Enabling PIM and IGMP
The Enable PIM and IGMP page lets you enable or disable Internet Group Management Protocol (IGMP) and Protocol Independent Multicast (PIM) on all interfaces on the security appliance. IGMP is used to learn whether members of a group are present on directly attached subnets. Hosts join multicast groups by sending IGMP report messages. PIM is used to maintain forwarding tables to forward multicast datagrams.
When Enable PIM and IGMP is checked on this page, PIM and IGMP are enabled on all interfaces on the security appliance. Deselect the option to disable PIM and IGMP on all interfaces.
You can disable PIM and IGMP on a per-interface basis; see IGMP Page - Protocol Tab and PIM Page - Protocol Tab for more information.
(Device view) Selectfrom the Device Policy selector.
(Policy view) Selectfrom the Policy Type selector. Select an existing policy from the Shared Policy selector, or create a new one.