Note: The ASA 5506H-X does not support the ASA FirePOWER module in Version 9.10 and later. For information about using the module with earlier versions, see https://cisco.com/go/asafp-quick.
Note: The ASA 5506H-X does not support Firepower Threat Defense operating system Version 6.3 and later. For information about reimaging to FTD 6.2 and earlier, see https://cisco.com/go/asa-ftd-reimage.
3. Connect your browser to ASDM on one of the inside interfaces, GigabitEthernet 1/2 to 1/4: https://192.168.1.1/admin. Leave the username and password empty. Note: Change your privileged (enable) mode password after you log in on the Configuration > Device Setup > Device Name/Password page.