Bonjour Configuration on the SPA100 Series

Available Languages

Download Options

PDF (17.3 KB)
View with Adobe Reader on a variety of devices
ePub (58.8 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (74.6 KB)
View on Kindle device or Kindle app on multiple devices

Updated:November 29, 2018

Document ID:SMB2662

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Bonjour Configuration on the SPA100 Series

Objective

Bonjour is a service discovery protocol that locates devices on a local network such as printers, computers, switches, and the services that those devices offer. Bonjour can be enabled on the SPA100 series devices so that all the devices on the same network know that the SPA100 is connected to the network. Bonjour is used to discover devices connected to the ATA and use them for different purposes such as office work, uploading information to devices, downloading information from devices, and the configuration of the devices discovered.

The objective of this article is to either enable or disable Bonjour on the SPA100 Series Phone Adapters.

Applicable Devices

• SPA100 Series Phone Adapters

Software Version

• v1.1.0

Bonjour Configuration

Step 1. Log in to the web configuration utility and choose Administration > Management > Bonjour. The Bonjour page opens:

Step 2. (Optional) Click the Disabled radio button if the administrator wants to disable this feature. The Bonjour feature is already enabled on the ATA adapter by default.

Step 3. Click Submit. The changes are configured and the device is updated.