Syslog Configuration for Individual Access Points in CBW

Available Languages

Download Options

PDF (80.9 KB)
View with Adobe Reader on a variety of devices
ePub (133.9 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (209.2 KB)
View on Kindle device or Kindle app on multiple devices

Updated:April 24, 2023

Document ID:1677530276489605

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

kmgmt3516-syslog-config-individual-ap-cbw

Objective

The objective of this article is to show you how to configure syslog settings for individual access points (APs) or mesh extenders (MEs) in Cisco Business Wireless (CBW) devices.

Applicable Devices | Software Version

CBW140 | 10.8.1.0 (Download latest)
CBW145 | 10.8.1.0 (Download latest)
CBW240 | 10.8.1.0 (Download latest)

Introduction

In your network, System Message Log or Syslog messages are generated on Cisco devices whenever an event takes place. The Syslog feature logs the system events to a remote server called a Syslog server. Each Syslog message contains details of that event that can help you or your administrator to troubleshoot network problems.

In CBW firmware version 10.8.1.0, you can now configure individual APs and MEs to send their log files to a syslog server. This could be helpful when tracking down an issue that appears to be affecting a specific AP or ME.

Check out Setting Up System Message Logs (Syslogs) on a CBW Network to set and review logging in a CBW network.

Configure Syslog of Individual AP

Step 1

Step 2

Navigate to Monitoring > Network Summary > Access Points.

Step 3

You will be able to view the list of APs and MEs currently operating in the deployment. Click on the specific AP/ME you wish to configure. In this example, CBW140-1 is selected.

Step 4

Scroll down and click on the Syslog tab.

Step 5

Configure the Syslog Server IP address, the logging level, and whether logging is enabled or not. Click Apply.

The syslog server can only be configured by IP address and not by hostname of fully qualified domain name (FQDN).

Conclusion

It is as simple as that! You have successfully configured the Syslog feature of an individual AP in your CBW network.

If you are looking for more articles on CBW, click on any of the tags below!

Revision History

Revision	Publish Date	Comments
1.0	24-Apr-2023	Initial Release