port <NUMBER>
Description: LDAP server port for authentication
Syntax:
|
<1-65535>
|
Port number. Number range from=1 to=65535
|
Command Mode: ldap-server host : LDAP server DNS name or IP address
Command Path:
# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# port <NUMBER>
port <NUMBER>
Description: RADIUS server port for authentication
Syntax:
|
<1-65535>
|
RADIUS server port for authentication. Number range from=1 to=65535
|
Command Mode: radius-server host : RADIUS server's DNS name or its IP address
Command Path:
# configure [['terminal', 't']]
(config)# radius-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# port <NUMBER>
port <NUMBER>
Description: RSA server port for authentication
Syntax:
|
<1-65535>
|
RSA server port for authentication. Number range from=1 to=65535
|
Command Mode: rsa-server host : RSA server's DNS name or its IP address
Command Path:
# configure [['terminal', 't']]
(config)# rsa-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# port <NUMBER>
port <NUMBER>
Description: TACACS server port for authentication
Syntax:
|
<1-65535>
|
RADIUS server port for authentication. Number range from=1 to=65535
|
Command Mode: tacacs-server host : TACACS+ server's DNS name or its IP address
Command Path:
# configure [['terminal', 't']]
(config)# tacacs-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# port <NUMBER>
port <NUMBER>
Description: Set the port used for SSH communication service.
Syntax:
|
<0-65535>
|
Set the port used for SSH communication service.. Number range from=0 to=65535
|
Command Mode: ssh-service : SSH communication policy group
Command Path:
# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# ssh-service
(config-ssh-service)# port <NUMBER>
port <NUMBER>
Description: Set the port used for TELNET communication service.
Syntax:
|
<0-65535>
|
Set the port used for TELNET communication service.. Number range from=0 to=65535
|
Command Mode: telnet : TELNET communication policy group
Command Path:
# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# telnet
(config-telnet)# port <NUMBER>
port <NUMBER>
Description: Set the port used for HTTP communication service.
Syntax:
|
<1-65535>
|
Set the port used for HTTP communication service.. Number range from=1 to=65535
|
Command Mode: http : HTTP communication policy group
Command Path:
# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# http
(config-http)# port <NUMBER>
port <NUMBER>
Description: Set the port used for HTTPS communication service
Syntax:
|
<1-65535>
|
Set the port used for HTTPS communication service. Number range from=1 to=65535
|
Command Mode: https : HTTPS communication policy group
Command Path:
# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# port <NUMBER>
port <arg>
Description: Port Number for TWAMP Server
Syntax:
|
arg
|
Configure Port Number for TWAMP Server. Number range from=1 to=65535
|
Command Mode: template twamp server-policy : Configure twamp server policy
Command Path:
# configure [['terminal', 't']]
(config)# template twamp server-policy <WORD>
(config-twamp-server-policy)# port <>
port <from> <to> type fc
Description: Configure Port Conversion
Syntax:
|
from
|
From port number. Number range from=1 to=128
|
|
to
|
To port number. Number range from=1 to=128
|
|
type
|
Select port type
|
|
fc
|
Fiber Channel
|
Command Mode: slot : Specify Slot Number
Command Path:
# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# slot <card>
(config-leaf-slot)# port <from> <to> type fc
port <from> <to> type fc
Description: Configure Port Conversion
Syntax:
|
from
|
From port number. Number range from=1 to=128
|
|
to
|
To port number. Number range from=1 to=128
|
|
type
|
Select port type
|
|
fc
|
Fiber Channel
|
Command Mode: slot : Specify Slot Number
Command Path:
# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# slot <card>
(config-leaf-slot)# port <from> <to> type fc
Feedback