Q Commands

qinq-static-endpoint

qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure Silent Host behind an EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

outer-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

inner-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

A1.B1.C1.D1,...,An.Bn.Cn.Dn

(Optional) List of IP addresses in format i.i.i.i

A1:B1::C1:D1,..,An:Bn::Cn:Dn

(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path: 


# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure silent Host behind an EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

outer-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

inner-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

A1.B1.C1.D1,...,An.Bn.Cn.Dn

(Optional) List of IP addresses in format i.i.i.i

A1:B1::C1:D1,..,An:Bn::Cn:Dn

(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: interface port-channel : Port Channel interface

Command Path: 


# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure Silent Host behind an EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

outer-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

inner-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

A1.B1.C1.D1,...,An.Bn.Cn.Dn

(Optional) List of IP addresses in format i.i.i.i

A1:B1::C1:D1,..,An:Bn::Cn:Dn

(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path: 


# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface ethernet <ifRange>
(config-leaf-if)# qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure silent Host behind an EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

outer-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

inner-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

A1.B1.C1.D1,...,An.Bn.Cn.Dn

(Optional) List of IP addresses in format i.i.i.i

A1:B1::C1:D1,..,An:Bn::Cn:Dn

(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: interface port-channel : Port Channel interface

Command Path: 


# configure [['terminal', 't']]
(config)# spine <101-4000>
(config-spine)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure silent Host behind a EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

outer-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

inner-vlan

Outer Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

A1.B1.C1.D1,...,An.Bn.Cn.Dn

(Optional) List of IP addresses in format i.i.i.i

A1:B1::C1:D1,..,An:Bn::Cn:Dn

(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: interface : Provide VPC Name

Command Path: 


# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# qinq-static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE outer-vlan <NUMBER> inner-vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

qos

qos dscp-map <WORD>

Description: Set DSCP Class translation values

Syntax:

dscp-map

DSCP map

WORD

DSCP Translation Policy name (Max Size 64)

Command Mode: tenant : Tenant configuration mode

Command Path: 


# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# qos dscp-map <WORD>

qos parameters

qos parameters <WORD>

Description: Configure the global QOS policies

Syntax:

WORD

Qos Level

Command Mode: configure : Configuration Mode

Command Path: 


# configure [['terminal', 't']]
(config)# qos parameters <WORD>

qos preserve

qos preserve cos

Description: Preserve incoming qos value in the frame

Syntax:

cos

IEEE 802.1P class of service.

Command Mode: configure : Configuration Mode

Command Path: 


# configure [['terminal', 't']]
(config)# qos preserve cos

query-profile

query-profile

Description: Configure Query profile Parameters

Command Mode: callhome : Callhome common policy configuration mode

Command Path: 


# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# query-profile

query-profile

Description: Configure Query profile Parameters

Command Mode: smartcallhome : Smart Callhome common policy configuration mode

Command Path: 


# configure [['terminal', 't']]
(config)# smartcallhome common
(config-smartcallhome)# query-profile

query

query <WORD> type dn|class <dn/classname>

Description: Configure Query profile Parameters

Syntax:

WORD

Query name (Max Size 16)

type

type

dn

Dn

class

Class

<dn/classname>

The class or DN name

Command Mode: query-profile : Configure Query profile Parameters

Command Path: 


# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# query-profile
(config-callhome-queryprof)# query <WORD> type dn|class <dn/classname>

query <WORD> type dn|class <dn/classname>

Description: Configure Query profile Parameters

Syntax:

WORD

Query name (Max Size 16)

type

type

dn

Dn

class

Class

<dn/classname>

The class or DN name

Command Mode: query-profile : Configure Query profile Parameters

Command Path: 


# configure [['terminal', 't']]
(config)# smartcallhome common
(config-smartcallhome)# query-profile
(config-callhome-queryprof)# query <WORD> type dn|class <dn/classname>

queue control

queue control dynamic

Description: Set the queueing control method

Syntax:

dynamic

Dynamic allocation of queue resources

Command Mode: qos parameters : Configure the global QOS policies

Command Path: 


# configure [['terminal', 't']]
(config)# qos parameters <WORD>
(config-qos)# queue control dynamic

queue limit

queue limit <1500-9216>

Description: Set the limit for the policing queue

Syntax:

<1500-9216>

Queue limit size

Command Mode: qos parameters : Configure the global QOS policies

Command Path: 


# configure [['terminal', 't']]
(config)# qos parameters <WORD>
(config-qos)# queue limit <1500-9216>

quota

quota <WORD> max <0-4294967295> [exceed-action <WORD>] [scope <WORD>] [tenant <WORD>] [bridge-domain <WORD>] [application <WORD>] [epg <WORD>]

Description: Quota Settings

Syntax:

WORD

Name of class to place under quota (Max Size None)

max

Maximum value above which exceed action is taken

<0-4294967295>

Maximum value above which exceed action is taken

WORD

(Optional) Exceed Action to be taken when max is exceeded

WORD

(Optional) Subtree where the quota is calculated (Max Size None)

WORD

(Optional) Tenant for the quota (Max Size 63)

WORD

(Optional) Name of the bridge-domain (Max Size 64)

WORD

(Optional) Application name (Max Size 64)

WORD

(Optional) Application EPG name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path: 


# configure [['terminal', 't']]
(config)# quota <WORD> max <0-4294967295> [exceed-action <WORD>] [scope <WORD>] [tenant <WORD>] [bridge-domain <WORD>] [application <WORD>] [epg <WORD>]