The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Description: Set the desired bandwidth to police to
Syntax:
|
<0-100> |
Bandwidth percentage guaranteed as %. Number range from=0 to=100 |
Command Mode: qos parameters : Configure the global QOS policies
Command Path:
# configure [['terminal', 't']]
(config)# qos parameters <WORD>
(config-qos)# bandwidth <NUMBER>
Description: The LDAP base DN for user lookup in the LDAP directory tree
Syntax:
|
<WORD> |
user lookup in LDAP directory tree (Max Size 127) |
Command Mode: ldap-server host : LDAP server DNS name or IP address
Command Path:
# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# basedn <WORD>
Description: Bash shell for unix commands
Command Mode: exec : Exec Mode
Command Path:
# bash
Description: Enable Enforced BD Flag
Syntax:
|
add |
BD Enforce Exception ip |
|
ip |
ip |
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']]
(config)# bd-enf-exp-ip add <ip>
Description: Enable Enforced BD Flag
Syntax:
|
enable |
Enable BD Enforcing |
Command Mode: vrf : Configuration for vrf
Command Path:
# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# bd-enforce enable
Description: Enable Bidirectional Forwarding Detection
Syntax:
|
enable |
Enable BFD |
Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# bfd enable
Description: Enable Bidirectional Forwarding Detection
Syntax:
|
enable |
Enable BFD |
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# bfd enable
Description: Enable Bidirectional Forwarding Detection
Syntax:
|
enable |
Enable BFD |
Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# bfd enable
Description: Enable Bidirectional Forwarding Detection
Syntax:
|
enable |
Enable BFD |
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# bfd enable
Description: Configure BFD authentication
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
keyed-sha1 |
Configure Keyed SHA1 authentication |
|
keyid |
Configure authentication key ID |
|
<keyid> |
Authentication key ID. Number range from=1 to=255 |
|
key |
Configure shared authentication key |
|
WORD |
Shared authentication key (Max Size 20) |
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>
Description: Configure BFD authentication
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
keyed-sha1 |
Configure Keyed SHA1 authentication |
|
keyid |
Configure authentication key ID |
|
<keyid> |
Authentication key ID. Number range from=1 to=255 |
|
key |
Configure shared authentication key |
|
WORD |
Shared authentication key (Max Size 20) |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>
Description: Configure BFD authentication
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
keyed-sha1 |
Configure Keyed SHA1 authentication |
|
keyid |
Configure authentication key ID |
|
<keyid> |
Authentication key ID. Number range from=1 to=255 |
|
key |
Configure shared authentication key |
|
WORD |
Shared authentication key (Max Size 20) |
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>
Description: Configure BFD authentication
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
keyed-sha1 |
Configure Keyed SHA1 authentication |
|
keyid |
Configure authentication key ID |
|
<keyid> |
Authentication key ID. Number range from=1 to=255 |
|
key |
Configure shared authentication key |
|
WORD |
Shared authentication key (Max Size 20) |
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>
Description: Configure BFD authentication
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
keyed-sha1 |
Configure Keyed SHA1 authentication |
|
keyid |
Configure authentication key ID |
|
<keyid> |
Authentication key ID. Number range from=1 to=255 |
|
key |
Configure shared authentication key |
|
WORD |
Shared authentication key (Max Size 20) |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>
Description: Configure BFD authentication
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
keyed-sha1 |
Configure Keyed SHA1 authentication |
|
keyid |
Configure authentication key ID |
|
<keyid> |
Authentication key ID. Number range from=1 to=255 |
|
key |
Configure shared authentication key |
|
WORD |
Shared authentication key (Max Size 20) |
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>
Description: Inherit BFD interface template policy
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
interface-policy |
Associate the interface with a BFD interface policy |
|
WORD |
Policy name |
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>
Description: Inherit BFD interface template policy
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
interface-policy |
Associate the interface with a BFD interface policy |
|
WORD |
Policy name |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>
Description: Inherit BFD interface template policy
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
interface-policy |
Associate the interface with a BFD interface policy |
|
WORD |
Policy name |
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>
Description: Inherit BFD interface template policy
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
interface-policy |
Associate the interface with a BFD interface policy |
|
WORD |
Policy name |
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>
Description: Inherit BFD interface template policy
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
interface-policy |
Associate the interface with a BFD interface policy |
|
WORD |
Policy name |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>
Description: Inherit BFD interface template policy
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
interface-policy |
Associate the interface with a BFD interface policy |
|
WORD |
Policy name |
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>
Description: Enable BFD Tenant Mode
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
mode |
Mode |
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 tenant mode
Description: Enable BFD Tenant Mode
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
mode |
Mode |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 tenant mode
Description: Enable BFD Tenant Mode
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
mode |
Mode |
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# bfd ip|ipv6 tenant mode
Description: Enable BFD Tenant Mode
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
mode |
Mode |
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 tenant mode
Description: Enable BFD Tenant Mode
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
mode |
Mode |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 tenant mode
Description: Enable BFD Tenant Mode
Syntax:
|
ip |
IPv4 |
|
ipv6 |
IPv6 |
|
mode |
Mode |
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# bfd ip|ipv6 tenant mode
Description: Border Gateway Protocol (BGP)
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']]
(config)# bgp-fabric
Description: Border Gateway Protocol (BGP)
Syntax:
|
fabric |
Fabric BGP configuration |
Command Mode: pod : Pod configuration mode
Command Path:
# configure [['terminal', 't']]
(config)# pod <NUMBER>
(config-pod)# bgp fabric
Description: BGP EVPN Peering Profile
Syntax:
|
evpn |
BGP EVPN Peering Profile |
|
peering |
BGP EVPN Peering Profile |
|
type |
(Optional) BGP EVPN Peering type |
|
password |
(Optional) BGP EVPN Peering Password |
Command Mode: fabric-external : Intrasite/Intersite Connectivity Profile
Command Path:
# configure [['terminal', 't']]
(config)# fabric-external <NUMBER>
(config-fabric-external)# bgp evpn peering [type <type>] [password <password>]
Description: BGP EVPN Peering Profile
Syntax:
|
evpn |
BGP EVPN Peering Profile |
|
peering |
BGP EVPN Peering Profile |
|
type |
(Optional) BGP EVPN Peering type |
|
password |
(Optional) BGP EVPN Peering Password |
Command Mode: pod : Pod Profile
Command Path:
# configure [['terminal', 't']]
(config)# fabric-external <NUMBER>
(config-fabric-external)# pod <NUMBER>
(config-fabric-external-pod)# bgp evpn peering [type <type>] [password <password>]
Description: The LDAP bind DN for user lookup in the LDAP directory tree
Syntax:
|
<WORD> |
user lookup in LDAP directory tree (Max Size 127) |
Command Mode: ldap-server host : LDAP server DNS name or IP address
Command Path:
# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# binddn <WORD>
Description: Enable BPDU filter for extended chassis ports
Command Mode: spanning-tree : STP MST configuration mode
Command Path:
# configure [['terminal', 't']]
(config)# spanning-tree mst configuration
(config-stp)# bpdu-filter
Description: Configure breakout ports
Syntax:
|
<breakout-map> |
Breakout Map |
Command Mode: leaf-interface-group : Configure Leaf Interface Group
Command Path:
# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# breakout <breakout-map>
Description: Configure breakout ports
Syntax:
|
<breakout-map> |
Breakout Map |
Command Mode: leaf-interface-group : Configure Leaf Interface Group
Command Path:
# configure [['terminal', 't']]
(config)# fabric-internal
(config-fabric-internal)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# breakout <breakout-map>
Description: Configure breakout ports
Syntax:
|
<breakout-map> |
Breakout Map |
Command Mode: spine-interface-group : Configure Spine Interface Group
Command Path:
# configure [['terminal', 't']]
(config)# fabric-internal
(config-fabric-internal)# spine-interface-profile <WORD>
(config-spine-if-profile)# spine-interface-group <WORD>
(config-spine-if-group)# breakout <breakout-map>
Description: Configure breakout ports
Syntax:
|
<breakout-map> |
Breakout Map |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# breakout <breakout-map>
Description: Configure breakout ports
Syntax:
|
<breakout-map> |
Breakout Map |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# breakout <breakout-map>
Description: Remove the global default-export route-profile
Command Mode: route-map : Create route-map or enter route-map command mode
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# bridge-domain-match
Description: Remove the global default-export route-profile
Command Mode: route-map : Create route-map or enter route-map command mode
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# bridge-domain-match
Description: Configuration for bridge-domain
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: tenant : Tenant configuration mode
Command Path:
# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
Description: Bind the EPG to a bridge-domain
Syntax:
|
member |
Bind the EPG to a bridge-domain |
|
WORD |
bridge-domain to associate (Max Size 64) |
Command Mode: epg : AEPg configuration mode
Command Path:
# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# bridge-domain member <WORD>
Description: Bind the EPG to a bridge-domain
Syntax:
|
WORD |
bridge domain associated with epg suggestion use "inb" |
Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband
Command Path:
# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# bridge-domain <WORD>
Description: Bind the EPG to a bridge-domain
Syntax:
|
member |
Bind the EPG to a bridge-domain |
|
WORD |
bridge-domain to associate (Max Size 64) |
Command Mode: external-l2 : L2 external EPG creation/configuration
Command Path:
# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# bridge-domain member <WORD>
Description: Configure Bridge Domain for a L4-L7 Graph Connector.
Syntax:
|
tenant |
Tenant in which the bridge domain is available |
|
<tenant> |
Tenant in which the bridge domain is available |
|
name |
Bridge domain name |
|
<name> |
Name of bd |
Command Mode: connector : Configure Connector for a Service Node
Command Path:
# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>] [svcredir <Service Redirection>] [service-type <Service Type>]
(config-service)# connector <WORD> [cluster-interface <WORD>]
(config-connector)# bridge-domain tenant <tenant> name <name>
Description: Set burst-rate (Byte Per Second)
Syntax:
|
arg |
. Number range from=10 to=549755813760 |
Command Mode: policy-protocol : Create policy protocol
Command Path:
# configure [['terminal', 't']]
(config)# policy-map type control-plane-if <WORD>
(config-pmap-copp-if)# policy-protocol <WORD>
(config-pmap-copp-if)# burst-rate <>
Feedback