sak-expiry-time x in <0-0> or <60-2592000>

Description: Configure the Security Association Key Expiry Time (in sec)

Syntax:

Command Mode: template macsec access|fabric security-policy : Configure MAC security policy parameters

Command Path:

# configure [['terminal', 't']]
(config)# template macsec access|fabric security-policy <WORD>
(config-macsec-param)# sak-expiry-time x in <0-0> or <60-2592000>

sakexpirytime <NUMBER>

Description: Configure the Security Association Key Expiry Time (in minutes)

Syntax:

Command Mode: template cloudsec : Configure cloudsec Policies

Command Path:

# configure [['terminal', 't']]
(config)# template cloudsec <WORD>
(config-cloudsec)# sakexpirytime <NUMBER>

sampling-rate <samplingRate>

Description: Configure Sampling Rate

Syntax:

Command Mode: flow exporter : Configure NetFlow Exporter Policy

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD> [delimiter <WORD>] [access-mode <access-mode>] [number-of-uplinks <number-of-uplinks>]
(config-vmware)# configure-dvs
(config-vmware-dvs)# flow exporter <WORD>
(config-vmware-dvs-flow-exporter)# sampling-rate <samplingRate>

sampling-rate <samplingRate>

Description: Configure Sampling Rate

Syntax:

Command Mode: flow exporter : Configure NetFlow Exporter Policy

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD> [delimiter <WORD>] [access-mode <access-mode>] [number-of-uplinks <number-of-uplinks>]
(config-vmware)# configure-avs
(config-vmware-avs)# flow exporter <WORD>
(config-None)# sampling-rate <samplingRate>

sampling-rate <samplingRate>

Description: Configure Sampling Rate

Syntax:

Command Mode: flow exporter : Configure NetFlow Exporter Policy

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD> [delimiter <WORD>] [access-mode <access-mode>] [number-of-uplinks <number-of-uplinks>]
(config-vmware)# configure-ave
(config-vmware-ave)# flow exporter <WORD>
(config-None)# sampling-rate <samplingRate>

scale-profile <WORD>

Description: Configure Forwarding Scale Profile policy

Syntax:

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# scale-profile <WORD>

scale-profile <arg>

Description: Add Forwarding Scale Profile policy

Syntax:

Command Mode: template leaf-policy-group : Configure Leaf Policy Group

Command Path:

# configure [['terminal', 't']]
(config)# template leaf-policy-group <WORD>
(config-leaf-policy-group)# scale-profile <>

schedule <WORD>

Description: Assign a scheduler

Syntax:

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# schedule <WORD>

schedule <WORD>

Description: Schedule snapshot export

Syntax:

Command Mode: snapshot export : Configuration export setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot export <WORD>
(config-export)# schedule <WORD>

scheduler pause

Description: Pause maintenance policy scheduler

Syntax:

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# scheduler pause

scheduler fabric|controller schedule <WORD>

Description: Scheduler configuration mode

Syntax:

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>

scheduling <WORD>

Description: Set the scheduling algorithm

Syntax:

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters <WORD>
(config-qos)# scheduling <WORD>

scope <WORD>

Description: Specify the scope for the contract

Syntax:

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# scope <WORD>

scope <WORD>

Description: Configure Useg EPG scope

Syntax:

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# scope <WORD>

scope combinable

Description: Set route-profile scope

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# scope combinable

scope global

Description: Set scope

Syntax:

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# scope global

scope combinable

Description: Set route-profile scope

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# scope combinable

scope global

Description: Set scope

Syntax:

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# scope global

scvmm <arg> cloud <WORD> [name <name>]

Description: Configure an SCVMM in the Microsoft domain

Syntax:

Command Mode: microsoft-domain : Create a VMM Microsoft Domain

Command Path:

# configure [['terminal', 't']]
(config)# microsoft-domain <WORD> [delimiter <WORD>]
(config-microsoft)# scvmm <> cloud <WORD> [name <name>]

sdwan-sla <WORD>

Description: Associate a Contract Subject to a SDWan SLA policy

Syntax:

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# sdwan-sla <WORD>

sdwan-vpn <WORD>

Description: Associate a Context to a SDWan VPN

Syntax:

Command Mode: vrf : Configuration for vrf

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# sdwan-vpn <WORD>

second-file <FILENAME>

Description: Second snapshot file name

Syntax:

Command Mode: snapshot rollback : Configuration rollback setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot rollback <WORD>
(config-rollback)# second-file <FILENAME>

security-domain <WORD>

Description: Add security domain

Syntax:

Command Mode: vlan-domain : Configure vlan domain

Command Path:

# configure [['terminal', 't']]
(config)# vlan-domain <name> [dynamic] [type <domain-type>]
(config-vlan)# security-domain <WORD>

security-domain <WORD>

Description: Add a security domain to this VMware domain

Syntax:

Command Mode: vmware-domain : Create a VMM VMWare Domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD> [delimiter <WORD>] [access-mode <access-mode>] [number-of-uplinks <number-of-uplinks>]
(config-vmware)# security-domain <WORD>

security-mode <arg>

Description: Configure whether all traffic or only encrypted traffic can flow through

Syntax:

Command Mode: template macsec access|fabric security-policy : Configure MAC security policy parameters

Command Path:

# configure [['terminal', 't']]
(config)# template macsec access|fabric security-policy <WORD>
(config-macsec-param)# security-mode <>

security-policy <WORD>

Description: Configuration for security policy

Syntax:

Command Mode: first-hop-security : Configuration for first hop security

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# first-hop-security
(config-tenant-fhs)# security-policy <WORD>

security domain <WORD>

Description: Add a security domain to the tenant

Syntax:

Command Mode: tenant : Tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# security domain <WORD>

security allow-promiscuous <WORD>

Description: Enable/Disable promiscuous mode

Syntax:

Command Mode: vmware-domain : Associate EPG to a VMWare Domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>] [allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [binding-type staticBinding|dynamicBinding|ephemeral] [port-allocation fixed|elastic] [num-ports <WORD>] [untagged-access-pg] [delimiter <WORD>]
(config-tenant-app-epg-domain)# security allow-promiscuous <WORD>

security forged-transmits <WORD>

Description: Accept/Reject Forced Transmits

Syntax:

Command Mode: vmware-domain : Associate EPG to a VMWare Domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>] [allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [binding-type staticBinding|dynamicBinding|ephemeral] [port-allocation fixed|elastic] [num-ports <WORD>] [untagged-access-pg] [delimiter <WORD>]
(config-tenant-app-epg-domain)# security forged-transmits <WORD>

security mac-changes <WORD>

Description: Accept/Reject Mac Changes

Syntax:

Command Mode: vmware-domain : Associate EPG to a VMWare Domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>] [allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [binding-type staticBinding|dynamicBinding|ephemeral] [port-allocation fixed|elastic] [num-ports <WORD>] [untagged-access-pg] [delimiter <WORD>]
(config-tenant-app-epg-domain)# security mac-changes <WORD>

send-community [extended]

Description: Send Community attribute to this neighbor

Syntax:

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# send-community [extended]

send-community [extended]

Description: Send Community attribute to this neighbor

Syntax:

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# send-community [extended]

server-group <WORD>

Description: server group configuration mode

Syntax:

Command Mode: tacacslog-monitoring : TacacsLog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tacacslog-monitoring common tacacslog-src <WORD>
(config-tacacslog-monitoring)# server-group <WORD>

server-mode

Description: Server Mode for NTP Server

Command Mode: ntp : Configure the default ntp policy

Command Path:

# configure [['terminal', 't']]
(config)# pod <NUMBER>
(config-pod)# ntp
(config-ntp)# server-mode

server-mode

Description: Server Mode for NTP Server

Command Mode: template ntp-fabric : Network Time Protocol (NTP)

Command Path:

# configure [['terminal', 't']]
(config)# template ntp-fabric <WORD>
(config-template-ntp-fabric)# server-mode

server-monitoring <server-monitoring>

Description: Enable or disable the server monitoring using test user

Syntax:

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# server-monitoring <server-monitoring>

server-monitoring <server-monitoring>

Description: Enable or disable the server monitoring using test user

Syntax:

Command Mode: radius-server host : RADIUS server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# radius-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# server-monitoring <server-monitoring>

server-monitoring <server-monitoring>

Description: Enable or disable the server monitoring using test user

Syntax:

Command Mode: rsa-server host : RSA server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# rsa-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# server-monitoring <server-monitoring>

server-monitoring <server-monitoring>

Description: Enable or disable the server monitoring using test user

Syntax:

Command Mode: tacacs-server host : TACACS+ server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# tacacs-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# server-monitoring <server-monitoring>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add LDAP server to LDAP group

Syntax:

Command Mode: aaa group server ldap : LDAP server group name.

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server ldap <WORD>
(config-ldap)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add RADIUS server to RADIUS group

Syntax:

Command Mode: aaa group server radius : RADIUS server group name.

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server radius <WORD>
(config-radius)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add RSA server to RSA group

Syntax:

Command Mode: aaa group server rsa : RSA server group name.

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server rsa <WORD>
(config-rsa)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add TACACS PLUS server to TACACS PLUS group

Syntax:

Command Mode: aaa group server tacacsplus : TACACS+ server group name.

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server tacacsplus <WORD>
(config-tacacsplus)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <WORD> [prefer] [key <arg>] [use-epg <arg>] [use-vrf <arg>]

Description: Configure ntp servers for the active ntp policy

Syntax:

Command Mode: ntp : Configure the default ntp policy

Command Path:

# configure [['terminal', 't']]
(config)# pod <NUMBER>
(config-pod)# ntp
(config-ntp)# server <WORD> [prefer] [key <>] [use-epg <>] [use-vrf <>]

server <WORD> [prefer] [key <arg>] [use-epg <arg>] [use-vrf <arg>]

Description: Configure ntp servers for the active ntp policy

Syntax:

Command Mode: template ntp-fabric : Network Time Protocol (NTP)

Command Path:

# configure [['terminal', 't']]
(config)# template ntp-fabric <WORD>
(config-template-ntp-fabric)# server <WORD> [prefer] [key <>] [use-epg <>] [use-vrf <>]

server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg <mgmtepg>] [port <port>] [format <format>]

Description: Add a destination server

Syntax:

Command Mode: logging : Logging server group configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# logging server-group <WORD>
(config-logging)# server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg <mgmtepg>] [port <port>] [format <format>]

service-function-profile <funcprof>

Description: Add Function Profile

Syntax:

Command Mode: function-profile : Configure function profile container

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 resource-pool <WORD>
(config-resource-pool)# function-profile <WORD>
(config-function-profile)# service-function-profile <funcprof>

service-policy type data-plane|control-plane-if <arg> <WORD>

Description: QOS service policy

Syntax:

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-po-ch-if)# service-policy type data-plane|control-plane-if <> <WORD>

service-policy <WORD>

Description: Specify the QOS service policy

Syntax:

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# service-policy <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# service-policy type data-plane input|output <WORD>

service-policy type control-plane-if <arg> <WORD>

Description: QOS policy for Control Plane Policing

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# service-policy type control-plane-if <> <WORD>

service-policy type control-plane-if <arg> <WORD>

Description: QOS policy for Control Plane Policing

Syntax:

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# service-policy type control-plane-if <> <WORD>

service-policy type control-plane-if <arg> <WORD>

Description: QOS policy for Control Plane Policing

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# service-policy type control-plane-if <> <WORD>

service-policy type control-plane-if <arg> <WORD>

Description: QOS policy for Control Plane Policing

Syntax:

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# service-policy type control-plane-if <> <WORD>

service-policy type data-plane <WORD>

Description: Data plane Policy

Syntax:

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# service-policy type data-plane <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS policy for Data Plane Policing

Syntax:

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane <arg> <WORD>

Description: QOS policy for Data Plane Policing

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# service-policy type data-plane <> <WORD>

service-policy type data-plane <arg> <WORD>

Description: QOS policy for Data Plane Policing

Syntax:

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# service-policy type data-plane <> <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS policy for Data Plane Policing

Syntax:

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface vlan <1-4094>
(config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane <arg> <WORD>

Description: QOS policy for Data Plane Policing

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# service-policy type data-plane <> <WORD>

service-policy type data-plane <arg> <WORD>

Description: QOS policy for Data Plane Policing

Syntax:

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# service-policy type data-plane <> <WORD>

service-policy type qos <WORD>

Description: Qos Policy

Syntax:

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# service-policy type qos <WORD>

service-policy type qos <WORD>

Description: QOS service policy

Syntax:

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# service-policy type qos <WORD>

service-policy type qos <WORD>

Description: QOS service policy

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# service-policy type qos <WORD>

service-policy type qos <WORD>

Description: QOS service policy

Syntax:

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# service-policy type qos <WORD>

service-policy type qos <WORD>

Description: QOS service policy

Syntax:

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface vlan <1-4094>
(config-leaf-if)# service-policy type qos <WORD>

service-policy type qos <WORD>

Description: QOS service policy

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# service-policy type qos <WORD>

service-policy type qos <WORD>

Description: QOS service policy

Syntax:

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# service-policy type qos <WORD>

service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>] [svcredir <Service Redirection>] [service-type <Service Type>]

Description: Configure L4-L7 Service

Syntax:

Command Mode: l4l7 graph : Configure L4-L7 Service Graph

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>] [svcredir <Service Redirection>] [service-type <Service Type>]

session-record-flags <sessionRecordFlags>

Description: Enable/Disable refresh in the session records, Comma separated values

Syntax:

Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.

Command Path:

# configure [['terminal', 't']]
(config)# crypto webtoken
(config-webtoken)# session-record-flags <sessionRecordFlags>

set <propType> <propVal>

Description: Customize leaf aggregate policy values for Control Plane Policing

Syntax:

Command Mode: policy-map type control-plane-leaf : Create leaf aggregate ControlPlane policy to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type control-plane-leaf <WORD>
(config-pmap-copp-leaf)# set <propType> <propVal>

set <propType> <propVal>

Description: Customize spine aggregate policy values for Control Plane Policing

Syntax:

Command Mode: policy-map type control-plane-spine : Create spine aggregate ControlPlane policy to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type control-plane-spine <WORD>
(config-pmap-copp-spine)# set <propType> <propVal>

set qos-class <WORD>

Description: QOS level for the epg

Syntax:

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# set qos-class <WORD>

set qos-class <WORD>

Description: QOS level for the application

Syntax:

Command Mode: application : application configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# set qos-class <WORD>

set qos-class <WORD>

Description: QOS level for the tunnel

Syntax:

Command Mode: dot1q-tunnel : Tunnel configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# dot1q-tunnel <WORD>
(config-tenant-tunnel)#set qos-class <WORD>

set qos-class <contractQosLevel>

Description: Specify the QOS level for the epg

Syntax:

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# set qos-class <contractQosLevel>

set qos-class <WORD>

Description: QOS level for the epg

Syntax:

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# set qos-class <WORD>

set qos-class <WORD>

Description: QOS level for the epg

Syntax:

Command Mode: oob-mgmt : Creates/Modify the out of band mgmt under the tenant mgmt

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# oob-mgmt epg <epgval>
(config-oob-epg)# set qos-class <WORD>

set qos-class unspecified|level1|level2|level3|level4|level5|level6

Description: QOS level for interface

Syntax:

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# set qos-class unspecified|level1|level2|level3|level4|level5|level6

set qos-class unspecified|level1|level2|level3|level4|level5|level6

Description: QOS level for interface

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# set qos-class unspecified|level1|level2|level3|level4|level5|level6

set qos-class unspecified|level1|level2|level3|level4|level5|level6

Description: QOS level for interface

Syntax:

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# set qos-class unspecified|level1|level2|level3|level4|level5|level6

set qos-class unspecified|level1|level2|level3|level4|level5|level6

Description: QOS level for interface

Syntax:

Command Mode: virtual-interface-profile : Configure virtual interface profile

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# virtual-interface-profile vlan <1-4094> tenant <WORD> vrf <WORD> [l3out <l3out>]
(virtual-interface-profile)# set qos-class unspecified|level1|level2|level3|level4|level5|level6

set qos-class unspecified|level1|level2|level3|level4|level5|level6

Description: QOS level for interface

Syntax:

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface vlan <1-4094>
(config-leaf-if)# set qos-class unspecified|level1|level2|level3|level4|level5|level6

set qos-class unspecified|level1|level2|level3|level4|level5|level6

Description: QOS level for interface

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# set qos-class unspecified|level1|level2|level3|level4|level5|level6

set qos-class unspecified|level1|level2|level3|level4|level5|level6

Description: QOS level for interface

Syntax:

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# set qos-class unspecified|level1|level2|level3|level4|level5|level6

set qos-class unspecified|level1|level2|level3|level4|level5|level6

Description: QOS level for interface

Syntax:

Command Mode: virtual-interface-profile : Configure virtual interface profile

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# virtual-interface-profile vlan <1-4094> tenant <WORD> vrf <WORD> [l3out <l3out>]
(virtual-interface-profile)# set qos-class unspecified|level1|level2|level3|level4|level5|level6

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set addcommunity regular|extended <value>

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set addcommunity regular|extended <value>

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set addcommunity regular|extended <value>

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set addcommunity regular|extended <value>

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set addcommunity regular|extended <value>

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set addcommunity regular|extended <value>

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set addcommunity regular|extended <value>

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set addcommunity regular|extended <value>

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set addcommunity regular|extended <value>

set addcommunity regular|extended <value>

Description: Set BGP additional-community attribute

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set addcommunity regular|extended <value>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set as-path prepend-last-as <NUMBER>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set as-path prepend-last-as <NUMBER>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set as-path prepend-last-as <NUMBER>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set as-path prepend-last-as <NUMBER>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set as-path prepend-last-as <NUMBER>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set as-path prepend-last-as <NUMBER>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set as-path prepend-last-as <NUMBER>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set as-path prepend-last-as <NUMBER>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set as-path prepend-last-as <NUMBER>

set as-path prepend-last-as <NUMBER>

Description: Prepend last AS to the as-path

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set as-path prepend-last-as <NUMBER>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set as-path prepend <1-4294967295>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set as-path prepend <1-4294967295>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set as-path prepend <1-4294967295>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set as-path prepend <1-4294967295>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set as-path prepend <1-4294967295>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set as-path prepend <1-4294967295>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set as-path prepend <1-4294967295>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set as-path prepend <1-4294967295>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set as-path prepend <1-4294967295>

set as-path prepend <1-4294967295>

Description: Prepend to the AS-Path

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set as-path prepend <1-4294967295>

set burst <0-549755813760> UNIT

Description: Burst Rate

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set burst <0-549755813760> UNIT

set burst <0-549755813760> UNIT

Description: Burst Rate

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set burst <0-549755813760> UNIT

set cir <0-4398046510080> UNIT

Description: Committed Rate

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set cir <0-4398046510080> UNIT

set cir <0-4398046510080> UNIT

Description: Committed Rate

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set cir <0-4398046510080> UNIT

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set community regular|extended <value> additive|replace|none

set conform-cos-transmit <0-6>

Description: Conform Policer Mark Cos

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set conform-cos-transmit <0-6>

set conform-cos-transmit <0-6>

Description: Conform Policer Mark Cos

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set conform-cos-transmit <0-6>

set conform-dscp-transmit <0-63>

Description: Conform Policer Mark DSCP

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set conform-dscp-transmit <0-63>

set conform-dscp-transmit <0-63>

Description: Conform Policer Mark DSCP

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set conform-dscp-transmit <0-63>

set conform <WORD>

Description: Conform Policer Action

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set conform <WORD>

set conform <WORD>

Description: Conform Policer Action

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set conform <WORD>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dscp-code <dscp-prop> <dscp-val>

Description: Set DSCP Class translation values

Syntax:

Command Mode: qos : Set DSCP Class translation values

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# qos dscp-map <WORD>
(config-qos-cmap)# set dscp-code <dscp-prop> <dscp-val>

set dscp <WORD>

Description: Specify the DSCP level for the EPG

Syntax:

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]
(config-tenant-l3ext-epg)# set dscp <WORD>

set exceed-cos-transmit <0-6>

Description: Exceed Policer Mark Cos

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set exceed-cos-transmit <0-6>

set exceed-cos-transmit <0-6>

Description: Exceed Policer Mark Cos

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set exceed-cos-transmit <0-6>

set exceed-dscp-transmit <0-63>

Description: Exceed Policer Mark DSCP

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set exceed-dscp-transmit <0-63>

set exceed-dscp-transmit <0-63>

Description: Exceed Policer Mark DSCP

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set exceed-dscp-transmit <0-63>

set exceed <WORD>

Description: Exceed Policer Action

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set exceed <WORD>

set exceed <WORD>

Description: Exceed Policer Action

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set exceed <WORD>

set excessive-burst <0-549755813760> UNIT

Description: Excessive Burst Rate

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set excessive-burst <0-549755813760> UNIT

set excessive-burst <0-549755813760> UNIT

Description: Excessive Burst Rate

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set excessive-burst <0-549755813760> UNIT

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set mac-auth <WORD>

Description: Set MAC Auth

Syntax:

Command Mode: switchport port-authentication : Port authentication configuration

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# switchport port-authentication <WORD>
(config-port-authentication)# set mac-auth <WORD>

set max-reauth-request <1-10>

Description: Set max reauth request

Syntax:

Command Mode: switchport port-authentication : Port authentication configuration

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# switchport port-authentication <WORD>
(config-port-authentication)# set max-reauth-request <1-10>

set max-request <2-10>

Description: Set max request

Syntax:

Command Mode: switchport port-authentication : Port authentication configuration

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# switchport port-authentication <WORD>
(config-port-authentication)# set max-request <2-10>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>
(config-leaf-vrf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>]
(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD> [deny]
(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match route group <> [order <order>] [deny]
(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set mode <WORD>

Description: Policer Mode

Syntax:

Command Mode: policy-map type data-plane : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set mode <WORD>

set mode <WORD>

Description: Policer Mode

Syntax:

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set mode <WORD>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop for destination routing protocol

Syntax:

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax: