCntrs1moFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411070: fltTcaTunnelIngrTepCntrs1qtrFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411071: fltTcaTunnelIngrTepCntrs1yearFwdPktsPer
Severity: variable
Explanation: This fault is caused by "Forwarded Packets periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411072: fltTcaTunnelIngrTepCntrs5minFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411073: fltTcaTunnelIngrTepCntrs15minFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411074: fltTcaTunnelIngrTepCntrs1hFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411075: fltTcaTunnelIngrTepCntrs1dFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411076: fltTcaTunnelIngrTepCntrs1wFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411077: fltTcaTunnelIngrTepCntrs1moFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411078: fltTcaTunnelIngrTepCntrs1qtrFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411079: fltTcaTunnelIngrTepCntrs1yearFwdPktsMin
Severity: variable
Explanation: This fault is caused by "Forwarded Packets minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411080: fltTcaTunnelIngrTepCntrs5minFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411081: fltTcaTunnelIngrTepCntrs15minFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411082: fltTcaTunnelIngrTepCntrs1hFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411083: fltTcaTunnelIngrTepCntrs1dFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411084: fltTcaTunnelIngrTepCntrs1wFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411085: fltTcaTunnelIngrTepCntrs1moFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411086: fltTcaTunnelIngrTepCntrs1qtrFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411087: fltTcaTunnelIngrTepCntrs1yearFwdPktsMax
Severity: variable
Explanation: This fault is caused by "Forwarded Packets maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411088: fltTcaTunnelIngrTepCntrs5minFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411089: fltTcaTunnelIngrTepCntrs15minFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411090: fltTcaTunnelIngrTepCntrs1hFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411091: fltTcaTunnelIngrTepCntrs1dFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411092: fltTcaTunnelIngrTepCntrs1wFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411093: fltTcaTunnelIngrTepCntrs1moFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411094: fltTcaTunnelIngrTepCntrs1qtrFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411095: fltTcaTunnelIngrTepCntrs1yearFwdPktsAvg
Severity: variable
Explanation: This fault is caused by "Forwarded Packets average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411120: fltTcaTunnelIngrTepCntrs5minFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411121: fltTcaTunnelIngrTepCntrs15minFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411122: fltTcaTunnelIngrTepCntrs1hFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411123: fltTcaTunnelIngrTepCntrs1dFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411124: fltTcaTunnelIngrTepCntrs1wFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411125: fltTcaTunnelIngrTepCntrs1moFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411126: fltTcaTunnelIngrTepCntrs1qtrFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411127: fltTcaTunnelIngrTepCntrs1yearFwdPktsTr
Severity: variable
Explanation: This fault is caused by "Forwarded Packets trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411128: fltTcaTunnelIngrTepCntrs5minFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411129: fltTcaTunnelIngrTepCntrs15minFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411130: fltTcaTunnelIngrTepCntrs1hFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411131: fltTcaTunnelIngrTepCntrs1dFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411132: fltTcaTunnelIngrTepCntrs1wFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411133: fltTcaTunnelIngrTepCntrs1moFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411134: fltTcaTunnelIngrTepCntrs1qtrFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411135: fltTcaTunnelIngrTepCntrs1yearFwdPktsRate
Severity: variable
Explanation: This fault is caused by "Forwarded Packets rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Forwarded Packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411208: fltTcaTunnelTunnelFlapCntrs5minFlapsLast
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411209: fltTcaTunnelTunnelFlapCntrs15minFlapsLast
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411210: fltTcaTunnelTunnelFlapCntrs1hFlapsLast
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411211: fltTcaTunnelTunnelFlapCntrs1dFlapsLast
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411212: fltTcaTunnelTunnelFlapCntrs1wFlapsLast
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411213: fltTcaTunnelTunnelFlapCntrs1moFlapsLast
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411214: fltTcaTunnelTunnelFlapCntrs1qtrFlapsLast
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411215: fltTcaTunnelTunnelFlapCntrs1yearFlapsLast
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411224: fltTcaTunnelTunnelFlapCntrs5minFlapsCum
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411225: fltTcaTunnelTunnelFlapCntrs15minFlapsCum
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411226: fltTcaTunnelTunnelFlapCntrs1hFlapsCum
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411227: fltTcaTunnelTunnelFlapCntrs1dFlapsCum
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411228: fltTcaTunnelTunnelFlapCntrs1wFlapsCum
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411229: fltTcaTunnelTunnelFlapCntrs1moFlapsCum
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411230: fltTcaTunnelTunnelFlapCntrs1qtrFlapsCum
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411231: fltTcaTunnelTunnelFlapCntrs1yearFlapsCum
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411232: fltTcaTunnelTunnelFlapCntrs5minFlapsPer
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411233: fltTcaTunnelTunnelFlapCntrs15minFlapsPer
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411234: fltTcaTunnelTunnelFlapCntrs1hFlapsPer
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411235: fltTcaTunnelTunnelFlapCntrs1dFlapsPer
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411236: fltTcaTunnelTunnelFlapCntrs1wFlapsPer
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411237: fltTcaTunnelTunnelFlapCntrs1moFlapsPer
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411238: fltTcaTunnelTunnelFlapCntrs1qtrFlapsPer
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411239: fltTcaTunnelTunnelFlapCntrs1yearFlapsPer
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411240: fltTcaTunnelTunnelFlapCntrs5minFlapsMin
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411241: fltTcaTunnelTunnelFlapCntrs15minFlapsMin
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411242: fltTcaTunnelTunnelFlapCntrs1hFlapsMin
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411243: fltTcaTunnelTunnelFlapCntrs1dFlapsMin
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411244: fltTcaTunnelTunnelFlapCntrs1wFlapsMin
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411245: fltTcaTunnelTunnelFlapCntrs1moFlapsMin
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411246: fltTcaTunnelTunnelFlapCntrs1qtrFlapsMin
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411247: fltTcaTunnelTunnelFlapCntrs1yearFlapsMin
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411248: fltTcaTunnelTunnelFlapCntrs5minFlapsMax
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411249: fltTcaTunnelTunnelFlapCntrs15minFlapsMax
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411250: fltTcaTunnelTunnelFlapCntrs1hFlapsMax
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411251: fltTcaTunnelTunnelFlapCntrs1dFlapsMax
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411252: fltTcaTunnelTunnelFlapCntrs1wFlapsMax
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411253: fltTcaTunnelTunnelFlapCntrs1moFlapsMax
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411254: fltTcaTunnelTunnelFlapCntrs1qtrFlapsMax
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411255: fltTcaTunnelTunnelFlapCntrs1yearFlapsMax
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411256: fltTcaTunnelTunnelFlapCntrs5minFlapsAvg
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411257: fltTcaTunnelTunnelFlapCntrs15minFlapsAvg
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411258: fltTcaTunnelTunnelFlapCntrs1hFlapsAvg
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411259: fltTcaTunnelTunnelFlapCntrs1dFlapsAvg
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411260: fltTcaTunnelTunnelFlapCntrs1wFlapsAvg
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411261: fltTcaTunnelTunnelFlapCntrs1moFlapsAvg
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411262: fltTcaTunnelTunnelFlapCntrs1qtrFlapsAvg
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411263: fltTcaTunnelTunnelFlapCntrs1yearFlapsAvg
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411288: fltTcaTunnelTunnelFlapCntrs5minFlapsTr
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411289: fltTcaTunnelTunnelFlapCntrs15minFlapsTr
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411290: fltTcaTunnelTunnelFlapCntrs1hFlapsTr
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411291: fltTcaTunnelTunnelFlapCntrs1dFlapsTr
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411292: fltTcaTunnelTunnelFlapCntrs1wFlapsTr
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411293: fltTcaTunnelTunnelFlapCntrs1moFlapsTr
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411294: fltTcaTunnelTunnelFlapCntrs1qtrFlapsTr
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411295: fltTcaTunnelTunnelFlapCntrs1yearFlapsTr
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411296: fltTcaTunnelTunnelFlapCntrs5minFlapsRate
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411297: fltTcaTunnelTunnelFlapCntrs15minFlapsRate
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411298: fltTcaTunnelTunnelFlapCntrs1hFlapsRate
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411299: fltTcaTunnelTunnelFlapCntrs1dFlapsRate
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411300: fltTcaTunnelTunnelFlapCntrs1wFlapsRate
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411301: fltTcaTunnelTunnelFlapCntrs1moFlapsRate
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411302: fltTcaTunnelTunnelFlapCntrs1qtrFlapsRate
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F411303: fltTcaTunnelTunnelFlapCntrs1yearFlapsRate
Severity: variable
Explanation: This fault is caused by "Number of Tunnel Flaps rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Tunnel Flaps" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4114: fltHcloudTargetGroupOperTargetGroupOperHealthDown
Severity: minor
Explanation: This fault occurs when an erroneous configuration is pushed for creating a Native service Target Group.
- Please check the fault message and make necessary changes to the config for creating the Native service provider Epg representing target server pool.
- If fault still has not cleared, please contact Cisco TAC.
F4119: fltVmmClusterFaultInfoMajorOperationalIssues
Severity: major
Explanation: This fault is raised when there is an operational issue with respect to VmmMgr Cluster
- From the fault description resolve the issue on the cluster
- If the above actions did not resolve the issue, collect avs-tech-support file and contact Cisco TAC.
F4120: fltVmmClusterFaultInfoMinorOperationalIssues
Severity: minor
Explanation: This fault is raised when there is an operational issue with respect to VmmMgr Cluster
- From the fault description resolve the issue on the cluster
- If the above actions did not resolve the issue, collect avs-tech-support file and contact Cisco TAC.
F4121: fltVmmClusterFaultInfoCriticalOperationalIssues
Severity: critical
Explanation: This fault is raised when there is an operational issue with respect to VmmMgr Cluster
- From the fault description resolve the issue on the cluster
- If the above actions did not resolve the issue, collect avs-tech-support file and contact Cisco TAC.
F4122: fltInfraRsSynceInstPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4123: fltInfraRsSynceEthIfPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4124: fltFvEpIpTagConfigurationFailed
Severity: minor
Explanation: This fault occurs when an Endpoint (fvEpIpTag) is not correctly configured.
- vrf-does-not-exist: The specific VRF does not exist. As a result, the configuration is not applied. Verify that the specific VRF exists.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F4125: fltFvSubnetConfigurationFailed
Severity: major
Explanation: This fault occurs when an Subnet (fvSubnet) Tag is not correctly configured.
- multiple-tag-selector-match: The configured Policy Tag(s) match more than one ESG TagSelctor when there is no pre-existing match. As a result, the subnet is not classified into any ESGs because each subnet can be associated to only one ESG TagSelector. Remove or update Policy Tag(s) (tagTag) or ESG TagSelctor (fvTagSelector) so that there is only one Policy Tag matching an ESG TagSelector for this subnet.
- multiple-tag-selector-match-after-single-match: The configured Policy Tag(s) match more than one ESG TagSelctor after the subnet was already classified to an ESG via a previously configured tag. As a result, the subnet remains classified to the original ESG and the new Tag(s) matching other ESG TagSelectors will be ignored at the moment. Remove or update Policy Tag(s) (tagTag) or ESG TagSelctor (fvTagSelector) so that there is only one Policy Tag matching an ESG TagSelector for this endpoint.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F412632: fltTcaEqptcapacityBdUsage5minTotalCapLast
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412633: fltTcaEqptcapacityBdUsage15minTotalCapLast
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412634: fltTcaEqptcapacityBdUsage1hTotalCapLast
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412635: fltTcaEqptcapacityBdUsage1dTotalCapLast
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412636: fltTcaEqptcapacityBdUsage1wTotalCapLast
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412637: fltTcaEqptcapacityBdUsage1moTotalCapLast
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412638: fltTcaEqptcapacityBdUsage1qtrTotalCapLast
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412639: fltTcaEqptcapacityBdUsage1yearTotalCapLast
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412648: fltTcaEqptcapacityBdUsage5minTotalCapCum
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412649: fltTcaEqptcapacityBdUsage15minTotalCapCum
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412650: fltTcaEqptcapacityBdUsage1hTotalCapCum
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412651: fltTcaEqptcapacityBdUsage1dTotalCapCum
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412652: fltTcaEqptcapacityBdUsage1wTotalCapCum
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412653: fltTcaEqptcapacityBdUsage1moTotalCapCum
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412654: fltTcaEqptcapacityBdUsage1qtrTotalCapCum
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412655: fltTcaEqptcapacityBdUsage1yearTotalCapCum
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412656: fltTcaEqptcapacityBdUsage5minTotalCapPer
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412657: fltTcaEqptcapacityBdUsage15minTotalCapPer
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412658: fltTcaEqptcapacityBdUsage1hTotalCapPer
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412659: fltTcaEqptcapacityBdUsage1dTotalCapPer
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412660: fltTcaEqptcapacityBdUsage1wTotalCapPer
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412661: fltTcaEqptcapacityBdUsage1moTotalCapPer
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412662: fltTcaEqptcapacityBdUsage1qtrTotalCapPer
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412663: fltTcaEqptcapacityBdUsage1yearTotalCapPer
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412664: fltTcaEqptcapacityBdUsage5minTotalCapMin
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412665: fltTcaEqptcapacityBdUsage15minTotalCapMin
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412666: fltTcaEqptcapacityBdUsage1hTotalCapMin
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412667: fltTcaEqptcapacityBdUsage1dTotalCapMin
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412668: fltTcaEqptcapacityBdUsage1wTotalCapMin
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412669: fltTcaEqptcapacityBdUsage1moTotalCapMin
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412670: fltTcaEqptcapacityBdUsage1qtrTotalCapMin
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412671: fltTcaEqptcapacityBdUsage1yearTotalCapMin
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412672: fltTcaEqptcapacityBdUsage5minTotalCapMax
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412673: fltTcaEqptcapacityBdUsage15minTotalCapMax
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412674: fltTcaEqptcapacityBdUsage1hTotalCapMax
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412675: fltTcaEqptcapacityBdUsage1dTotalCapMax
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412676: fltTcaEqptcapacityBdUsage1wTotalCapMax
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412677: fltTcaEqptcapacityBdUsage1moTotalCapMax
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412678: fltTcaEqptcapacityBdUsage1qtrTotalCapMax
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412679: fltTcaEqptcapacityBdUsage1yearTotalCapMax
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412680: fltTcaEqptcapacityBdUsage5minTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412681: fltTcaEqptcapacityBdUsage15minTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412682: fltTcaEqptcapacityBdUsage1hTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412683: fltTcaEqptcapacityBdUsage1dTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412684: fltTcaEqptcapacityBdUsage1wTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412685: fltTcaEqptcapacityBdUsage1moTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412686: fltTcaEqptcapacityBdUsage1qtrTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412687: fltTcaEqptcapacityBdUsage1yearTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4127: fltTrigSchedPConfigurationFailed
Severity: major
Explanation: This fault occurs when schelduer is attached to 2 or more techsupport policy with same nodes
Recommended Action: None set.
F412712: fltTcaEqptcapacityBdUsage5minTotalCapTr
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412713: fltTcaEqptcapacityBdUsage15minTotalCapTr
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412714: fltTcaEqptcapacityBdUsage1hTotalCapTr
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412715: fltTcaEqptcapacityBdUsage1dTotalCapTr
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412716: fltTcaEqptcapacityBdUsage1wTotalCapTr
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412717: fltTcaEqptcapacityBdUsage1moTotalCapTr
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412718: fltTcaEqptcapacityBdUsage1qtrTotalCapTr
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412719: fltTcaEqptcapacityBdUsage1yearTotalCapTr
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412720: fltTcaEqptcapacityBdUsage5minTotalCapRate
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412721: fltTcaEqptcapacityBdUsage15minTotalCapRate
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412722: fltTcaEqptcapacityBdUsage1hTotalCapRate
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412723: fltTcaEqptcapacityBdUsage1dTotalCapRate
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412724: fltTcaEqptcapacityBdUsage1wTotalCapRate
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412725: fltTcaEqptcapacityBdUsage1moTotalCapRate
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412726: fltTcaEqptcapacityBdUsage1qtrTotalCapRate
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412727: fltTcaEqptcapacityBdUsage1yearTotalCapRate
Severity: variable
Explanation: This fault is caused by "Bridge domain entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bridge domain entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4128: fltSlaOperationOverThreshold
Severity: minor
Explanation: This fault occurs when an IP SLA response time goes over threshold.
- Check if there are any network delay issues.
- Confirm if the configured threshold value is correct.
F412800: fltTcaEqptcapacityBdUsage5minTotalLast
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412801: fltTcaEqptcapacityBdUsage15minTotalLast
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412802: fltTcaEqptcapacityBdUsage1hTotalLast
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412803: fltTcaEqptcapacityBdUsage1dTotalLast
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412804: fltTcaEqptcapacityBdUsage1wTotalLast
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412805: fltTcaEqptcapacityBdUsage1moTotalLast
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412806: fltTcaEqptcapacityBdUsage1qtrTotalLast
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412807: fltTcaEqptcapacityBdUsage1yearTotalLast
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412816: fltTcaEqptcapacityBdUsage5minTotalCum
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412817: fltTcaEqptcapacityBdUsage15minTotalCum
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412818: fltTcaEqptcapacityBdUsage1hTotalCum
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412819: fltTcaEqptcapacityBdUsage1dTotalCum
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412820: fltTcaEqptcapacityBdUsage1wTotalCum
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412821: fltTcaEqptcapacityBdUsage1moTotalCum
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412822: fltTcaEqptcapacityBdUsage1qtrTotalCum
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412823: fltTcaEqptcapacityBdUsage1yearTotalCum
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412824: fltTcaEqptcapacityBdUsage5minTotalPer
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412825: fltTcaEqptcapacityBdUsage15minTotalPer
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412826: fltTcaEqptcapacityBdUsage1hTotalPer
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412827: fltTcaEqptcapacityBdUsage1dTotalPer
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412828: fltTcaEqptcapacityBdUsage1wTotalPer
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412829: fltTcaEqptcapacityBdUsage1moTotalPer
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412830: fltTcaEqptcapacityBdUsage1qtrTotalPer
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412831: fltTcaEqptcapacityBdUsage1yearTotalPer
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412832: fltTcaEqptcapacityBdUsage5minTotalMin
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412833: fltTcaEqptcapacityBdUsage15minTotalMin
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412834: fltTcaEqptcapacityBdUsage1hTotalMin
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412835: fltTcaEqptcapacityBdUsage1dTotalMin
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412836: fltTcaEqptcapacityBdUsage1wTotalMin
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412837: fltTcaEqptcapacityBdUsage1moTotalMin
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412838: fltTcaEqptcapacityBdUsage1qtrTotalMin
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412839: fltTcaEqptcapacityBdUsage1yearTotalMin
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412840: fltTcaEqptcapacityBdUsage5minTotalMax
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412841: fltTcaEqptcapacityBdUsage15minTotalMax
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412842: fltTcaEqptcapacityBdUsage1hTotalMax
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412843: fltTcaEqptcapacityBdUsage1dTotalMax
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412844: fltTcaEqptcapacityBdUsage1wTotalMax
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412845: fltTcaEqptcapacityBdUsage1moTotalMax
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412846: fltTcaEqptcapacityBdUsage1qtrTotalMax
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412847: fltTcaEqptcapacityBdUsage1yearTotalMax
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412848: fltTcaEqptcapacityBdUsage5minTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412849: fltTcaEqptcapacityBdUsage15minTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412850: fltTcaEqptcapacityBdUsage1hTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412851: fltTcaEqptcapacityBdUsage1dTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412852: fltTcaEqptcapacityBdUsage1wTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412853: fltTcaEqptcapacityBdUsage1moTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412854: fltTcaEqptcapacityBdUsage1qtrTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412855: fltTcaEqptcapacityBdUsage1yearTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412880: fltTcaEqptcapacityBdUsage5minTotalTr
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412881: fltTcaEqptcapacityBdUsage15minTotalTr
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412882: fltTcaEqptcapacityBdUsage1hTotalTr
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412883: fltTcaEqptcapacityBdUsage1dTotalTr
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412884: fltTcaEqptcapacityBdUsage1wTotalTr
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412885: fltTcaEqptcapacityBdUsage1moTotalTr
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412886: fltTcaEqptcapacityBdUsage1qtrTotalTr
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412887: fltTcaEqptcapacityBdUsage1yearTotalTr
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412888: fltTcaEqptcapacityBdUsage5minTotalRate
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412889: fltTcaEqptcapacityBdUsage15minTotalRate
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412890: fltTcaEqptcapacityBdUsage1hTotalRate
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412891: fltTcaEqptcapacityBdUsage1dTotalRate
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412892: fltTcaEqptcapacityBdUsage1wTotalRate
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412893: fltTcaEqptcapacityBdUsage1moTotalRate
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412894: fltTcaEqptcapacityBdUsage1qtrTotalRate
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412895: fltTcaEqptcapacityBdUsage1yearTotalRate
Severity: variable
Explanation: This fault is caused by "Total Bridge domain entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Bridge domain entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412968: fltTcaEqptcapacityEpgUsage5minTotalCapLast
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412969: fltTcaEqptcapacityEpgUsage15minTotalCapLast
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412970: fltTcaEqptcapacityEpgUsage1hTotalCapLast
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412971: fltTcaEqptcapacityEpgUsage1dTotalCapLast
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412972: fltTcaEqptcapacityEpgUsage1wTotalCapLast
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412973: fltTcaEqptcapacityEpgUsage1moTotalCapLast
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412974: fltTcaEqptcapacityEpgUsage1qtrTotalCapLast
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412975: fltTcaEqptcapacityEpgUsage1yearTotalCapLast
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412984: fltTcaEqptcapacityEpgUsage5minTotalCapCum
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412985: fltTcaEqptcapacityEpgUsage15minTotalCapCum
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412986: fltTcaEqptcapacityEpgUsage1hTotalCapCum
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412987: fltTcaEqptcapacityEpgUsage1dTotalCapCum
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412988: fltTcaEqptcapacityEpgUsage1wTotalCapCum
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412989: fltTcaEqptcapacityEpgUsage1moTotalCapCum
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412990: fltTcaEqptcapacityEpgUsage1qtrTotalCapCum
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412991: fltTcaEqptcapacityEpgUsage1yearTotalCapCum
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412992: fltTcaEqptcapacityEpgUsage5minTotalCapPer
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412993: fltTcaEqptcapacityEpgUsage15minTotalCapPer
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412994: fltTcaEqptcapacityEpgUsage1hTotalCapPer
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412995: fltTcaEqptcapacityEpgUsage1dTotalCapPer
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412996: fltTcaEqptcapacityEpgUsage1wTotalCapPer
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412997: fltTcaEqptcapacityEpgUsage1moTotalCapPer
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412998: fltTcaEqptcapacityEpgUsage1qtrTotalCapPer
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F412999: fltTcaEqptcapacityEpgUsage1yearTotalCapPer
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4130: fltFvNwIssuesExtendedConfig-failed
Severity: minor
Explanation: This fault occurs when an End Point Group / End Point Security Group is incompletely or incorrectly configured.
- Look at the configuration for issues
- For multipodDirect-portState-mismatch issue, LLDP Oper state on the usage field of l1PhysIf is not set to 'direct-mpod'
- For FBR-route-not-present issue, add FBR route before configuring FBR member
- For further details, refer to the documentation for fv:NwIssuesExtended
- Verify the End Point Group configuration is correct and complete
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F413000: fltTcaEqptcapacityEpgUsage5minTotalCapMin
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413001: fltTcaEqptcapacityEpgUsage15minTotalCapMin
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413002: fltTcaEqptcapacityEpgUsage1hTotalCapMin
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413003: fltTcaEqptcapacityEpgUsage1dTotalCapMin
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413004: fltTcaEqptcapacityEpgUsage1wTotalCapMin
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413005: fltTcaEqptcapacityEpgUsage1moTotalCapMin
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413006: fltTcaEqptcapacityEpgUsage1qtrTotalCapMin
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413007: fltTcaEqptcapacityEpgUsage1yearTotalCapMin
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413008: fltTcaEqptcapacityEpgUsage5minTotalCapMax
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413009: fltTcaEqptcapacityEpgUsage15minTotalCapMax
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413010: fltTcaEqptcapacityEpgUsage1hTotalCapMax
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413011: fltTcaEqptcapacityEpgUsage1dTotalCapMax
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413012: fltTcaEqptcapacityEpgUsage1wTotalCapMax
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413013: fltTcaEqptcapacityEpgUsage1moTotalCapMax
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413014: fltTcaEqptcapacityEpgUsage1qtrTotalCapMax
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413015: fltTcaEqptcapacityEpgUsage1yearTotalCapMax
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413016: fltTcaEqptcapacityEpgUsage5minTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413017: fltTcaEqptcapacityEpgUsage15minTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413018: fltTcaEqptcapacityEpgUsage1hTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413019: fltTcaEqptcapacityEpgUsage1dTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413020: fltTcaEqptcapacityEpgUsage1wTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413021: fltTcaEqptcapacityEpgUsage1moTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413022: fltTcaEqptcapacityEpgUsage1qtrTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413023: fltTcaEqptcapacityEpgUsage1yearTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413048: fltTcaEqptcapacityEpgUsage5minTotalCapTr
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413049: fltTcaEqptcapacityEpgUsage15minTotalCapTr
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413050: fltTcaEqptcapacityEpgUsage1hTotalCapTr
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413051: fltTcaEqptcapacityEpgUsage1dTotalCapTr
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413052: fltTcaEqptcapacityEpgUsage1wTotalCapTr
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413053: fltTcaEqptcapacityEpgUsage1moTotalCapTr
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413054: fltTcaEqptcapacityEpgUsage1qtrTotalCapTr
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413055: fltTcaEqptcapacityEpgUsage1yearTotalCapTr
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413056: fltTcaEqptcapacityEpgUsage5minTotalCapRate
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413057: fltTcaEqptcapacityEpgUsage15minTotalCapRate
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413058: fltTcaEqptcapacityEpgUsage1hTotalCapRate
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413059: fltTcaEqptcapacityEpgUsage1dTotalCapRate
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413060: fltTcaEqptcapacityEpgUsage1wTotalCapRate
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413061: fltTcaEqptcapacityEpgUsage1moTotalCapRate
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413062: fltTcaEqptcapacityEpgUsage1qtrTotalCapRate
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413063: fltTcaEqptcapacityEpgUsage1yearTotalCapRate
Severity: variable
Explanation: This fault is caused by "Endpoint groups capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Endpoint groups capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413136: fltTcaEqptcapacityEpgUsage5minTotalLast
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413137: fltTcaEqptcapacityEpgUsage15minTotalLast
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413138: fltTcaEqptcapacityEpgUsage1hTotalLast
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413139: fltTcaEqptcapacityEpgUsage1dTotalLast
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413140: fltTcaEqptcapacityEpgUsage1wTotalLast
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413141: fltTcaEqptcapacityEpgUsage1moTotalLast
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413142: fltTcaEqptcapacityEpgUsage1qtrTotalLast
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413143: fltTcaEqptcapacityEpgUsage1yearTotalLast
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413152: fltTcaEqptcapacityEpgUsage5minTotalCum
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413153: fltTcaEqptcapacityEpgUsage15minTotalCum
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413154: fltTcaEqptcapacityEpgUsage1hTotalCum
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413155: fltTcaEqptcapacityEpgUsage1dTotalCum
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413156: fltTcaEqptcapacityEpgUsage1wTotalCum
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413157: fltTcaEqptcapacityEpgUsage1moTotalCum
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413158: fltTcaEqptcapacityEpgUsage1qtrTotalCum
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413159: fltTcaEqptcapacityEpgUsage1yearTotalCum
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413160: fltTcaEqptcapacityEpgUsage5minTotalPer
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413161: fltTcaEqptcapacityEpgUsage15minTotalPer
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413162: fltTcaEqptcapacityEpgUsage1hTotalPer
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413163: fltTcaEqptcapacityEpgUsage1dTotalPer
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413164: fltTcaEqptcapacityEpgUsage1wTotalPer
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413165: fltTcaEqptcapacityEpgUsage1moTotalPer
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413166: fltTcaEqptcapacityEpgUsage1qtrTotalPer
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413167: fltTcaEqptcapacityEpgUsage1yearTotalPer
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413168: fltTcaEqptcapacityEpgUsage5minTotalMin
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413169: fltTcaEqptcapacityEpgUsage15minTotalMin
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413170: fltTcaEqptcapacityEpgUsage1hTotalMin
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413171: fltTcaEqptcapacityEpgUsage1dTotalMin
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413172: fltTcaEqptcapacityEpgUsage1wTotalMin
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413173: fltTcaEqptcapacityEpgUsage1moTotalMin
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413174: fltTcaEqptcapacityEpgUsage1qtrTotalMin
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413175: fltTcaEqptcapacityEpgUsage1yearTotalMin
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413176: fltTcaEqptcapacityEpgUsage5minTotalMax
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413177: fltTcaEqptcapacityEpgUsage15minTotalMax
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413178: fltTcaEqptcapacityEpgUsage1hTotalMax
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413179: fltTcaEqptcapacityEpgUsage1dTotalMax
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413180: fltTcaEqptcapacityEpgUsage1wTotalMax
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413181: fltTcaEqptcapacityEpgUsage1moTotalMax
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413182: fltTcaEqptcapacityEpgUsage1qtrTotalMax
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413183: fltTcaEqptcapacityEpgUsage1yearTotalMax
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413184: fltTcaEqptcapacityEpgUsage5minTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413185: fltTcaEqptcapacityEpgUsage15minTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413186: fltTcaEqptcapacityEpgUsage1hTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413187: fltTcaEqptcapacityEpgUsage1dTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413188: fltTcaEqptcapacityEpgUsage1wTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413189: fltTcaEqptcapacityEpgUsage1moTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413190: fltTcaEqptcapacityEpgUsage1qtrTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413191: fltTcaEqptcapacityEpgUsage1yearTotalAvg
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413216: fltTcaEqptcapacityEpgUsage5minTotalTr
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413217: fltTcaEqptcapacityEpgUsage15minTotalTr
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413218: fltTcaEqptcapacityEpgUsage1hTotalTr
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413219: fltTcaEqptcapacityEpgUsage1dTotalTr
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413220: fltTcaEqptcapacityEpgUsage1wTotalTr
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413221: fltTcaEqptcapacityEpgUsage1moTotalTr
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413222: fltTcaEqptcapacityEpgUsage1qtrTotalTr
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413223: fltTcaEqptcapacityEpgUsage1yearTotalTr
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413224: fltTcaEqptcapacityEpgUsage5minTotalRate
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413225: fltTcaEqptcapacityEpgUsage15minTotalRate
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413226: fltTcaEqptcapacityEpgUsage1hTotalRate
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413227: fltTcaEqptcapacityEpgUsage1dTotalRate
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413228: fltTcaEqptcapacityEpgUsage1wTotalRate
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413229: fltTcaEqptcapacityEpgUsage1moTotalRate
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413230: fltTcaEqptcapacityEpgUsage1qtrTotalRate
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413231: fltTcaEqptcapacityEpgUsage1yearTotalRate
Severity: variable
Explanation: This fault is caused by "Total Endpoint groups rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total Endpoint groups" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4133: fltFvStCEpConfigurationError
Severity: major
Explanation: This fault occurs when a Static Endpoint (fvStCEp) Tag is not correctly configured.
- multiple-tag-selector-match: The configured Policy Tag(s) match more than one ESG TagSelctor when there is no pre-existing match. As a result, the endpoint is not classified into any ESGs because each endpoint can be associated to only one ESG TagSelector. Remove or update Policy Tag(s) (tagTag) or ESG TagSelctor (fvTagSelector) so that there is only one Policy Tag matching an ESG TagSelector for this endpoint.
- multiple-tag-selector-match-after-single-match: The configured Policy Tag(s) match more than one ESG TagSelctor after the endpoint was already classified to an ESG via a previously configured tag. As a result, the endpoint remains classified to the original ESG and the new Tag(s) matching other ESG TagSelectors will be ignored at the moment. Remove or update Policy Tag(s) (tagTag) or ESG TagSelctor (fvTagSelector) so that there is only one Policy Tag matching an ESG TagSelector for this endpoint.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F413304: fltTcaEqptcapacityPortUsage5minTotalCapLast
Severity: variable
Explanation: This fault is caused by "Physical ports capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413305: fltTcaEqptcapacityPortUsage15minTotalCapLast
Severity: variable
Explanation: This fault is caused by "Physical ports capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413306: fltTcaEqptcapacityPortUsage1hTotalCapLast
Severity: variable
Explanation: This fault is caused by "Physical ports capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413307: fltTcaEqptcapacityPortUsage1dTotalCapLast
Severity: variable
Explanation: This fault is caused by "Physical ports capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413308: fltTcaEqptcapacityPortUsage1wTotalCapLast
Severity: variable
Explanation: This fault is caused by "Physical ports capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413309: fltTcaEqptcapacityPortUsage1moTotalCapLast
Severity: variable
Explanation: This fault is caused by "Physical ports capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413310: fltTcaEqptcapacityPortUsage1qtrTotalCapLast
Severity: variable
Explanation: This fault is caused by "Physical ports capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413311: fltTcaEqptcapacityPortUsage1yearTotalCapLast
Severity: variable
Explanation: This fault is caused by "Physical ports capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413320: fltTcaEqptcapacityPortUsage5minTotalCapCum
Severity: variable
Explanation: This fault is caused by "Physical ports capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413321: fltTcaEqptcapacityPortUsage15minTotalCapCum
Severity: variable
Explanation: This fault is caused by "Physical ports capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413322: fltTcaEqptcapacityPortUsage1hTotalCapCum
Severity: variable
Explanation: This fault is caused by "Physical ports capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413323: fltTcaEqptcapacityPortUsage1dTotalCapCum
Severity: variable
Explanation: This fault is caused by "Physical ports capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413324: fltTcaEqptcapacityPortUsage1wTotalCapCum
Severity: variable
Explanation: This fault is caused by "Physical ports capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413325: fltTcaEqptcapacityPortUsage1moTotalCapCum
Severity: variable
Explanation: This fault is caused by "Physical ports capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413326: fltTcaEqptcapacityPortUsage1qtrTotalCapCum
Severity: variable
Explanation: This fault is caused by "Physical ports capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413327: fltTcaEqptcapacityPortUsage1yearTotalCapCum
Severity: variable
Explanation: This fault is caused by "Physical ports capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413328: fltTcaEqptcapacityPortUsage5minTotalCapPer
Severity: variable
Explanation: This fault is caused by "Physical ports capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413329: fltTcaEqptcapacityPortUsage15minTotalCapPer
Severity: variable
Explanation: This fault is caused by "Physical ports capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413330: fltTcaEqptcapacityPortUsage1hTotalCapPer
Severity: variable
Explanation: This fault is caused by "Physical ports capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413331: fltTcaEqptcapacityPortUsage1dTotalCapPer
Severity: variable
Explanation: This fault is caused by "Physical ports capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413332: fltTcaEqptcapacityPortUsage1wTotalCapPer
Severity: variable
Explanation: This fault is caused by "Physical ports capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413333: fltTcaEqptcapacityPortUsage1moTotalCapPer
Severity: variable
Explanation: This fault is caused by "Physical ports capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413334: fltTcaEqptcapacityPortUsage1qtrTotalCapPer
Severity: variable
Explanation: This fault is caused by "Physical ports capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413335: fltTcaEqptcapacityPortUsage1yearTotalCapPer
Severity: variable
Explanation: This fault is caused by "Physical ports capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413336: fltTcaEqptcapacityPortUsage5minTotalCapMin
Severity: variable
Explanation: This fault is caused by "Physical ports capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413337: fltTcaEqptcapacityPortUsage15minTotalCapMin
Severity: variable
Explanation: This fault is caused by "Physical ports capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413338: fltTcaEqptcapacityPortUsage1hTotalCapMin
Severity: variable
Explanation: This fault is caused by "Physical ports capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413339: fltTcaEqptcapacityPortUsage1dTotalCapMin
Severity: variable
Explanation: This fault is caused by "Physical ports capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413340: fltTcaEqptcapacityPortUsage1wTotalCapMin
Severity: variable
Explanation: This fault is caused by "Physical ports capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413341: fltTcaEqptcapacityPortUsage1moTotalCapMin
Severity: variable
Explanation: This fault is caused by "Physical ports capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413342: fltTcaEqptcapacityPortUsage1qtrTotalCapMin
Severity: variable
Explanation: This fault is caused by "Physical ports capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413343: fltTcaEqptcapacityPortUsage1yearTotalCapMin
Severity: variable
Explanation: This fault is caused by "Physical ports capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413344: fltTcaEqptcapacityPortUsage5minTotalCapMax
Severity: variable
Explanation: This fault is caused by "Physical ports capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413345: fltTcaEqptcapacityPortUsage15minTotalCapMax
Severity: variable
Explanation: This fault is caused by "Physical ports capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413346: fltTcaEqptcapacityPortUsage1hTotalCapMax
Severity: variable
Explanation: This fault is caused by "Physical ports capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413347: fltTcaEqptcapacityPortUsage1dTotalCapMax
Severity: variable
Explanation: This fault is caused by "Physical ports capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413348: fltTcaEqptcapacityPortUsage1wTotalCapMax
Severity: variable
Explanation: This fault is caused by "Physical ports capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413349: fltTcaEqptcapacityPortUsage1moTotalCapMax
Severity: variable
Explanation: This fault is caused by "Physical ports capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413350: fltTcaEqptcapacityPortUsage1qtrTotalCapMax
Severity: variable
Explanation: This fault is caused by "Physical ports capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413351: fltTcaEqptcapacityPortUsage1yearTotalCapMax
Severity: variable
Explanation: This fault is caused by "Physical ports capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413352: fltTcaEqptcapacityPortUsage5minTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Physical ports capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413353: fltTcaEqptcapacityPortUsage15minTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Physical ports capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413354: fltTcaEqptcapacityPortUsage1hTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Physical ports capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413355: fltTcaEqptcapacityPortUsage1dTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Physical ports capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413356: fltTcaEqptcapacityPortUsage1wTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Physical ports capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413357: fltTcaEqptcapacityPortUsage1moTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Physical ports capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413358: fltTcaEqptcapacityPortUsage1qtrTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Physical ports capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413359: fltTcaEqptcapacityPortUsage1yearTotalCapAvg
Severity: variable
Explanation: This fault is caused by "Physical ports capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413384: fltTcaEqptcapacityPortUsage5minTotalCapTr
Severity: variable
Explanation: This fault is caused by "Physical ports capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413385: fltTcaEqptcapacityPortUsage15minTotalCapTr
Severity: variable
Explanation: This fault is caused by "Physical ports capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413386: fltTcaEqptcapacityPortUsage1hTotalCapTr
Severity: variable
Explanation: This fault is caused by "Physical ports capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413387: fltTcaEqptcapacityPortUsage1dTotalCapTr
Severity: variable
Explanation: This fault is caused by "Physical ports capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413388: fltTcaEqptcapacityPortUsage1wTotalCapTr
Severity: variable
Explanation: This fault is caused by "Physical ports capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413389: fltTcaEqptcapacityPortUsage1moTotalCapTr
Severity: variable
Explanation: This fault is caused by "Physical ports capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413390: fltTcaEqptcapacityPortUsage1qtrTotalCapTr
Severity: variable
Explanation: This fault is caused by "Physical ports capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413391: fltTcaEqptcapacityPortUsage1yearTotalCapTr
Severity: variable
Explanation: This fault is caused by "Physical ports capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413392: fltTcaEqptcapacityPortUsage5minTotalCapRate
Severity: variable
Explanation: This fault is caused by "Physical ports capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413393: fltTcaEqptcapacityPortUsage15minTotalCapRate
Severity: variable
Explanation: This fault is caused by "Physical ports capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413394: fltTcaEqptcapacityPortUsage1hTotalCapRate
Severity: variable
Explanation: This fault is caused by "Physical ports capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413395: fltTcaEqptcapacityPortUsage1dTotalCapRate
Severity: variable
Explanation: This fault is caused by "Physical ports capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413396: fltTcaEqptcapacityPortUsage1wTotalCapRate
Severity: variable
Explanation: This fault is caused by "Physical ports capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413397: fltTcaEqptcapacityPortUsage1moTotalCapRate
Severity: variable
Explanation: This fault is caused by "Physical ports capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413398: fltTcaEqptcapacityPortUsage1qtrTotalCapRate
Severity: variable
Explanation: This fault is caused by "Physical ports capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413399: fltTcaEqptcapacityPortUsage1yearTotalCapRate
Severity: variable
Explanation: This fault is caused by "Physical ports capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Physical ports capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4134: fltFvEpMacTagConfigurationError
Severity: major
Explanation: This fault occurs when an Endpoint (fvEpMacTag) Tag is not correctly configured.
- multiple-tag-selector-match: The configured Policy Tag(s) match more than one ESG TagSelctor when there is no pre-existing match. As a result, the endpoint is not classified into any ESGs because each endpoint can be associated to only one ESG TagSelector. Remove or update Policy Tag(s) (tagTag) or ESG TagSelctor (fvTagSelector) so that there is only one Policy Tag matching an ESG TagSelector for this endpoint.
- multiple-tag-selector-match-after-single-match: The configured Policy Tag(s) match more than one ESG TagSelctor after the endpoint was already classified to an ESG via a previously configured tag. As a result, the endpoint remains classified to the original ESG and the new Tag(s) matching other ESG TagSelectors will be ignored at the moment. Remove or update Policy Tag(s) (tagTag) or ESG TagSelctor (fvTagSelector) so that there is only one Policy Tag matching an ESG TagSelector for this endpoint.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F413472: fltTcaEqptcapacityPortUsage5minTotalLast
Severity: variable
Explanation: This fault is caused by "Total physical ports used current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413473: fltTcaEqptcapacityPortUsage15minTotalLast
Severity: variable
Explanation: This fault is caused by "Total physical ports used current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413474: fltTcaEqptcapacityPortUsage1hTotalLast
Severity: variable
Explanation: This fault is caused by "Total physical ports used current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413475: fltTcaEqptcapacityPortUsage1dTotalLast
Severity: variable
Explanation: This fault is caused by "Total physical ports used current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413476: fltTcaEqptcapacityPortUsage1wTotalLast
Severity: variable
Explanation: This fault is caused by "Total physical ports used current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413477: fltTcaEqptcapacityPortUsage1moTotalLast
Severity: variable
Explanation: This fault is caused by "Total physical ports used current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413478: fltTcaEqptcapacityPortUsage1qtrTotalLast
Severity: variable
Explanation: This fault is caused by "Total physical ports used current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413479: fltTcaEqptcapacityPortUsage1yearTotalLast
Severity: variable
Explanation: This fault is caused by "Total physical ports used current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413488: fltTcaEqptcapacityPortUsage5minTotalCum
Severity: variable
Explanation: This fault is caused by "Total physical ports used cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413489: fltTcaEqptcapacityPortUsage15minTotalCum
Severity: variable
Explanation: This fault is caused by "Total physical ports used cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413490: fltTcaEqptcapacityPortUsage1hTotalCum
Severity: variable
Explanation: This fault is caused by "Total physical ports used cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413491: fltTcaEqptcapacityPortUsage1dTotalCum
Severity: variable
Explanation: This fault is caused by "Total physical ports used cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413492: fltTcaEqptcapacityPortUsage1wTotalCum
Severity: variable
Explanation: This fault is caused by "Total physical ports used cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413493: fltTcaEqptcapacityPortUsage1moTotalCum
Severity: variable
Explanation: This fault is caused by "Total physical ports used cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413494: fltTcaEqptcapacityPortUsage1qtrTotalCum
Severity: variable
Explanation: This fault is caused by "Total physical ports used cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413495: fltTcaEqptcapacityPortUsage1yearTotalCum
Severity: variable
Explanation: This fault is caused by "Total physical ports used cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413496: fltTcaEqptcapacityPortUsage5minTotalPer
Severity: variable
Explanation: This fault is caused by "Total physical ports used periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413497: fltTcaEqptcapacityPortUsage15minTotalPer
Severity: variable
Explanation: This fault is caused by "Total physical ports used periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413498: fltTcaEqptcapacityPortUsage1hTotalPer
Severity: variable
Explanation: This fault is caused by "Total physical ports used periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413499: fltTcaEqptcapacityPortUsage1dTotalPer
Severity: variable
Explanation: This fault is caused by "Total physical ports used periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4135: fltFvEpIpTagConfigurationError
Severity: major
Explanation: This fault occurs when an Endpoint (fvEpIpTag) Tag is not correctly configured.
- multiple-tag-selector-match: The configured Policy Tag(s) match more than one ESG TagSelctor when there is no pre-existing match. As a result, the endpoint is not classified into any ESGs because each endpoint can be associated to only one ESG TagSelector. Remove or update Policy Tag(s) (tagTag) or ESG TagSelctor (fvTagSelector) so that there is only one Policy Tag matching an ESG TagSelector for this endpoint.
- multiple-tag-selector-match-after-single-match: The configured Policy Tag(s) match more than one ESG TagSelctor after the endpoint was already classified to an ESG via a previously configured tag. As a result, the endpoint remains classified to the original ESG and the new Tag(s) matching other ESG TagSelectors will be ignored at the moment. Remove or update Policy Tag(s) (tagTag) or ESG TagSelctor (fvTagSelector) so that there is only one Policy Tag matching an ESG TagSelector for this endpoint.
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F413500: fltTcaEqptcapacityPortUsage1wTotalPer
Severity: variable
Explanation: This fault is caused by "Total physical ports used periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413501: fltTcaEqptcapacityPortUsage1moTotalPer
Severity: variable
Explanation: This fault is caused by "Total physical ports used periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413502: fltTcaEqptcapacityPortUsage1qtrTotalPer
Severity: variable
Explanation: This fault is caused by "Total physical ports used periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413503: fltTcaEqptcapacityPortUsage1yearTotalPer
Severity: variable
Explanation: This fault is caused by "Total physical ports used periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413504: fltTcaEqptcapacityPortUsage5minTotalMin
Severity: variable
Explanation: This fault is caused by "Total physical ports used minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413505: fltTcaEqptcapacityPortUsage15minTotalMin
Severity: variable
Explanation: This fault is caused by "Total physical ports used minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413506: fltTcaEqptcapacityPortUsage1hTotalMin
Severity: variable
Explanation: This fault is caused by "Total physical ports used minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413507: fltTcaEqptcapacityPortUsage1dTotalMin
Severity: variable
Explanation: This fault is caused by "Total physical ports used minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413508: fltTcaEqptcapacityPortUsage1wTotalMin
Severity: variable
Explanation: This fault is caused by "Total physical ports used minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413509: fltTcaEqptcapacityPortUsage1moTotalMin
Severity: variable
Explanation: This fault is caused by "Total physical ports used minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413510: fltTcaEqptcapacityPortUsage1qtrTotalMin
Severity: variable
Explanation: This fault is caused by "Total physical ports used minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413511: fltTcaEqptcapacityPortUsage1yearTotalMin
Severity: variable
Explanation: This fault is caused by "Total physical ports used minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413512: fltTcaEqptcapacityPortUsage5minTotalMax
Severity: variable
Explanation: This fault is caused by "Total physical ports used maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413513: fltTcaEqptcapacityPortUsage15minTotalMax
Severity: variable
Explanation: This fault is caused by "Total physical ports used maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413514: fltTcaEqptcapacityPortUsage1hTotalMax
Severity: variable
Explanation: This fault is caused by "Total physical ports used maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413515: fltTcaEqptcapacityPortUsage1dTotalMax
Severity: variable
Explanation: This fault is caused by "Total physical ports used maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413516: fltTcaEqptcapacityPortUsage1wTotalMax
Severity: variable
Explanation: This fault is caused by "Total physical ports used maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413517: fltTcaEqptcapacityPortUsage1moTotalMax
Severity: variable
Explanation: This fault is caused by "Total physical ports used maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413518: fltTcaEqptcapacityPortUsage1qtrTotalMax
Severity: variable
Explanation: This fault is caused by "Total physical ports used maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413519: fltTcaEqptcapacityPortUsage1yearTotalMax
Severity: variable
Explanation: This fault is caused by "Total physical ports used maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413520: fltTcaEqptcapacityPortUsage5minTotalAvg
Severity: variable
Explanation: This fault is caused by "Total physical ports used average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413521: fltTcaEqptcapacityPortUsage15minTotalAvg
Severity: variable
Explanation: This fault is caused by "Total physical ports used average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413522: fltTcaEqptcapacityPortUsage1hTotalAvg
Severity: variable
Explanation: This fault is caused by "Total physical ports used average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413523: fltTcaEqptcapacityPortUsage1dTotalAvg
Severity: variable
Explanation: This fault is caused by "Total physical ports used average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413524: fltTcaEqptcapacityPortUsage1wTotalAvg
Severity: variable
Explanation: This fault is caused by "Total physical ports used average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413525: fltTcaEqptcapacityPortUsage1moTotalAvg
Severity: variable
Explanation: This fault is caused by "Total physical ports used average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413526: fltTcaEqptcapacityPortUsage1qtrTotalAvg
Severity: variable
Explanation: This fault is caused by "Total physical ports used average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413527: fltTcaEqptcapacityPortUsage1yearTotalAvg
Severity: variable
Explanation: This fault is caused by "Total physical ports used average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413552: fltTcaEqptcapacityPortUsage5minTotalTr
Severity: variable
Explanation: This fault is caused by "Total physical ports used trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413553: fltTcaEqptcapacityPortUsage15minTotalTr
Severity: variable
Explanation: This fault is caused by "Total physical ports used trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413554: fltTcaEqptcapacityPortUsage1hTotalTr
Severity: variable
Explanation: This fault is caused by "Total physical ports used trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413555: fltTcaEqptcapacityPortUsage1dTotalTr
Severity: variable
Explanation: This fault is caused by "Total physical ports used trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413556: fltTcaEqptcapacityPortUsage1wTotalTr
Severity: variable
Explanation: This fault is caused by "Total physical ports used trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413557: fltTcaEqptcapacityPortUsage1moTotalTr
Severity: variable
Explanation: This fault is caused by "Total physical ports used trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413558: fltTcaEqptcapacityPortUsage1qtrTotalTr
Severity: variable
Explanation: This fault is caused by "Total physical ports used trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413559: fltTcaEqptcapacityPortUsage1yearTotalTr
Severity: variable
Explanation: This fault is caused by "Total physical ports used trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413560: fltTcaEqptcapacityPortUsage5minTotalRate
Severity: variable
Explanation: This fault is caused by "Total physical ports used rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413561: fltTcaEqptcapacityPortUsage15minTotalRate
Severity: variable
Explanation: This fault is caused by "Total physical ports used rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413562: fltTcaEqptcapacityPortUsage1hTotalRate
Severity: variable
Explanation: This fault is caused by "Total physical ports used rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413563: fltTcaEqptcapacityPortUsage1dTotalRate
Severity: variable
Explanation: This fault is caused by "Total physical ports used rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413564: fltTcaEqptcapacityPortUsage1wTotalRate
Severity: variable
Explanation: This fault is caused by "Total physical ports used rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413565: fltTcaEqptcapacityPortUsage1moTotalRate
Severity: variable
Explanation: This fault is caused by "Total physical ports used rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413566: fltTcaEqptcapacityPortUsage1qtrTotalRate
Severity: variable
Explanation: This fault is caused by "Total physical ports used rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413567: fltTcaEqptcapacityPortUsage1yearTotalRate
Severity: variable
Explanation: This fault is caused by "Total physical ports used rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total physical ports used" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4136: fltHinventoryRsAcctToFolderResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F413640: fltTcaEqptcapacityVrfUsage5minTotalCapLast
Severity: variable
Explanation: This fault is caused by "VRF entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413641: fltTcaEqptcapacityVrfUsage15minTotalCapLast
Severity: variable
Explanation: This fault is caused by "VRF entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413642: fltTcaEqptcapacityVrfUsage1hTotalCapLast
Severity: variable
Explanation: This fault is caused by "VRF entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413643: fltTcaEqptcapacityVrfUsage1dTotalCapLast
Severity: variable
Explanation: This fault is caused by "VRF entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413644: fltTcaEqptcapacityVrfUsage1wTotalCapLast
Severity: variable
Explanation: This fault is caused by "VRF entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413645: fltTcaEqptcapacityVrfUsage1moTotalCapLast
Severity: variable
Explanation: This fault is caused by "VRF entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413646: fltTcaEqptcapacityVrfUsage1qtrTotalCapLast
Severity: variable
Explanation: This fault is caused by "VRF entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413647: fltTcaEqptcapacityVrfUsage1yearTotalCapLast
Severity: variable
Explanation: This fault is caused by "VRF entries capacity current value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413656: fltTcaEqptcapacityVrfUsage5minTotalCapCum
Severity: variable
Explanation: This fault is caused by "VRF entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413657: fltTcaEqptcapacityVrfUsage15minTotalCapCum
Severity: variable
Explanation: This fault is caused by "VRF entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413658: fltTcaEqptcapacityVrfUsage1hTotalCapCum
Severity: variable
Explanation: This fault is caused by "VRF entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413659: fltTcaEqptcapacityVrfUsage1dTotalCapCum
Severity: variable
Explanation: This fault is caused by "VRF entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413660: fltTcaEqptcapacityVrfUsage1wTotalCapCum
Severity: variable
Explanation: This fault is caused by "VRF entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413661: fltTcaEqptcapacityVrfUsage1moTotalCapCum
Severity: variable
Explanation: This fault is caused by "VRF entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413662: fltTcaEqptcapacityVrfUsage1qtrTotalCapCum
Severity: variable
Explanation: This fault is caused by "VRF entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413663: fltTcaEqptcapacityVrfUsage1yearTotalCapCum
Severity: variable
Explanation: This fault is caused by "VRF entries capacity cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413664: fltTcaEqptcapacityVrfUsage5minTotalCapPer
Severity: variable
Explanation: This fault is caused by "VRF entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413665: fltTcaEqptcapacityVrfUsage15minTotalCapPer
Severity: variable
Explanation: This fault is caused by "VRF entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413666: fltTcaEqptcapacityVrfUsage1hTotalCapPer
Severity: variable
Explanation: This fault is caused by "VRF entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413667: fltTcaEqptcapacityVrfUsage1dTotalCapPer
Severity: variable
Explanation: This fault is caused by "VRF entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413668: fltTcaEqptcapacityVrfUsage1wTotalCapPer
Severity: variable
Explanation: This fault is caused by "VRF entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413669: fltTcaEqptcapacityVrfUsage1moTotalCapPer
Severity: variable
Explanation: This fault is caused by "VRF entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413670: fltTcaEqptcapacityVrfUsage1qtrTotalCapPer
Severity: variable
Explanation: This fault is caused by "VRF entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413671: fltTcaEqptcapacityVrfUsage1yearTotalCapPer
Severity: variable
Explanation: This fault is caused by "VRF entries capacity periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413672: fltTcaEqptcapacityVrfUsage5minTotalCapMin
Severity: variable
Explanation: This fault is caused by "VRF entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413673: fltTcaEqptcapacityVrfUsage15minTotalCapMin
Severity: variable
Explanation: This fault is caused by "VRF entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413674: fltTcaEqptcapacityVrfUsage1hTotalCapMin
Severity: variable
Explanation: This fault is caused by "VRF entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413675: fltTcaEqptcapacityVrfUsage1dTotalCapMin
Severity: variable
Explanation: This fault is caused by "VRF entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413676: fltTcaEqptcapacityVrfUsage1wTotalCapMin
Severity: variable
Explanation: This fault is caused by "VRF entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413677: fltTcaEqptcapacityVrfUsage1moTotalCapMin
Severity: variable
Explanation: This fault is caused by "VRF entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413678: fltTcaEqptcapacityVrfUsage1qtrTotalCapMin
Severity: variable
Explanation: This fault is caused by "VRF entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413679: fltTcaEqptcapacityVrfUsage1yearTotalCapMin
Severity: variable
Explanation: This fault is caused by "VRF entries capacity minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413680: fltTcaEqptcapacityVrfUsage5minTotalCapMax
Severity: variable
Explanation: This fault is caused by "VRF entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413681: fltTcaEqptcapacityVrfUsage15minTotalCapMax
Severity: variable
Explanation: This fault is caused by "VRF entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413682: fltTcaEqptcapacityVrfUsage1hTotalCapMax
Severity: variable
Explanation: This fault is caused by "VRF entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413683: fltTcaEqptcapacityVrfUsage1dTotalCapMax
Severity: variable
Explanation: This fault is caused by "VRF entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413684: fltTcaEqptcapacityVrfUsage1wTotalCapMax
Severity: variable
Explanation: This fault is caused by "VRF entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413685: fltTcaEqptcapacityVrfUsage1moTotalCapMax
Severity: variable
Explanation: This fault is caused by "VRF entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413686: fltTcaEqptcapacityVrfUsage1qtrTotalCapMax
Severity: variable
Explanation: This fault is caused by "VRF entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413687: fltTcaEqptcapacityVrfUsage1yearTotalCapMax
Severity: variable
Explanation: This fault is caused by "VRF entries capacity maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413688: fltTcaEqptcapacityVrfUsage5minTotalCapAvg
Severity: variable
Explanation: This fault is caused by "VRF entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413689: fltTcaEqptcapacityVrfUsage15minTotalCapAvg
Severity: variable
Explanation: This fault is caused by "VRF entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413690: fltTcaEqptcapacityVrfUsage1hTotalCapAvg
Severity: variable
Explanation: This fault is caused by "VRF entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413691: fltTcaEqptcapacityVrfUsage1dTotalCapAvg
Severity: variable
Explanation: This fault is caused by "VRF entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413692: fltTcaEqptcapacityVrfUsage1wTotalCapAvg
Severity: variable
Explanation: This fault is caused by "VRF entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413693: fltTcaEqptcapacityVrfUsage1moTotalCapAvg
Severity: variable
Explanation: This fault is caused by "VRF entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413694: fltTcaEqptcapacityVrfUsage1qtrTotalCapAvg
Severity: variable
Explanation: This fault is caused by "VRF entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413695: fltTcaEqptcapacityVrfUsage1yearTotalCapAvg
Severity: variable
Explanation: This fault is caused by "VRF entries capacity average value" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413720: fltTcaEqptcapacityVrfUsage5minTotalCapTr
Severity: variable
Explanation: This fault is caused by "VRF entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413721: fltTcaEqptcapacityVrfUsage15minTotalCapTr
Severity: variable
Explanation: This fault is caused by "VRF entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413722: fltTcaEqptcapacityVrfUsage1hTotalCapTr
Severity: variable
Explanation: This fault is caused by "VRF entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413723: fltTcaEqptcapacityVrfUsage1dTotalCapTr
Severity: variable
Explanation: This fault is caused by "VRF entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413724: fltTcaEqptcapacityVrfUsage1wTotalCapTr
Severity: variable
Explanation: This fault is caused by "VRF entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413725: fltTcaEqptcapacityVrfUsage1moTotalCapTr
Severity: variable
Explanation: This fault is caused by "VRF entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413726: fltTcaEqptcapacityVrfUsage1qtrTotalCapTr
Severity: variable
Explanation: This fault is caused by "VRF entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413727: fltTcaEqptcapacityVrfUsage1yearTotalCapTr
Severity: variable
Explanation: This fault is caused by "VRF entries capacity trend" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413728: fltTcaEqptcapacityVrfUsage5minTotalCapRate
Severity: variable
Explanation: This fault is caused by "VRF entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413729: fltTcaEqptcapacityVrfUsage15minTotalCapRate
Severity: variable
Explanation: This fault is caused by "VRF entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413730: fltTcaEqptcapacityVrfUsage1hTotalCapRate
Severity: variable
Explanation: This fault is caused by "VRF entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413731: fltTcaEqptcapacityVrfUsage1dTotalCapRate
Severity: variable
Explanation: This fault is caused by "VRF entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413732: fltTcaEqptcapacityVrfUsage1wTotalCapRate
Severity: variable
Explanation: This fault is caused by "VRF entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413733: fltTcaEqptcapacityVrfUsage1moTotalCapRate
Severity: variable
Explanation: This fault is caused by "VRF entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413734: fltTcaEqptcapacityVrfUsage1qtrTotalCapRate
Severity: variable
Explanation: This fault is caused by "VRF entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413735: fltTcaEqptcapacityVrfUsage1yearTotalCapRate
Severity: variable
Explanation: This fault is caused by "VRF entries capacity rate" statistical property crossing threshold level.
Recommended Action: Check the values of "VRF entries capacity" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413808: fltTcaEqptcapacityVrfUsage5minTotalLast
Severity: variable
Explanation: This fault is caused by "Total VRF entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413809: fltTcaEqptcapacityVrfUsage15minTotalLast
Severity: variable
Explanation: This fault is caused by "Total VRF entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413810: fltTcaEqptcapacityVrfUsage1hTotalLast
Severity: variable
Explanation: This fault is caused by "Total VRF entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413811: fltTcaEqptcapacityVrfUsage1dTotalLast
Severity: variable
Explanation: This fault is caused by "Total VRF entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413812: fltTcaEqptcapacityVrfUsage1wTotalLast
Severity: variable
Explanation: This fault is caused by "Total VRF entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413813: fltTcaEqptcapacityVrfUsage1moTotalLast
Severity: variable
Explanation: This fault is caused by "Total VRF entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413814: fltTcaEqptcapacityVrfUsage1qtrTotalLast
Severity: variable
Explanation: This fault is caused by "Total VRF entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413815: fltTcaEqptcapacityVrfUsage1yearTotalLast
Severity: variable
Explanation: This fault is caused by "Total VRF entries current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413824: fltTcaEqptcapacityVrfUsage5minTotalCum
Severity: variable
Explanation: This fault is caused by "Total VRF entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413825: fltTcaEqptcapacityVrfUsage15minTotalCum
Severity: variable
Explanation: This fault is caused by "Total VRF entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413826: fltTcaEqptcapacityVrfUsage1hTotalCum
Severity: variable
Explanation: This fault is caused by "Total VRF entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413827: fltTcaEqptcapacityVrfUsage1dTotalCum
Severity: variable
Explanation: This fault is caused by "Total VRF entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413828: fltTcaEqptcapacityVrfUsage1wTotalCum
Severity: variable
Explanation: This fault is caused by "Total VRF entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413829: fltTcaEqptcapacityVrfUsage1moTotalCum
Severity: variable
Explanation: This fault is caused by "Total VRF entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413830: fltTcaEqptcapacityVrfUsage1qtrTotalCum
Severity: variable
Explanation: This fault is caused by "Total VRF entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413831: fltTcaEqptcapacityVrfUsage1yearTotalCum
Severity: variable
Explanation: This fault is caused by "Total VRF entries cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413832: fltTcaEqptcapacityVrfUsage5minTotalPer
Severity: variable
Explanation: This fault is caused by "Total VRF entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413833: fltTcaEqptcapacityVrfUsage15minTotalPer
Severity: variable
Explanation: This fault is caused by "Total VRF entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413834: fltTcaEqptcapacityVrfUsage1hTotalPer
Severity: variable
Explanation: This fault is caused by "Total VRF entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413835: fltTcaEqptcapacityVrfUsage1dTotalPer
Severity: variable
Explanation: This fault is caused by "Total VRF entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413836: fltTcaEqptcapacityVrfUsage1wTotalPer
Severity: variable
Explanation: This fault is caused by "Total VRF entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413837: fltTcaEqptcapacityVrfUsage1moTotalPer
Severity: variable
Explanation: This fault is caused by "Total VRF entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413838: fltTcaEqptcapacityVrfUsage1qtrTotalPer
Severity: variable
Explanation: This fault is caused by "Total VRF entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413839: fltTcaEqptcapacityVrfUsage1yearTotalPer
Severity: variable
Explanation: This fault is caused by "Total VRF entries periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413840: fltTcaEqptcapacityVrfUsage5minTotalMin
Severity: variable
Explanation: This fault is caused by "Total VRF entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413841: fltTcaEqptcapacityVrfUsage15minTotalMin
Severity: variable
Explanation: This fault is caused by "Total VRF entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413842: fltTcaEqptcapacityVrfUsage1hTotalMin
Severity: variable
Explanation: This fault is caused by "Total VRF entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413843: fltTcaEqptcapacityVrfUsage1dTotalMin
Severity: variable
Explanation: This fault is caused by "Total VRF entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413844: fltTcaEqptcapacityVrfUsage1wTotalMin
Severity: variable
Explanation: This fault is caused by "Total VRF entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413845: fltTcaEqptcapacityVrfUsage1moTotalMin
Severity: variable
Explanation: This fault is caused by "Total VRF entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413846: fltTcaEqptcapacityVrfUsage1qtrTotalMin
Severity: variable
Explanation: This fault is caused by "Total VRF entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413847: fltTcaEqptcapacityVrfUsage1yearTotalMin
Severity: variable
Explanation: This fault is caused by "Total VRF entries minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413848: fltTcaEqptcapacityVrfUsage5minTotalMax
Severity: variable
Explanation: This fault is caused by "Total VRF entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413849: fltTcaEqptcapacityVrfUsage15minTotalMax
Severity: variable
Explanation: This fault is caused by "Total VRF entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413850: fltTcaEqptcapacityVrfUsage1hTotalMax
Severity: variable
Explanation: This fault is caused by "Total VRF entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413851: fltTcaEqptcapacityVrfUsage1dTotalMax
Severity: variable
Explanation: This fault is caused by "Total VRF entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413852: fltTcaEqptcapacityVrfUsage1wTotalMax
Severity: variable
Explanation: This fault is caused by "Total VRF entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413853: fltTcaEqptcapacityVrfUsage1moTotalMax
Severity: variable
Explanation: This fault is caused by "Total VRF entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413854: fltTcaEqptcapacityVrfUsage1qtrTotalMax
Severity: variable
Explanation: This fault is caused by "Total VRF entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413855: fltTcaEqptcapacityVrfUsage1yearTotalMax
Severity: variable
Explanation: This fault is caused by "Total VRF entries maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413856: fltTcaEqptcapacityVrfUsage5minTotalAvg
Severity: variable
Explanation: This fault is caused by "Total VRF entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413857: fltTcaEqptcapacityVrfUsage15minTotalAvg
Severity: variable
Explanation: This fault is caused by "Total VRF entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413858: fltTcaEqptcapacityVrfUsage1hTotalAvg
Severity: variable
Explanation: This fault is caused by "Total VRF entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413859: fltTcaEqptcapacityVrfUsage1dTotalAvg
Severity: variable
Explanation: This fault is caused by "Total VRF entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413860: fltTcaEqptcapacityVrfUsage1wTotalAvg
Severity: variable
Explanation: This fault is caused by "Total VRF entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413861: fltTcaEqptcapacityVrfUsage1moTotalAvg
Severity: variable
Explanation: This fault is caused by "Total VRF entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413862: fltTcaEqptcapacityVrfUsage1qtrTotalAvg
Severity: variable
Explanation: This fault is caused by "Total VRF entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413863: fltTcaEqptcapacityVrfUsage1yearTotalAvg
Severity: variable
Explanation: This fault is caused by "Total VRF entries average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413888: fltTcaEqptcapacityVrfUsage5minTotalTr
Severity: variable
Explanation: This fault is caused by "Total VRF entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413889: fltTcaEqptcapacityVrfUsage15minTotalTr
Severity: variable
Explanation: This fault is caused by "Total VRF entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413890: fltTcaEqptcapacityVrfUsage1hTotalTr
Severity: variable
Explanation: This fault is caused by "Total VRF entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413891: fltTcaEqptcapacityVrfUsage1dTotalTr
Severity: variable
Explanation: This fault is caused by "Total VRF entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413892: fltTcaEqptcapacityVrfUsage1wTotalTr
Severity: variable
Explanation: This fault is caused by "Total VRF entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413893: fltTcaEqptcapacityVrfUsage1moTotalTr
Severity: variable
Explanation: This fault is caused by "Total VRF entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413894: fltTcaEqptcapacityVrfUsage1qtrTotalTr
Severity: variable
Explanation: This fault is caused by "Total VRF entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413895: fltTcaEqptcapacityVrfUsage1yearTotalTr
Severity: variable
Explanation: This fault is caused by "Total VRF entries trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413896: fltTcaEqptcapacityVrfUsage5minTotalRate
Severity: variable
Explanation: This fault is caused by "Total VRF entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413897: fltTcaEqptcapacityVrfUsage15minTotalRate
Severity: variable
Explanation: This fault is caused by "Total VRF entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413898: fltTcaEqptcapacityVrfUsage1hTotalRate
Severity: variable
Explanation: This fault is caused by "Total VRF entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413899: fltTcaEqptcapacityVrfUsage1dTotalRate
Severity: variable
Explanation: This fault is caused by "Total VRF entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413900: fltTcaEqptcapacityVrfUsage1wTotalRate
Severity: variable
Explanation: This fault is caused by "Total VRF entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413901: fltTcaEqptcapacityVrfUsage1moTotalRate
Severity: variable
Explanation: This fault is caused by "Total VRF entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413902: fltTcaEqptcapacityVrfUsage1qtrTotalRate
Severity: variable
Explanation: This fault is caused by "Total VRF entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F413903: fltTcaEqptcapacityVrfUsage1yearTotalRate
Severity: variable
Explanation: This fault is caused by "Total VRF entries rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Total VRF entries" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4140: fltDhcpDiscoveryHealthDhcpPoolOwnershipCheckFailed
Severity: major
Explanation: This fault is raised when there are more than one APIC as owners for a dhcp pool
- Collect a tech-support file and contact Cisco TAC.
F4141: fltDhcpDiscoveryHealthDhcpClientLeaseCheckFailed
Severity: warning
Explanation: This fault is raised when there is dhcp client without a lease
- Collect a tech-support file and contact Cisco TAC.
F4142: fltDhcpDiscoveryHealthDhcpIPPoolIdAssignerMismatch
Severity: warning
Explanation: This fault is raised when there is a dhcp pool ip assigner id mismatch in fnv and idmgr
- Collect a tech-support file and contact Cisco TAC.
F4143: fltDhcpDiscoveryHealthDhcpClientZeroNodeId
Severity: warning
Explanation: This fault is raised when there is a dhcp client with node id 0 with valid ip
- Collect a tech-support file and contact Cisco TAC.
F4144: fltDhcpDiscoveryHealthDhcpdFnvUnSync
Severity: major
Explanation: This fault is raised when dhcp client and pool are not in sync with fnv data
- Collect a tech-support file and contact Cisco TAC.
F4146: fltPatchingPatchPatchingCfgCtrl
Severity: warning
Explanation: This fault is caused by a hardware programming failure
Recommended Action: The system will periodically retry to program the hardware. If the failure is due to lack of hardware resources, free up resources by removing or simplifying existing configuration. One of the reasons for lack of hardware resources is exhaustion of VLANs in ToR. These hardware resources can be examined by looking at capacity dashboard under OPERATIONS tab. Please check entry against the number of VLANs in output of command show vlan summary issued at node where fault is generated to check whether it exceeds above advertised node capacity.
F4148: fltEqptCardOperStChange
Severity: minor
Explanation: LC/FM in failed state
- Reload LC/FM
- If the above action did not resolve the issue, collect tech-support and contact Cisco TAC
F4149: fltEqptSlotOperStChange
Severity: minor
Explanation: This fault occurs when you remove LC/FM/SUP/SC from the slot
- Insert the card back in the slot
- If the above action did not resolve the issue, collect tech-support and contact Cisco TAC
F4154: fltSynceInstPlatformSupportFault
Severity: major
Explanation: This fault occurs when the syncE feature is enabled on unsupported platform.
Recommended Action: To recover from this fault, enable feature only on supported platform.
F4155: fltSynceEthIfQlFault
Severity: major
Explanation: This fault occurs when the QL option config on interface differs with QL option config at node level
Recommended Action: To recover from this fault, make sure to have same QL option config on both interface and node level
F4156: fltApPluginAppValidationDeferred
Severity: minor
Explanation: Application validation deferred.
Recommended Action: APP validation keeps getting retried until all the information needed to validate an App image are available. Please raise a TAC case only if this fault does not get cleared within one hour.
F4158: fltInfraRsPtpInstPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F4159: fltCloudRsGatewayRouterPToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F415944: fltTcaBgpPeerBytes5minByteInRecvQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415945: fltTcaBgpPeerBytes15minByteInRecvQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415946: fltTcaBgpPeerBytes1hByteInRecvQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415947: fltTcaBgpPeerBytes1dByteInRecvQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415948: fltTcaBgpPeerBytes1wByteInRecvQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415949: fltTcaBgpPeerBytes1moByteInRecvQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415950: fltTcaBgpPeerBytes1qtrByteInRecvQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415951: fltTcaBgpPeerBytes1yearByteInRecvQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415960: fltTcaBgpPeerBytes5minByteInRecvQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415961: fltTcaBgpPeerBytes15minByteInRecvQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415962: fltTcaBgpPeerBytes1hByteInRecvQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415963: fltTcaBgpPeerBytes1dByteInRecvQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415964: fltTcaBgpPeerBytes1wByteInRecvQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415965: fltTcaBgpPeerBytes1moByteInRecvQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415966: fltTcaBgpPeerBytes1qtrByteInRecvQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415967: fltTcaBgpPeerBytes1yearByteInRecvQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415968: fltTcaBgpPeerBytes5minByteInRecvQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415969: fltTcaBgpPeerBytes15minByteInRecvQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415970: fltTcaBgpPeerBytes1hByteInRecvQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415971: fltTcaBgpPeerBytes1dByteInRecvQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415972: fltTcaBgpPeerBytes1wByteInRecvQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415973: fltTcaBgpPeerBytes1moByteInRecvQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415974: fltTcaBgpPeerBytes1qtrByteInRecvQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415975: fltTcaBgpPeerBytes1yearByteInRecvQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415976: fltTcaBgpPeerBytes5minByteInRecvQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415977: fltTcaBgpPeerBytes15minByteInRecvQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415978: fltTcaBgpPeerBytes1hByteInRecvQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415979: fltTcaBgpPeerBytes1dByteInRecvQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415980: fltTcaBgpPeerBytes1wByteInRecvQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415981: fltTcaBgpPeerBytes1moByteInRecvQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415982: fltTcaBgpPeerBytes1qtrByteInRecvQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415983: fltTcaBgpPeerBytes1yearByteInRecvQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415984: fltTcaBgpPeerBytes5minByteInRecvQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415985: fltTcaBgpPeerBytes15minByteInRecvQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415986: fltTcaBgpPeerBytes1hByteInRecvQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415987: fltTcaBgpPeerBytes1dByteInRecvQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415988: fltTcaBgpPeerBytes1wByteInRecvQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415989: fltTcaBgpPeerBytes1moByteInRecvQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415990: fltTcaBgpPeerBytes1qtrByteInRecvQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415991: fltTcaBgpPeerBytes1yearByteInRecvQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415992: fltTcaBgpPeerBytes5minByteInRecvQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415993: fltTcaBgpPeerBytes15minByteInRecvQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415994: fltTcaBgpPeerBytes1hByteInRecvQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415995: fltTcaBgpPeerBytes1dByteInRecvQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415996: fltTcaBgpPeerBytes1wByteInRecvQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415997: fltTcaBgpPeerBytes1moByteInRecvQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415998: fltTcaBgpPeerBytes1qtrByteInRecvQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F415999: fltTcaBgpPeerBytes1yearByteInRecvQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4160: fltHcloudRsCtxConnectToCtxPeerResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F416024: fltTcaBgpPeerBytes5minByteInRecvQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416025: fltTcaBgpPeerBytes15minByteInRecvQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416026: fltTcaBgpPeerBytes1hByteInRecvQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416027: fltTcaBgpPeerBytes1dByteInRecvQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416028: fltTcaBgpPeerBytes1wByteInRecvQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416029: fltTcaBgpPeerBytes1moByteInRecvQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416030: fltTcaBgpPeerBytes1qtrByteInRecvQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416031: fltTcaBgpPeerBytes1yearByteInRecvQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416032: fltTcaBgpPeerBytes5minByteInRecvQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416033: fltTcaBgpPeerBytes15minByteInRecvQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416034: fltTcaBgpPeerBytes1hByteInRecvQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416035: fltTcaBgpPeerBytes1dByteInRecvQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416036: fltTcaBgpPeerBytes1wByteInRecvQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416037: fltTcaBgpPeerBytes1moByteInRecvQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416038: fltTcaBgpPeerBytes1qtrByteInRecvQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416039: fltTcaBgpPeerBytes1yearByteInRecvQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Receive Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Receive Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4161: fltHcloudRsCtxConnectToRouteTableResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F416112: fltTcaBgpPeerBytes5minByteInSendQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416113: fltTcaBgpPeerBytes15minByteInSendQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416114: fltTcaBgpPeerBytes1hByteInSendQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416115: fltTcaBgpPeerBytes1dByteInSendQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416116: fltTcaBgpPeerBytes1wByteInSendQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416117: fltTcaBgpPeerBytes1moByteInSendQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416118: fltTcaBgpPeerBytes1qtrByteInSendQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416119: fltTcaBgpPeerBytes1yearByteInSendQLast
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416128: fltTcaBgpPeerBytes5minByteInSendQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416129: fltTcaBgpPeerBytes15minByteInSendQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416130: fltTcaBgpPeerBytes1hByteInSendQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416131: fltTcaBgpPeerBytes1dByteInSendQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416132: fltTcaBgpPeerBytes1wByteInSendQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416133: fltTcaBgpPeerBytes1moByteInSendQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416134: fltTcaBgpPeerBytes1qtrByteInSendQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416135: fltTcaBgpPeerBytes1yearByteInSendQCum
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416136: fltTcaBgpPeerBytes5minByteInSendQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416137: fltTcaBgpPeerBytes15minByteInSendQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416138: fltTcaBgpPeerBytes1hByteInSendQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416139: fltTcaBgpPeerBytes1dByteInSendQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416140: fltTcaBgpPeerBytes1wByteInSendQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416141: fltTcaBgpPeerBytes1moByteInSendQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416142: fltTcaBgpPeerBytes1qtrByteInSendQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416143: fltTcaBgpPeerBytes1yearByteInSendQPer
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416144: fltTcaBgpPeerBytes5minByteInSendQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416145: fltTcaBgpPeerBytes15minByteInSendQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416146: fltTcaBgpPeerBytes1hByteInSendQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416147: fltTcaBgpPeerBytes1dByteInSendQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416148: fltTcaBgpPeerBytes1wByteInSendQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416149: fltTcaBgpPeerBytes1moByteInSendQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416150: fltTcaBgpPeerBytes1qtrByteInSendQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416151: fltTcaBgpPeerBytes1yearByteInSendQMin
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416152: fltTcaBgpPeerBytes5minByteInSendQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416153: fltTcaBgpPeerBytes15minByteInSendQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416154: fltTcaBgpPeerBytes1hByteInSendQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416155: fltTcaBgpPeerBytes1dByteInSendQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416156: fltTcaBgpPeerBytes1wByteInSendQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416157: fltTcaBgpPeerBytes1moByteInSendQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416158: fltTcaBgpPeerBytes1qtrByteInSendQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416159: fltTcaBgpPeerBytes1yearByteInSendQMax
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416160: fltTcaBgpPeerBytes5minByteInSendQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416161: fltTcaBgpPeerBytes15minByteInSendQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416162: fltTcaBgpPeerBytes1hByteInSendQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416163: fltTcaBgpPeerBytes1dByteInSendQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416164: fltTcaBgpPeerBytes1wByteInSendQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416165: fltTcaBgpPeerBytes1moByteInSendQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416166: fltTcaBgpPeerBytes1qtrByteInSendQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416167: fltTcaBgpPeerBytes1yearByteInSendQAvg
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416192: fltTcaBgpPeerBytes5minByteInSendQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416193: fltTcaBgpPeerBytes15minByteInSendQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416194: fltTcaBgpPeerBytes1hByteInSendQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416195: fltTcaBgpPeerBytes1dByteInSendQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416196: fltTcaBgpPeerBytes1wByteInSendQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416197: fltTcaBgpPeerBytes1moByteInSendQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416198: fltTcaBgpPeerBytes1qtrByteInSendQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416199: fltTcaBgpPeerBytes1yearByteInSendQTr
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4162: fltHcloudRsCtxConnectPeerToNwIntfResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F416200: fltTcaBgpPeerBytes5minByteInSendQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416201: fltTcaBgpPeerBytes15minByteInSendQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416202: fltTcaBgpPeerBytes1hByteInSendQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416203: fltTcaBgpPeerBytes1dByteInSendQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416204: fltTcaBgpPeerBytes1wByteInSendQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416205: fltTcaBgpPeerBytes1moByteInSendQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416206: fltTcaBgpPeerBytes1qtrByteInSendQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416207: fltTcaBgpPeerBytes1yearByteInSendQRate
Severity: variable
Explanation: This fault is caused by "Bytes in Send Queue rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bytes in Send Queue" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416280: fltTcaBgpPeerBytes5minByteRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416281: fltTcaBgpPeerBytes15minByteRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416282: fltTcaBgpPeerBytes1hByteRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416283: fltTcaBgpPeerBytes1dByteRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416284: fltTcaBgpPeerBytes1wByteRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416285: fltTcaBgpPeerBytes1moByteRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416286: fltTcaBgpPeerBytes1qtrByteRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416287: fltTcaBgpPeerBytes1yearByteRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416296: fltTcaBgpPeerBytes5minByteRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416297: fltTcaBgpPeerBytes15minByteRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416298: fltTcaBgpPeerBytes1hByteRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416299: fltTcaBgpPeerBytes1dByteRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4163: fltHcloudRsCtxPeerToCtxResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F416300: fltTcaBgpPeerBytes1wByteRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416301: fltTcaBgpPeerBytes1moByteRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416302: fltTcaBgpPeerBytes1qtrByteRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416303: fltTcaBgpPeerBytes1yearByteRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416304: fltTcaBgpPeerBytes5minByteRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416305: fltTcaBgpPeerBytes15minByteRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416306: fltTcaBgpPeerBytes1hByteRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416307: fltTcaBgpPeerBytes1dByteRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416308: fltTcaBgpPeerBytes1wByteRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416309: fltTcaBgpPeerBytes1moByteRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416310: fltTcaBgpPeerBytes1qtrByteRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416311: fltTcaBgpPeerBytes1yearByteRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416312: fltTcaBgpPeerBytes5minByteRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416313: fltTcaBgpPeerBytes15minByteRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416314: fltTcaBgpPeerBytes1hByteRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416315: fltTcaBgpPeerBytes1dByteRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416316: fltTcaBgpPeerBytes1wByteRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416317: fltTcaBgpPeerBytes1moByteRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416318: fltTcaBgpPeerBytes1qtrByteRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416319: fltTcaBgpPeerBytes1yearByteRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416320: fltTcaBgpPeerBytes5minByteRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416321: fltTcaBgpPeerBytes15minByteRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416322: fltTcaBgpPeerBytes1hByteRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416323: fltTcaBgpPeerBytes1dByteRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416324: fltTcaBgpPeerBytes1wByteRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416325: fltTcaBgpPeerBytes1moByteRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416326: fltTcaBgpPeerBytes1qtrByteRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416327: fltTcaBgpPeerBytes1yearByteRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416328: fltTcaBgpPeerBytes5minByteRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416329: fltTcaBgpPeerBytes15minByteRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416330: fltTcaBgpPeerBytes1hByteRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416331: fltTcaBgpPeerBytes1dByteRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416332: fltTcaBgpPeerBytes1wByteRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416333: fltTcaBgpPeerBytes1moByteRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416334: fltTcaBgpPeerBytes1qtrByteRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416335: fltTcaBgpPeerBytes1yearByteRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416360: fltTcaBgpPeerBytes5minByteRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416361: fltTcaBgpPeerBytes15minByteRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416362: fltTcaBgpPeerBytes1hByteRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416363: fltTcaBgpPeerBytes1dByteRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416364: fltTcaBgpPeerBytes1wByteRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416365: fltTcaBgpPeerBytes1moByteRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416366: fltTcaBgpPeerBytes1qtrByteRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416367: fltTcaBgpPeerBytes1yearByteRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416368: fltTcaBgpPeerBytes5minByteRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416369: fltTcaBgpPeerBytes15minByteRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416370: fltTcaBgpPeerBytes1hByteRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416371: fltTcaBgpPeerBytes1dByteRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416372: fltTcaBgpPeerBytes1wByteRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416373: fltTcaBgpPeerBytes1moByteRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416374: fltTcaBgpPeerBytes1qtrByteRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416375: fltTcaBgpPeerBytes1yearByteRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4164: fltHcloudRsCtxPeerToExtCtxResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F416448: fltTcaBgpPeerBytes5minByteSentLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416449: fltTcaBgpPeerBytes15minByteSentLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416450: fltTcaBgpPeerBytes1hByteSentLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416451: fltTcaBgpPeerBytes1dByteSentLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416452: fltTcaBgpPeerBytes1wByteSentLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416453: fltTcaBgpPeerBytes1moByteSentLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416454: fltTcaBgpPeerBytes1qtrByteSentLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416455: fltTcaBgpPeerBytes1yearByteSentLast
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416464: fltTcaBgpPeerBytes5minByteSentCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416465: fltTcaBgpPeerBytes15minByteSentCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416466: fltTcaBgpPeerBytes1hByteSentCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416467: fltTcaBgpPeerBytes1dByteSentCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416468: fltTcaBgpPeerBytes1wByteSentCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416469: fltTcaBgpPeerBytes1moByteSentCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416470: fltTcaBgpPeerBytes1qtrByteSentCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416471: fltTcaBgpPeerBytes1yearByteSentCum
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416472: fltTcaBgpPeerBytes5minByteSentPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416473: fltTcaBgpPeerBytes15minByteSentPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416474: fltTcaBgpPeerBytes1hByteSentPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416475: fltTcaBgpPeerBytes1dByteSentPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416476: fltTcaBgpPeerBytes1wByteSentPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416477: fltTcaBgpPeerBytes1moByteSentPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416478: fltTcaBgpPeerBytes1qtrByteSentPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416479: fltTcaBgpPeerBytes1yearByteSentPer
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416480: fltTcaBgpPeerBytes5minByteSentMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416481: fltTcaBgpPeerBytes15minByteSentMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416482: fltTcaBgpPeerBytes1hByteSentMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416483: fltTcaBgpPeerBytes1dByteSentMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416484: fltTcaBgpPeerBytes1wByteSentMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416485: fltTcaBgpPeerBytes1moByteSentMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416486: fltTcaBgpPeerBytes1qtrByteSentMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416487: fltTcaBgpPeerBytes1yearByteSentMin
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416488: fltTcaBgpPeerBytes5minByteSentMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416489: fltTcaBgpPeerBytes15minByteSentMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416490: fltTcaBgpPeerBytes1hByteSentMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416491: fltTcaBgpPeerBytes1dByteSentMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416492: fltTcaBgpPeerBytes1wByteSentMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416493: fltTcaBgpPeerBytes1moByteSentMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416494: fltTcaBgpPeerBytes1qtrByteSentMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416495: fltTcaBgpPeerBytes1yearByteSentMax
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416496: fltTcaBgpPeerBytes5minByteSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416497: fltTcaBgpPeerBytes15minByteSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416498: fltTcaBgpPeerBytes1hByteSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416499: fltTcaBgpPeerBytes1dByteSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4165: fltHcloudRsNextHopToCtxPeerResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F416500: fltTcaBgpPeerBytes1wByteSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416501: fltTcaBgpPeerBytes1moByteSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416502: fltTcaBgpPeerBytes1qtrByteSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416503: fltTcaBgpPeerBytes1yearByteSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416528: fltTcaBgpPeerBytes5minByteSentTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416529: fltTcaBgpPeerBytes15minByteSentTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416530: fltTcaBgpPeerBytes1hByteSentTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416531: fltTcaBgpPeerBytes1dByteSentTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416532: fltTcaBgpPeerBytes1wByteSentTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416533: fltTcaBgpPeerBytes1moByteSentTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416534: fltTcaBgpPeerBytes1qtrByteSentTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416535: fltTcaBgpPeerBytes1yearByteSentTr
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416536: fltTcaBgpPeerBytes5minByteSentRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416537: fltTcaBgpPeerBytes15minByteSentRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416538: fltTcaBgpPeerBytes1hByteSentRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416539: fltTcaBgpPeerBytes1dByteSentRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416540: fltTcaBgpPeerBytes1wByteSentRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416541: fltTcaBgpPeerBytes1moByteSentRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416542: fltTcaBgpPeerBytes1qtrByteSentRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416543: fltTcaBgpPeerBytes1yearByteSentRate
Severity: variable
Explanation: This fault is caused by "Number of Bytes Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Bytes Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4166: fltSvcredirDestmonConfigStFailed
Severity: major
Explanation: This fault occurs when a PBR service destination is used with multiple tracking types
- Use the destination with single tracking type
- To recover, delete this destination from all PBR policies where its used, then add the destination with correct tracking type
F416616: fltTcaBgpPeerKeepAlive5minKeepaliveRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416617: fltTcaBgpPeerKeepAlive15minKeepaliveRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416618: fltTcaBgpPeerKeepAlive1hKeepaliveRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416619: fltTcaBgpPeerKeepAlive1dKeepaliveRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416620: fltTcaBgpPeerKeepAlive1wKeepaliveRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416621: fltTcaBgpPeerKeepAlive1moKeepaliveRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416622: fltTcaBgpPeerKeepAlive1qtrKeepaliveRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416623: fltTcaBgpPeerKeepAlive1yearKeepaliveRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416632: fltTcaBgpPeerKeepAlive5minKeepaliveRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416633: fltTcaBgpPeerKeepAlive15minKeepaliveRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416634: fltTcaBgpPeerKeepAlive1hKeepaliveRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416635: fltTcaBgpPeerKeepAlive1dKeepaliveRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416636: fltTcaBgpPeerKeepAlive1wKeepaliveRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416637: fltTcaBgpPeerKeepAlive1moKeepaliveRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416638: fltTcaBgpPeerKeepAlive1qtrKeepaliveRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416639: fltTcaBgpPeerKeepAlive1yearKeepaliveRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416640: fltTcaBgpPeerKeepAlive5minKeepaliveRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416641: fltTcaBgpPeerKeepAlive15minKeepaliveRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416642: fltTcaBgpPeerKeepAlive1hKeepaliveRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416643: fltTcaBgpPeerKeepAlive1dKeepaliveRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416644: fltTcaBgpPeerKeepAlive1wKeepaliveRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416645: fltTcaBgpPeerKeepAlive1moKeepaliveRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416646: fltTcaBgpPeerKeepAlive1qtrKeepaliveRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416647: fltTcaBgpPeerKeepAlive1yearKeepaliveRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416648: fltTcaBgpPeerKeepAlive5minKeepaliveRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416649: fltTcaBgpPeerKeepAlive15minKeepaliveRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416650: fltTcaBgpPeerKeepAlive1hKeepaliveRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416651: fltTcaBgpPeerKeepAlive1dKeepaliveRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416652: fltTcaBgpPeerKeepAlive1wKeepaliveRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416653: fltTcaBgpPeerKeepAlive1moKeepaliveRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416654: fltTcaBgpPeerKeepAlive1qtrKeepaliveRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416655: fltTcaBgpPeerKeepAlive1yearKeepaliveRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416656: fltTcaBgpPeerKeepAlive5minKeepaliveRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416657: fltTcaBgpPeerKeepAlive15minKeepaliveRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416658: fltTcaBgpPeerKeepAlive1hKeepaliveRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416659: fltTcaBgpPeerKeepAlive1dKeepaliveRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416660: fltTcaBgpPeerKeepAlive1wKeepaliveRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416661: fltTcaBgpPeerKeepAlive1moKeepaliveRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416662: fltTcaBgpPeerKeepAlive1qtrKeepaliveRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416663: fltTcaBgpPeerKeepAlive1yearKeepaliveRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416664: fltTcaBgpPeerKeepAlive5minKeepaliveRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416665: fltTcaBgpPeerKeepAlive15minKeepaliveRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416666: fltTcaBgpPeerKeepAlive1hKeepaliveRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416667: fltTcaBgpPeerKeepAlive1dKeepaliveRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416668: fltTcaBgpPeerKeepAlive1wKeepaliveRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416669: fltTcaBgpPeerKeepAlive1moKeepaliveRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416670: fltTcaBgpPeerKeepAlive1qtrKeepaliveRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416671: fltTcaBgpPeerKeepAlive1yearKeepaliveRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416696: fltTcaBgpPeerKeepAlive5minKeepaliveRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416697: fltTcaBgpPeerKeepAlive15minKeepaliveRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416698: fltTcaBgpPeerKeepAlive1hKeepaliveRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416699: fltTcaBgpPeerKeepAlive1dKeepaliveRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416700: fltTcaBgpPeerKeepAlive1wKeepaliveRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416701: fltTcaBgpPeerKeepAlive1moKeepaliveRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416702: fltTcaBgpPeerKeepAlive1qtrKeepaliveRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416703: fltTcaBgpPeerKeepAlive1yearKeepaliveRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416704: fltTcaBgpPeerKeepAlive5minKeepaliveRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416705: fltTcaBgpPeerKeepAlive15minKeepaliveRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416706: fltTcaBgpPeerKeepAlive1hKeepaliveRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416707: fltTcaBgpPeerKeepAlive1dKeepaliveRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416708: fltTcaBgpPeerKeepAlive1wKeepaliveRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416709: fltTcaBgpPeerKeepAlive1moKeepaliveRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416710: fltTcaBgpPeerKeepAlive1qtrKeepaliveRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416711: fltTcaBgpPeerKeepAlive1yearKeepaliveRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416784: fltTcaBgpPeerKeepAlive5minKeepaliveSentLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416785: fltTcaBgpPeerKeepAlive15minKeepaliveSentLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416786: fltTcaBgpPeerKeepAlive1hKeepaliveSentLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416787: fltTcaBgpPeerKeepAlive1dKeepaliveSentLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416788: fltTcaBgpPeerKeepAlive1wKeepaliveSentLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416789: fltTcaBgpPeerKeepAlive1moKeepaliveSentLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416790: fltTcaBgpPeerKeepAlive1qtrKeepaliveSentLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416791: fltTcaBgpPeerKeepAlive1yearKeepaliveSentLast
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416800: fltTcaBgpPeerKeepAlive5minKeepaliveSentCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416801: fltTcaBgpPeerKeepAlive15minKeepaliveSentCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416802: fltTcaBgpPeerKeepAlive1hKeepaliveSentCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416803: fltTcaBgpPeerKeepAlive1dKeepaliveSentCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416804: fltTcaBgpPeerKeepAlive1wKeepaliveSentCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416805: fltTcaBgpPeerKeepAlive1moKeepaliveSentCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416806: fltTcaBgpPeerKeepAlive1qtrKeepaliveSentCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416807: fltTcaBgpPeerKeepAlive1yearKeepaliveSentCum
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416808: fltTcaBgpPeerKeepAlive5minKeepaliveSentPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416809: fltTcaBgpPeerKeepAlive15minKeepaliveSentPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416810: fltTcaBgpPeerKeepAlive1hKeepaliveSentPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416811: fltTcaBgpPeerKeepAlive1dKeepaliveSentPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416812: fltTcaBgpPeerKeepAlive1wKeepaliveSentPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416813: fltTcaBgpPeerKeepAlive1moKeepaliveSentPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416814: fltTcaBgpPeerKeepAlive1qtrKeepaliveSentPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416815: fltTcaBgpPeerKeepAlive1yearKeepaliveSentPer
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416816: fltTcaBgpPeerKeepAlive5minKeepaliveSentMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416817: fltTcaBgpPeerKeepAlive15minKeepaliveSentMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416818: fltTcaBgpPeerKeepAlive1hKeepaliveSentMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416819: fltTcaBgpPeerKeepAlive1dKeepaliveSentMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416820: fltTcaBgpPeerKeepAlive1wKeepaliveSentMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416821: fltTcaBgpPeerKeepAlive1moKeepaliveSentMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416822: fltTcaBgpPeerKeepAlive1qtrKeepaliveSentMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416823: fltTcaBgpPeerKeepAlive1yearKeepaliveSentMin
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416824: fltTcaBgpPeerKeepAlive5minKeepaliveSentMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416825: fltTcaBgpPeerKeepAlive15minKeepaliveSentMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416826: fltTcaBgpPeerKeepAlive1hKeepaliveSentMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416827: fltTcaBgpPeerKeepAlive1dKeepaliveSentMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416828: fltTcaBgpPeerKeepAlive1wKeepaliveSentMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416829: fltTcaBgpPeerKeepAlive1moKeepaliveSentMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416830: fltTcaBgpPeerKeepAlive1qtrKeepaliveSentMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416831: fltTcaBgpPeerKeepAlive1yearKeepaliveSentMax
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416832: fltTcaBgpPeerKeepAlive5minKeepaliveSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416833: fltTcaBgpPeerKeepAlive15minKeepaliveSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416834: fltTcaBgpPeerKeepAlive1hKeepaliveSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416835: fltTcaBgpPeerKeepAlive1dKeepaliveSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416836: fltTcaBgpPeerKeepAlive1wKeepaliveSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416837: fltTcaBgpPeerKeepAlive1moKeepaliveSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416838: fltTcaBgpPeerKeepAlive1qtrKeepaliveSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416839: fltTcaBgpPeerKeepAlive1yearKeepaliveSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416864: fltTcaBgpPeerKeepAlive5minKeepaliveSentTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416865: fltTcaBgpPeerKeepAlive15minKeepaliveSentTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416866: fltTcaBgpPeerKeepAlive1hKeepaliveSentTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416867: fltTcaBgpPeerKeepAlive1dKeepaliveSentTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416868: fltTcaBgpPeerKeepAlive1wKeepaliveSentTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416869: fltTcaBgpPeerKeepAlive1moKeepaliveSentTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416870: fltTcaBgpPeerKeepAlive1qtrKeepaliveSentTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416871: fltTcaBgpPeerKeepAlive1yearKeepaliveSentTr
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416872: fltTcaBgpPeerKeepAlive5minKeepaliveSentRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416873: fltTcaBgpPeerKeepAlive15minKeepaliveSentRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416874: fltTcaBgpPeerKeepAlive1hKeepaliveSentRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416875: fltTcaBgpPeerKeepAlive1dKeepaliveSentRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416876: fltTcaBgpPeerKeepAlive1wKeepaliveSentRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416877: fltTcaBgpPeerKeepAlive1moKeepaliveSentRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416878: fltTcaBgpPeerKeepAlive1qtrKeepaliveSentRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416879: fltTcaBgpPeerKeepAlive1yearKeepaliveSentRate
Severity: variable
Explanation: This fault is caused by "Number of Keepalive Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Keepalive Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416952: fltTcaBgpPeerMsg5minMsgRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416953: fltTcaBgpPeerMsg15minMsgRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416954: fltTcaBgpPeerMsg1hMsgRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416955: fltTcaBgpPeerMsg1dMsgRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416956: fltTcaBgpPeerMsg1wMsgRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416957: fltTcaBgpPeerMsg1moMsgRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416958: fltTcaBgpPeerMsg1qtrMsgRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416959: fltTcaBgpPeerMsg1yearMsgRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416968: fltTcaBgpPeerMsg5minMsgRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416969: fltTcaBgpPeerMsg15minMsgRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416970: fltTcaBgpPeerMsg1hMsgRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416971: fltTcaBgpPeerMsg1dMsgRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416972: fltTcaBgpPeerMsg1wMsgRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416973: fltTcaBgpPeerMsg1moMsgRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416974: fltTcaBgpPeerMsg1qtrMsgRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416975: fltTcaBgpPeerMsg1yearMsgRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416976: fltTcaBgpPeerMsg5minMsgRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416977: fltTcaBgpPeerMsg15minMsgRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416978: fltTcaBgpPeerMsg1hMsgRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416979: fltTcaBgpPeerMsg1dMsgRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416980: fltTcaBgpPeerMsg1wMsgRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416981: fltTcaBgpPeerMsg1moMsgRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416982: fltTcaBgpPeerMsg1qtrMsgRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416983: fltTcaBgpPeerMsg1yearMsgRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416984: fltTcaBgpPeerMsg5minMsgRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416985: fltTcaBgpPeerMsg15minMsgRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416986: fltTcaBgpPeerMsg1hMsgRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416987: fltTcaBgpPeerMsg1dMsgRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416988: fltTcaBgpPeerMsg1wMsgRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416989: fltTcaBgpPeerMsg1moMsgRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416990: fltTcaBgpPeerMsg1qtrMsgRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416991: fltTcaBgpPeerMsg1yearMsgRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416992: fltTcaBgpPeerMsg5minMsgRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416993: fltTcaBgpPeerMsg15minMsgRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416994: fltTcaBgpPeerMsg1hMsgRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416995: fltTcaBgpPeerMsg1dMsgRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416996: fltTcaBgpPeerMsg1wMsgRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416997: fltTcaBgpPeerMsg1moMsgRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416998: fltTcaBgpPeerMsg1qtrMsgRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F416999: fltTcaBgpPeerMsg1yearMsgRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417000: fltTcaBgpPeerMsg5minMsgRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417001: fltTcaBgpPeerMsg15minMsgRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417002: fltTcaBgpPeerMsg1hMsgRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417003: fltTcaBgpPeerMsg1dMsgRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417004: fltTcaBgpPeerMsg1wMsgRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417005: fltTcaBgpPeerMsg1moMsgRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417006: fltTcaBgpPeerMsg1qtrMsgRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417007: fltTcaBgpPeerMsg1yearMsgRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417032: fltTcaBgpPeerMsg5minMsgRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417033: fltTcaBgpPeerMsg15minMsgRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417034: fltTcaBgpPeerMsg1hMsgRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417035: fltTcaBgpPeerMsg1dMsgRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417036: fltTcaBgpPeerMsg1wMsgRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417037: fltTcaBgpPeerMsg1moMsgRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417038: fltTcaBgpPeerMsg1qtrMsgRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417039: fltTcaBgpPeerMsg1yearMsgRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417040: fltTcaBgpPeerMsg5minMsgRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417041: fltTcaBgpPeerMsg15minMsgRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417042: fltTcaBgpPeerMsg1hMsgRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417043: fltTcaBgpPeerMsg1dMsgRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417044: fltTcaBgpPeerMsg1wMsgRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417045: fltTcaBgpPeerMsg1moMsgRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417046: fltTcaBgpPeerMsg1qtrMsgRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417047: fltTcaBgpPeerMsg1yearMsgRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417120: fltTcaBgpPeerMsg5minMsgSentLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417121: fltTcaBgpPeerMsg15minMsgSentLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417122: fltTcaBgpPeerMsg1hMsgSentLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417123: fltTcaBgpPeerMsg1dMsgSentLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417124: fltTcaBgpPeerMsg1wMsgSentLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417125: fltTcaBgpPeerMsg1moMsgSentLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417126: fltTcaBgpPeerMsg1qtrMsgSentLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417127: fltTcaBgpPeerMsg1yearMsgSentLast
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417136: fltTcaBgpPeerMsg5minMsgSentCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417137: fltTcaBgpPeerMsg15minMsgSentCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417138: fltTcaBgpPeerMsg1hMsgSentCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417139: fltTcaBgpPeerMsg1dMsgSentCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417140: fltTcaBgpPeerMsg1wMsgSentCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417141: fltTcaBgpPeerMsg1moMsgSentCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417142: fltTcaBgpPeerMsg1qtrMsgSentCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417143: fltTcaBgpPeerMsg1yearMsgSentCum
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417144: fltTcaBgpPeerMsg5minMsgSentPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417145: fltTcaBgpPeerMsg15minMsgSentPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417146: fltTcaBgpPeerMsg1hMsgSentPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417147: fltTcaBgpPeerMsg1dMsgSentPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417148: fltTcaBgpPeerMsg1wMsgSentPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417149: fltTcaBgpPeerMsg1moMsgSentPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417150: fltTcaBgpPeerMsg1qtrMsgSentPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417151: fltTcaBgpPeerMsg1yearMsgSentPer
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417152: fltTcaBgpPeerMsg5minMsgSentMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417153: fltTcaBgpPeerMsg15minMsgSentMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417154: fltTcaBgpPeerMsg1hMsgSentMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417155: fltTcaBgpPeerMsg1dMsgSentMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417156: fltTcaBgpPeerMsg1wMsgSentMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417157: fltTcaBgpPeerMsg1moMsgSentMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417158: fltTcaBgpPeerMsg1qtrMsgSentMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417159: fltTcaBgpPeerMsg1yearMsgSentMin
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417160: fltTcaBgpPeerMsg5minMsgSentMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417161: fltTcaBgpPeerMsg15minMsgSentMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417162: fltTcaBgpPeerMsg1hMsgSentMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417163: fltTcaBgpPeerMsg1dMsgSentMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417164: fltTcaBgpPeerMsg1wMsgSentMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417165: fltTcaBgpPeerMsg1moMsgSentMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417166: fltTcaBgpPeerMsg1qtrMsgSentMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417167: fltTcaBgpPeerMsg1yearMsgSentMax
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417168: fltTcaBgpPeerMsg5minMsgSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417169: fltTcaBgpPeerMsg15minMsgSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417170: fltTcaBgpPeerMsg1hMsgSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417171: fltTcaBgpPeerMsg1dMsgSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417172: fltTcaBgpPeerMsg1wMsgSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417173: fltTcaBgpPeerMsg1moMsgSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417174: fltTcaBgpPeerMsg1qtrMsgSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417175: fltTcaBgpPeerMsg1yearMsgSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4172: fltPtpInstPtpHighCorrection
Severity: major
Explanation: This fault occurs when the PTP clock has high corrections.
- Disable/Enable PTP during Maintenance Window to recover TOR.
- Make sure all top of Rack Switches and Spines have NTP configured and NTP synced to NTP Server.
- If you are still seeing this, create tech-support ticket and contact Cisco TAC
F417200: fltTcaBgpPeerMsg5minMsgSentTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417201: fltTcaBgpPeerMsg15minMsgSentTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417202: fltTcaBgpPeerMsg1hMsgSentTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417203: fltTcaBgpPeerMsg1dMsgSentTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417204: fltTcaBgpPeerMsg1wMsgSentTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417205: fltTcaBgpPeerMsg1moMsgSentTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417206: fltTcaBgpPeerMsg1qtrMsgSentTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417207: fltTcaBgpPeerMsg1yearMsgSentTr
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417208: fltTcaBgpPeerMsg5minMsgSentRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417209: fltTcaBgpPeerMsg15minMsgSentRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417210: fltTcaBgpPeerMsg1hMsgSentRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417211: fltTcaBgpPeerMsg1dMsgSentRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417212: fltTcaBgpPeerMsg1wMsgSentRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417213: fltTcaBgpPeerMsg1moMsgSentRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417214: fltTcaBgpPeerMsg1qtrMsgSentRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417215: fltTcaBgpPeerMsg1yearMsgSentRate
Severity: variable
Explanation: This fault is caused by "Number of Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417288: fltTcaBgpPeerMsg5minNotifRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417289: fltTcaBgpPeerMsg15minNotifRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417290: fltTcaBgpPeerMsg1hNotifRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417291: fltTcaBgpPeerMsg1dNotifRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417292: fltTcaBgpPeerMsg1wNotifRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417293: fltTcaBgpPeerMsg1moNotifRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417294: fltTcaBgpPeerMsg1qtrNotifRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417295: fltTcaBgpPeerMsg1yearNotifRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4173: fltPtpInstPtpTimeSyncLost
Severity: minor
Explanation: This fault occurs when the PTP lost synchronization with master clock.
- If you are still seeing this, create tech-support ticket and contact Cisco TAC
F417304: fltTcaBgpPeerMsg5minNotifRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417305: fltTcaBgpPeerMsg15minNotifRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417306: fltTcaBgpPeerMsg1hNotifRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417307: fltTcaBgpPeerMsg1dNotifRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417308: fltTcaBgpPeerMsg1wNotifRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417309: fltTcaBgpPeerMsg1moNotifRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417310: fltTcaBgpPeerMsg1qtrNotifRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417311: fltTcaBgpPeerMsg1yearNotifRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417312: fltTcaBgpPeerMsg5minNotifRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417313: fltTcaBgpPeerMsg15minNotifRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417314: fltTcaBgpPeerMsg1hNotifRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417315: fltTcaBgpPeerMsg1dNotifRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417316: fltTcaBgpPeerMsg1wNotifRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417317: fltTcaBgpPeerMsg1moNotifRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417318: fltTcaBgpPeerMsg1qtrNotifRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417319: fltTcaBgpPeerMsg1yearNotifRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417320: fltTcaBgpPeerMsg5minNotifRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417321: fltTcaBgpPeerMsg15minNotifRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417322: fltTcaBgpPeerMsg1hNotifRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417323: fltTcaBgpPeerMsg1dNotifRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417324: fltTcaBgpPeerMsg1wNotifRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417325: fltTcaBgpPeerMsg1moNotifRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417326: fltTcaBgpPeerMsg1qtrNotifRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417327: fltTcaBgpPeerMsg1yearNotifRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417328: fltTcaBgpPeerMsg5minNotifRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417329: fltTcaBgpPeerMsg15minNotifRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417330: fltTcaBgpPeerMsg1hNotifRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417331: fltTcaBgpPeerMsg1dNotifRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417332: fltTcaBgpPeerMsg1wNotifRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417333: fltTcaBgpPeerMsg1moNotifRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417334: fltTcaBgpPeerMsg1qtrNotifRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417335: fltTcaBgpPeerMsg1yearNotifRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417336: fltTcaBgpPeerMsg5minNotifRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417337: fltTcaBgpPeerMsg15minNotifRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417338: fltTcaBgpPeerMsg1hNotifRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417339: fltTcaBgpPeerMsg1dNotifRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417340: fltTcaBgpPeerMsg1wNotifRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417341: fltTcaBgpPeerMsg1moNotifRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417342: fltTcaBgpPeerMsg1qtrNotifRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417343: fltTcaBgpPeerMsg1yearNotifRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417368: fltTcaBgpPeerMsg5minNotifRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417369: fltTcaBgpPeerMsg15minNotifRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417370: fltTcaBgpPeerMsg1hNotifRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417371: fltTcaBgpPeerMsg1dNotifRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417372: fltTcaBgpPeerMsg1wNotifRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417373: fltTcaBgpPeerMsg1moNotifRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417374: fltTcaBgpPeerMsg1qtrNotifRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417375: fltTcaBgpPeerMsg1yearNotifRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417376: fltTcaBgpPeerMsg5minNotifRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417377: fltTcaBgpPeerMsg15minNotifRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417378: fltTcaBgpPeerMsg1hNotifRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417379: fltTcaBgpPeerMsg1dNotifRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417380: fltTcaBgpPeerMsg1wNotifRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417381: fltTcaBgpPeerMsg1moNotifRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417382: fltTcaBgpPeerMsg1qtrNotifRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417383: fltTcaBgpPeerMsg1yearNotifRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417456: fltTcaBgpPeerMsg5minNotifSentLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417457: fltTcaBgpPeerMsg15minNotifSentLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417458: fltTcaBgpPeerMsg1hNotifSentLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417459: fltTcaBgpPeerMsg1dNotifSentLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417460: fltTcaBgpPeerMsg1wNotifSentLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417461: fltTcaBgpPeerMsg1moNotifSentLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417462: fltTcaBgpPeerMsg1qtrNotifSentLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417463: fltTcaBgpPeerMsg1yearNotifSentLast
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417472: fltTcaBgpPeerMsg5minNotifSentCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417473: fltTcaBgpPeerMsg15minNotifSentCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417474: fltTcaBgpPeerMsg1hNotifSentCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417475: fltTcaBgpPeerMsg1dNotifSentCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417476: fltTcaBgpPeerMsg1wNotifSentCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417477: fltTcaBgpPeerMsg1moNotifSentCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417478: fltTcaBgpPeerMsg1qtrNotifSentCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417479: fltTcaBgpPeerMsg1yearNotifSentCum
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417480: fltTcaBgpPeerMsg5minNotifSentPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417481: fltTcaBgpPeerMsg15minNotifSentPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417482: fltTcaBgpPeerMsg1hNotifSentPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417483: fltTcaBgpPeerMsg1dNotifSentPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417484: fltTcaBgpPeerMsg1wNotifSentPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417485: fltTcaBgpPeerMsg1moNotifSentPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417486: fltTcaBgpPeerMsg1qtrNotifSentPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417487: fltTcaBgpPeerMsg1yearNotifSentPer
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417488: fltTcaBgpPeerMsg5minNotifSentMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417489: fltTcaBgpPeerMsg15minNotifSentMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417490: fltTcaBgpPeerMsg1hNotifSentMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417491: fltTcaBgpPeerMsg1dNotifSentMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417492: fltTcaBgpPeerMsg1wNotifSentMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417493: fltTcaBgpPeerMsg1moNotifSentMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417494: fltTcaBgpPeerMsg1qtrNotifSentMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417495: fltTcaBgpPeerMsg1yearNotifSentMin
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417496: fltTcaBgpPeerMsg5minNotifSentMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417497: fltTcaBgpPeerMsg15minNotifSentMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417498: fltTcaBgpPeerMsg1hNotifSentMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417499: fltTcaBgpPeerMsg1dNotifSentMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4175: fltPtpInstPtpSynceConfigIsMissing
Severity: minor
Explanation: This fault occurs when PTP Telecom profile configured when syncE config doesn't exist .
- If you are still seeing this, create tech-support ticket and contact Cisco TAC
F417500: fltTcaBgpPeerMsg1wNotifSentMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417501: fltTcaBgpPeerMsg1moNotifSentMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417502: fltTcaBgpPeerMsg1qtrNotifSentMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417503: fltTcaBgpPeerMsg1yearNotifSentMax
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417504: fltTcaBgpPeerMsg5minNotifSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417505: fltTcaBgpPeerMsg15minNotifSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417506: fltTcaBgpPeerMsg1hNotifSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417507: fltTcaBgpPeerMsg1dNotifSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417508: fltTcaBgpPeerMsg1wNotifSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417509: fltTcaBgpPeerMsg1moNotifSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417510: fltTcaBgpPeerMsg1qtrNotifSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417511: fltTcaBgpPeerMsg1yearNotifSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417536: fltTcaBgpPeerMsg5minNotifSentTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417537: fltTcaBgpPeerMsg15minNotifSentTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417538: fltTcaBgpPeerMsg1hNotifSentTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417539: fltTcaBgpPeerMsg1dNotifSentTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417540: fltTcaBgpPeerMsg1wNotifSentTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417541: fltTcaBgpPeerMsg1moNotifSentTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417542: fltTcaBgpPeerMsg1qtrNotifSentTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417543: fltTcaBgpPeerMsg1yearNotifSentTr
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417544: fltTcaBgpPeerMsg5minNotifSentRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417545: fltTcaBgpPeerMsg15minNotifSentRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417546: fltTcaBgpPeerMsg1hNotifSentRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417547: fltTcaBgpPeerMsg1dNotifSentRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417548: fltTcaBgpPeerMsg1wNotifSentRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417549: fltTcaBgpPeerMsg1moNotifSentRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417550: fltTcaBgpPeerMsg1qtrNotifSentRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417551: fltTcaBgpPeerMsg1yearNotifSentRate
Severity: variable
Explanation: This fault is caused by "Number of Notification Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Notification Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4176: fltPtpInstPtpTelecomProfileNotSupported
Severity: minor
Explanation: This fault occurs when the PTP Telecom profile is not supported.
- If you are still seeing this, create tech-support ticket and contact Cisco TAC
F417624: fltTcaBgpPeerOpen5minOpenRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417625: fltTcaBgpPeerOpen15minOpenRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417626: fltTcaBgpPeerOpen1hOpenRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417627: fltTcaBgpPeerOpen1dOpenRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417628: fltTcaBgpPeerOpen1wOpenRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417629: fltTcaBgpPeerOpen1moOpenRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417630: fltTcaBgpPeerOpen1qtrOpenRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417631: fltTcaBgpPeerOpen1yearOpenRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417640: fltTcaBgpPeerOpen5minOpenRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417641: fltTcaBgpPeerOpen15minOpenRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417642: fltTcaBgpPeerOpen1hOpenRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417643: fltTcaBgpPeerOpen1dOpenRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417644: fltTcaBgpPeerOpen1wOpenRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417645: fltTcaBgpPeerOpen1moOpenRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417646: fltTcaBgpPeerOpen1qtrOpenRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417647: fltTcaBgpPeerOpen1yearOpenRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417648: fltTcaBgpPeerOpen5minOpenRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417649: fltTcaBgpPeerOpen15minOpenRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417650: fltTcaBgpPeerOpen1hOpenRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417651: fltTcaBgpPeerOpen1dOpenRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417652: fltTcaBgpPeerOpen1wOpenRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417653: fltTcaBgpPeerOpen1moOpenRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417654: fltTcaBgpPeerOpen1qtrOpenRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417655: fltTcaBgpPeerOpen1yearOpenRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417656: fltTcaBgpPeerOpen5minOpenRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417657: fltTcaBgpPeerOpen15minOpenRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417658: fltTcaBgpPeerOpen1hOpenRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417659: fltTcaBgpPeerOpen1dOpenRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417660: fltTcaBgpPeerOpen1wOpenRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417661: fltTcaBgpPeerOpen1moOpenRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417662: fltTcaBgpPeerOpen1qtrOpenRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417663: fltTcaBgpPeerOpen1yearOpenRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417664: fltTcaBgpPeerOpen5minOpenRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417665: fltTcaBgpPeerOpen15minOpenRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417666: fltTcaBgpPeerOpen1hOpenRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417667: fltTcaBgpPeerOpen1dOpenRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417668: fltTcaBgpPeerOpen1wOpenRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417669: fltTcaBgpPeerOpen1moOpenRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417670: fltTcaBgpPeerOpen1qtrOpenRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417671: fltTcaBgpPeerOpen1yearOpenRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417672: fltTcaBgpPeerOpen5minOpenRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417673: fltTcaBgpPeerOpen15minOpenRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417674: fltTcaBgpPeerOpen1hOpenRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417675: fltTcaBgpPeerOpen1dOpenRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417676: fltTcaBgpPeerOpen1wOpenRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417677: fltTcaBgpPeerOpen1moOpenRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417678: fltTcaBgpPeerOpen1qtrOpenRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417679: fltTcaBgpPeerOpen1yearOpenRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417704: fltTcaBgpPeerOpen5minOpenRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417705: fltTcaBgpPeerOpen15minOpenRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417706: fltTcaBgpPeerOpen1hOpenRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417707: fltTcaBgpPeerOpen1dOpenRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417708: fltTcaBgpPeerOpen1wOpenRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417709: fltTcaBgpPeerOpen1moOpenRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417710: fltTcaBgpPeerOpen1qtrOpenRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417711: fltTcaBgpPeerOpen1yearOpenRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417712: fltTcaBgpPeerOpen5minOpenRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417713: fltTcaBgpPeerOpen15minOpenRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417714: fltTcaBgpPeerOpen1hOpenRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417715: fltTcaBgpPeerOpen1dOpenRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417716: fltTcaBgpPeerOpen1wOpenRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417717: fltTcaBgpPeerOpen1moOpenRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417718: fltTcaBgpPeerOpen1qtrOpenRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417719: fltTcaBgpPeerOpen1yearOpenRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417792: fltTcaBgpPeerOpen5minOpenSentLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417793: fltTcaBgpPeerOpen15minOpenSentLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417794: fltTcaBgpPeerOpen1hOpenSentLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417795: fltTcaBgpPeerOpen1dOpenSentLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417796: fltTcaBgpPeerOpen1wOpenSentLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417797: fltTcaBgpPeerOpen1moOpenSentLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417798: fltTcaBgpPeerOpen1qtrOpenSentLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417799: fltTcaBgpPeerOpen1yearOpenSentLast
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4178: fltMaintUpgJobReloadSkip
Severity: warning
Explanation: This fault occurs when a switch SMU patch is installed/uninstalled with ReloadSkip option.
- Reload the switch.
F417808: fltTcaBgpPeerOpen5minOpenSentCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417809: fltTcaBgpPeerOpen15minOpenSentCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417810: fltTcaBgpPeerOpen1hOpenSentCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417811: fltTcaBgpPeerOpen1dOpenSentCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417812: fltTcaBgpPeerOpen1wOpenSentCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417813: fltTcaBgpPeerOpen1moOpenSentCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417814: fltTcaBgpPeerOpen1qtrOpenSentCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417815: fltTcaBgpPeerOpen1yearOpenSentCum
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417816: fltTcaBgpPeerOpen5minOpenSentPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417817: fltTcaBgpPeerOpen15minOpenSentPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417818: fltTcaBgpPeerOpen1hOpenSentPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417819: fltTcaBgpPeerOpen1dOpenSentPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417820: fltTcaBgpPeerOpen1wOpenSentPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417821: fltTcaBgpPeerOpen1moOpenSentPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417822: fltTcaBgpPeerOpen1qtrOpenSentPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417823: fltTcaBgpPeerOpen1yearOpenSentPer
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417824: fltTcaBgpPeerOpen5minOpenSentMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417825: fltTcaBgpPeerOpen15minOpenSentMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417826: fltTcaBgpPeerOpen1hOpenSentMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417827: fltTcaBgpPeerOpen1dOpenSentMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417828: fltTcaBgpPeerOpen1wOpenSentMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417829: fltTcaBgpPeerOpen1moOpenSentMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417830: fltTcaBgpPeerOpen1qtrOpenSentMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417831: fltTcaBgpPeerOpen1yearOpenSentMin
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417832: fltTcaBgpPeerOpen5minOpenSentMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417833: fltTcaBgpPeerOpen15minOpenSentMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417834: fltTcaBgpPeerOpen1hOpenSentMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417835: fltTcaBgpPeerOpen1dOpenSentMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417836: fltTcaBgpPeerOpen1wOpenSentMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417837: fltTcaBgpPeerOpen1moOpenSentMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417838: fltTcaBgpPeerOpen1qtrOpenSentMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417839: fltTcaBgpPeerOpen1yearOpenSentMax
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417840: fltTcaBgpPeerOpen5minOpenSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417841: fltTcaBgpPeerOpen15minOpenSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417842: fltTcaBgpPeerOpen1hOpenSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417843: fltTcaBgpPeerOpen1dOpenSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417844: fltTcaBgpPeerOpen1wOpenSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417845: fltTcaBgpPeerOpen1moOpenSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417846: fltTcaBgpPeerOpen1qtrOpenSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417847: fltTcaBgpPeerOpen1yearOpenSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417872: fltTcaBgpPeerOpen5minOpenSentTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417873: fltTcaBgpPeerOpen15minOpenSentTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417874: fltTcaBgpPeerOpen1hOpenSentTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417875: fltTcaBgpPeerOpen1dOpenSentTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417876: fltTcaBgpPeerOpen1wOpenSentTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417877: fltTcaBgpPeerOpen1moOpenSentTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417878: fltTcaBgpPeerOpen1qtrOpenSentTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417879: fltTcaBgpPeerOpen1yearOpenSentTr
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417880: fltTcaBgpPeerOpen5minOpenSentRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417881: fltTcaBgpPeerOpen15minOpenSentRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417882: fltTcaBgpPeerOpen1hOpenSentRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417883: fltTcaBgpPeerOpen1dOpenSentRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417884: fltTcaBgpPeerOpen1wOpenSentRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417885: fltTcaBgpPeerOpen1moOpenSentRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417886: fltTcaBgpPeerOpen1qtrOpenSentRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417887: fltTcaBgpPeerOpen1yearOpenSentRate
Severity: variable
Explanation: This fault is caused by "Number of Open Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Open Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417960: fltTcaBgpPeerOpen5minUpdateRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417961: fltTcaBgpPeerOpen15minUpdateRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417962: fltTcaBgpPeerOpen1hUpdateRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417963: fltTcaBgpPeerOpen1dUpdateRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417964: fltTcaBgpPeerOpen1wUpdateRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417965: fltTcaBgpPeerOpen1moUpdateRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417966: fltTcaBgpPeerOpen1qtrUpdateRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417967: fltTcaBgpPeerOpen1yearUpdateRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417976: fltTcaBgpPeerOpen5minUpdateRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417977: fltTcaBgpPeerOpen15minUpdateRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417978: fltTcaBgpPeerOpen1hUpdateRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417979: fltTcaBgpPeerOpen1dUpdateRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417980: fltTcaBgpPeerOpen1wUpdateRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417981: fltTcaBgpPeerOpen1moUpdateRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417982: fltTcaBgpPeerOpen1qtrUpdateRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417983: fltTcaBgpPeerOpen1yearUpdateRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417984: fltTcaBgpPeerOpen5minUpdateRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417985: fltTcaBgpPeerOpen15minUpdateRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417986: fltTcaBgpPeerOpen1hUpdateRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417987: fltTcaBgpPeerOpen1dUpdateRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417988: fltTcaBgpPeerOpen1wUpdateRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417989: fltTcaBgpPeerOpen1moUpdateRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417990: fltTcaBgpPeerOpen1qtrUpdateRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417991: fltTcaBgpPeerOpen1yearUpdateRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417992: fltTcaBgpPeerOpen5minUpdateRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417993: fltTcaBgpPeerOpen15minUpdateRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417994: fltTcaBgpPeerOpen1hUpdateRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417995: fltTcaBgpPeerOpen1dUpdateRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417996: fltTcaBgpPeerOpen1wUpdateRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417997: fltTcaBgpPeerOpen1moUpdateRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417998: fltTcaBgpPeerOpen1qtrUpdateRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F417999: fltTcaBgpPeerOpen1yearUpdateRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4180: fltHcloudRsEpToSecurityGroupOperRsEpToSecurityGroupOper
Severity: minor
Explanation: This fault occurs where the Endpoint Group could not be attached to the target Endpoint even if it was matching the Selector's expression.
- Depending on the cloud provider and your configuration, an Endpoint can be attached to at most one EPG. Make sure that the EPG's Selector is matching the intended Endpoint.
- If fault still has not cleared, please contact Cisco TAC.
- Check the error message and make sure that the tenant's account has permission to access and possibly modify the Endpoint configuration.
F418000: fltTcaBgpPeerOpen5minUpdateRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418001: fltTcaBgpPeerOpen15minUpdateRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418002: fltTcaBgpPeerOpen1hUpdateRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418003: fltTcaBgpPeerOpen1dUpdateRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418004: fltTcaBgpPeerOpen1wUpdateRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418005: fltTcaBgpPeerOpen1moUpdateRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418006: fltTcaBgpPeerOpen1qtrUpdateRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418007: fltTcaBgpPeerOpen1yearUpdateRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418008: fltTcaBgpPeerOpen5minUpdateRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418009: fltTcaBgpPeerOpen15minUpdateRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418010: fltTcaBgpPeerOpen1hUpdateRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418011: fltTcaBgpPeerOpen1dUpdateRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418012: fltTcaBgpPeerOpen1wUpdateRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418013: fltTcaBgpPeerOpen1moUpdateRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418014: fltTcaBgpPeerOpen1qtrUpdateRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418015: fltTcaBgpPeerOpen1yearUpdateRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418040: fltTcaBgpPeerOpen5minUpdateRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418041: fltTcaBgpPeerOpen15minUpdateRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418042: fltTcaBgpPeerOpen1hUpdateRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418043: fltTcaBgpPeerOpen1dUpdateRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418044: fltTcaBgpPeerOpen1wUpdateRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418045: fltTcaBgpPeerOpen1moUpdateRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418046: fltTcaBgpPeerOpen1qtrUpdateRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418047: fltTcaBgpPeerOpen1yearUpdateRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418048: fltTcaBgpPeerOpen5minUpdateRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418049: fltTcaBgpPeerOpen15minUpdateRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418050: fltTcaBgpPeerOpen1hUpdateRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418051: fltTcaBgpPeerOpen1dUpdateRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418052: fltTcaBgpPeerOpen1wUpdateRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418053: fltTcaBgpPeerOpen1moUpdateRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418054: fltTcaBgpPeerOpen1qtrUpdateRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418055: fltTcaBgpPeerOpen1yearUpdateRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4181: fltHcloudCtxProfileOperCloudCtxProfileOperStateDown
Severity: minor
Explanation: This fault occurs when an erroneous configuration is pushed for creating a CtxProfile.
- Please check the fault message and make necessary changes to the config for creating the CtxProfile.
- If fault still has not cleared, please contact Cisco TAC.
F418128: fltTcaBgpPeerOpen5minUpdateSentLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418129: fltTcaBgpPeerOpen15minUpdateSentLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418130: fltTcaBgpPeerOpen1hUpdateSentLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418131: fltTcaBgpPeerOpen1dUpdateSentLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418132: fltTcaBgpPeerOpen1wUpdateSentLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418133: fltTcaBgpPeerOpen1moUpdateSentLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418134: fltTcaBgpPeerOpen1qtrUpdateSentLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418135: fltTcaBgpPeerOpen1yearUpdateSentLast
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418144: fltTcaBgpPeerOpen5minUpdateSentCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418145: fltTcaBgpPeerOpen15minUpdateSentCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418146: fltTcaBgpPeerOpen1hUpdateSentCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418147: fltTcaBgpPeerOpen1dUpdateSentCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418148: fltTcaBgpPeerOpen1wUpdateSentCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418149: fltTcaBgpPeerOpen1moUpdateSentCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418150: fltTcaBgpPeerOpen1qtrUpdateSentCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418151: fltTcaBgpPeerOpen1yearUpdateSentCum
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418152: fltTcaBgpPeerOpen5minUpdateSentPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418153: fltTcaBgpPeerOpen15minUpdateSentPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418154: fltTcaBgpPeerOpen1hUpdateSentPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418155: fltTcaBgpPeerOpen1dUpdateSentPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418156: fltTcaBgpPeerOpen1wUpdateSentPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418157: fltTcaBgpPeerOpen1moUpdateSentPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418158: fltTcaBgpPeerOpen1qtrUpdateSentPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418159: fltTcaBgpPeerOpen1yearUpdateSentPer
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418160: fltTcaBgpPeerOpen5minUpdateSentMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418161: fltTcaBgpPeerOpen15minUpdateSentMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418162: fltTcaBgpPeerOpen1hUpdateSentMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418163: fltTcaBgpPeerOpen1dUpdateSentMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418164: fltTcaBgpPeerOpen1wUpdateSentMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418165: fltTcaBgpPeerOpen1moUpdateSentMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418166: fltTcaBgpPeerOpen1qtrUpdateSentMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418167: fltTcaBgpPeerOpen1yearUpdateSentMin
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418168: fltTcaBgpPeerOpen5minUpdateSentMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418169: fltTcaBgpPeerOpen15minUpdateSentMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418170: fltTcaBgpPeerOpen1hUpdateSentMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418171: fltTcaBgpPeerOpen1dUpdateSentMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418172: fltTcaBgpPeerOpen1wUpdateSentMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418173: fltTcaBgpPeerOpen1moUpdateSentMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418174: fltTcaBgpPeerOpen1qtrUpdateSentMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418175: fltTcaBgpPeerOpen1yearUpdateSentMax
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418176: fltTcaBgpPeerOpen5minUpdateSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418177: fltTcaBgpPeerOpen15minUpdateSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418178: fltTcaBgpPeerOpen1hUpdateSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418179: fltTcaBgpPeerOpen1dUpdateSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418180: fltTcaBgpPeerOpen1wUpdateSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418181: fltTcaBgpPeerOpen1moUpdateSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418182: fltTcaBgpPeerOpen1qtrUpdateSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418183: fltTcaBgpPeerOpen1yearUpdateSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4182: fltCloudRsExtNetworkPToCtxResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F418208: fltTcaBgpPeerOpen5minUpdateSentTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418209: fltTcaBgpPeerOpen15minUpdateSentTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418210: fltTcaBgpPeerOpen1hUpdateSentTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418211: fltTcaBgpPeerOpen1dUpdateSentTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418212: fltTcaBgpPeerOpen1wUpdateSentTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418213: fltTcaBgpPeerOpen1moUpdateSentTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418214: fltTcaBgpPeerOpen1qtrUpdateSentTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418215: fltTcaBgpPeerOpen1yearUpdateSentTr
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418216: fltTcaBgpPeerOpen5minUpdateSentRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418217: fltTcaBgpPeerOpen15minUpdateSentRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418218: fltTcaBgpPeerOpen1hUpdateSentRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418219: fltTcaBgpPeerOpen1dUpdateSentRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418220: fltTcaBgpPeerOpen1wUpdateSentRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418221: fltTcaBgpPeerOpen1moUpdateSentRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418222: fltTcaBgpPeerOpen1qtrUpdateSentRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418223: fltTcaBgpPeerOpen1yearUpdateSentRate
Severity: variable
Explanation: This fault is caused by "Number of Update Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Update Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418296: fltTcaBgpPeerRoute5minCapabilityRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418297: fltTcaBgpPeerRoute15minCapabilityRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418298: fltTcaBgpPeerRoute1hCapabilityRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418299: fltTcaBgpPeerRoute1dCapabilityRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4183: fltCloudRsExtNetworkPToRegionResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F418300: fltTcaBgpPeerRoute1wCapabilityRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418301: fltTcaBgpPeerRoute1moCapabilityRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418302: fltTcaBgpPeerRoute1qtrCapabilityRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418303: fltTcaBgpPeerRoute1yearCapabilityRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418312: fltTcaBgpPeerRoute5minCapabilityRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418313: fltTcaBgpPeerRoute15minCapabilityRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418314: fltTcaBgpPeerRoute1hCapabilityRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418315: fltTcaBgpPeerRoute1dCapabilityRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418316: fltTcaBgpPeerRoute1wCapabilityRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418317: fltTcaBgpPeerRoute1moCapabilityRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418318: fltTcaBgpPeerRoute1qtrCapabilityRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418319: fltTcaBgpPeerRoute1yearCapabilityRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418320: fltTcaBgpPeerRoute5minCapabilityRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418321: fltTcaBgpPeerRoute15minCapabilityRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418322: fltTcaBgpPeerRoute1hCapabilityRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418323: fltTcaBgpPeerRoute1dCapabilityRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418324: fltTcaBgpPeerRoute1wCapabilityRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418325: fltTcaBgpPeerRoute1moCapabilityRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418326: fltTcaBgpPeerRoute1qtrCapabilityRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418327: fltTcaBgpPeerRoute1yearCapabilityRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418328: fltTcaBgpPeerRoute5minCapabilityRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418329: fltTcaBgpPeerRoute15minCapabilityRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418330: fltTcaBgpPeerRoute1hCapabilityRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418331: fltTcaBgpPeerRoute1dCapabilityRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418332: fltTcaBgpPeerRoute1wCapabilityRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418333: fltTcaBgpPeerRoute1moCapabilityRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418334: fltTcaBgpPeerRoute1qtrCapabilityRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418335: fltTcaBgpPeerRoute1yearCapabilityRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418336: fltTcaBgpPeerRoute5minCapabilityRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418337: fltTcaBgpPeerRoute15minCapabilityRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418338: fltTcaBgpPeerRoute1hCapabilityRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418339: fltTcaBgpPeerRoute1dCapabilityRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418340: fltTcaBgpPeerRoute1wCapabilityRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418341: fltTcaBgpPeerRoute1moCapabilityRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418342: fltTcaBgpPeerRoute1qtrCapabilityRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418343: fltTcaBgpPeerRoute1yearCapabilityRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418344: fltTcaBgpPeerRoute5minCapabilityRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418345: fltTcaBgpPeerRoute15minCapabilityRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418346: fltTcaBgpPeerRoute1hCapabilityRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418347: fltTcaBgpPeerRoute1dCapabilityRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418348: fltTcaBgpPeerRoute1wCapabilityRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418349: fltTcaBgpPeerRoute1moCapabilityRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418350: fltTcaBgpPeerRoute1qtrCapabilityRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418351: fltTcaBgpPeerRoute1yearCapabilityRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418376: fltTcaBgpPeerRoute5minCapabilityRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418377: fltTcaBgpPeerRoute15minCapabilityRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418378: fltTcaBgpPeerRoute1hCapabilityRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418379: fltTcaBgpPeerRoute1dCapabilityRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418380: fltTcaBgpPeerRoute1wCapabilityRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418381: fltTcaBgpPeerRoute1moCapabilityRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418382: fltTcaBgpPeerRoute1qtrCapabilityRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418383: fltTcaBgpPeerRoute1yearCapabilityRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418384: fltTcaBgpPeerRoute5minCapabilityRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418385: fltTcaBgpPeerRoute15minCapabilityRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418386: fltTcaBgpPeerRoute1hCapabilityRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418387: fltTcaBgpPeerRoute1dCapabilityRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418388: fltTcaBgpPeerRoute1wCapabilityRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418389: fltTcaBgpPeerRoute1moCapabilityRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418390: fltTcaBgpPeerRoute1qtrCapabilityRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418391: fltTcaBgpPeerRoute1yearCapabilityRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4184: fltFvRsCtxToCloudVrfRouteLeakPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F418464: fltTcaBgpPeerRoute5minCapabilitySentLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418465: fltTcaBgpPeerRoute15minCapabilitySentLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418466: fltTcaBgpPeerRoute1hCapabilitySentLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418467: fltTcaBgpPeerRoute1dCapabilitySentLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418468: fltTcaBgpPeerRoute1wCapabilitySentLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418469: fltTcaBgpPeerRoute1moCapabilitySentLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418470: fltTcaBgpPeerRoute1qtrCapabilitySentLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418471: fltTcaBgpPeerRoute1yearCapabilitySentLast
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418480: fltTcaBgpPeerRoute5minCapabilitySentCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418481: fltTcaBgpPeerRoute15minCapabilitySentCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418482: fltTcaBgpPeerRoute1hCapabilitySentCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418483: fltTcaBgpPeerRoute1dCapabilitySentCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418484: fltTcaBgpPeerRoute1wCapabilitySentCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418485: fltTcaBgpPeerRoute1moCapabilitySentCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418486: fltTcaBgpPeerRoute1qtrCapabilitySentCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418487: fltTcaBgpPeerRoute1yearCapabilitySentCum
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418488: fltTcaBgpPeerRoute5minCapabilitySentPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418489: fltTcaBgpPeerRoute15minCapabilitySentPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418490: fltTcaBgpPeerRoute1hCapabilitySentPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418491: fltTcaBgpPeerRoute1dCapabilitySentPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418492: fltTcaBgpPeerRoute1wCapabilitySentPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418493: fltTcaBgpPeerRoute1moCapabilitySentPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418494: fltTcaBgpPeerRoute1qtrCapabilitySentPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418495: fltTcaBgpPeerRoute1yearCapabilitySentPer
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418496: fltTcaBgpPeerRoute5minCapabilitySentMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418497: fltTcaBgpPeerRoute15minCapabilitySentMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418498: fltTcaBgpPeerRoute1hCapabilitySentMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418499: fltTcaBgpPeerRoute1dCapabilitySentMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4185: fltHinventoryRsSubnetToCtxResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F418500: fltTcaBgpPeerRoute1wCapabilitySentMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418501: fltTcaBgpPeerRoute1moCapabilitySentMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418502: fltTcaBgpPeerRoute1qtrCapabilitySentMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418503: fltTcaBgpPeerRoute1yearCapabilitySentMin
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418504: fltTcaBgpPeerRoute5minCapabilitySentMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418505: fltTcaBgpPeerRoute15minCapabilitySentMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418506: fltTcaBgpPeerRoute1hCapabilitySentMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418507: fltTcaBgpPeerRoute1dCapabilitySentMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418508: fltTcaBgpPeerRoute1wCapabilitySentMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418509: fltTcaBgpPeerRoute1moCapabilitySentMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418510: fltTcaBgpPeerRoute1qtrCapabilitySentMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418511: fltTcaBgpPeerRoute1yearCapabilitySentMax
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418512: fltTcaBgpPeerRoute5minCapabilitySentAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418513: fltTcaBgpPeerRoute15minCapabilitySentAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418514: fltTcaBgpPeerRoute1hCapabilitySentAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418515: fltTcaBgpPeerRoute1dCapabilitySentAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418516: fltTcaBgpPeerRoute1wCapabilitySentAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418517: fltTcaBgpPeerRoute1moCapabilitySentAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418518: fltTcaBgpPeerRoute1qtrCapabilitySentAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418519: fltTcaBgpPeerRoute1yearCapabilitySentAvg
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418544: fltTcaBgpPeerRoute5minCapabilitySentTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418545: fltTcaBgpPeerRoute15minCapabilitySentTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418546: fltTcaBgpPeerRoute1hCapabilitySentTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418547: fltTcaBgpPeerRoute1dCapabilitySentTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418548: fltTcaBgpPeerRoute1wCapabilitySentTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418549: fltTcaBgpPeerRoute1moCapabilitySentTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418550: fltTcaBgpPeerRoute1qtrCapabilitySentTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418551: fltTcaBgpPeerRoute1yearCapabilitySentTr
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418552: fltTcaBgpPeerRoute5minCapabilitySentRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418553: fltTcaBgpPeerRoute15minCapabilitySentRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418554: fltTcaBgpPeerRoute1hCapabilitySentRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418555: fltTcaBgpPeerRoute1dCapabilitySentRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418556: fltTcaBgpPeerRoute1wCapabilitySentRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418557: fltTcaBgpPeerRoute1moCapabilitySentRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418558: fltTcaBgpPeerRoute1qtrCapabilitySentRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418559: fltTcaBgpPeerRoute1yearCapabilitySentRate
Severity: variable
Explanation: This fault is caused by "Number of Capability Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Capability Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4186: fltHinventoryRsConnToRouterResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F418632: fltTcaBgpPeerRoute5minRouteRefreshRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418633: fltTcaBgpPeerRoute15minRouteRefreshRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418634: fltTcaBgpPeerRoute1hRouteRefreshRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418635: fltTcaBgpPeerRoute1dRouteRefreshRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418636: fltTcaBgpPeerRoute1wRouteRefreshRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418637: fltTcaBgpPeerRoute1moRouteRefreshRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418638: fltTcaBgpPeerRoute1qtrRouteRefreshRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418639: fltTcaBgpPeerRoute1yearRouteRefreshRcvdLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418648: fltTcaBgpPeerRoute5minRouteRefreshRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418649: fltTcaBgpPeerRoute15minRouteRefreshRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418650: fltTcaBgpPeerRoute1hRouteRefreshRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418651: fltTcaBgpPeerRoute1dRouteRefreshRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418652: fltTcaBgpPeerRoute1wRouteRefreshRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418653: fltTcaBgpPeerRoute1moRouteRefreshRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418654: fltTcaBgpPeerRoute1qtrRouteRefreshRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418655: fltTcaBgpPeerRoute1yearRouteRefreshRcvdCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418656: fltTcaBgpPeerRoute5minRouteRefreshRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418657: fltTcaBgpPeerRoute15minRouteRefreshRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418658: fltTcaBgpPeerRoute1hRouteRefreshRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418659: fltTcaBgpPeerRoute1dRouteRefreshRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418660: fltTcaBgpPeerRoute1wRouteRefreshRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418661: fltTcaBgpPeerRoute1moRouteRefreshRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418662: fltTcaBgpPeerRoute1qtrRouteRefreshRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418663: fltTcaBgpPeerRoute1yearRouteRefreshRcvdPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418664: fltTcaBgpPeerRoute5minRouteRefreshRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418665: fltTcaBgpPeerRoute15minRouteRefreshRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418666: fltTcaBgpPeerRoute1hRouteRefreshRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418667: fltTcaBgpPeerRoute1dRouteRefreshRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418668: fltTcaBgpPeerRoute1wRouteRefreshRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418669: fltTcaBgpPeerRoute1moRouteRefreshRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418670: fltTcaBgpPeerRoute1qtrRouteRefreshRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418671: fltTcaBgpPeerRoute1yearRouteRefreshRcvdMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418672: fltTcaBgpPeerRoute5minRouteRefreshRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418673: fltTcaBgpPeerRoute15minRouteRefreshRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418674: fltTcaBgpPeerRoute1hRouteRefreshRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418675: fltTcaBgpPeerRoute1dRouteRefreshRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418676: fltTcaBgpPeerRoute1wRouteRefreshRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418677: fltTcaBgpPeerRoute1moRouteRefreshRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418678: fltTcaBgpPeerRoute1qtrRouteRefreshRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418679: fltTcaBgpPeerRoute1yearRouteRefreshRcvdMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418680: fltTcaBgpPeerRoute5minRouteRefreshRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418681: fltTcaBgpPeerRoute15minRouteRefreshRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418682: fltTcaBgpPeerRoute1hRouteRefreshRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418683: fltTcaBgpPeerRoute1dRouteRefreshRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418684: fltTcaBgpPeerRoute1wRouteRefreshRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418685: fltTcaBgpPeerRoute1moRouteRefreshRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418686: fltTcaBgpPeerRoute1qtrRouteRefreshRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418687: fltTcaBgpPeerRoute1yearRouteRefreshRcvdAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418712: fltTcaBgpPeerRoute5minRouteRefreshRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418713: fltTcaBgpPeerRoute15minRouteRefreshRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418714: fltTcaBgpPeerRoute1hRouteRefreshRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418715: fltTcaBgpPeerRoute1dRouteRefreshRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418716: fltTcaBgpPeerRoute1wRouteRefreshRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418717: fltTcaBgpPeerRoute1moRouteRefreshRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418718: fltTcaBgpPeerRoute1qtrRouteRefreshRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418719: fltTcaBgpPeerRoute1yearRouteRefreshRcvdTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418720: fltTcaBgpPeerRoute5minRouteRefreshRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418721: fltTcaBgpPeerRoute15minRouteRefreshRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418722: fltTcaBgpPeerRoute1hRouteRefreshRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418723: fltTcaBgpPeerRoute1dRouteRefreshRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418724: fltTcaBgpPeerRoute1wRouteRefreshRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418725: fltTcaBgpPeerRoute1moRouteRefreshRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418726: fltTcaBgpPeerRoute1qtrRouteRefreshRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418727: fltTcaBgpPeerRoute1yearRouteRefreshRcvdRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4188: fltCloudRsAccountToAccessPolicyResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F418800: fltTcaBgpPeerRoute5minRouteRefreshSentLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418801: fltTcaBgpPeerRoute15minRouteRefreshSentLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418802: fltTcaBgpPeerRoute1hRouteRefreshSentLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418803: fltTcaBgpPeerRoute1dRouteRefreshSentLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418804: fltTcaBgpPeerRoute1wRouteRefreshSentLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418805: fltTcaBgpPeerRoute1moRouteRefreshSentLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418806: fltTcaBgpPeerRoute1qtrRouteRefreshSentLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418807: fltTcaBgpPeerRoute1yearRouteRefreshSentLast
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418816: fltTcaBgpPeerRoute5minRouteRefreshSentCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418817: fltTcaBgpPeerRoute15minRouteRefreshSentCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418818: fltTcaBgpPeerRoute1hRouteRefreshSentCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418819: fltTcaBgpPeerRoute1dRouteRefreshSentCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418820: fltTcaBgpPeerRoute1wRouteRefreshSentCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418821: fltTcaBgpPeerRoute1moRouteRefreshSentCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418822: fltTcaBgpPeerRoute1qtrRouteRefreshSentCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418823: fltTcaBgpPeerRoute1yearRouteRefreshSentCum
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418824: fltTcaBgpPeerRoute5minRouteRefreshSentPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418825: fltTcaBgpPeerRoute15minRouteRefreshSentPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418826: fltTcaBgpPeerRoute1hRouteRefreshSentPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418827: fltTcaBgpPeerRoute1dRouteRefreshSentPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418828: fltTcaBgpPeerRoute1wRouteRefreshSentPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418829: fltTcaBgpPeerRoute1moRouteRefreshSentPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418830: fltTcaBgpPeerRoute1qtrRouteRefreshSentPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418831: fltTcaBgpPeerRoute1yearRouteRefreshSentPer
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418832: fltTcaBgpPeerRoute5minRouteRefreshSentMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418833: fltTcaBgpPeerRoute15minRouteRefreshSentMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418834: fltTcaBgpPeerRoute1hRouteRefreshSentMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418835: fltTcaBgpPeerRoute1dRouteRefreshSentMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418836: fltTcaBgpPeerRoute1wRouteRefreshSentMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418837: fltTcaBgpPeerRoute1moRouteRefreshSentMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418838: fltTcaBgpPeerRoute1qtrRouteRefreshSentMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418839: fltTcaBgpPeerRoute1yearRouteRefreshSentMin
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418840: fltTcaBgpPeerRoute5minRouteRefreshSentMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418841: fltTcaBgpPeerRoute15minRouteRefreshSentMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418842: fltTcaBgpPeerRoute1hRouteRefreshSentMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418843: fltTcaBgpPeerRoute1dRouteRefreshSentMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418844: fltTcaBgpPeerRoute1wRouteRefreshSentMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418845: fltTcaBgpPeerRoute1moRouteRefreshSentMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418846: fltTcaBgpPeerRoute1qtrRouteRefreshSentMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418847: fltTcaBgpPeerRoute1yearRouteRefreshSentMax
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418848: fltTcaBgpPeerRoute5minRouteRefreshSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418849: fltTcaBgpPeerRoute15minRouteRefreshSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418850: fltTcaBgpPeerRoute1hRouteRefreshSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418851: fltTcaBgpPeerRoute1dRouteRefreshSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418852: fltTcaBgpPeerRoute1wRouteRefreshSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418853: fltTcaBgpPeerRoute1moRouteRefreshSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418854: fltTcaBgpPeerRoute1qtrRouteRefreshSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418855: fltTcaBgpPeerRoute1yearRouteRefreshSentAvg
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418880: fltTcaBgpPeerRoute5minRouteRefreshSentTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418881: fltTcaBgpPeerRoute15minRouteRefreshSentTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418882: fltTcaBgpPeerRoute1hRouteRefreshSentTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418883: fltTcaBgpPeerRoute1dRouteRefreshSentTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418884: fltTcaBgpPeerRoute1wRouteRefreshSentTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418885: fltTcaBgpPeerRoute1moRouteRefreshSentTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418886: fltTcaBgpPeerRoute1qtrRouteRefreshSentTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418887: fltTcaBgpPeerRoute1yearRouteRefreshSentTr
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418888: fltTcaBgpPeerRoute5minRouteRefreshSentRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418889: fltTcaBgpPeerRoute15minRouteRefreshSentRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418890: fltTcaBgpPeerRoute1hRouteRefreshSentRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418891: fltTcaBgpPeerRoute1dRouteRefreshSentRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418892: fltTcaBgpPeerRoute1wRouteRefreshSentRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418893: fltTcaBgpPeerRoute1moRouteRefreshSentRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418894: fltTcaBgpPeerRoute1qtrRouteRefreshSentRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418895: fltTcaBgpPeerRoute1yearRouteRefreshSentRate
Severity: variable
Explanation: This fault is caused by "Number of Route Refresh Messages Sent rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Number of Route Refresh Messages Sent" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4189: fltCloudRsCtxProfileToAccessPolicyResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F418968: fltTcaOspfBadErrPktStats5minBadAuthPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418969: fltTcaOspfBadErrPktStats15minBadAuthPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418970: fltTcaOspfBadErrPktStats1hBadAuthPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418971: fltTcaOspfBadErrPktStats1dBadAuthPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418972: fltTcaOspfBadErrPktStats1wBadAuthPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418973: fltTcaOspfBadErrPktStats1moBadAuthPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418974: fltTcaOspfBadErrPktStats1qtrBadAuthPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418975: fltTcaOspfBadErrPktStats1yearBadAuthPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418984: fltTcaOspfBadErrPktStats5minBadAuthPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418985: fltTcaOspfBadErrPktStats15minBadAuthPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418986: fltTcaOspfBadErrPktStats1hBadAuthPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418987: fltTcaOspfBadErrPktStats1dBadAuthPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418988: fltTcaOspfBadErrPktStats1wBadAuthPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418989: fltTcaOspfBadErrPktStats1moBadAuthPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418990: fltTcaOspfBadErrPktStats1qtrBadAuthPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418991: fltTcaOspfBadErrPktStats1yearBadAuthPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418992: fltTcaOspfBadErrPktStats5minBadAuthPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418993: fltTcaOspfBadErrPktStats15minBadAuthPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418994: fltTcaOspfBadErrPktStats1hBadAuthPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418995: fltTcaOspfBadErrPktStats1dBadAuthPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418996: fltTcaOspfBadErrPktStats1wBadAuthPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418997: fltTcaOspfBadErrPktStats1moBadAuthPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418998: fltTcaOspfBadErrPktStats1qtrBadAuthPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F418999: fltTcaOspfBadErrPktStats1yearBadAuthPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4190: fltHcloudRsCtxToAccessPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F419000: fltTcaOspfBadErrPktStats5minBadAuthPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419001: fltTcaOspfBadErrPktStats15minBadAuthPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419002: fltTcaOspfBadErrPktStats1hBadAuthPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419003: fltTcaOspfBadErrPktStats1dBadAuthPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419004: fltTcaOspfBadErrPktStats1wBadAuthPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419005: fltTcaOspfBadErrPktStats1moBadAuthPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419006: fltTcaOspfBadErrPktStats1qtrBadAuthPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419007: fltTcaOspfBadErrPktStats1yearBadAuthPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419008: fltTcaOspfBadErrPktStats5minBadAuthPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419009: fltTcaOspfBadErrPktStats15minBadAuthPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419010: fltTcaOspfBadErrPktStats1hBadAuthPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419011: fltTcaOspfBadErrPktStats1dBadAuthPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419012: fltTcaOspfBadErrPktStats1wBadAuthPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419013: fltTcaOspfBadErrPktStats1moBadAuthPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419014: fltTcaOspfBadErrPktStats1qtrBadAuthPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419015: fltTcaOspfBadErrPktStats1yearBadAuthPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419016: fltTcaOspfBadErrPktStats5minBadAuthPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419017: fltTcaOspfBadErrPktStats15minBadAuthPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419018: fltTcaOspfBadErrPktStats1hBadAuthPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419019: fltTcaOspfBadErrPktStats1dBadAuthPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419020: fltTcaOspfBadErrPktStats1wBadAuthPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419021: fltTcaOspfBadErrPktStats1moBadAuthPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419022: fltTcaOspfBadErrPktStats1qtrBadAuthPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419023: fltTcaOspfBadErrPktStats1yearBadAuthPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419048: fltTcaOspfBadErrPktStats5minBadAuthPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419049: fltTcaOspfBadErrPktStats15minBadAuthPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419050: fltTcaOspfBadErrPktStats1hBadAuthPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419051: fltTcaOspfBadErrPktStats1dBadAuthPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419052: fltTcaOspfBadErrPktStats1wBadAuthPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419053: fltTcaOspfBadErrPktStats1moBadAuthPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419054: fltTcaOspfBadErrPktStats1qtrBadAuthPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419055: fltTcaOspfBadErrPktStats1yearBadAuthPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419056: fltTcaOspfBadErrPktStats5minBadAuthPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419057: fltTcaOspfBadErrPktStats15minBadAuthPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419058: fltTcaOspfBadErrPktStats1hBadAuthPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419059: fltTcaOspfBadErrPktStats1dBadAuthPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419060: fltTcaOspfBadErrPktStats1wBadAuthPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419061: fltTcaOspfBadErrPktStats1moBadAuthPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419062: fltTcaOspfBadErrPktStats1qtrBadAuthPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419063: fltTcaOspfBadErrPktStats1yearBadAuthPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Authentication Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Authentication Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4191: fltHcloudRsProvAcctToAccessPolResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F419136: fltTcaOspfBadErrPktStats5minBadCRCPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419137: fltTcaOspfBadErrPktStats15minBadCRCPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419138: fltTcaOspfBadErrPktStats1hBadCRCPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419139: fltTcaOspfBadErrPktStats1dBadCRCPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419140: fltTcaOspfBadErrPktStats1wBadCRCPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419141: fltTcaOspfBadErrPktStats1moBadCRCPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419142: fltTcaOspfBadErrPktStats1qtrBadCRCPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419143: fltTcaOspfBadErrPktStats1yearBadCRCPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419152: fltTcaOspfBadErrPktStats5minBadCRCPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419153: fltTcaOspfBadErrPktStats15minBadCRCPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419154: fltTcaOspfBadErrPktStats1hBadCRCPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419155: fltTcaOspfBadErrPktStats1dBadCRCPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419156: fltTcaOspfBadErrPktStats1wBadCRCPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419157: fltTcaOspfBadErrPktStats1moBadCRCPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419158: fltTcaOspfBadErrPktStats1qtrBadCRCPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419159: fltTcaOspfBadErrPktStats1yearBadCRCPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419160: fltTcaOspfBadErrPktStats5minBadCRCPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419161: fltTcaOspfBadErrPktStats15minBadCRCPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419162: fltTcaOspfBadErrPktStats1hBadCRCPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419163: fltTcaOspfBadErrPktStats1dBadCRCPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419164: fltTcaOspfBadErrPktStats1wBadCRCPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419165: fltTcaOspfBadErrPktStats1moBadCRCPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419166: fltTcaOspfBadErrPktStats1qtrBadCRCPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419167: fltTcaOspfBadErrPktStats1yearBadCRCPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419168: fltTcaOspfBadErrPktStats5minBadCRCPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419169: fltTcaOspfBadErrPktStats15minBadCRCPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419170: fltTcaOspfBadErrPktStats1hBadCRCPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419171: fltTcaOspfBadErrPktStats1dBadCRCPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419172: fltTcaOspfBadErrPktStats1wBadCRCPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419173: fltTcaOspfBadErrPktStats1moBadCRCPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419174: fltTcaOspfBadErrPktStats1qtrBadCRCPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419175: fltTcaOspfBadErrPktStats1yearBadCRCPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419176: fltTcaOspfBadErrPktStats5minBadCRCPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419177: fltTcaOspfBadErrPktStats15minBadCRCPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419178: fltTcaOspfBadErrPktStats1hBadCRCPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419179: fltTcaOspfBadErrPktStats1dBadCRCPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419180: fltTcaOspfBadErrPktStats1wBadCRCPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419181: fltTcaOspfBadErrPktStats1moBadCRCPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419182: fltTcaOspfBadErrPktStats1qtrBadCRCPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419183: fltTcaOspfBadErrPktStats1yearBadCRCPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419184: fltTcaOspfBadErrPktStats5minBadCRCPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419185: fltTcaOspfBadErrPktStats15minBadCRCPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419186: fltTcaOspfBadErrPktStats1hBadCRCPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419187: fltTcaOspfBadErrPktStats1dBadCRCPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419188: fltTcaOspfBadErrPktStats1wBadCRCPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419189: fltTcaOspfBadErrPktStats1moBadCRCPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419190: fltTcaOspfBadErrPktStats1qtrBadCRCPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419191: fltTcaOspfBadErrPktStats1yearBadCRCPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4192: fltPtpIfPtpInterfaceProfileMismatch
Severity: minor
Explanation: This fault occurs when Interface level Telecom profile configured is not same as node-level profile or Telecom profile is not supported.
- If you are still seeing this, create tech-support ticket and contact Cisco TAC
F419216: fltTcaOspfBadErrPktStats5minBadCRCPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419217: fltTcaOspfBadErrPktStats15minBadCRCPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419218: fltTcaOspfBadErrPktStats1hBadCRCPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419219: fltTcaOspfBadErrPktStats1dBadCRCPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419220: fltTcaOspfBadErrPktStats1wBadCRCPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419221: fltTcaOspfBadErrPktStats1moBadCRCPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419222: fltTcaOspfBadErrPktStats1qtrBadCRCPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419223: fltTcaOspfBadErrPktStats1yearBadCRCPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419224: fltTcaOspfBadErrPktStats5minBadCRCPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419225: fltTcaOspfBadErrPktStats15minBadCRCPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419226: fltTcaOspfBadErrPktStats1hBadCRCPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419227: fltTcaOspfBadErrPktStats1dBadCRCPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419228: fltTcaOspfBadErrPktStats1wBadCRCPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419229: fltTcaOspfBadErrPktStats1moBadCRCPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419230: fltTcaOspfBadErrPktStats1qtrBadCRCPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419231: fltTcaOspfBadErrPktStats1yearBadCRCPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad CRC Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad CRC Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4193: fltPtpIfPtpOverrideFlagNotEnabled
Severity: minor
Explanation: This fault occurs when the PTP override flag is not enabled in the configuration.
- If you are still seeing this, create tech-support ticket and contact Cisco TAC
F419304: fltTcaOspfBadPktStats5minBadLenPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419305: fltTcaOspfBadPktStats15minBadLenPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419306: fltTcaOspfBadPktStats1hBadLenPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419307: fltTcaOspfBadPktStats1dBadLenPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419308: fltTcaOspfBadPktStats1wBadLenPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419309: fltTcaOspfBadPktStats1moBadLenPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419310: fltTcaOspfBadPktStats1qtrBadLenPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419311: fltTcaOspfBadPktStats1yearBadLenPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419320: fltTcaOspfBadPktStats5minBadLenPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419321: fltTcaOspfBadPktStats15minBadLenPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419322: fltTcaOspfBadPktStats1hBadLenPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419323: fltTcaOspfBadPktStats1dBadLenPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419324: fltTcaOspfBadPktStats1wBadLenPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419325: fltTcaOspfBadPktStats1moBadLenPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419326: fltTcaOspfBadPktStats1qtrBadLenPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419327: fltTcaOspfBadPktStats1yearBadLenPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419328: fltTcaOspfBadPktStats5minBadLenPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419329: fltTcaOspfBadPktStats15minBadLenPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419330: fltTcaOspfBadPktStats1hBadLenPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419331: fltTcaOspfBadPktStats1dBadLenPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419332: fltTcaOspfBadPktStats1wBadLenPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419333: fltTcaOspfBadPktStats1moBadLenPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419334: fltTcaOspfBadPktStats1qtrBadLenPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419335: fltTcaOspfBadPktStats1yearBadLenPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419336: fltTcaOspfBadPktStats5minBadLenPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419337: fltTcaOspfBadPktStats15minBadLenPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419338: fltTcaOspfBadPktStats1hBadLenPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419339: fltTcaOspfBadPktStats1dBadLenPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419340: fltTcaOspfBadPktStats1wBadLenPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419341: fltTcaOspfBadPktStats1moBadLenPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419342: fltTcaOspfBadPktStats1qtrBadLenPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419343: fltTcaOspfBadPktStats1yearBadLenPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419344: fltTcaOspfBadPktStats5minBadLenPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419345: fltTcaOspfBadPktStats15minBadLenPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419346: fltTcaOspfBadPktStats1hBadLenPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419347: fltTcaOspfBadPktStats1dBadLenPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419348: fltTcaOspfBadPktStats1wBadLenPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419349: fltTcaOspfBadPktStats1moBadLenPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419350: fltTcaOspfBadPktStats1qtrBadLenPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419351: fltTcaOspfBadPktStats1yearBadLenPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419352: fltTcaOspfBadPktStats5minBadLenPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419353: fltTcaOspfBadPktStats15minBadLenPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419354: fltTcaOspfBadPktStats1hBadLenPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419355: fltTcaOspfBadPktStats1dBadLenPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419356: fltTcaOspfBadPktStats1wBadLenPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419357: fltTcaOspfBadPktStats1moBadLenPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419358: fltTcaOspfBadPktStats1qtrBadLenPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419359: fltTcaOspfBadPktStats1yearBadLenPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419384: fltTcaOspfBadPktStats5minBadLenPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419385: fltTcaOspfBadPktStats15minBadLenPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419386: fltTcaOspfBadPktStats1hBadLenPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419387: fltTcaOspfBadPktStats1dBadLenPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419388: fltTcaOspfBadPktStats1wBadLenPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419389: fltTcaOspfBadPktStats1moBadLenPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419390: fltTcaOspfBadPktStats1qtrBadLenPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419391: fltTcaOspfBadPktStats1yearBadLenPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419392: fltTcaOspfBadPktStats5minBadLenPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419393: fltTcaOspfBadPktStats15minBadLenPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419394: fltTcaOspfBadPktStats1hBadLenPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419395: fltTcaOspfBadPktStats1dBadLenPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419396: fltTcaOspfBadPktStats1wBadLenPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419397: fltTcaOspfBadPktStats1moBadLenPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419398: fltTcaOspfBadPktStats1qtrBadLenPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419399: fltTcaOspfBadPktStats1yearBadLenPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Length Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Length Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4194: fltPtpIfPtpUnicastEnabledForTelecomProf
Severity: minor
Explanation: This fault occurs when the PTP unicast configuration applied with telecom profile.
- If you are still seeing this, create tech-support ticket and contact Cisco TAC
F419472: fltTcaOspfBadPktStats5minBadResvFieldPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419473: fltTcaOspfBadPktStats15minBadResvFieldPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419474: fltTcaOspfBadPktStats1hBadResvFieldPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419475: fltTcaOspfBadPktStats1dBadResvFieldPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419476: fltTcaOspfBadPktStats1wBadResvFieldPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419477: fltTcaOspfBadPktStats1moBadResvFieldPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419478: fltTcaOspfBadPktStats1qtrBadResvFieldPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419479: fltTcaOspfBadPktStats1yearBadResvFieldPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419488: fltTcaOspfBadPktStats5minBadResvFieldPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419489: fltTcaOspfBadPktStats15minBadResvFieldPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419490: fltTcaOspfBadPktStats1hBadResvFieldPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419491: fltTcaOspfBadPktStats1dBadResvFieldPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419492: fltTcaOspfBadPktStats1wBadResvFieldPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419493: fltTcaOspfBadPktStats1moBadResvFieldPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419494: fltTcaOspfBadPktStats1qtrBadResvFieldPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419495: fltTcaOspfBadPktStats1yearBadResvFieldPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419496: fltTcaOspfBadPktStats5minBadResvFieldPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419497: fltTcaOspfBadPktStats15minBadResvFieldPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419498: fltTcaOspfBadPktStats1hBadResvFieldPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419499: fltTcaOspfBadPktStats1dBadResvFieldPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4195: fltFvESgConfig-warning
Severity: warning
Explanation: This fault occurs when an End Point Security Group is not correctly configred
- Look at the configuration for issues
- Verify the End Point Security Group configuration is correct and complete
- If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.
F419500: fltTcaOspfBadPktStats1wBadResvFieldPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419501: fltTcaOspfBadPktStats1moBadResvFieldPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419502: fltTcaOspfBadPktStats1qtrBadResvFieldPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419503: fltTcaOspfBadPktStats1yearBadResvFieldPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419504: fltTcaOspfBadPktStats5minBadResvFieldPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419505: fltTcaOspfBadPktStats15minBadResvFieldPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419506: fltTcaOspfBadPktStats1hBadResvFieldPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419507: fltTcaOspfBadPktStats1dBadResvFieldPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419508: fltTcaOspfBadPktStats1wBadResvFieldPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419509: fltTcaOspfBadPktStats1moBadResvFieldPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419510: fltTcaOspfBadPktStats1qtrBadResvFieldPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419511: fltTcaOspfBadPktStats1yearBadResvFieldPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419512: fltTcaOspfBadPktStats5minBadResvFieldPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419513: fltTcaOspfBadPktStats15minBadResvFieldPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419514: fltTcaOspfBadPktStats1hBadResvFieldPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419515: fltTcaOspfBadPktStats1dBadResvFieldPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419516: fltTcaOspfBadPktStats1wBadResvFieldPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419517: fltTcaOspfBadPktStats1moBadResvFieldPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419518: fltTcaOspfBadPktStats1qtrBadResvFieldPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419519: fltTcaOspfBadPktStats1yearBadResvFieldPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419520: fltTcaOspfBadPktStats5minBadResvFieldPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419521: fltTcaOspfBadPktStats15minBadResvFieldPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419522: fltTcaOspfBadPktStats1hBadResvFieldPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419523: fltTcaOspfBadPktStats1dBadResvFieldPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419524: fltTcaOspfBadPktStats1wBadResvFieldPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419525: fltTcaOspfBadPktStats1moBadResvFieldPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419526: fltTcaOspfBadPktStats1qtrBadResvFieldPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419527: fltTcaOspfBadPktStats1yearBadResvFieldPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419552: fltTcaOspfBadPktStats5minBadResvFieldPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419553: fltTcaOspfBadPktStats15minBadResvFieldPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419554: fltTcaOspfBadPktStats1hBadResvFieldPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419555: fltTcaOspfBadPktStats1dBadResvFieldPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419556: fltTcaOspfBadPktStats1wBadResvFieldPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419557: fltTcaOspfBadPktStats1moBadResvFieldPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419558: fltTcaOspfBadPktStats1qtrBadResvFieldPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419559: fltTcaOspfBadPktStats1yearBadResvFieldPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419560: fltTcaOspfBadPktStats5minBadResvFieldPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419561: fltTcaOspfBadPktStats15minBadResvFieldPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419562: fltTcaOspfBadPktStats1hBadResvFieldPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419563: fltTcaOspfBadPktStats1dBadResvFieldPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419564: fltTcaOspfBadPktStats1wBadResvFieldPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419565: fltTcaOspfBadPktStats1moBadResvFieldPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419566: fltTcaOspfBadPktStats1qtrBadResvFieldPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419567: fltTcaOspfBadPktStats1yearBadResvFieldPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Reserved Field Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Reserved Field Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4196: fltPimInterVRFConfIssue
Severity: minor
Explanation: This fault occurs because source VRF and source EPGs is not present on the leaf with the receiver VRF.
Recommended Action: If you see this fault, please verify the source VRF in interVRF policy is deployed on the leaf.
F419640: fltTcaOspfBadPktStats5minBadVersionPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419641: fltTcaOspfBadPktStats15minBadVersionPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419642: fltTcaOspfBadPktStats1hBadVersionPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419643: fltTcaOspfBadPktStats1dBadVersionPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419644: fltTcaOspfBadPktStats1wBadVersionPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419645: fltTcaOspfBadPktStats1moBadVersionPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419646: fltTcaOspfBadPktStats1qtrBadVersionPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419647: fltTcaOspfBadPktStats1yearBadVersionPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419656: fltTcaOspfBadPktStats5minBadVersionPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419657: fltTcaOspfBadPktStats15minBadVersionPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419658: fltTcaOspfBadPktStats1hBadVersionPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419659: fltTcaOspfBadPktStats1dBadVersionPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419660: fltTcaOspfBadPktStats1wBadVersionPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419661: fltTcaOspfBadPktStats1moBadVersionPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419662: fltTcaOspfBadPktStats1qtrBadVersionPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419663: fltTcaOspfBadPktStats1yearBadVersionPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419664: fltTcaOspfBadPktStats5minBadVersionPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419665: fltTcaOspfBadPktStats15minBadVersionPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419666: fltTcaOspfBadPktStats1hBadVersionPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419667: fltTcaOspfBadPktStats1dBadVersionPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419668: fltTcaOspfBadPktStats1wBadVersionPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419669: fltTcaOspfBadPktStats1moBadVersionPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419670: fltTcaOspfBadPktStats1qtrBadVersionPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419671: fltTcaOspfBadPktStats1yearBadVersionPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419672: fltTcaOspfBadPktStats5minBadVersionPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419673: fltTcaOspfBadPktStats15minBadVersionPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419674: fltTcaOspfBadPktStats1hBadVersionPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419675: fltTcaOspfBadPktStats1dBadVersionPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419676: fltTcaOspfBadPktStats1wBadVersionPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419677: fltTcaOspfBadPktStats1moBadVersionPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419678: fltTcaOspfBadPktStats1qtrBadVersionPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419679: fltTcaOspfBadPktStats1yearBadVersionPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419680: fltTcaOspfBadPktStats5minBadVersionPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419681: fltTcaOspfBadPktStats15minBadVersionPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419682: fltTcaOspfBadPktStats1hBadVersionPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419683: fltTcaOspfBadPktStats1dBadVersionPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419684: fltTcaOspfBadPktStats1wBadVersionPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419685: fltTcaOspfBadPktStats1moBadVersionPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419686: fltTcaOspfBadPktStats1qtrBadVersionPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419687: fltTcaOspfBadPktStats1yearBadVersionPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419688: fltTcaOspfBadPktStats5minBadVersionPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419689: fltTcaOspfBadPktStats15minBadVersionPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419690: fltTcaOspfBadPktStats1hBadVersionPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419691: fltTcaOspfBadPktStats1dBadVersionPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419692: fltTcaOspfBadPktStats1wBadVersionPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419693: fltTcaOspfBadPktStats1moBadVersionPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419694: fltTcaOspfBadPktStats1qtrBadVersionPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419695: fltTcaOspfBadPktStats1yearBadVersionPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4197: fltSvcredirRsDestAttConfigStFailed2
Severity: major
Explanation: This fault occurs when a PBR service destination is used with multiple health groups
- Use the destination with single health group
- To recover, delete this destination from all PBR policies where its used, then add the destination with correct health group
F419720: fltTcaOspfBadPktStats5minBadVersionPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419721: fltTcaOspfBadPktStats15minBadVersionPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419722: fltTcaOspfBadPktStats1hBadVersionPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419723: fltTcaOspfBadPktStats1dBadVersionPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419724: fltTcaOspfBadPktStats1wBadVersionPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419725: fltTcaOspfBadPktStats1moBadVersionPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419726: fltTcaOspfBadPktStats1qtrBadVersionPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419727: fltTcaOspfBadPktStats1yearBadVersionPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419728: fltTcaOspfBadPktStats5minBadVersionPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419729: fltTcaOspfBadPktStats15minBadVersionPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419730: fltTcaOspfBadPktStats1hBadVersionPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419731: fltTcaOspfBadPktStats1dBadVersionPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419732: fltTcaOspfBadPktStats1wBadVersionPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419733: fltTcaOspfBadPktStats1moBadVersionPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419734: fltTcaOspfBadPktStats1qtrBadVersionPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419735: fltTcaOspfBadPktStats1yearBadVersionPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Bad Version Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Bad Version Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4198: fltSvcredirRsBackupDestAttConfigStFailed2
Severity: major
Explanation: This fault occurs when a PBR service destination is used with multiple health groups
- Use the destination with single health group
- To recover, delete this destination from all PBR policies where its used, then add the destination with correct health group
F419808: fltTcaOspfDropUnkStats5minRcvdPktsDroppedLast
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419809: fltTcaOspfDropUnkStats15minRcvdPktsDroppedLast
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419810: fltTcaOspfDropUnkStats1hRcvdPktsDroppedLast
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419811: fltTcaOspfDropUnkStats1dRcvdPktsDroppedLast
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419812: fltTcaOspfDropUnkStats1wRcvdPktsDroppedLast
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419813: fltTcaOspfDropUnkStats1moRcvdPktsDroppedLast
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419814: fltTcaOspfDropUnkStats1qtrRcvdPktsDroppedLast
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419815: fltTcaOspfDropUnkStats1yearRcvdPktsDroppedLast
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419824: fltTcaOspfDropUnkStats5minRcvdPktsDroppedCum
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419825: fltTcaOspfDropUnkStats15minRcvdPktsDroppedCum
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419826: fltTcaOspfDropUnkStats1hRcvdPktsDroppedCum
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419827: fltTcaOspfDropUnkStats1dRcvdPktsDroppedCum
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419828: fltTcaOspfDropUnkStats1wRcvdPktsDroppedCum
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419829: fltTcaOspfDropUnkStats1moRcvdPktsDroppedCum
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419830: fltTcaOspfDropUnkStats1qtrRcvdPktsDroppedCum
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419831: fltTcaOspfDropUnkStats1yearRcvdPktsDroppedCum
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419832: fltTcaOspfDropUnkStats5minRcvdPktsDroppedPer
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419833: fltTcaOspfDropUnkStats15minRcvdPktsDroppedPer
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419834: fltTcaOspfDropUnkStats1hRcvdPktsDroppedPer
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419835: fltTcaOspfDropUnkStats1dRcvdPktsDroppedPer
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419836: fltTcaOspfDropUnkStats1wRcvdPktsDroppedPer
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419837: fltTcaOspfDropUnkStats1moRcvdPktsDroppedPer
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419838: fltTcaOspfDropUnkStats1qtrRcvdPktsDroppedPer
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419839: fltTcaOspfDropUnkStats1yearRcvdPktsDroppedPer
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419840: fltTcaOspfDropUnkStats5minRcvdPktsDroppedMin
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419841: fltTcaOspfDropUnkStats15minRcvdPktsDroppedMin
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419842: fltTcaOspfDropUnkStats1hRcvdPktsDroppedMin
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419843: fltTcaOspfDropUnkStats1dRcvdPktsDroppedMin
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419844: fltTcaOspfDropUnkStats1wRcvdPktsDroppedMin
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419845: fltTcaOspfDropUnkStats1moRcvdPktsDroppedMin
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419846: fltTcaOspfDropUnkStats1qtrRcvdPktsDroppedMin
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419847: fltTcaOspfDropUnkStats1yearRcvdPktsDroppedMin
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419848: fltTcaOspfDropUnkStats5minRcvdPktsDroppedMax
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419849: fltTcaOspfDropUnkStats15minRcvdPktsDroppedMax
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419850: fltTcaOspfDropUnkStats1hRcvdPktsDroppedMax
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419851: fltTcaOspfDropUnkStats1dRcvdPktsDroppedMax
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419852: fltTcaOspfDropUnkStats1wRcvdPktsDroppedMax
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419853: fltTcaOspfDropUnkStats1moRcvdPktsDroppedMax
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419854: fltTcaOspfDropUnkStats1qtrRcvdPktsDroppedMax
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419855: fltTcaOspfDropUnkStats1yearRcvdPktsDroppedMax
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419856: fltTcaOspfDropUnkStats5minRcvdPktsDroppedAvg
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419857: fltTcaOspfDropUnkStats15minRcvdPktsDroppedAvg
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419858: fltTcaOspfDropUnkStats1hRcvdPktsDroppedAvg
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419859: fltTcaOspfDropUnkStats1dRcvdPktsDroppedAvg
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419860: fltTcaOspfDropUnkStats1wRcvdPktsDroppedAvg
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419861: fltTcaOspfDropUnkStats1moRcvdPktsDroppedAvg
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419862: fltTcaOspfDropUnkStats1qtrRcvdPktsDroppedAvg
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419863: fltTcaOspfDropUnkStats1yearRcvdPktsDroppedAvg
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419888: fltTcaOspfDropUnkStats5minRcvdPktsDroppedTr
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419889: fltTcaOspfDropUnkStats15minRcvdPktsDroppedTr
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419890: fltTcaOspfDropUnkStats1hRcvdPktsDroppedTr
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419891: fltTcaOspfDropUnkStats1dRcvdPktsDroppedTr
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419892: fltTcaOspfDropUnkStats1wRcvdPktsDroppedTr
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419893: fltTcaOspfDropUnkStats1moRcvdPktsDroppedTr
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419894: fltTcaOspfDropUnkStats1qtrRcvdPktsDroppedTr
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419895: fltTcaOspfDropUnkStats1yearRcvdPktsDroppedTr
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419896: fltTcaOspfDropUnkStats5minRcvdPktsDroppedRate
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419897: fltTcaOspfDropUnkStats15minRcvdPktsDroppedRate
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419898: fltTcaOspfDropUnkStats1hRcvdPktsDroppedRate
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419899: fltTcaOspfDropUnkStats1dRcvdPktsDroppedRate
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4199: fltHcloudCtxPeerOperCloudVNetPeeringProvisioningStateFailed
Severity: major
Explanation: This fault occurs when Azure failed to provision the peering resource.
- Please try deleting the VNet Peering and create it again.
- If fault still has not cleared, please contact Cisco TAC.
F419900: fltTcaOspfDropUnkStats1wRcvdPktsDroppedRate
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419901: fltTcaOspfDropUnkStats1moRcvdPktsDroppedRate
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419902: fltTcaOspfDropUnkStats1qtrRcvdPktsDroppedRate
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419903: fltTcaOspfDropUnkStats1yearRcvdPktsDroppedRate
Severity: variable
Explanation: This fault is caused by "Received Packets Dropped rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Received Packets Dropped" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419976: fltTcaOspfDropUnkStats5minUnknownPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419977: fltTcaOspfDropUnkStats15minUnknownPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419978: fltTcaOspfDropUnkStats1hUnknownPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419979: fltTcaOspfDropUnkStats1dUnknownPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419980: fltTcaOspfDropUnkStats1wUnknownPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419981: fltTcaOspfDropUnkStats1moUnknownPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419982: fltTcaOspfDropUnkStats1qtrUnknownPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419983: fltTcaOspfDropUnkStats1yearUnknownPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419992: fltTcaOspfDropUnkStats5minUnknownPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419993: fltTcaOspfDropUnkStats15minUnknownPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419994: fltTcaOspfDropUnkStats1hUnknownPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419995: fltTcaOspfDropUnkStats1dUnknownPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419996: fltTcaOspfDropUnkStats1wUnknownPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419997: fltTcaOspfDropUnkStats1moUnknownPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419998: fltTcaOspfDropUnkStats1qtrUnknownPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F419999: fltTcaOspfDropUnkStats1yearUnknownPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4200: fltHcloudASelectorEPGSelectorValidation
Severity: minor
Explanation: This fault occurs when the Selector given on the EPG cannot be applied in the context of the stated CtxProfile(VNET/VPC).
Recommended Action: If you see this fault, change or remove the faulty EpSelector on the EPG.
F420000: fltTcaOspfDropUnkStats5minUnknownPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420001: fltTcaOspfDropUnkStats15minUnknownPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420002: fltTcaOspfDropUnkStats1hUnknownPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420003: fltTcaOspfDropUnkStats1dUnknownPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420004: fltTcaOspfDropUnkStats1wUnknownPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420005: fltTcaOspfDropUnkStats1moUnknownPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420006: fltTcaOspfDropUnkStats1qtrUnknownPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420007: fltTcaOspfDropUnkStats1yearUnknownPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420008: fltTcaOspfDropUnkStats5minUnknownPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420009: fltTcaOspfDropUnkStats15minUnknownPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420010: fltTcaOspfDropUnkStats1hUnknownPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420011: fltTcaOspfDropUnkStats1dUnknownPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420012: fltTcaOspfDropUnkStats1wUnknownPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420013: fltTcaOspfDropUnkStats1moUnknownPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420014: fltTcaOspfDropUnkStats1qtrUnknownPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420015: fltTcaOspfDropUnkStats1yearUnknownPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420016: fltTcaOspfDropUnkStats5minUnknownPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420017: fltTcaOspfDropUnkStats15minUnknownPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420018: fltTcaOspfDropUnkStats1hUnknownPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420019: fltTcaOspfDropUnkStats1dUnknownPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420020: fltTcaOspfDropUnkStats1wUnknownPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420021: fltTcaOspfDropUnkStats1moUnknownPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420022: fltTcaOspfDropUnkStats1qtrUnknownPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420023: fltTcaOspfDropUnkStats1yearUnknownPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420024: fltTcaOspfDropUnkStats5minUnknownPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420025: fltTcaOspfDropUnkStats15minUnknownPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420026: fltTcaOspfDropUnkStats1hUnknownPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420027: fltTcaOspfDropUnkStats1dUnknownPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420028: fltTcaOspfDropUnkStats1wUnknownPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420029: fltTcaOspfDropUnkStats1moUnknownPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420030: fltTcaOspfDropUnkStats1qtrUnknownPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420031: fltTcaOspfDropUnkStats1yearUnknownPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420056: fltTcaOspfDropUnkStats5minUnknownPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420057: fltTcaOspfDropUnkStats15minUnknownPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420058: fltTcaOspfDropUnkStats1hUnknownPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420059: fltTcaOspfDropUnkStats1dUnknownPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420060: fltTcaOspfDropUnkStats1wUnknownPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420061: fltTcaOspfDropUnkStats1moUnknownPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420062: fltTcaOspfDropUnkStats1qtrUnknownPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420063: fltTcaOspfDropUnkStats1yearUnknownPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420064: fltTcaOspfDropUnkStats5minUnknownPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420065: fltTcaOspfDropUnkStats15minUnknownPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420066: fltTcaOspfDropUnkStats1hUnknownPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420067: fltTcaOspfDropUnkStats1dUnknownPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420068: fltTcaOspfDropUnkStats1wUnknownPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420069: fltTcaOspfDropUnkStats1moUnknownPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420070: fltTcaOspfDropUnkStats1qtrUnknownPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420071: fltTcaOspfDropUnkStats1yearUnknownPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Unknown Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Unknown Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4201: fltHinventoryRsSubnetToRouteTableResolveFail
Severity: warning
Explanation: The object refers to an object that was not found.
Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.
F420144: fltTcaOspfDupStats5minDupRtrIdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420145: fltTcaOspfDupStats15minDupRtrIdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420146: fltTcaOspfDupStats1hDupRtrIdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420147: fltTcaOspfDupStats1dDupRtrIdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420148: fltTcaOspfDupStats1wDupRtrIdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420149: fltTcaOspfDupStats1moDupRtrIdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420150: fltTcaOspfDupStats1qtrDupRtrIdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420151: fltTcaOspfDupStats1yearDupRtrIdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420160: fltTcaOspfDupStats5minDupRtrIdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420161: fltTcaOspfDupStats15minDupRtrIdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420162: fltTcaOspfDupStats1hDupRtrIdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420163: fltTcaOspfDupStats1dDupRtrIdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420164: fltTcaOspfDupStats1wDupRtrIdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420165: fltTcaOspfDupStats1moDupRtrIdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420166: fltTcaOspfDupStats1qtrDupRtrIdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420167: fltTcaOspfDupStats1yearDupRtrIdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420168: fltTcaOspfDupStats5minDupRtrIdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420169: fltTcaOspfDupStats15minDupRtrIdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420170: fltTcaOspfDupStats1hDupRtrIdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420171: fltTcaOspfDupStats1dDupRtrIdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420172: fltTcaOspfDupStats1wDupRtrIdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420173: fltTcaOspfDupStats1moDupRtrIdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420174: fltTcaOspfDupStats1qtrDupRtrIdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420175: fltTcaOspfDupStats1yearDupRtrIdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420176: fltTcaOspfDupStats5minDupRtrIdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420177: fltTcaOspfDupStats15minDupRtrIdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420178: fltTcaOspfDupStats1hDupRtrIdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420179: fltTcaOspfDupStats1dDupRtrIdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420180: fltTcaOspfDupStats1wDupRtrIdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420181: fltTcaOspfDupStats1moDupRtrIdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420182: fltTcaOspfDupStats1qtrDupRtrIdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420183: fltTcaOspfDupStats1yearDupRtrIdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420184: fltTcaOspfDupStats5minDupRtrIdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420185: fltTcaOspfDupStats15minDupRtrIdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420186: fltTcaOspfDupStats1hDupRtrIdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420187: fltTcaOspfDupStats1dDupRtrIdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420188: fltTcaOspfDupStats1wDupRtrIdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420189: fltTcaOspfDupStats1moDupRtrIdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420190: fltTcaOspfDupStats1qtrDupRtrIdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420191: fltTcaOspfDupStats1yearDupRtrIdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420192: fltTcaOspfDupStats5minDupRtrIdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420193: fltTcaOspfDupStats15minDupRtrIdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420194: fltTcaOspfDupStats1hDupRtrIdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420195: fltTcaOspfDupStats1dDupRtrIdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420196: fltTcaOspfDupStats1wDupRtrIdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420197: fltTcaOspfDupStats1moDupRtrIdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420198: fltTcaOspfDupStats1qtrDupRtrIdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420199: fltTcaOspfDupStats1yearDupRtrIdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420224: fltTcaOspfDupStats5minDupRtrIdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420225: fltTcaOspfDupStats15minDupRtrIdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420226: fltTcaOspfDupStats1hDupRtrIdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420227: fltTcaOspfDupStats1dDupRtrIdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420228: fltTcaOspfDupStats1wDupRtrIdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420229: fltTcaOspfDupStats1moDupRtrIdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420230: fltTcaOspfDupStats1qtrDupRtrIdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420231: fltTcaOspfDupStats1yearDupRtrIdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420232: fltTcaOspfDupStats5minDupRtrIdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420233: fltTcaOspfDupStats15minDupRtrIdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420234: fltTcaOspfDupStats1hDupRtrIdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420235: fltTcaOspfDupStats1dDupRtrIdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420236: fltTcaOspfDupStats1wDupRtrIdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420237: fltTcaOspfDupStats1moDupRtrIdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420238: fltTcaOspfDupStats1qtrDupRtrIdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420239: fltTcaOspfDupStats1yearDupRtrIdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate RouterId Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate RouterId Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4203: fltSvcredirRsDestAttTrackedDown
Severity: major
Explanation: This fault occurs when corresponding PBR service destination goes to failed state
- Check if hardware supports this feature
- Look at any configuration issues
- Verify the configuration is correct/complete
- Check network connectivity and ensure the service dest is up and is trackable using the protocol configured
F420312: fltTcaOspfDupStats5minDupSrcAddrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420313: fltTcaOspfDupStats15minDupSrcAddrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420314: fltTcaOspfDupStats1hDupSrcAddrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420315: fltTcaOspfDupStats1dDupSrcAddrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420316: fltTcaOspfDupStats1wDupSrcAddrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420317: fltTcaOspfDupStats1moDupSrcAddrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420318: fltTcaOspfDupStats1qtrDupSrcAddrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420319: fltTcaOspfDupStats1yearDupSrcAddrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420328: fltTcaOspfDupStats5minDupSrcAddrPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420329: fltTcaOspfDupStats15minDupSrcAddrPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420330: fltTcaOspfDupStats1hDupSrcAddrPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420331: fltTcaOspfDupStats1dDupSrcAddrPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420332: fltTcaOspfDupStats1wDupSrcAddrPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420333: fltTcaOspfDupStats1moDupSrcAddrPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420334: fltTcaOspfDupStats1qtrDupSrcAddrPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420335: fltTcaOspfDupStats1yearDupSrcAddrPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420336: fltTcaOspfDupStats5minDupSrcAddrPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420337: fltTcaOspfDupStats15minDupSrcAddrPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420338: fltTcaOspfDupStats1hDupSrcAddrPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420339: fltTcaOspfDupStats1dDupSrcAddrPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420340: fltTcaOspfDupStats1wDupSrcAddrPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420341: fltTcaOspfDupStats1moDupSrcAddrPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420342: fltTcaOspfDupStats1qtrDupSrcAddrPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420343: fltTcaOspfDupStats1yearDupSrcAddrPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420344: fltTcaOspfDupStats5minDupSrcAddrPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420345: fltTcaOspfDupStats15minDupSrcAddrPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420346: fltTcaOspfDupStats1hDupSrcAddrPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420347: fltTcaOspfDupStats1dDupSrcAddrPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420348: fltTcaOspfDupStats1wDupSrcAddrPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420349: fltTcaOspfDupStats1moDupSrcAddrPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420350: fltTcaOspfDupStats1qtrDupSrcAddrPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420351: fltTcaOspfDupStats1yearDupSrcAddrPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420352: fltTcaOspfDupStats5minDupSrcAddrPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420353: fltTcaOspfDupStats15minDupSrcAddrPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420354: fltTcaOspfDupStats1hDupSrcAddrPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420355: fltTcaOspfDupStats1dDupSrcAddrPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420356: fltTcaOspfDupStats1wDupSrcAddrPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420357: fltTcaOspfDupStats1moDupSrcAddrPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420358: fltTcaOspfDupStats1qtrDupSrcAddrPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420359: fltTcaOspfDupStats1yearDupSrcAddrPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420360: fltTcaOspfDupStats5minDupSrcAddrPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420361: fltTcaOspfDupStats15minDupSrcAddrPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420362: fltTcaOspfDupStats1hDupSrcAddrPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420363: fltTcaOspfDupStats1dDupSrcAddrPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420364: fltTcaOspfDupStats1wDupSrcAddrPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420365: fltTcaOspfDupStats1moDupSrcAddrPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420366: fltTcaOspfDupStats1qtrDupSrcAddrPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420367: fltTcaOspfDupStats1yearDupSrcAddrPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420392: fltTcaOspfDupStats5minDupSrcAddrPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420393: fltTcaOspfDupStats15minDupSrcAddrPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420394: fltTcaOspfDupStats1hDupSrcAddrPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420395: fltTcaOspfDupStats1dDupSrcAddrPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420396: fltTcaOspfDupStats1wDupSrcAddrPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420397: fltTcaOspfDupStats1moDupSrcAddrPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420398: fltTcaOspfDupStats1qtrDupSrcAddrPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420399: fltTcaOspfDupStats1yearDupSrcAddrPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4204: fltSvcredirRsDestAttRulesNotPresent
Severity: major
Explanation: This fault occurs when corresponding PBR service destination goes to failed state
- Check if hardware supports this feature
- Look at any configuration issues
- Verify the configuration is correct/complete
F420400: fltTcaOspfDupStats5minDupSrcAddrPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420401: fltTcaOspfDupStats15minDupSrcAddrPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420402: fltTcaOspfDupStats1hDupSrcAddrPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420403: fltTcaOspfDupStats1dDupSrcAddrPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420404: fltTcaOspfDupStats1wDupSrcAddrPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420405: fltTcaOspfDupStats1moDupSrcAddrPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420406: fltTcaOspfDupStats1qtrDupSrcAddrPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420407: fltTcaOspfDupStats1yearDupSrcAddrPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Duplicate Source Addr Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Duplicate Source Addr Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420480: fltTcaOspfErrPktStats5minErrDbdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420481: fltTcaOspfErrPktStats15minErrDbdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420482: fltTcaOspfErrPktStats1hErrDbdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420483: fltTcaOspfErrPktStats1dErrDbdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420484: fltTcaOspfErrPktStats1wErrDbdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420485: fltTcaOspfErrPktStats1moErrDbdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420486: fltTcaOspfErrPktStats1qtrErrDbdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420487: fltTcaOspfErrPktStats1yearErrDbdPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420496: fltTcaOspfErrPktStats5minErrDbdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420497: fltTcaOspfErrPktStats15minErrDbdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420498: fltTcaOspfErrPktStats1hErrDbdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420499: fltTcaOspfErrPktStats1dErrDbdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4205: fltSvcredirRsDestAttHwError
Severity: major
Explanation: This fault occurs when corresponding PBR service destination goes to failed state
- Check if hardware supports this feature
- Look at any configuration issues
- Verify the configuration is correct/complete
- Check network connectivity and ensure the port is up
F420500: fltTcaOspfErrPktStats1wErrDbdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420501: fltTcaOspfErrPktStats1moErrDbdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420502: fltTcaOspfErrPktStats1qtrErrDbdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420503: fltTcaOspfErrPktStats1yearErrDbdPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420504: fltTcaOspfErrPktStats5minErrDbdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420505: fltTcaOspfErrPktStats15minErrDbdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420506: fltTcaOspfErrPktStats1hErrDbdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420507: fltTcaOspfErrPktStats1dErrDbdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420508: fltTcaOspfErrPktStats1wErrDbdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420509: fltTcaOspfErrPktStats1moErrDbdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420510: fltTcaOspfErrPktStats1qtrErrDbdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420511: fltTcaOspfErrPktStats1yearErrDbdPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420512: fltTcaOspfErrPktStats5minErrDbdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420513: fltTcaOspfErrPktStats15minErrDbdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420514: fltTcaOspfErrPktStats1hErrDbdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420515: fltTcaOspfErrPktStats1dErrDbdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420516: fltTcaOspfErrPktStats1wErrDbdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420517: fltTcaOspfErrPktStats1moErrDbdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420518: fltTcaOspfErrPktStats1qtrErrDbdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420519: fltTcaOspfErrPktStats1yearErrDbdPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420520: fltTcaOspfErrPktStats5minErrDbdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420521: fltTcaOspfErrPktStats15minErrDbdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420522: fltTcaOspfErrPktStats1hErrDbdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420523: fltTcaOspfErrPktStats1dErrDbdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420524: fltTcaOspfErrPktStats1wErrDbdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420525: fltTcaOspfErrPktStats1moErrDbdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420526: fltTcaOspfErrPktStats1qtrErrDbdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420527: fltTcaOspfErrPktStats1yearErrDbdPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420528: fltTcaOspfErrPktStats5minErrDbdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420529: fltTcaOspfErrPktStats15minErrDbdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420530: fltTcaOspfErrPktStats1hErrDbdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420531: fltTcaOspfErrPktStats1dErrDbdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420532: fltTcaOspfErrPktStats1wErrDbdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420533: fltTcaOspfErrPktStats1moErrDbdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420534: fltTcaOspfErrPktStats1qtrErrDbdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420535: fltTcaOspfErrPktStats1yearErrDbdPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420560: fltTcaOspfErrPktStats5minErrDbdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420561: fltTcaOspfErrPktStats15minErrDbdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420562: fltTcaOspfErrPktStats1hErrDbdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420563: fltTcaOspfErrPktStats1dErrDbdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420564: fltTcaOspfErrPktStats1wErrDbdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420565: fltTcaOspfErrPktStats1moErrDbdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420566: fltTcaOspfErrPktStats1qtrErrDbdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420567: fltTcaOspfErrPktStats1yearErrDbdPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420568: fltTcaOspfErrPktStats5minErrDbdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420569: fltTcaOspfErrPktStats15minErrDbdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420570: fltTcaOspfErrPktStats1hErrDbdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420571: fltTcaOspfErrPktStats1dErrDbdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420572: fltTcaOspfErrPktStats1wErrDbdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420573: fltTcaOspfErrPktStats1moErrDbdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420574: fltTcaOspfErrPktStats1qtrErrDbdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420575: fltTcaOspfErrPktStats1yearErrDbdPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error DBD Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error DBD Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4206: fltSvcredirRsBackupDestAttTrackedDown
Severity: major
Explanation: This fault occurs when corresponding PBR service backup destination goes to failed state
- Check if hardware supports this feature
- Look at any configuration issues
- Verify the configuration is correct/complete
- Check network connectivity and ensure the service dest is up and is trackable using the protocol configured
F420648: fltTcaOspfErrPktStats5minErrHelloPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420649: fltTcaOspfErrPktStats15minErrHelloPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420650: fltTcaOspfErrPktStats1hErrHelloPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420651: fltTcaOspfErrPktStats1dErrHelloPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420652: fltTcaOspfErrPktStats1wErrHelloPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420653: fltTcaOspfErrPktStats1moErrHelloPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420654: fltTcaOspfErrPktStats1qtrErrHelloPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420655: fltTcaOspfErrPktStats1yearErrHelloPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420664: fltTcaOspfErrPktStats5minErrHelloPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420665: fltTcaOspfErrPktStats15minErrHelloPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420666: fltTcaOspfErrPktStats1hErrHelloPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420667: fltTcaOspfErrPktStats1dErrHelloPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420668: fltTcaOspfErrPktStats1wErrHelloPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420669: fltTcaOspfErrPktStats1moErrHelloPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420670: fltTcaOspfErrPktStats1qtrErrHelloPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420671: fltTcaOspfErrPktStats1yearErrHelloPktsRcvdCum
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received cumulative" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420672: fltTcaOspfErrPktStats5minErrHelloPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420673: fltTcaOspfErrPktStats15minErrHelloPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420674: fltTcaOspfErrPktStats1hErrHelloPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420675: fltTcaOspfErrPktStats1dErrHelloPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420676: fltTcaOspfErrPktStats1wErrHelloPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420677: fltTcaOspfErrPktStats1moErrHelloPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420678: fltTcaOspfErrPktStats1qtrErrHelloPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420679: fltTcaOspfErrPktStats1yearErrHelloPktsRcvdPer
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received periodic" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420680: fltTcaOspfErrPktStats5minErrHelloPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420681: fltTcaOspfErrPktStats15minErrHelloPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420682: fltTcaOspfErrPktStats1hErrHelloPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420683: fltTcaOspfErrPktStats1dErrHelloPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420684: fltTcaOspfErrPktStats1wErrHelloPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420685: fltTcaOspfErrPktStats1moErrHelloPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420686: fltTcaOspfErrPktStats1qtrErrHelloPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420687: fltTcaOspfErrPktStats1yearErrHelloPktsRcvdMin
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received minimum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420688: fltTcaOspfErrPktStats5minErrHelloPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420689: fltTcaOspfErrPktStats15minErrHelloPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420690: fltTcaOspfErrPktStats1hErrHelloPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420691: fltTcaOspfErrPktStats1dErrHelloPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420692: fltTcaOspfErrPktStats1wErrHelloPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420693: fltTcaOspfErrPktStats1moErrHelloPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420694: fltTcaOspfErrPktStats1qtrErrHelloPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420695: fltTcaOspfErrPktStats1yearErrHelloPktsRcvdMax
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received maximum value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420696: fltTcaOspfErrPktStats5minErrHelloPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420697: fltTcaOspfErrPktStats15minErrHelloPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420698: fltTcaOspfErrPktStats1hErrHelloPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420699: fltTcaOspfErrPktStats1dErrHelloPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4207: fltSvcredirRsBackupDestAttRulesNotPresent
Severity: major
Explanation: This fault occurs when corresponding PBR service backup destination goes to failed state
- Check if hardware supports this feature
- Look at any configuration issues
- Verify the configuration is correct/complete
F420700: fltTcaOspfErrPktStats1wErrHelloPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420701: fltTcaOspfErrPktStats1moErrHelloPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420702: fltTcaOspfErrPktStats1qtrErrHelloPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420703: fltTcaOspfErrPktStats1yearErrHelloPktsRcvdAvg
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received average value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420728: fltTcaOspfErrPktStats5minErrHelloPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420729: fltTcaOspfErrPktStats15minErrHelloPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420730: fltTcaOspfErrPktStats1hErrHelloPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420731: fltTcaOspfErrPktStats1dErrHelloPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420732: fltTcaOspfErrPktStats1wErrHelloPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420733: fltTcaOspfErrPktStats1moErrHelloPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420734: fltTcaOspfErrPktStats1qtrErrHelloPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420735: fltTcaOspfErrPktStats1yearErrHelloPktsRcvdTr
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received trend" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420736: fltTcaOspfErrPktStats5minErrHelloPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420737: fltTcaOspfErrPktStats15minErrHelloPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420738: fltTcaOspfErrPktStats1hErrHelloPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420739: fltTcaOspfErrPktStats1dErrHelloPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420740: fltTcaOspfErrPktStats1wErrHelloPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420741: fltTcaOspfErrPktStats1moErrHelloPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420742: fltTcaOspfErrPktStats1qtrErrHelloPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420743: fltTcaOspfErrPktStats1yearErrHelloPktsRcvdRate
Severity: variable
Explanation: This fault is caused by "Error Hello Packets Received rate" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Hello Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F4208: fltSvcredirRsBackupDestAttHwErrorDest
Severity: major
Explanation: This fault occurs when corresponding PBR service backup destination goes to failed state
- Check if hardware supports this feature
- Look at any configuration issues
- Verify the configuration is correct/complete
- Check network connectivity and ensure the port is up
F420816: fltTcaOspfErrPktStats5minErrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420817: fltTcaOspfErrPktStats15minErrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420818: fltTcaOspfErrPktStats1hErrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Packets Received current value" statistical property crossing threshold level.
Recommended Action: Check the values of "Error Packets Received" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.
F420819: fltTcaOspfErrPktStats1dErrPktsRcvdLast
Severity: variable
Explanation: This fault is caused by "Error Packe