New, Changed, and Deprecated Commands

New, Changed, and Deprecated Commands in Cisco APIC Release 4.1(1)

The following sections describe changes in the APIC NXOS-style CLI since Release 4.0(1) .

New Commands

The following commands are added in this release.

  • cif cluster <WORD> device <WORD> device-interface <WORD>

  • cli-only-mode-enable

  • deltape <21-40>

  • dest-type <WORD>

  • destination interface port-channel <port-channel> leaf <leaf Id> [mtu <mtu>]

  • device-address <device-address>

  • drop enable

  • encap-sync <encapSync>

  • endpoint ip <A.B.C.D/LEN> epnlb mode <WORD> group <IP>

  • endpoint ip <A.B.C.D/LEN> epnlb mode <WORD> mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

  • endpoint ipv6 <A:B::C:D/LEN> epnlb mode <WORD> group <IP>

  • endtime <LINE>

  • errdisable recovery cause storm-control

  • filter [ipproto <WORD>] [srcaddr <srcAddr>] [dstaddr <dstAddr>] [srcportfrom <WORD>] [srcportto <WORD>] [dstportfrom <WORD>] [dstportto <NUMBER>]

  • filter-group <WORD>

  • flash-config <WORD>

  • flood-in-encapsulation

  • gbb <4-15>

  • inherit ip arp <WORD>

  • inherit redirect-health-group <WORD>

  • integrations-group <WORD>

  • integrations-mgr <WORD> <type>

  • ip arp garp-adj-enable

  • ip load-sharing address source_destination gtpu

  • ip router eigrp authentication enable

  • ip router eigrp authentication keychain-policy <WORD>

  • ipsla-monpol <ipsla-monpol>

  • ipv6 mld snooping

  • ipv6 mld snooping fast-leave

  • ipv6 mld snooping last-member-query-interval <NUMBER>

  • ipv6 mld snooping policy <WORD>

  • ipv6 mld snooping querier

  • ipv6 mld snooping query-interval <NUMBER>

  • ipv6 mld snooping query-max-response-time <NUMBER>

  • ipv6 mld snooping startup-query-count <NUMBER>

  • ipv6 mld snooping startup-query-interval <NUMBER>

  • ipv6 nd unsolicit-na-glean

  • ipv6 router eigrp authentication enable

  • ipv6 router eigrp authentication keychain-policy <WORD>

  • ipv6-l3-unknown-multicast <WORD>

  • key-policy <NUMBER>

  • keychain-policy <WORD>

  • l1l2redir-dest <WORD>

  • millisecond

  • monitor access filter-group <WORD>

  • nicprof-vlan-preserve <nicProfVlanPrsv>

  • nlb static-group E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

  • nlb static-group E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE leaf <WORD> interface ethernet ethernet <slot>/<port> vlan <VLAN>

  • nlb static-group E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE leaf <WORD> interface port-channel <WORD> [fex <NUMBER>] vlan <VLAN>

  • nlb static-group E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>] vlan <VLAN>

  • passwd-auth-enable

  • pecycles <3000-10000>

  • presharedkey

  • protect-vm-group <vm-group>

  • readerr <500-2000>

  • redirect-health-group <WORD>

  • sdwan-sla <WORD>

  • show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD ipv6multicast

  • show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD ipv6multicast

  • show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD ipv6multicast

  • show firmware upgrade scheduler-status

  • show firmware upgrade scheduler-status switch-group <WORD>

  • show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD ipv6multicast

  • show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD ipv6multicast

  • show tenant WORD vrf WORD ipv6multicast

  • show track-ipsla

  • show track-objects

  • source global-drop switch <101-4000>

  • starttime <LINE>

  • storm-control action <>

  • storm-control soak-instance-count <>

  • sw-mgr <sw-mgr>

  • switchport speed <interfaceSpeed> max <AutoMaxSpeed>

  • template ip arp policy <WORD>

  • template ip arp policy <WORD> tenant <WORD>

  • template ipv6 mld snooping policy <WORD>

  • track-list <WORD> <tracklist-type> [percentage-up <percentage-up>] [percentage-down <percentage-down>] [weight-up <weight-up>] [weight-down <weight-down>]

  • track-member <WORD> [dst-IpAddr <dst-IpAddr>] [l3-out <l3-out>]

  • track-member <track-member> [weight <weight>]

  • trigger techsupport controllers include-upgrade-logs [remotename <remote-path>] application [appName <app-name>] [vendorName <vendor-name>] [remotename <remote-path>]

  • troubleshoot node session <session_name> monitor destination apic srcipprefix <sip/m> [analyser <aip>] [pref-erspan-version <preferspanver>] [erspan-id <id>] [drop <drop>]

  • troubleshoot node session <session_name> monitor destination prefdestgroup <destgroup_name> [drop <drop>]

  • troubleshoot node session <session_name> monitor destination tenant <tn_name> application <ap_name> epg <epg_name> destip <dip> srcipprefix <sip/m> [pref-erspan-version <preferspanver>] [erspan-id <id>] [mtu <NUMBER>] [drop <drop>]

  • troubleshoot node session <session_name> nodeid <nodeId>

  • troubleshoot node session <session_name> nodeid <nodeId> interface

  • troubleshoot node session <session_name> nodeid <nodeId> interface ethernet ethernet <slot>/<port>

Changed Commands

The following commands are modified in this release.

  • OLD: address-family ipv4|ipv6|l2vpn unicast|evpn

  • NEW: address-family ipv4|ipv6|l2vpn unicast|multicast|evpn

  • OLD: filter tenant <tenant_name> l3out <L3Out name> address <IPv4 or IPv6 prefix format> [vlan <vlan>]

  • NEW: filter tenant <tenant_name> l3out <L3Out name> vlan <Vlan of the interface>

  • OLD: ip route <A.B.C.D/LEN> <ipAddress|null> <ZeroorPref> <BfdorPref>

  • NEW: ip route <A.B.C.D/LEN> <ipAddress|null> <ZeroorPref> <BfdorPref> [ip-trackList <ip-trackList>] [nh-trackList <nh-trackList>]

  • OLD: ipv6 address <A:B::C:D/LEN> [scope <scope>] [preferred] [suppress-nd] [eui64]

  • NEW: ipv6 address <A:B::C:D/LEN> [scope <scope>] [preferred] [suppress-nd] [eui64] [snooping-querier]

  • OLD: porttrack minlinks <0-18>

  • NEW: porttrack minlinks <0-48>

  • OLD: set server-timeout <4-65535>

  • NEW: set server-timeout <2-65535>

  • OLD: set supp-timeout <4-65535>

  • NEW: set supp-timeout <2-65535>

  • OLD: set tx-period <4-65535>

  • NEW: set tx-period <2-65535>

  • OLD: show version

  • NEW: show versions

  • OLD: sla-type <WORD>

  • NEW: sla-type <WORD> [sla-port <NUMBER>]

  • OLD: switchport port-authentication server-timeout <4-65535>

  • NEW: switchport port-authentication server-timeout <2-65535>

  • OLD: switchport port-authentication supp-timeout <4-65535>

  • NEW: switchport port-authentication supp-timeout <2-65535>

  • OLD: switchport port-authentication tx-period <4-65535>

  • NEW: switchport port-authentication tx-period <2-65535>

  • OLD: trigger-inventory <trigger-inventory>

  • NEW: trigger-inventory

Deprecated Commands

The following commands are removed in this release.

  • ave-hbinterval <WORD>

  • external-switch-node <node-name>

  • flood-on-encapsulation

  • managed-nic-prof <externalId> <vmm-domain>

  • management-uri <management-uri>

  • password <password>

  • show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

  • show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

  • show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

  • show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

  • show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

  • show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

  • show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

  • show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

  • show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

  • show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

  • show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

  • show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

  • system external-switch-group <group-name>

New, Changed, and Deprecated Commands in Cisco APIC Release 4.1(2)

The following sections describe changes in the APIC NXOS-style CLI since Release 4.1(1) .

New Commands

The following commands are added in this release.

  • sr-upgrade

  • sr-version <version>

Changed Commands

No commands are modified in this release.

Deprecated Commands

The following commands are removed in this release.

  • catalog-version <version>

  • errdisable recovery cause storm-control