Product Specifications of the WAP581 Wireless-AC/N Dual Radio Access Point with 2.5GbE LAN
Available Languages
Objective
The WAP581 Wireless-AC/N Dual Radio Access Point with 2.5GbE LAN delivers secure and reliable wireless connectivity. It allows you to improve your Wi-Fi coverage and connectivity concurrent dual-band radio technology. Equipped with Gigabit Ethernet Local Area Network (LAN) interfaces with Power over Ethernet (PoE), the high-performance WAP581 Access Point facilitates flexible installation and reduces cabling costs.
To provide highly secure access to guests and other users, the WAP581 features a captive portal with multiple authentication options and the ability to configure rights, roles, and bandwidth.
This article shows the product specifications of the WAP581 Wireless-AC/N Dual Radio Access point. To learn more about the WAP581 Wireless AC/N Dual Radio Access Point with 2.5GbE LAN, click here.
Product Specifications
| Specifications |
Description |
| Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11b, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.11x, IEEE 802.11i, IEEE 802.11e, IEEE 802.11n, Wi-Fi Protected Setup (WPS) |
| Cabling type |
Category 5e or better |
| Antennas |
4 Internal Integrated Dipole antennas |
| Operating System |
Linux |
| Power |
PoE 802.3af/at (48v) 48v Voltage required |
Physical Interfaces
| Specifications |
Description |
| Ports |
2x network/power, 1x Ethernet 10BASE-T/1000BASE-TX 1x Ethernet 2.5G (multigigabit) |
| Buttons |
Reset button |
| LEDs |
Multi-function LED, LAN |
| Mounting and Physical Security |
|
| Multiple Mounting Options |
Mounting bracket included for easy ceiling or wall mounting |
| Physical Specifications |
|
| Physical dimensions |
9.0 x 9.0 x 1.5 in |
| Weight |
3.0 lb or 1360.78 g |
Network Capabilities
| Specifications |
Description |
| VLAN Support |
Yes |
| Number of VLANs |
1 management VLAN plus 16 VLANs for SSIDs (per radio) |
| 802.1X supplicant |
Yes |
| SSID-to-VLAN mapping |
Yes |
| Auto-channel selection |
Yes |
| Spanning tree |
Yes |
| Load balancing |
Yes |
| IPv6 |
Yes IPv6 host support IPv6 RADIUS, syslog, Network Time Protocol (NTP) |
| Layer 2 |
802.1Q-based VLANs, 32 active VLANs plus one management VLAN |
| DHCP Support |
Yes |
| Syslog Support |
Yes |
| Wireless Distribution System (WDS) |
Yes |
| Wi-Fi Multimedia (WMM) |
Yes |
| Quality of Service (QoS) |
Yes, Intelligent Quality of Service (QoS) |
| Wi-Fi Protected Setup |
Yes |
| Captive Portal |
Yes |
| RF Spectrum Analysis |
Yes |
| Single Point Setup |
Yes |
Security
| Specifications |
Description |
| WPA2 |
Yes, including Enterprise authentication |
| Access control |
Yes, management access control list (ACL) plus MAC ACL |
| Secure management |
HTTPS |
| Rogue access point detection |
Yes |
| 802.1X |
Yes, with RADIUS Authentication |
| Rogue Access Point Detection |
Yes |
Performance
| Specifications |
Description |
| Wireless throughput |
Up to 1.2 Gbps data rate (real-world throughput will vary) |
| Recommended user support |
Up to 128 connected users, 32 active users per radio |
| Multiple-Access Point Management |
|
| Single Point Setup |
Yes |
| Number of access points per cluster |
8 |
| Active clients per cluster |
240 |
| Management |
|
| Management protocols |
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour |
| Remote management |
Yes |
| Event logging |
Local, remote syslog, email alerts |
| Network diagnostics |
Logging and packet capture |
| Web firmware upgrade |
Firmware upgradable through web browser, imported and exported configuration file |
| Dynamic Host Configuration Protocol (DHCP) |
DHCP Client |
| IPv6 host |
Yes |
| Wi-Fi Schedule |
Can be configured to control Wi-Fi access during and after business hours. |
| HTTP redirect |
Yes |
| Wireless |
|
| Frequency |
Dual Concurrent radios (2.4 GHz and 5 GHz) |
| Radio and modulation type |
Dual radio, orthogonal frequency division multiplexing (OFDM) IEEE 802.11 a/n: OFDM(BPSK/QPSK/16QAM/64QAM/256AM) IEEE 802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) |
| WLAN |
802.11n/ac 3x3 MIMO with 2 spatial streams at 5 GHz 3x3 MIMO with 2 spatial streams at 2.4 GHz 20-, 40-, and 80-Mhz channels for 802.11ac 20- and 40-Mhz for 802.11n PHY data rate up to 2.8 Gbps 802.11 Dynamic Frequency Selection (DFS)
|
| Data rates supported |
802.11a/b/g:
802.11n: 6.5 to 300 Mbps:
802.11ac: 6.5 to 867 Mbps:
|
| Transmitted output power |
2.4 GHz, 5 GHz |
| System memory |
256 MB RAM 128 MB flash |
Revision History
| Revision | Publish Date | Comments |
|---|---|---|
1.0 |
10-Dec-2018 |
Initial Release |
Feedback