The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Model Information page is useful to the user because it displays the model number, MAC address, serial number, software version, hardware version, call control protocol, and whether the client certificate is installed or not. This information will help when the user needs to know if the device is up-to-date or not.
This document describes how to view the model information of the SPA300 and SPA 500 series IP phones using the soft key interface.
• SPA300 series IP phones
• SPA500 series IP phones
Step 1. Push the Set Up soft key.
Step 2. Push the soft key for Settings.
Step 3. Push the soft key for Model Information. The model Information is displayed on the screen.