PDF(3.4 MB) View with Adobe Reader on a variety of devices
ePub(52.1 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(69.9 KB) View on Kindle device or Kindle app on multiple devices
Updated:August 24, 2017
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Get to Know the WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
The WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE is the newest addition to the roster of Wireless Access Points of Cisco. The WAP125 uses concurrent dual-band radio for improved coverage and user capacity. Gigabit Ethernet LAN interfaces with Power over Ethernet (PoE) facilitate flexible installation and reduce cabling and wiring costs.
To provide highly secure guest access to visitors and other users, WAP125 supports a captive portal with multiple authentication options and the ability to configure rights, roles, and bandwidth. Configure a cluster of WAPs for seamless roaming within a campus and manage them through a single IP address.
This article introduces you to the WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE.
Single Point Setup, a controller-less technology, simplifies the deployment and management of multiple access points without requiring additional hardware
High-performance Gigabit Ethernet port, enabling large file transfers and multiple users.
Multiple internal antennas
Intelligent Quality of Service (QoS) prioritizes network traffic to help keep critical network applications running at top performance
Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades.
Simple installation and intuitive web-based utility
FindIT Network Management Support
Stand for easy desktop deployment of the WAP
a.) WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE Ethernet cable
b.) Ethernet cable
c.) Getting Started guide
d.) Power adapter
A switch or router that has PoE support, PoE injector, or AC power adapter
Java-enabled web browser for the web-based configuration
LAN IP Address
Fallback LAN IP
Front Panel View
The front panel shows the Cisco logo and the Multi-function LED.
Back Panel View
The back panel shows the Reset button, 12VDC 2.5A power adapter port, LAN port with Power over Ethernet, Power button, and the Kensington lock slot.
Bottom Panel View
At the bottom panel, the sticker showing some information about the device such as the exact model number with the device description, the power specifications, the serial number, the MAC address, and other vital information can be seen.
Multifunction System LED
The WAP361 is out of power
Solid – At least one wireless client is connected to the WAP.
Blinking – Firmware upgrade is in process
Solid – No wireless clients are connected
Blinking – WAP361 is booting
Solid – WAP361 fails to boot with both firmware images
Located on the left of the port. The light goes steady when a link between the corresponding port and other device is detected. The light flashes when the port is passing traffic.
(Amber) Located on the right of the port. The light goes steady when power is being supplied to a device attached to the corresponding port.
Note: To know more about the product specifications of the WAP125, click here.