The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Speed dial is used to quickly call numbers that are often used. This option is used in place of dialing the entire phone number.
The objective of this document is to guide you on how to configure speed dial on the SPA300 and SPA500 Series IP Phone.
• SPA500 Series IP Phone
• SPA300 Series IP Phone
Step 1. Press the Setup button on the IP phone and choose Speed Dial.
Step 2. Use the navigation keys and choose the number of the speed dial you wish to set between 2-9, and press Edit.
Step 3. Use the DelChar button to delete the last character or Clear button to clear the telephone number. Use the number keys to input the telephone number.
Step 4. Press OK.
Step 5. Press Save to save the settings, or press Cancel to discard the settings.