- Preface
- Introduction
- Creating and Analyzing Networks
- Viewing Network Reports
- Editing a Project
- Modeled Network Examples
- GUI Information and Shortcuts
- Cards and Pluggables
- Troubleshooting
- Third-Party DWDM Wavelength Interface Model
- Configuring CTP to Run on a Server
- Pay As You Grow Licensing
- OSMINE Layout Rules
- Index
Cards and
Pluggables
This appendix provides a list of Supported Pluggables supported in CTP and the cards supported by NCS 2015.
The following table lists the cards supported by Cisco NCS 2015.
![]() Note | You must upgrade the cards supported in Cisco NCS 2015 M15 chassis to Release 10.5 or Release 10.5.2 before you use them on the M15 chassis. |
|
Interface Type |
Card |
Release |
|---|---|---|
|
Wavelengths Management Line Cards |
||
|
NCS2K-9-SMRxxFS |
R10.5 |
|
|
NCS2K-20-SMR-FS |
||
|
NCS2K-12-AD-CCOFS |
||
|
NCS2K-16-AD-CCOFS |
||
|
NCS2K-16-WXC-FS |
||
|
15454-80-WXC-C |
R10.5.2 |
|
|
15216-MD-40-ODD/EVEN/ID-50 |
||
|
15216-EF-40-ODD/EVEN |
||
|
Optical Amplifier Line Cards |
||
|
NCS2K-EDRA1-26/35C |
R10.5 |
|
|
NCS2K-EDRA2-26/35C |
||
|
15454-OPT-EDFA-17/24 |
||
|
15454-M-RAMAN-CTP |
||
|
15454-M-RAMAN-COP= |
||
|
15454-OPT-PRE |
R10.5.2 |
|
|
15454-OPT-BST |
||
|
15454-OPT-BST-E |
||
|
15454-OPT-AMP-C |
||
|
15454-OPT-AMP-17C |
||
|
Transponder/Muxponder Ancillary Cards |
||
|
NCS2K-200G-CK-C |
R10.5 |
|
|
NCS2K-100GS-CK-C |
||
|
NCS2K-MR-MXP-LIC |
||
|
NCS2K-100G-CK-C |
||
|
NCS2K-100ME-CKC |
||
|
15454-M-100G-LC |
||
|
15454-M-100-ME-LC |
||
|
15454-M-10X10G-LC |
||
|
15454-M-WSE-K9= |
||
|
15454-AR-MXP |
||
|
15454-AR-XPE |
||
|
15454-CFP-LC |
R10.5.2 |
|
|
15454-AR-XP= |
||
|
15454-OTU2-XP= |
||
|
15454-40E-MXP-C= |
||
|
15454-40E-TXP-C= |
||
|
15454-10E-L1-C |
||
|
15454-PSM |
||
|
15454-OSC-CSM |
||
|
400G-XP-LC |
R10.6.1 |
|

Feedback