PDF(44.7 KB) View with Adobe Reader on a variety of devices
ePub(77.1 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(144.1 KB) View on Kindle device or Kindle app on multiple devices
Updated:July 27, 2017
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Enable a Line on the SPA100 Series Phone Adapter
When the line is enabled, voice services can be established through the lines for the respective phone ports. This article explains how to enable different lines on the SPA100 Series Analog Telephone Adapter, so that two users can communicate directly (for example General Manager to Account Manager).
• SPA112 • SPA122
Step 1. Log into the Phone Adapter Configuration Utility and choose Voice > Line1 or Line2. The Line 1 page opens:
Note: The configurations to enable Line 1 are applicable to Line 2.
Step 2. Choose yes from the Line Enable drop-down list. This enables the line and all other configurations can be made on this line.