Assign VLAN ID on SPA122

Available Languages

Download Options

  • PDF     (28.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (67.2 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (85.9 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB2678

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Assign VLAN ID on SPA122

Objective

A Virtual Local Area Network (VLAN) allows a group of hosts that are not connected to the same switch to communicate as if they were on the same broadcast domain. If VLAN is disabled, all traffic tagged with a VLAN ID coming in from the wired side is dropped. If the VLAN is enabled then it is forwarded. This article explains how to configure and assign a VLAN ID on the SPA122 VoIP device.

Applicable Devices

• SPA122

Software Version

• v1.1.0

Assign VLAN ID

Step 1. Log in to the web configuration utility and choose Network Setup > Advanced Settings > VLAN. The VLAN page opens:

Step 2. Click the Enabled radio button to allow the VLAN packets to pass between the wired and wireless interfaces that are on the same VLAN.

Step 3. Enter the desired VLAN ID number in the VLAN ID field. The default value is 1.

Note: The VLAN ID can be any number from 1 to 4094.

Step 4. Click Submit. The changes are configured and the device is updated.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products