PDF(38.6 KB) View with Adobe Reader on a variety of devices
ePub(66.9 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(66.8 KB) View on Kindle device or Kindle app on multiple devices
Updated:September 14, 2017
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes how to check iPhone or iPad for Jabber crash stacks.
Contributed by Md Hasan, Cisco TAC Engineers. Edited by Sumit Patel and Jasmeet Sandhu
Cisco recommends that you have knowledge of these topics:
Jabber for iPhone/iPad
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.
How to collect Jabber Crash Dump on Apple iPhone/iPad
Step 1. On iPhone/iPad, navigate to Settings > Privacy > Diagnostics & Usage > Diagnostic & Usage Data
Step 3.Verify if the present crash stacks match with Jabber crash timeframe.
Note: OS can terminiate Jabber due to memory pressure or low battery. If this occues, no Jabber crash are produced and only JetsamEvent-2017-xx-xx-xxxx files get generated by iOS
Caution: The storage for crash logs is limited by iOS system. If there are too many logs in Diagnostic & Usage Data, no new logs are generated. First clear the logs with these steps, then reproduce the issue again
Step 1. Plug the cable in the iPhone/iPad and connect to a laptop/desktop
Step 2. Open iTunes on desktop/laptop and select Sync
Step 3. After the iPhone/iPad has been plugged and synced with iTunes, the crash logs can be found in the locations dependant on the platform used