Note |
Explore the Content Hub, the all new portal that offers an enhanced product documentation experience.
Get started with the Content Hub at content.cisco.com to craft a personalized documentation experience. Do provide feedback about your experience with the Content Hub. |
What's New in Cisco IOS XR Release 7.2.1
Software
Fault Profiles
The Fault Profiling feature enables you to create a unique fault profile for faults on the system. Each fault profile can contain one or more faults with user-defined severities.
See Fault Profiles.
Commands introduced:
Caveats
Open Caveats
The following table lists the open caveats for NCS 1002:
Caveat ID Number |
Description |
---|---|
PM data must be shown only for one lane in case of FR pluggable. |
Bug Search Tool
Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.
Supported Packages and System Requirements
Release 7.2.1 Packages
Feature Set |
Filename |
Description |
Composite Package |
||
Cisco IOS XR Core Bundle + Manageability Package |
Contains required core packages, including operating system, Admin, Base, Forwarding, SNMP Agent, FPD, and Alarm Correlation and Netconf-yang, Telemetry, Extensible Markup Language (XML) Parser, HTTP server packages. |
|
Individually Installable Optional Packages |
||
Cisco IOS XR Security Package |
ncs1k-k9sec-4.1.0.0-r721.x86_64.rpm (part of ncs1k-iosxr-px-k9-7.2.1.tar) |
Support for Encryption, Decryption, IP Security (IPsec), Secure Shell (SSH), Secure Socket Layer (SSL), and Public-key infrastructure (PKI). |
See Install Packages.
System Requirements
Memory Configuration
At least 16 GB RAM
Determine Software Version
Log in to NCS 1002 and enter the show version command:
RP/0/RP0/CPU0:ios#show version
Thu Aug 13 11:44:54.929 IST Cisco IOS XR Software, Version 7.2.1
Copyright (c) 2013-2020 by Cisco Systems, Inc.
Build Information:
Built By : gopalk2
Built On : Wed Aug 12 06:35:54 PDT 2020
Built Host : iox-lnx-020
Workspace : /auto/srcarchive13/prod/7.2.1/ncs1k/ws
Version : 7.2.1
Location : /opt/cisco/XR/packages/
Label : 7.2.1
cisco NCS-1002 () processor
System uptime is 33 minutes
Determine Firmware Support
Log in to NCS 1002 and enter the show hw-module fpd command:
RP/0/RP0/CPU0:ios#show hw-module fpd
Wed Aug 12 13:14:43.467 IST
FPD Versions
=================
Location Card type HWver FPD device ATR Status Running Programd
-----------------------------------------------------------------------------------
0/0 NCS1002-K9 1.2 CDSP_PORT_05 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_06 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_12 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_13 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_19 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_20 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_26 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_27 CURRENT 3.77 3.77
0/0 NCS1002-K9 2.0 CFP2_PORT_05 CURRENT 4.40 4.40
0/0 NCS1002-K9 2.1 CFP2_PORT_06 CURRENT 5.52 5.52
0/0 NCS1002-K9 2.1 CFP2_PORT_12 CURRENT 5.52 5.52
0/0 NCS1002-K9 0.0 CFP2_PORT_13 CURRENT 1.01 1.01
0/0 NCS1002-K9 2.1 CFP2_PORT_19 CURRENT 5.52 5.52
0/0 NCS1002-K9 2.1 CFP2_PORT_20 CURRENT 5.52 5.52
0/0 NCS1002-K9 4.2 CFP2_PORT_26 CURRENT 3.20 3.20
0/0 NCS1002-K9 2.1 CFP2_PORT_27 CURRENT 5.52 5.52
0/0 NCS1002-K9 0.1 CTRL_BKP_LOW B CURRENT 2.23
0/0 NCS1002-K9 0.1 CTRL_BKP_UP B CURRENT 2.23
0/0 NCS1002-K9 0.1 CTRL_FPGA_LOW CURRENT 2.23 2.23
0/0 NCS1002-K9 0.1 CTRL_FPGA_UP CURRENT 2.23 2.23
0/RP0 NCS1K-CNTLR 0.1 BIOS_Backup BS CURRENT 15.10
0/RP0 NCS1K-CNTLR 0.1 BIOS_Primary S CURRENT 15.10 15.10
0/RP0 NCS1K-CNTLR 0.1 Daisy_Duke_BKP BS CURRENT 0.20
0/RP0 NCS1K-CNTLR 0.1 Daisy_Duke_FPGA S CURRENT 0.20 0.20
0/PM0 NCS1K-2KW-AC 0.0 PO-PriMCU CURRENT 4.00 4.00
0/PM1 NCS1K-2KW-AC 0.0 PO-PriMCU CURRENT
The above show output lists the hardware components that are supported in current release with their status. The status of the hardware must be CURRENT; Running and Programd version must be similar.
Other Important Information
Mandatory Upgrade Notes
Please read the following before upgrading the software to Release 7.2.1.
-
Disable auto FPD upgrade before upgrading the software from Release 6.3.x, Release 6.5.x, Release 7.0.1, and Release 7.1.1 to Release 7.2.1.
Supported MIBs
The following MIBs are supported in NCS 1002:
-
CISCO-CONFIG-MAN-MIB
-
CISCO-FLASH-MIB
-
CISCO-ENTITY-REDUNDANCY-MIB
-
CISCO-SYSTEM-MIB
-
CISCO-ENTITY-ASSET-MIB
-
EVENT-MIB
-
DISMAN-EXPRESSION-MIB
-
CISCO-FTP-CLIENT-MIB
-
NOTIFICATION-LOG-MIB
-
CISCO-RF-MIB
-
RADIUS-AUTH-CLIENT-MIB
-
RADIUS-ACC-CLIENT-MIB
-
IEEE8023-LAG-MIB
-
CISCO-TCP-MIB
-
UDP-MIB
-
CISCO-BULK-FILE-MIB
-
CISCO-CONTEXT-MAPPING-MIB
-
CISCO-OTN-IF-MIB
-
CISCO-ENHANCED-MEMPOOL-MIB
-
CISCO-PROCESS-MIB
-
CISCO-SYSLOG-MIB
-
ENTITY-MIB
-
CISCO-ENTITY-FRU-CONTROL-MIB
-
CISCO-IF-EXTENSION-MIB
-
RMON-MIB
-
CISCO-OPTICAL-MIB
-
CISCO-ENTITY-SENSOR-MIB
-
LLDP-MIB