ui-idle-timeout-seconds <NUMBER>

Description: Set maximum GUI idle duration before requiring login refresh

Syntax:

Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.

Command Path:

# configure [['terminal', 't']]
(config)# crypto webtoken
(config-webtoken)# ui-idle-timeout-seconds <NUMBER>

unicast routing

Description: Instruct the fabric to route based on IP

Syntax:

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# unicast routing

update-source ethernet <interfaceRange>

Description: Source Ethernet Interface

Syntax:

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# update-source ethernet <interfaceRange>

update-source ethernet <interfaceRange>

Description: Source Ethernet Interface

Syntax:

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# update-source ethernet <interfaceRange>

update-source loopback <A.B.C.D>

Description: Source Loopback Interface

Syntax:

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# update-source loopback <A.B.C.D>

update-source loopback <A.B.C.D>

Description: Source Loopback Interface

Syntax:

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# update-source loopback <A.B.C.D>

update-source vlan <vlan>

Description: Source Vlan Interface

Syntax:

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# update-source vlan <vlan>

update-source vlan <vlan>

Description: Source Vlan Interface

Syntax:

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# router bgp <fabric-ASN>
(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# update-source vlan <vlan>

usage <resource-type>

Description: Show deployment usage

Syntax:

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# usage <resource-type>

use-bia

Description: HSRP uses interfaces burned in address

Command Mode: template hsrp interface-policy : Configure HSRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template hsrp interface-policy <WORD> tenant <WORD>
(config-template-hsrp-if-pol)# use-bia

use-bia

Description: HSRP uses interfaces burned in address

Command Mode: template hsrp interface-policy : Configure HSRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# template hsrp interface-policy <WORD> tenant <WORD>
(config-template-hsrp-if-pol)# use-bia

use-keyring <keyring-name>

Description: Use specified keyring for the HTTPS Server SSL certificate

Syntax:

Command Mode: https : HTTPS communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# use-keyring <keyring-name>

use-vrf <arg>

Description: Configure the management vrf for dns servers

Syntax:

Command Mode: dns : Configure default dns policy

Command Path:

# configure [['terminal', 't']]
(config)# dns
(config-dns)# use-vrf <>

user <WORD>

Description: Set the remote path user name and password

Syntax:

Command Mode: remote : Remote path configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# remote path <WORD>
(config-remote)# user <WORD>

user <user-name>

Description: User Name

Syntax:

Command Mode: integrations-mgr : Integrations Manager

Command Path:

# configure [['terminal', 't']]
(config)# integrations-group <WORD>
(config-integrations-group)# integrations-mgr <WORD> <type>
(config-integrations-mgr)# user <user-name>

username <WORD>

Description: Create a locally-authenticated user account

Syntax:

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>

username <WORD>

Description: Configure a user account for the vCenter

Syntax:

Command Mode: vcenter : Configure a vCenter in the VMware domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD> [delimiter <WORD>] [access-mode <access-mode>]
(config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>]
(config-vmware-vc)# username <WORD>

username <WORD>

Description: Configure a user account for the RHEV controller

Syntax:

Command Mode: rhev : Configure an RHEV controller in the Redhat domain

Command Path:

# configure [['terminal', 't']]
(config)# rhev-domain <WORD> [delimiter <WORD>]
(config-redhat)# rhev <> datacenter <WORD>
(config-redhat-rhev)# username <WORD>