lldp receive|transmit|both|default
Description: Configure Interface LLDP parameters on DVS uplink ports
Syntax:
receive
|
Enable LLDP reception
|
transmit
|
Enable LLDP transmission
|
both
|
Enable LLDP in both directions
|
default
|
Remove LLDP override policy
|
Command Mode: configure-dvs : Configure a VMWare Domain as DVS type
Command Path:
# configure [['terminal', 't']]
(config)# vmware-domain <WORD> [delimiter <WORD>] [access-mode <access-mode>] [number-of-uplinks <number-of-uplinks>]
(config-vmware)# configure-dvs
(config-vmware-dvs)# lldp receive|transmit|both|default
lldp receive|transmit|both|default
Description: Configure Interface LLDP parameters on AVS/AVE uplink ports
Syntax:
receive
|
Enable LLDP reception
|
transmit
|
Enable LLDP transmission
|
both
|
Enable LLDP in both directions
|
default
|
Remove LLDP override policy
|
Command Mode: configure-avs : Configure a VMWare Domain as AVS (N1K) type
Command Path:
# configure [['terminal', 't']]
(config)# vmware-domain <WORD> [delimiter <WORD>] [access-mode <access-mode>] [number-of-uplinks <number-of-uplinks>]
(config-vmware)# configure-avs
(config-vmware-avs)# lldp receive|transmit|both|default
lldp receive|transmit|both|default
Description: Configure Interface LLDP parameters on AVS/AVE uplink ports
Syntax:
receive
|
Enable LLDP reception
|
transmit
|
Enable LLDP transmission
|
both
|
Enable LLDP in both directions
|
default
|
Remove LLDP override policy
|
Command Mode: configure-ave : Configure a Cisco AVE domain
Command Path:
# configure [['terminal', 't']]
(config)# vmware-domain <WORD> [delimiter <WORD>] [access-mode <access-mode>] [number-of-uplinks <number-of-uplinks>]
(config-vmware)# configure-ave
(config-vmware-ave)# lldp receive|transmit|both|default
lldp receive|transmit
Description: Configure Interface LLDP parameters
Syntax:
receive
|
Enable LLDP reception on interface
|
transmit
|
Enable LLDP transmission on interface
|
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# lldp receive|transmit
lldp receive|transmit
Description: Configure Interface LLDP parameters
Syntax:
receive
|
Enable LLDP reception on interface
|
transmit
|
Enable LLDP transmission on interface
|
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-po-ch-if)# lldp receive|transmit
lldp receive|transmit
Description: Configure Interface LLDP parameters
Syntax:
receive
|
Enable LLDP reception on interface
|
transmit
|
Enable LLDP transmission on interface
|
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# lldp receive|transmit
lldp receive|transmit
Description: Configure Interface LLDP parameters
Syntax:
receive
|
Enable LLDP reception on interface
|
transmit
|
Enable LLDP transmission on interface
|
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lldp receive|transmit
lldp receive|transmit
Description: Configure Interface LLDP parameters
Syntax:
receive
|
Enable LLDP reception on interface
|
transmit
|
Enable LLDP transmission on interface
|
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# lldp receive|transmit
lldp receive|transmit
Description: Configure Interface LLDP parameters
Syntax:
receive
|
Enable LLDP reception on interface
|
transmit
|
Enable LLDP transmission on interface
|
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lldp receive|transmit
lldp receive|transmit
Description: Configure Interface LLDP parameters
Syntax:
receive
|
Enable LLDP reception on interface
|
transmit
|
Enable LLDP transmission on interface
|
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lldp receive|transmit