F2000: fltPlannerRsAzureDomainLabelResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2001: fltPlannerRsVmwareDomainTmplResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2002: fltPlannerRsVmwareDomainLabelResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F200304: fltTcaEqptcapacityVlanXlateEntries5minNormalizedLast

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200305: fltTcaEqptcapacityVlanXlateEntries15minNormalizedLast

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200306: fltTcaEqptcapacityVlanXlateEntries1hNormalizedLast

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200307: fltTcaEqptcapacityVlanXlateEntries1dNormalizedLast

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200308: fltTcaEqptcapacityVlanXlateEntries1wNormalizedLast

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200309: fltTcaEqptcapacityVlanXlateEntries1moNormalizedLast

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200310: fltTcaEqptcapacityVlanXlateEntries1qtrNormalizedLast

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200311: fltTcaEqptcapacityVlanXlateEntries1yearNormalizedLast

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200312: fltTcaEqptcapacityVlanXlateEntries5minNormalizedMin

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200313: fltTcaEqptcapacityVlanXlateEntries15minNormalizedMin

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200314: fltTcaEqptcapacityVlanXlateEntries1hNormalizedMin

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200315: fltTcaEqptcapacityVlanXlateEntries1dNormalizedMin

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200316: fltTcaEqptcapacityVlanXlateEntries1wNormalizedMin

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200317: fltTcaEqptcapacityVlanXlateEntries1moNormalizedMin

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200318: fltTcaEqptcapacityVlanXlateEntries1qtrNormalizedMin

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200319: fltTcaEqptcapacityVlanXlateEntries1yearNormalizedMin

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200320: fltTcaEqptcapacityVlanXlateEntries5minNormalizedMax

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200321: fltTcaEqptcapacityVlanXlateEntries15minNormalizedMax

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200322: fltTcaEqptcapacityVlanXlateEntries1hNormalizedMax

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200323: fltTcaEqptcapacityVlanXlateEntries1dNormalizedMax

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200324: fltTcaEqptcapacityVlanXlateEntries1wNormalizedMax

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200325: fltTcaEqptcapacityVlanXlateEntries1moNormalizedMax

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200326: fltTcaEqptcapacityVlanXlateEntries1qtrNormalizedMax

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200327: fltTcaEqptcapacityVlanXlateEntries1yearNormalizedMax

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200328: fltTcaEqptcapacityVlanXlateEntries5minNormalizedAvg

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage average value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200329: fltTcaEqptcapacityVlanXlateEntries15minNormalizedAvg

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage average value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200330: fltTcaEqptcapacityVlanXlateEntries1hNormalizedAvg

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage average value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200331: fltTcaEqptcapacityVlanXlateEntries1dNormalizedAvg

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage average value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200332: fltTcaEqptcapacityVlanXlateEntries1wNormalizedAvg

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage average value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200333: fltTcaEqptcapacityVlanXlateEntries1moNormalizedAvg

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage average value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200334: fltTcaEqptcapacityVlanXlateEntries1qtrNormalizedAvg

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage average value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200335: fltTcaEqptcapacityVlanXlateEntries1yearNormalizedAvg

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage average value" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200368: fltTcaEqptcapacityVlanXlateEntries5minNormalizedTr

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage trend" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200369: fltTcaEqptcapacityVlanXlateEntries15minNormalizedTr

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage trend" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200370: fltTcaEqptcapacityVlanXlateEntries1hNormalizedTr

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage trend" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200371: fltTcaEqptcapacityVlanXlateEntries1dNormalizedTr

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage trend" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200372: fltTcaEqptcapacityVlanXlateEntries1wNormalizedTr

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage trend" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200373: fltTcaEqptcapacityVlanXlateEntries1moNormalizedTr

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage trend" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200374: fltTcaEqptcapacityVlanXlateEntries1qtrNormalizedTr

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage trend" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F200375: fltTcaEqptcapacityVlanXlateEntries1yearNormalizedTr

Severity: variable

Explanation: This fault is caused by "Vlan Xlate Entries Usage trend" statistical property crossing threshold level.

Recommended Action: Check the values of "Vlan Xlate Entries Usage" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F2008: fltDppClassOperStFailed

Severity: major

Explanation: This fault occurs when DPP manager fails to activate a class due to hardware programming failure

F2009: fltInfraRsQosDppIfPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2011: fltVmmRsVswitchOverrideCdpIfPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2012: fltVmmRsVswitchOverrideFwPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2013: fltVmmRsVswitchOverrideLacpPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2014: fltVmmRsVswitchOverrideLldpIfPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2015: fltVmmRsVswitchOverrideMcpIfPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2016: fltVmmRsVswitchOverrideStpPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2031: fltDbgacRsContextResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2041: fltInfraRsQosEgressDppIfPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2042: fltInfraRsQosIngressDppIfPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2043: fltL3extRsEgressQosDppPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2044: fltL3extRsIngressQosDppPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2060: fltVnsRsAbsCopyConnectionResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F206120: fltTcaL2EgrBytes5minMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206121: fltTcaL2EgrBytes15minMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206122: fltTcaL2EgrBytes1hMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206123: fltTcaL2EgrBytes1dMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206124: fltTcaL2EgrBytes1wMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206125: fltTcaL2EgrBytes1moMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206126: fltTcaL2EgrBytes1qtrMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206127: fltTcaL2EgrBytes1yearMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206136: fltTcaL2EgrBytes5minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206137: fltTcaL2EgrBytes15minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206138: fltTcaL2EgrBytes1hMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206139: fltTcaL2EgrBytes1dMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206140: fltTcaL2EgrBytes1wMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206141: fltTcaL2EgrBytes1moMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206142: fltTcaL2EgrBytes1qtrMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206143: fltTcaL2EgrBytes1yearMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206144: fltTcaL2EgrBytes5minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206145: fltTcaL2EgrBytes15minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206146: fltTcaL2EgrBytes1hMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206147: fltTcaL2EgrBytes1dMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206148: fltTcaL2EgrBytes1wMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206149: fltTcaL2EgrBytes1moMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206150: fltTcaL2EgrBytes1qtrMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206151: fltTcaL2EgrBytes1yearMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206152: fltTcaL2EgrBytes5minMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206153: fltTcaL2EgrBytes15minMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206154: fltTcaL2EgrBytes1hMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206155: fltTcaL2EgrBytes1dMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206156: fltTcaL2EgrBytes1wMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206157: fltTcaL2EgrBytes1moMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206158: fltTcaL2EgrBytes1qtrMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206159: fltTcaL2EgrBytes1yearMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206160: fltTcaL2EgrBytes5minMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206161: fltTcaL2EgrBytes15minMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206162: fltTcaL2EgrBytes1hMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206163: fltTcaL2EgrBytes1dMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206164: fltTcaL2EgrBytes1wMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206165: fltTcaL2EgrBytes1moMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206166: fltTcaL2EgrBytes1qtrMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206167: fltTcaL2EgrBytes1yearMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206168: fltTcaL2EgrBytes5minMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206169: fltTcaL2EgrBytes15minMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206170: fltTcaL2EgrBytes1hMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206171: fltTcaL2EgrBytes1dMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206172: fltTcaL2EgrBytes1wMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206173: fltTcaL2EgrBytes1moMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206174: fltTcaL2EgrBytes1qtrMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206175: fltTcaL2EgrBytes1yearMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206200: fltTcaL2EgrBytes5minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206201: fltTcaL2EgrBytes15minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206202: fltTcaL2EgrBytes1hMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206203: fltTcaL2EgrBytes1dMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206204: fltTcaL2EgrBytes1wMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206205: fltTcaL2EgrBytes1moMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206206: fltTcaL2EgrBytes1qtrMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206207: fltTcaL2EgrBytes1yearMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206208: fltTcaL2EgrBytes5minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206209: fltTcaL2EgrBytes15minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206210: fltTcaL2EgrBytes1hMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206211: fltTcaL2EgrBytes1dMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206212: fltTcaL2EgrBytes1wMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206213: fltTcaL2EgrBytes1moMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206214: fltTcaL2EgrBytes1qtrMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206215: fltTcaL2EgrBytes1yearMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206288: fltTcaL2EgrBytesPart5minMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206289: fltTcaL2EgrBytesPart15minMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206290: fltTcaL2EgrBytesPart1hMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206291: fltTcaL2EgrBytesPart1dMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206292: fltTcaL2EgrBytesPart1wMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206293: fltTcaL2EgrBytesPart1moMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206294: fltTcaL2EgrBytesPart1qtrMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206295: fltTcaL2EgrBytesPart1yearMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206304: fltTcaL2EgrBytesPart5minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206305: fltTcaL2EgrBytesPart15minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206306: fltTcaL2EgrBytesPart1hMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206307: fltTcaL2EgrBytesPart1dMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206308: fltTcaL2EgrBytesPart1wMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206309: fltTcaL2EgrBytesPart1moMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206310: fltTcaL2EgrBytesPart1qtrMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206311: fltTcaL2EgrBytesPart1yearMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206312: fltTcaL2EgrBytesPart5minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206313: fltTcaL2EgrBytesPart15minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206314: fltTcaL2EgrBytesPart1hMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206315: fltTcaL2EgrBytesPart1dMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206316: fltTcaL2EgrBytesPart1wMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206317: fltTcaL2EgrBytesPart1moMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206318: fltTcaL2EgrBytesPart1qtrMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206319: fltTcaL2EgrBytesPart1yearMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206320: fltTcaL2EgrBytesPart5minMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206321: fltTcaL2EgrBytesPart15minMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206322: fltTcaL2EgrBytesPart1hMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206323: fltTcaL2EgrBytesPart1dMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206324: fltTcaL2EgrBytesPart1wMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206325: fltTcaL2EgrBytesPart1moMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206326: fltTcaL2EgrBytesPart1qtrMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206327: fltTcaL2EgrBytesPart1yearMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206328: fltTcaL2EgrBytesPart5minMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206329: fltTcaL2EgrBytesPart15minMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206330: fltTcaL2EgrBytesPart1hMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206331: fltTcaL2EgrBytesPart1dMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206332: fltTcaL2EgrBytesPart1wMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206333: fltTcaL2EgrBytesPart1moMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206334: fltTcaL2EgrBytesPart1qtrMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206335: fltTcaL2EgrBytesPart1yearMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206336: fltTcaL2EgrBytesPart5minMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206337: fltTcaL2EgrBytesPart15minMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206338: fltTcaL2EgrBytesPart1hMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206339: fltTcaL2EgrBytesPart1dMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206340: fltTcaL2EgrBytesPart1wMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206341: fltTcaL2EgrBytesPart1moMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206342: fltTcaL2EgrBytesPart1qtrMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206343: fltTcaL2EgrBytesPart1yearMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206368: fltTcaL2EgrBytesPart5minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206369: fltTcaL2EgrBytesPart15minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206370: fltTcaL2EgrBytesPart1hMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206371: fltTcaL2EgrBytesPart1dMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206372: fltTcaL2EgrBytesPart1wMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206373: fltTcaL2EgrBytesPart1moMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206374: fltTcaL2EgrBytesPart1qtrMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206375: fltTcaL2EgrBytesPart1yearMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206376: fltTcaL2EgrBytesPart5minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206377: fltTcaL2EgrBytesPart15minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206378: fltTcaL2EgrBytesPart1hMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206379: fltTcaL2EgrBytesPart1dMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206380: fltTcaL2EgrBytesPart1wMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206381: fltTcaL2EgrBytesPart1moMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206382: fltTcaL2EgrBytesPart1qtrMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206383: fltTcaL2EgrBytesPart1yearMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206456: fltTcaL2EgrBytesAg5minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206457: fltTcaL2EgrBytesAg15minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206458: fltTcaL2EgrBytesAg1hMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206459: fltTcaL2EgrBytesAg1dMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206460: fltTcaL2EgrBytesAg1wMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206461: fltTcaL2EgrBytesAg1moMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206462: fltTcaL2EgrBytesAg1qtrMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206463: fltTcaL2EgrBytesAg1yearMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206464: fltTcaL2EgrBytesAg5minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206465: fltTcaL2EgrBytesAg15minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206466: fltTcaL2EgrBytesAg1hMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206467: fltTcaL2EgrBytesAg1dMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206468: fltTcaL2EgrBytesAg1wMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206469: fltTcaL2EgrBytesAg1moMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206470: fltTcaL2EgrBytesAg1qtrMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206471: fltTcaL2EgrBytesAg1yearMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206496: fltTcaL2EgrBytesAg5minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206497: fltTcaL2EgrBytesAg15minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206498: fltTcaL2EgrBytesAg1hMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206499: fltTcaL2EgrBytesAg1dMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F2065: fltVnsRsLDevDomPResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F206500: fltTcaL2EgrBytesAg1wMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206501: fltTcaL2EgrBytesAg1moMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206502: fltTcaL2EgrBytesAg1qtrMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206503: fltTcaL2EgrBytesAg1yearMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206504: fltTcaL2EgrBytesAg5minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206505: fltTcaL2EgrBytesAg15minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206506: fltTcaL2EgrBytesAg1hMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206507: fltTcaL2EgrBytesAg1dMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206508: fltTcaL2EgrBytesAg1wMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206509: fltTcaL2EgrBytesAg1moMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206510: fltTcaL2EgrBytesAg1qtrMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206511: fltTcaL2EgrBytesAg1yearMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206560: fltTcaL2EgrBytes5minUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206561: fltTcaL2EgrBytes15minUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206562: fltTcaL2EgrBytes1hUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206563: fltTcaL2EgrBytes1dUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206564: fltTcaL2EgrBytes1wUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206565: fltTcaL2EgrBytes1moUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206566: fltTcaL2EgrBytes1qtrUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206567: fltTcaL2EgrBytes1yearUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206576: fltTcaL2EgrBytes5minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206577: fltTcaL2EgrBytes15minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206578: fltTcaL2EgrBytes1hUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206579: fltTcaL2EgrBytes1dUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206580: fltTcaL2EgrBytes1wUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206581: fltTcaL2EgrBytes1moUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206582: fltTcaL2EgrBytes1qtrUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206583: fltTcaL2EgrBytes1yearUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206584: fltTcaL2EgrBytes5minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206585: fltTcaL2EgrBytes15minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206586: fltTcaL2EgrBytes1hUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206587: fltTcaL2EgrBytes1dUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206588: fltTcaL2EgrBytes1wUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206589: fltTcaL2EgrBytes1moUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206590: fltTcaL2EgrBytes1qtrUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206591: fltTcaL2EgrBytes1yearUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206592: fltTcaL2EgrBytes5minUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206593: fltTcaL2EgrBytes15minUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206594: fltTcaL2EgrBytes1hUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206595: fltTcaL2EgrBytes1dUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206596: fltTcaL2EgrBytes1wUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206597: fltTcaL2EgrBytes1moUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206598: fltTcaL2EgrBytes1qtrUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206599: fltTcaL2EgrBytes1yearUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206600: fltTcaL2EgrBytes5minUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206601: fltTcaL2EgrBytes15minUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206602: fltTcaL2EgrBytes1hUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206603: fltTcaL2EgrBytes1dUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206604: fltTcaL2EgrBytes1wUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206605: fltTcaL2EgrBytes1moUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206606: fltTcaL2EgrBytes1qtrUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206607: fltTcaL2EgrBytes1yearUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206608: fltTcaL2EgrBytes5minUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206609: fltTcaL2EgrBytes15minUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206610: fltTcaL2EgrBytes1hUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206611: fltTcaL2EgrBytes1dUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206612: fltTcaL2EgrBytes1wUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206613: fltTcaL2EgrBytes1moUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206614: fltTcaL2EgrBytes1qtrUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206615: fltTcaL2EgrBytes1yearUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206640: fltTcaL2EgrBytes5minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206641: fltTcaL2EgrBytes15minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206642: fltTcaL2EgrBytes1hUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206643: fltTcaL2EgrBytes1dUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206644: fltTcaL2EgrBytes1wUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206645: fltTcaL2EgrBytes1moUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206646: fltTcaL2EgrBytes1qtrUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206647: fltTcaL2EgrBytes1yearUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206648: fltTcaL2EgrBytes5minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206649: fltTcaL2EgrBytes15minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206650: fltTcaL2EgrBytes1hUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206651: fltTcaL2EgrBytes1dUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206652: fltTcaL2EgrBytes1wUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206653: fltTcaL2EgrBytes1moUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206654: fltTcaL2EgrBytes1qtrUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206655: fltTcaL2EgrBytes1yearUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F2067: fltDbgacRsAcExtPolToContextResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F206728: fltTcaL2EgrBytesPart5minUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206729: fltTcaL2EgrBytesPart15minUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206730: fltTcaL2EgrBytesPart1hUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206731: fltTcaL2EgrBytesPart1dUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206732: fltTcaL2EgrBytesPart1wUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206733: fltTcaL2EgrBytesPart1moUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206734: fltTcaL2EgrBytesPart1qtrUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206735: fltTcaL2EgrBytesPart1yearUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206744: fltTcaL2EgrBytesPart5minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206745: fltTcaL2EgrBytesPart15minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206746: fltTcaL2EgrBytesPart1hUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206747: fltTcaL2EgrBytesPart1dUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206748: fltTcaL2EgrBytesPart1wUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206749: fltTcaL2EgrBytesPart1moUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206750: fltTcaL2EgrBytesPart1qtrUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206751: fltTcaL2EgrBytesPart1yearUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206752: fltTcaL2EgrBytesPart5minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206753: fltTcaL2EgrBytesPart15minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206754: fltTcaL2EgrBytesPart1hUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206755: fltTcaL2EgrBytesPart1dUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206756: fltTcaL2EgrBytesPart1wUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206757: fltTcaL2EgrBytesPart1moUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206758: fltTcaL2EgrBytesPart1qtrUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206759: fltTcaL2EgrBytesPart1yearUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206760: fltTcaL2EgrBytesPart5minUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206761: fltTcaL2EgrBytesPart15minUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206762: fltTcaL2EgrBytesPart1hUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206763: fltTcaL2EgrBytesPart1dUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206764: fltTcaL2EgrBytesPart1wUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206765: fltTcaL2EgrBytesPart1moUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206766: fltTcaL2EgrBytesPart1qtrUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206767: fltTcaL2EgrBytesPart1yearUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast bytes minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206768: fltTcaL2EgrBytesPart5minUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206769: fltTcaL2EgrBytesPart15minUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206770: fltTcaL2EgrBytesPart1hUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206771: fltTcaL2EgrBytesPart1dUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206772: fltTcaL2EgrBytesPart1wUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206773: fltTcaL2EgrBytesPart1moUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206774: fltTcaL2EgrBytesPart1qtrUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206775: fltTcaL2EgrBytesPart1yearUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast bytes maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206776: fltTcaL2EgrBytesPart5minUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206777: fltTcaL2EgrBytesPart15minUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206778: fltTcaL2EgrBytesPart1hUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206779: fltTcaL2EgrBytesPart1dUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206780: fltTcaL2EgrBytesPart1wUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206781: fltTcaL2EgrBytesPart1moUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206782: fltTcaL2EgrBytesPart1qtrUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206783: fltTcaL2EgrBytesPart1yearUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast bytes average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206808: fltTcaL2EgrBytesPart5minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206809: fltTcaL2EgrBytesPart15minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206810: fltTcaL2EgrBytesPart1hUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206811: fltTcaL2EgrBytesPart1dUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206812: fltTcaL2EgrBytesPart1wUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206813: fltTcaL2EgrBytesPart1moUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206814: fltTcaL2EgrBytesPart1qtrUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206815: fltTcaL2EgrBytesPart1yearUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206816: fltTcaL2EgrBytesPart5minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206817: fltTcaL2EgrBytesPart15minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206818: fltTcaL2EgrBytesPart1hUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206819: fltTcaL2EgrBytesPart1dUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206820: fltTcaL2EgrBytesPart1wUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206821: fltTcaL2EgrBytesPart1moUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206822: fltTcaL2EgrBytesPart1qtrUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206823: fltTcaL2EgrBytesPart1yearUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206896: fltTcaL2EgrBytesAg5minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206897: fltTcaL2EgrBytesAg15minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206898: fltTcaL2EgrBytesAg1hUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206899: fltTcaL2EgrBytesAg1dUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F2069: fltL3extLNodePNodePathMisconfigured

Severity: minor

Explanation: This fault occurs when under a given l3extLNodeP either one of following conditions is present: - there is a node deployment configuration but there is no path deployment configuration for that node; - there is a path deployment configuration but there is no node deployment configuration for the node where path is.

F206900: fltTcaL2EgrBytesAg1wUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206901: fltTcaL2EgrBytesAg1moUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206902: fltTcaL2EgrBytesAg1qtrUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206903: fltTcaL2EgrBytesAg1yearUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206904: fltTcaL2EgrBytesAg5minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206905: fltTcaL2EgrBytesAg15minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206906: fltTcaL2EgrBytesAg1hUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206907: fltTcaL2EgrBytesAg1dUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206908: fltTcaL2EgrBytesAg1wUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206909: fltTcaL2EgrBytesAg1moUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206910: fltTcaL2EgrBytesAg1qtrUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206911: fltTcaL2EgrBytesAg1yearUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206936: fltTcaL2EgrBytesAg5minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206937: fltTcaL2EgrBytesAg15minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206938: fltTcaL2EgrBytesAg1hUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206939: fltTcaL2EgrBytesAg1dUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206940: fltTcaL2EgrBytesAg1wUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206941: fltTcaL2EgrBytesAg1moUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206942: fltTcaL2EgrBytesAg1qtrUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206943: fltTcaL2EgrBytesAg1yearUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast bytes trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206944: fltTcaL2EgrBytesAg5minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206945: fltTcaL2EgrBytesAg15minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206946: fltTcaL2EgrBytesAg1hUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206947: fltTcaL2EgrBytesAg1dUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206948: fltTcaL2EgrBytesAg1wUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206949: fltTcaL2EgrBytesAg1moUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206950: fltTcaL2EgrBytesAg1qtrUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F206951: fltTcaL2EgrBytesAg1yearUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast bytes rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207000: fltTcaL2EgrPkts5minMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207001: fltTcaL2EgrPkts15minMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207002: fltTcaL2EgrPkts1hMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207003: fltTcaL2EgrPkts1dMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207004: fltTcaL2EgrPkts1wMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207005: fltTcaL2EgrPkts1moMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207006: fltTcaL2EgrPkts1qtrMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207007: fltTcaL2EgrPkts1yearMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207016: fltTcaL2EgrPkts5minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207017: fltTcaL2EgrPkts15minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207018: fltTcaL2EgrPkts1hMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207019: fltTcaL2EgrPkts1dMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207020: fltTcaL2EgrPkts1wMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207021: fltTcaL2EgrPkts1moMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207022: fltTcaL2EgrPkts1qtrMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207023: fltTcaL2EgrPkts1yearMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207024: fltTcaL2EgrPkts5minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207025: fltTcaL2EgrPkts15minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207026: fltTcaL2EgrPkts1hMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207027: fltTcaL2EgrPkts1dMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207028: fltTcaL2EgrPkts1wMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207029: fltTcaL2EgrPkts1moMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207030: fltTcaL2EgrPkts1qtrMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207031: fltTcaL2EgrPkts1yearMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207032: fltTcaL2EgrPkts5minMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207033: fltTcaL2EgrPkts15minMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207034: fltTcaL2EgrPkts1hMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207035: fltTcaL2EgrPkts1dMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207036: fltTcaL2EgrPkts1wMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207037: fltTcaL2EgrPkts1moMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207038: fltTcaL2EgrPkts1qtrMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207039: fltTcaL2EgrPkts1yearMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207040: fltTcaL2EgrPkts5minMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207041: fltTcaL2EgrPkts15minMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207042: fltTcaL2EgrPkts1hMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207043: fltTcaL2EgrPkts1dMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207044: fltTcaL2EgrPkts1wMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207045: fltTcaL2EgrPkts1moMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207046: fltTcaL2EgrPkts1qtrMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207047: fltTcaL2EgrPkts1yearMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207048: fltTcaL2EgrPkts5minMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207049: fltTcaL2EgrPkts15minMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207050: fltTcaL2EgrPkts1hMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207051: fltTcaL2EgrPkts1dMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207052: fltTcaL2EgrPkts1wMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207053: fltTcaL2EgrPkts1moMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207054: fltTcaL2EgrPkts1qtrMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207055: fltTcaL2EgrPkts1yearMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207080: fltTcaL2EgrPkts5minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207081: fltTcaL2EgrPkts15minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207082: fltTcaL2EgrPkts1hMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207083: fltTcaL2EgrPkts1dMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207084: fltTcaL2EgrPkts1wMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207085: fltTcaL2EgrPkts1moMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207086: fltTcaL2EgrPkts1qtrMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207087: fltTcaL2EgrPkts1yearMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207088: fltTcaL2EgrPkts5minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207089: fltTcaL2EgrPkts15minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207090: fltTcaL2EgrPkts1hMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207091: fltTcaL2EgrPkts1dMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207092: fltTcaL2EgrPkts1wMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207093: fltTcaL2EgrPkts1moMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207094: fltTcaL2EgrPkts1qtrMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207095: fltTcaL2EgrPkts1yearMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207168: fltTcaL2EgrPktsPart5minMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207169: fltTcaL2EgrPktsPart15minMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207170: fltTcaL2EgrPktsPart1hMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207171: fltTcaL2EgrPktsPart1dMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207172: fltTcaL2EgrPktsPart1wMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207173: fltTcaL2EgrPktsPart1moMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207174: fltTcaL2EgrPktsPart1qtrMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207175: fltTcaL2EgrPktsPart1yearMulticastLast

Severity: variable

Explanation: This fault is caused by "egress multicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207184: fltTcaL2EgrPktsPart5minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207185: fltTcaL2EgrPktsPart15minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207186: fltTcaL2EgrPktsPart1hMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207187: fltTcaL2EgrPktsPart1dMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207188: fltTcaL2EgrPktsPart1wMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207189: fltTcaL2EgrPktsPart1moMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207190: fltTcaL2EgrPktsPart1qtrMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207191: fltTcaL2EgrPktsPart1yearMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207192: fltTcaL2EgrPktsPart5minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207193: fltTcaL2EgrPktsPart15minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207194: fltTcaL2EgrPktsPart1hMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207195: fltTcaL2EgrPktsPart1dMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207196: fltTcaL2EgrPktsPart1wMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207197: fltTcaL2EgrPktsPart1moMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207198: fltTcaL2EgrPktsPart1qtrMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207199: fltTcaL2EgrPktsPart1yearMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207200: fltTcaL2EgrPktsPart5minMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207201: fltTcaL2EgrPktsPart15minMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207202: fltTcaL2EgrPktsPart1hMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207203: fltTcaL2EgrPktsPart1dMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207204: fltTcaL2EgrPktsPart1wMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207205: fltTcaL2EgrPktsPart1moMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207206: fltTcaL2EgrPktsPart1qtrMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207207: fltTcaL2EgrPktsPart1yearMulticastMin

Severity: variable

Explanation: This fault is caused by "egress multicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207208: fltTcaL2EgrPktsPart5minMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207209: fltTcaL2EgrPktsPart15minMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207210: fltTcaL2EgrPktsPart1hMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207211: fltTcaL2EgrPktsPart1dMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207212: fltTcaL2EgrPktsPart1wMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207213: fltTcaL2EgrPktsPart1moMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207214: fltTcaL2EgrPktsPart1qtrMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207215: fltTcaL2EgrPktsPart1yearMulticastMax

Severity: variable

Explanation: This fault is caused by "egress multicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207216: fltTcaL2EgrPktsPart5minMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207217: fltTcaL2EgrPktsPart15minMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207218: fltTcaL2EgrPktsPart1hMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207219: fltTcaL2EgrPktsPart1dMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207220: fltTcaL2EgrPktsPart1wMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207221: fltTcaL2EgrPktsPart1moMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207222: fltTcaL2EgrPktsPart1qtrMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207223: fltTcaL2EgrPktsPart1yearMulticastAvg

Severity: variable

Explanation: This fault is caused by "egress multicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207248: fltTcaL2EgrPktsPart5minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207249: fltTcaL2EgrPktsPart15minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207250: fltTcaL2EgrPktsPart1hMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207251: fltTcaL2EgrPktsPart1dMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207252: fltTcaL2EgrPktsPart1wMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207253: fltTcaL2EgrPktsPart1moMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207254: fltTcaL2EgrPktsPart1qtrMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207255: fltTcaL2EgrPktsPart1yearMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207256: fltTcaL2EgrPktsPart5minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207257: fltTcaL2EgrPktsPart15minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207258: fltTcaL2EgrPktsPart1hMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207259: fltTcaL2EgrPktsPart1dMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207260: fltTcaL2EgrPktsPart1wMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207261: fltTcaL2EgrPktsPart1moMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207262: fltTcaL2EgrPktsPart1qtrMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207263: fltTcaL2EgrPktsPart1yearMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207336: fltTcaL2EgrPktsAg5minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207337: fltTcaL2EgrPktsAg15minMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207338: fltTcaL2EgrPktsAg1hMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207339: fltTcaL2EgrPktsAg1dMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207340: fltTcaL2EgrPktsAg1wMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207341: fltTcaL2EgrPktsAg1moMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207342: fltTcaL2EgrPktsAg1qtrMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207343: fltTcaL2EgrPktsAg1yearMulticastCum

Severity: variable

Explanation: This fault is caused by "egress multicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207344: fltTcaL2EgrPktsAg5minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207345: fltTcaL2EgrPktsAg15minMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207346: fltTcaL2EgrPktsAg1hMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207347: fltTcaL2EgrPktsAg1dMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207348: fltTcaL2EgrPktsAg1wMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207349: fltTcaL2EgrPktsAg1moMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207350: fltTcaL2EgrPktsAg1qtrMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207351: fltTcaL2EgrPktsAg1yearMulticastPer

Severity: variable

Explanation: This fault is caused by "egress multicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207376: fltTcaL2EgrPktsAg5minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207377: fltTcaL2EgrPktsAg15minMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207378: fltTcaL2EgrPktsAg1hMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207379: fltTcaL2EgrPktsAg1dMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207380: fltTcaL2EgrPktsAg1wMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207381: fltTcaL2EgrPktsAg1moMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207382: fltTcaL2EgrPktsAg1qtrMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207383: fltTcaL2EgrPktsAg1yearMulticastTr

Severity: variable

Explanation: This fault is caused by "egress multicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207384: fltTcaL2EgrPktsAg5minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207385: fltTcaL2EgrPktsAg15minMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207386: fltTcaL2EgrPktsAg1hMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207387: fltTcaL2EgrPktsAg1dMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207388: fltTcaL2EgrPktsAg1wMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207389: fltTcaL2EgrPktsAg1moMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207390: fltTcaL2EgrPktsAg1qtrMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207391: fltTcaL2EgrPktsAg1yearMulticastRate

Severity: variable

Explanation: This fault is caused by "egress multicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress multicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207440: fltTcaL2EgrPkts5minUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207441: fltTcaL2EgrPkts15minUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207442: fltTcaL2EgrPkts1hUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207443: fltTcaL2EgrPkts1dUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207444: fltTcaL2EgrPkts1wUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207445: fltTcaL2EgrPkts1moUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207446: fltTcaL2EgrPkts1qtrUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207447: fltTcaL2EgrPkts1yearUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207456: fltTcaL2EgrPkts5minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207457: fltTcaL2EgrPkts15minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207458: fltTcaL2EgrPkts1hUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207459: fltTcaL2EgrPkts1dUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207460: fltTcaL2EgrPkts1wUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207461: fltTcaL2EgrPkts1moUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207462: fltTcaL2EgrPkts1qtrUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207463: fltTcaL2EgrPkts1yearUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207464: fltTcaL2EgrPkts5minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207465: fltTcaL2EgrPkts15minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207466: fltTcaL2EgrPkts1hUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207467: fltTcaL2EgrPkts1dUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207468: fltTcaL2EgrPkts1wUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207469: fltTcaL2EgrPkts1moUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207470: fltTcaL2EgrPkts1qtrUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207471: fltTcaL2EgrPkts1yearUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207472: fltTcaL2EgrPkts5minUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207473: fltTcaL2EgrPkts15minUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207474: fltTcaL2EgrPkts1hUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207475: fltTcaL2EgrPkts1dUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207476: fltTcaL2EgrPkts1wUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207477: fltTcaL2EgrPkts1moUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207478: fltTcaL2EgrPkts1qtrUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207479: fltTcaL2EgrPkts1yearUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207480: fltTcaL2EgrPkts5minUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207481: fltTcaL2EgrPkts15minUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207482: fltTcaL2EgrPkts1hUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207483: fltTcaL2EgrPkts1dUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207484: fltTcaL2EgrPkts1wUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207485: fltTcaL2EgrPkts1moUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207486: fltTcaL2EgrPkts1qtrUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207487: fltTcaL2EgrPkts1yearUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207488: fltTcaL2EgrPkts5minUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207489: fltTcaL2EgrPkts15minUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207490: fltTcaL2EgrPkts1hUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207491: fltTcaL2EgrPkts1dUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207492: fltTcaL2EgrPkts1wUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207493: fltTcaL2EgrPkts1moUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207494: fltTcaL2EgrPkts1qtrUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207495: fltTcaL2EgrPkts1yearUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207520: fltTcaL2EgrPkts5minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207521: fltTcaL2EgrPkts15minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207522: fltTcaL2EgrPkts1hUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207523: fltTcaL2EgrPkts1dUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207524: fltTcaL2EgrPkts1wUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207525: fltTcaL2EgrPkts1moUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207526: fltTcaL2EgrPkts1qtrUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207527: fltTcaL2EgrPkts1yearUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207528: fltTcaL2EgrPkts5minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207529: fltTcaL2EgrPkts15minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207530: fltTcaL2EgrPkts1hUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207531: fltTcaL2EgrPkts1dUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207532: fltTcaL2EgrPkts1wUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207533: fltTcaL2EgrPkts1moUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207534: fltTcaL2EgrPkts1qtrUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207535: fltTcaL2EgrPkts1yearUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207608: fltTcaL2EgrPktsPart5minUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207609: fltTcaL2EgrPktsPart15minUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207610: fltTcaL2EgrPktsPart1hUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207611: fltTcaL2EgrPktsPart1dUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207612: fltTcaL2EgrPktsPart1wUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207613: fltTcaL2EgrPktsPart1moUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207614: fltTcaL2EgrPktsPart1qtrUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207615: fltTcaL2EgrPktsPart1yearUnicastLast

Severity: variable

Explanation: This fault is caused by "egress unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207624: fltTcaL2EgrPktsPart5minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207625: fltTcaL2EgrPktsPart15minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207626: fltTcaL2EgrPktsPart1hUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207627: fltTcaL2EgrPktsPart1dUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207628: fltTcaL2EgrPktsPart1wUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207629: fltTcaL2EgrPktsPart1moUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207630: fltTcaL2EgrPktsPart1qtrUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207631: fltTcaL2EgrPktsPart1yearUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207632: fltTcaL2EgrPktsPart5minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207633: fltTcaL2EgrPktsPart15minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207634: fltTcaL2EgrPktsPart1hUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207635: fltTcaL2EgrPktsPart1dUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207636: fltTcaL2EgrPktsPart1wUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207637: fltTcaL2EgrPktsPart1moUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207638: fltTcaL2EgrPktsPart1qtrUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207639: fltTcaL2EgrPktsPart1yearUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207640: fltTcaL2EgrPktsPart5minUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207641: fltTcaL2EgrPktsPart15minUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207642: fltTcaL2EgrPktsPart1hUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207643: fltTcaL2EgrPktsPart1dUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207644: fltTcaL2EgrPktsPart1wUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207645: fltTcaL2EgrPktsPart1moUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207646: fltTcaL2EgrPktsPart1qtrUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207647: fltTcaL2EgrPktsPart1yearUnicastMin

Severity: variable

Explanation: This fault is caused by "egress unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207648: fltTcaL2EgrPktsPart5minUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207649: fltTcaL2EgrPktsPart15minUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207650: fltTcaL2EgrPktsPart1hUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207651: fltTcaL2EgrPktsPart1dUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207652: fltTcaL2EgrPktsPart1wUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207653: fltTcaL2EgrPktsPart1moUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207654: fltTcaL2EgrPktsPart1qtrUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207655: fltTcaL2EgrPktsPart1yearUnicastMax

Severity: variable

Explanation: This fault is caused by "egress unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207656: fltTcaL2EgrPktsPart5minUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207657: fltTcaL2EgrPktsPart15minUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207658: fltTcaL2EgrPktsPart1hUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207659: fltTcaL2EgrPktsPart1dUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207660: fltTcaL2EgrPktsPart1wUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207661: fltTcaL2EgrPktsPart1moUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207662: fltTcaL2EgrPktsPart1qtrUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207663: fltTcaL2EgrPktsPart1yearUnicastAvg

Severity: variable

Explanation: This fault is caused by "egress unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207688: fltTcaL2EgrPktsPart5minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207689: fltTcaL2EgrPktsPart15minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207690: fltTcaL2EgrPktsPart1hUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207691: fltTcaL2EgrPktsPart1dUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207692: fltTcaL2EgrPktsPart1wUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207693: fltTcaL2EgrPktsPart1moUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207694: fltTcaL2EgrPktsPart1qtrUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207695: fltTcaL2EgrPktsPart1yearUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207696: fltTcaL2EgrPktsPart5minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207697: fltTcaL2EgrPktsPart15minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207698: fltTcaL2EgrPktsPart1hUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207699: fltTcaL2EgrPktsPart1dUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207700: fltTcaL2EgrPktsPart1wUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207701: fltTcaL2EgrPktsPart1moUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207702: fltTcaL2EgrPktsPart1qtrUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207703: fltTcaL2EgrPktsPart1yearUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207776: fltTcaL2EgrPktsAg5minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207777: fltTcaL2EgrPktsAg15minUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207778: fltTcaL2EgrPktsAg1hUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207779: fltTcaL2EgrPktsAg1dUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207780: fltTcaL2EgrPktsAg1wUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207781: fltTcaL2EgrPktsAg1moUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207782: fltTcaL2EgrPktsAg1qtrUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207783: fltTcaL2EgrPktsAg1yearUnicastCum

Severity: variable

Explanation: This fault is caused by "egress unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207784: fltTcaL2EgrPktsAg5minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207785: fltTcaL2EgrPktsAg15minUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207786: fltTcaL2EgrPktsAg1hUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207787: fltTcaL2EgrPktsAg1dUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207788: fltTcaL2EgrPktsAg1wUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207789: fltTcaL2EgrPktsAg1moUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207790: fltTcaL2EgrPktsAg1qtrUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207791: fltTcaL2EgrPktsAg1yearUnicastPer

Severity: variable

Explanation: This fault is caused by "egress unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207816: fltTcaL2EgrPktsAg5minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207817: fltTcaL2EgrPktsAg15minUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207818: fltTcaL2EgrPktsAg1hUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207819: fltTcaL2EgrPktsAg1dUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207820: fltTcaL2EgrPktsAg1wUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207821: fltTcaL2EgrPktsAg1moUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207822: fltTcaL2EgrPktsAg1qtrUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207823: fltTcaL2EgrPktsAg1yearUnicastTr

Severity: variable

Explanation: This fault is caused by "egress unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207824: fltTcaL2EgrPktsAg5minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207825: fltTcaL2EgrPktsAg15minUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207826: fltTcaL2EgrPktsAg1hUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207827: fltTcaL2EgrPktsAg1dUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207828: fltTcaL2EgrPktsAg1wUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207829: fltTcaL2EgrPktsAg1moUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207830: fltTcaL2EgrPktsAg1qtrUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207831: fltTcaL2EgrPktsAg1yearUnicastRate

Severity: variable

Explanation: This fault is caused by "egress unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "egress unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207952: fltTcaProcSysCPU5minIdleAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207953: fltTcaProcSysCPU15minIdleAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207954: fltTcaProcSysCPU1hIdleAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207955: fltTcaProcSysCPU1dIdleAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207956: fltTcaProcSysCPU1wIdleAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207957: fltTcaProcSysCPU1moIdleAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207958: fltTcaProcSysCPU1qtrIdleAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207959: fltTcaProcSysCPU1yearIdleAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207960: fltTcaProcSysCPU5minIdleAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207961: fltTcaProcSysCPU15minIdleAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207962: fltTcaProcSysCPU1hIdleAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207963: fltTcaProcSysCPU1dIdleAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207964: fltTcaProcSysCPU1wIdleAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207965: fltTcaProcSysCPU1moIdleAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207966: fltTcaProcSysCPU1qtrIdleAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207967: fltTcaProcSysCPU1yearIdleAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207968: fltTcaProcSysCPU5minIdleAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207969: fltTcaProcSysCPU15minIdleAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207970: fltTcaProcSysCPU1hIdleAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207971: fltTcaProcSysCPU1dIdleAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207972: fltTcaProcSysCPU1wIdleAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207973: fltTcaProcSysCPU1moIdleAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207974: fltTcaProcSysCPU1qtrIdleAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207975: fltTcaProcSysCPU1yearIdleAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207976: fltTcaProcSysCPU5minIdleAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207977: fltTcaProcSysCPU15minIdleAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207978: fltTcaProcSysCPU1hIdleAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207979: fltTcaProcSysCPU1dIdleAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207980: fltTcaProcSysCPU1wIdleAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207981: fltTcaProcSysCPU1moIdleAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207982: fltTcaProcSysCPU1qtrIdleAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F207983: fltTcaProcSysCPU1yearIdleAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208016: fltTcaProcSysCPU5minIdleAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208017: fltTcaProcSysCPU15minIdleAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208018: fltTcaProcSysCPU1hIdleAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208019: fltTcaProcSysCPU1dIdleAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208020: fltTcaProcSysCPU1wIdleAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208021: fltTcaProcSysCPU1moIdleAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208022: fltTcaProcSysCPU1qtrIdleAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208023: fltTcaProcSysCPU1yearIdleAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute idle CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute idle CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208072: fltTcaProcSysCPU5minKernelAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208073: fltTcaProcSysCPU15minKernelAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208074: fltTcaProcSysCPU1hKernelAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208075: fltTcaProcSysCPU1dKernelAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208076: fltTcaProcSysCPU1wKernelAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208077: fltTcaProcSysCPU1moKernelAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208078: fltTcaProcSysCPU1qtrKernelAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208079: fltTcaProcSysCPU1yearKernelAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208080: fltTcaProcSysCPU5minKernelAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208081: fltTcaProcSysCPU15minKernelAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208082: fltTcaProcSysCPU1hKernelAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208083: fltTcaProcSysCPU1dKernelAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208084: fltTcaProcSysCPU1wKernelAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208085: fltTcaProcSysCPU1moKernelAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208086: fltTcaProcSysCPU1qtrKernelAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208087: fltTcaProcSysCPU1yearKernelAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208088: fltTcaProcSysCPU5minKernelAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208089: fltTcaProcSysCPU15minKernelAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208090: fltTcaProcSysCPU1hKernelAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208091: fltTcaProcSysCPU1dKernelAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208092: fltTcaProcSysCPU1wKernelAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208093: fltTcaProcSysCPU1moKernelAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208094: fltTcaProcSysCPU1qtrKernelAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208095: fltTcaProcSysCPU1yearKernelAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208096: fltTcaProcSysCPU5minKernelAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208097: fltTcaProcSysCPU15minKernelAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208098: fltTcaProcSysCPU1hKernelAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208099: fltTcaProcSysCPU1dKernelAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F2081: fltHvsSecGrpOperIssues

Severity: minor

Explanation: This fault is raised when issues are detected with security group learned from vShield/NSX.

F208100: fltTcaProcSysCPU1wKernelAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208101: fltTcaProcSysCPU1moKernelAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208102: fltTcaProcSysCPU1qtrKernelAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208103: fltTcaProcSysCPU1yearKernelAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208136: fltTcaProcSysCPU5minKernelAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208137: fltTcaProcSysCPU15minKernelAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208138: fltTcaProcSysCPU1hKernelAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208139: fltTcaProcSysCPU1dKernelAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208140: fltTcaProcSysCPU1wKernelAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208141: fltTcaProcSysCPU1moKernelAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208142: fltTcaProcSysCPU1qtrKernelAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208143: fltTcaProcSysCPU1yearKernelAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute kernel CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute kernel CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208192: fltTcaProcSysCPU5minUserAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208193: fltTcaProcSysCPU15minUserAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208194: fltTcaProcSysCPU1hUserAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208195: fltTcaProcSysCPU1dUserAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208196: fltTcaProcSysCPU1wUserAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208197: fltTcaProcSysCPU1moUserAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208198: fltTcaProcSysCPU1qtrUserAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208199: fltTcaProcSysCPU1yearUserAverage1mLast

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average current value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208200: fltTcaProcSysCPU5minUserAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208201: fltTcaProcSysCPU15minUserAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208202: fltTcaProcSysCPU1hUserAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208203: fltTcaProcSysCPU1dUserAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208204: fltTcaProcSysCPU1wUserAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208205: fltTcaProcSysCPU1moUserAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208206: fltTcaProcSysCPU1qtrUserAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208207: fltTcaProcSysCPU1yearUserAverage1mMin

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208208: fltTcaProcSysCPU5minUserAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208209: fltTcaProcSysCPU15minUserAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208210: fltTcaProcSysCPU1hUserAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208211: fltTcaProcSysCPU1dUserAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208212: fltTcaProcSysCPU1wUserAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208213: fltTcaProcSysCPU1moUserAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208214: fltTcaProcSysCPU1qtrUserAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208215: fltTcaProcSysCPU1yearUserAverage1mMax

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208216: fltTcaProcSysCPU5minUserAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208217: fltTcaProcSysCPU15minUserAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208218: fltTcaProcSysCPU1hUserAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208219: fltTcaProcSysCPU1dUserAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208220: fltTcaProcSysCPU1wUserAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208221: fltTcaProcSysCPU1moUserAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208222: fltTcaProcSysCPU1qtrUserAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208223: fltTcaProcSysCPU1yearUserAverage1mAvg

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average average value" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208256: fltTcaProcSysCPU5minUserAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208257: fltTcaProcSysCPU15minUserAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208258: fltTcaProcSysCPU1hUserAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208259: fltTcaProcSysCPU1dUserAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208260: fltTcaProcSysCPU1wUserAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208261: fltTcaProcSysCPU1moUserAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208262: fltTcaProcSysCPU1qtrUserAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F208263: fltTcaProcSysCPU1yearUserAverage1mTr

Severity: variable

Explanation: This fault is caused by "1 minute user CPU average trend" statistical property crossing threshold level.

Recommended Action: Check the values of "1 minute user CPU average" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F2100: fltVmmRsEncapAllctrResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2105: fltL3extRsInterleakPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2107: fltDppIfOperStFailed

Severity: major

Explanation: This fault occurs when Data Plane Policer policy fails.

F2108: fltFirmwareFwLocalFirmwareSyncFailure

Severity: major

Explanation: This fault occurs when a image is being replicated across all ifcs

F2109: fltFirmwareRepoLocalFirmwareSyncFailure

Severity: major

Explanation: This fault occurs when a image is not synced across all ifcs

F2110: fltL3extRsSubnetToRtSummResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2111: fltL3extRsDampeningPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2121: fltFabricProtGEpZoneconfiguration

Severity: critical

Explanation: This fault occurs when a virtual Port Channel (vPC) policy is created but nodes are not part of same zone.

F2123: fltFabricRsNodeCfgSrvResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2132: fltCompEpCPOperIssues

Severity: minor

Explanation: This fault is raised when issues are detected with security group learned from vShield/NSX.

F2133: fltHvsMbrMacConfigIssues

Severity: major

Explanation: This fault is raised when multiple security groups match the same VNic.

F2145: fltBfdRsIfPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2147: fltInfraRsPathToSpAccGrpResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2148: fltInfraRsSpAccGrpResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2149: fltInfraRsSpAccPortPResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2167: fltVsanCktEpVsanmgrCfgCtrl

Severity: warning

Explanation: This fault is caused by a hardware programming failure

Recommended Action: The system will periodically retry to program the hardware. If the failure is due to lack of hardware resources, free up resources by removing or simplifying existing configuration. One of the reasons for lack of hardware resources is exhaustion of VLANs in ToR. These hardware resources can be examined by looking at capacity dashboard under OPERATIONS tab. Please check entry against the number of VLANs in output of command show vlan summary issued at node where fault is generated to check whether it exceeds above advertised node capacity.

F2168: fltBfdAuthPBfdCfgCtrl

Severity: warning

Explanation: This fault is caused by a hardware programming failure

Recommended Action: The system will periodically retry to program the hardware. If the failure is due to lack of hardware resources, free up resources by removing or simplifying existing configuration. One of the reasons for lack of hardware resources is exhaustion of VLANs in ToR. These hardware resources can be examined by looking at capacity dashboard under OPERATIONS tab. Please check entry against the number of VLANs in output of command show vlan summary issued at node where fault is generated to check whether it exceeds above advertised node capacity.

F2169: fltBfdIfAfBfdCfgCtrl

Severity: warning

Explanation: This fault is caused by a hardware programming failure

Recommended Action: The system will periodically retry to program the hardware. If the failure is due to lack of hardware resources, free up resources by removing or simplifying existing configuration. One of the reasons for lack of hardware resources is exhaustion of VLANs in ToR. These hardware resources can be examined by looking at capacity dashboard under OPERATIONS tab. Please check entry against the number of VLANs in output of command show vlan summary issued at node where fault is generated to check whether it exceeds above advertised node capacity.

F2170: fltBfdKaPBfdCfgCtrl

Severity: warning

Explanation: This fault is caused by a hardware programming failure

Recommended Action: The system will periodically retry to program the hardware. If the failure is due to lack of hardware resources, free up resources by removing or simplifying existing configuration. One of the reasons for lack of hardware resources is exhaustion of VLANs in ToR. These hardware resources can be examined by looking at capacity dashboard under OPERATIONS tab. Please check entry against the number of VLANs in output of command show vlan summary issued at node where fault is generated to check whether it exceeds above advertised node capacity.

F2185: fltPimRsIfPolResolveFail

Severity: warning

Explanation: The object refers to an object that was not found.

Recommended Action: Make sure that referenced object exists and the name is spelled correctly in the relation object.

F2190: fltDhcpClientAddressAssignmentFailed

Severity: major

Explanation: This fault is raised when the configured node role doesn't match the role advertized by the node

F2194: fltPconsRADeploymentStatusWithCtx

Severity: major

Explanation: This fault occurs when deployment of policy to another process fails.

F221656: fltTcaOpflexIDEpPolicyDrop5minMcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221657: fltTcaOpflexIDEpPolicyDrop15minMcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221658: fltTcaOpflexIDEpPolicyDrop1hMcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221659: fltTcaOpflexIDEpPolicyDrop1dMcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221660: fltTcaOpflexIDEpPolicyDrop1wMcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221661: fltTcaOpflexIDEpPolicyDrop1moMcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221662: fltTcaOpflexIDEpPolicyDrop1qtrMcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221663: fltTcaOpflexIDEpPolicyDrop1yearMcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221672: fltTcaOpflexIDEpPolicyDrop5minMcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221673: fltTcaOpflexIDEpPolicyDrop15minMcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221674: fltTcaOpflexIDEpPolicyDrop1hMcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221675: fltTcaOpflexIDEpPolicyDrop1dMcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221676: fltTcaOpflexIDEpPolicyDrop1wMcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221677: fltTcaOpflexIDEpPolicyDrop1moMcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221678: fltTcaOpflexIDEpPolicyDrop1qtrMcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221679: fltTcaOpflexIDEpPolicyDrop1yearMcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221680: fltTcaOpflexIDEpPolicyDrop5minMcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221681: fltTcaOpflexIDEpPolicyDrop15minMcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221682: fltTcaOpflexIDEpPolicyDrop1hMcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221683: fltTcaOpflexIDEpPolicyDrop1dMcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221684: fltTcaOpflexIDEpPolicyDrop1wMcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221685: fltTcaOpflexIDEpPolicyDrop1moMcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221686: fltTcaOpflexIDEpPolicyDrop1qtrMcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221687: fltTcaOpflexIDEpPolicyDrop1yearMcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221688: fltTcaOpflexIDEpPolicyDrop5minMcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221689: fltTcaOpflexIDEpPolicyDrop15minMcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221690: fltTcaOpflexIDEpPolicyDrop1hMcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221691: fltTcaOpflexIDEpPolicyDrop1dMcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221692: fltTcaOpflexIDEpPolicyDrop1wMcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221693: fltTcaOpflexIDEpPolicyDrop1moMcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221694: fltTcaOpflexIDEpPolicyDrop1qtrMcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221695: fltTcaOpflexIDEpPolicyDrop1yearMcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221696: fltTcaOpflexIDEpPolicyDrop5minMcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221697: fltTcaOpflexIDEpPolicyDrop15minMcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221698: fltTcaOpflexIDEpPolicyDrop1hMcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221699: fltTcaOpflexIDEpPolicyDrop1dMcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221700: fltTcaOpflexIDEpPolicyDrop1wMcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221701: fltTcaOpflexIDEpPolicyDrop1moMcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221702: fltTcaOpflexIDEpPolicyDrop1qtrMcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221703: fltTcaOpflexIDEpPolicyDrop1yearMcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221704: fltTcaOpflexIDEpPolicyDrop5minMcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221705: fltTcaOpflexIDEpPolicyDrop15minMcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221706: fltTcaOpflexIDEpPolicyDrop1hMcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221707: fltTcaOpflexIDEpPolicyDrop1dMcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221708: fltTcaOpflexIDEpPolicyDrop1wMcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221709: fltTcaOpflexIDEpPolicyDrop1moMcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221710: fltTcaOpflexIDEpPolicyDrop1qtrMcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221711: fltTcaOpflexIDEpPolicyDrop1yearMcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221736: fltTcaOpflexIDEpPolicyDrop5minMcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221737: fltTcaOpflexIDEpPolicyDrop15minMcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221738: fltTcaOpflexIDEpPolicyDrop1hMcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221739: fltTcaOpflexIDEpPolicyDrop1dMcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221740: fltTcaOpflexIDEpPolicyDrop1wMcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221741: fltTcaOpflexIDEpPolicyDrop1moMcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221742: fltTcaOpflexIDEpPolicyDrop1qtrMcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221743: fltTcaOpflexIDEpPolicyDrop1yearMcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221744: fltTcaOpflexIDEpPolicyDrop5minMcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221745: fltTcaOpflexIDEpPolicyDrop15minMcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221746: fltTcaOpflexIDEpPolicyDrop1hMcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221747: fltTcaOpflexIDEpPolicyDrop1dMcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221748: fltTcaOpflexIDEpPolicyDrop1wMcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221749: fltTcaOpflexIDEpPolicyDrop1moMcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221750: fltTcaOpflexIDEpPolicyDrop1qtrMcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221751: fltTcaOpflexIDEpPolicyDrop1yearMcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped multicast/broadcast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped multicast/broadcast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221824: fltTcaOpflexIDEpPolicyDrop5minUcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221825: fltTcaOpflexIDEpPolicyDrop15minUcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221826: fltTcaOpflexIDEpPolicyDrop1hUcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221827: fltTcaOpflexIDEpPolicyDrop1dUcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221828: fltTcaOpflexIDEpPolicyDrop1wUcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221829: fltTcaOpflexIDEpPolicyDrop1moUcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221830: fltTcaOpflexIDEpPolicyDrop1qtrUcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221831: fltTcaOpflexIDEpPolicyDrop1yearUcastLast

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets current value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221840: fltTcaOpflexIDEpPolicyDrop5minUcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221841: fltTcaOpflexIDEpPolicyDrop15minUcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221842: fltTcaOpflexIDEpPolicyDrop1hUcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221843: fltTcaOpflexIDEpPolicyDrop1dUcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221844: fltTcaOpflexIDEpPolicyDrop1wUcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221845: fltTcaOpflexIDEpPolicyDrop1moUcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221846: fltTcaOpflexIDEpPolicyDrop1qtrUcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221847: fltTcaOpflexIDEpPolicyDrop1yearUcastCum

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221848: fltTcaOpflexIDEpPolicyDrop5minUcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221849: fltTcaOpflexIDEpPolicyDrop15minUcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221850: fltTcaOpflexIDEpPolicyDrop1hUcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221851: fltTcaOpflexIDEpPolicyDrop1dUcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221852: fltTcaOpflexIDEpPolicyDrop1wUcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221853: fltTcaOpflexIDEpPolicyDrop1moUcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221854: fltTcaOpflexIDEpPolicyDrop1qtrUcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221855: fltTcaOpflexIDEpPolicyDrop1yearUcastPer

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221856: fltTcaOpflexIDEpPolicyDrop5minUcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221857: fltTcaOpflexIDEpPolicyDrop15minUcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221858: fltTcaOpflexIDEpPolicyDrop1hUcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221859: fltTcaOpflexIDEpPolicyDrop1dUcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221860: fltTcaOpflexIDEpPolicyDrop1wUcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221861: fltTcaOpflexIDEpPolicyDrop1moUcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221862: fltTcaOpflexIDEpPolicyDrop1qtrUcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221863: fltTcaOpflexIDEpPolicyDrop1yearUcastMin

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets minimum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221864: fltTcaOpflexIDEpPolicyDrop5minUcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221865: fltTcaOpflexIDEpPolicyDrop15minUcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221866: fltTcaOpflexIDEpPolicyDrop1hUcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221867: fltTcaOpflexIDEpPolicyDrop1dUcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221868: fltTcaOpflexIDEpPolicyDrop1wUcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221869: fltTcaOpflexIDEpPolicyDrop1moUcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221870: fltTcaOpflexIDEpPolicyDrop1qtrUcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221871: fltTcaOpflexIDEpPolicyDrop1yearUcastMax

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets maximum value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221872: fltTcaOpflexIDEpPolicyDrop5minUcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221873: fltTcaOpflexIDEpPolicyDrop15minUcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221874: fltTcaOpflexIDEpPolicyDrop1hUcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221875: fltTcaOpflexIDEpPolicyDrop1dUcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221876: fltTcaOpflexIDEpPolicyDrop1wUcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221877: fltTcaOpflexIDEpPolicyDrop1moUcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221878: fltTcaOpflexIDEpPolicyDrop1qtrUcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221879: fltTcaOpflexIDEpPolicyDrop1yearUcastAvg

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets average value" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221904: fltTcaOpflexIDEpPolicyDrop5minUcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221905: fltTcaOpflexIDEpPolicyDrop15minUcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221906: fltTcaOpflexIDEpPolicyDrop1hUcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221907: fltTcaOpflexIDEpPolicyDrop1dUcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221908: fltTcaOpflexIDEpPolicyDrop1wUcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221909: fltTcaOpflexIDEpPolicyDrop1moUcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221910: fltTcaOpflexIDEpPolicyDrop1qtrUcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221911: fltTcaOpflexIDEpPolicyDrop1yearUcastTr

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets trend" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221912: fltTcaOpflexIDEpPolicyDrop5minUcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221913: fltTcaOpflexIDEpPolicyDrop15minUcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221914: fltTcaOpflexIDEpPolicyDrop1hUcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221915: fltTcaOpflexIDEpPolicyDrop1dUcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221916: fltTcaOpflexIDEpPolicyDrop1wUcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221917: fltTcaOpflexIDEpPolicyDrop1moUcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221918: fltTcaOpflexIDEpPolicyDrop1qtrUcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F221919: fltTcaOpflexIDEpPolicyDrop1yearUcastRate

Severity: variable

Explanation: This fault is caused by "policy dropped unicast packets rate" statistical property crossing threshold level.

Recommended Action: Check the values of "policy dropped unicast packets" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222432: fltTcaDppEgrAllow5minBytesLast

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222433: fltTcaDppEgrAllow15minBytesLast

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222434: fltTcaDppEgrAllow1hBytesLast

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222435: fltTcaDppEgrAllow1dBytesLast

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222436: fltTcaDppEgrAllow1wBytesLast

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222437: fltTcaDppEgrAllow1moBytesLast

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222438: fltTcaDppEgrAllow1qtrBytesLast

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222439: fltTcaDppEgrAllow1yearBytesLast

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes current value" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222448: fltTcaDppEgrAllow5minBytesCum

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222449: fltTcaDppEgrAllow15minBytesCum

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222450: fltTcaDppEgrAllow1hBytesCum

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222451: fltTcaDppEgrAllow1dBytesCum

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222452: fltTcaDppEgrAllow1wBytesCum

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222453: fltTcaDppEgrAllow1moBytesCum

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222454: fltTcaDppEgrAllow1qtrBytesCum

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222455: fltTcaDppEgrAllow1yearBytesCum

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes cumulative" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222456: fltTcaDppEgrAllow5minBytesPer

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222457: fltTcaDppEgrAllow15minBytesPer

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes periodic" statistical property crossing threshold level.

Recommended Action: Check the values of "Egress Policer Allowed Bytes" statistical counter and either correct the conditions that cause the counter values to cross certain threshold levels, or adjust the threshold values in monitoring policies.

F222458: fltTcaDppEgrAllow1hBytesPer

Severity: variable

Explanation: This fault is caused by "Egress Policer Allowed Bytes periodic" statistical property crossing threshold level.