Edit Last TFTP Server on the SPA300/SPA500 Series IP Phones

Available Languages

Download Options

  • PDF     (194.9 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (223.1 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (249.4 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:May 7, 2017
Document ID:SMB2138

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Edit Last TFTP Server on the SPA300/SPA500 Series IP Phones

Objectives

TFTP is a simple file transfer protocol. It is used to transfer small amounts of data between devices. Editing allows the user to say which server to access from the phone.

This document describes how to view the network configuration of the SPA300 and SPA 500 series IP phones using the soft key interface.

Applicable Devices

• SPA300 series IP phones
• SPA500 series IP phones

View Network Configuration

Step 1. Push the Set Up soft key.

Step 2. Push the soft key for Settings.

Step 3. Push the soft key for Network Configuration.

Step 4. To unlock the Last TFTP Server option, dial the number it is on.

Step 5. Push the button under Edit.

Step 6. Change the TFTP server to the desired one.

Step 7. Push the button under OK.

Step 8. Push the button under Save.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco